Service not available after a restart of the server

Similar Questions

• Could Calendar services not available after restarting LDAP problem?

  I followed the installation guide:
  
  https://wikis.Oracle.com/display/CommSuite7U2/communications+suite+on+a+single+host+%28Linux%29#CommunicationsSuiteonaSingleHost%28Linux%29-InstallingCommunicationsSuite7Update2Software
  
  I have correctly installed and configured the Server Update 2 Oracle UCS Sun7. Calendar works (if I don't reboot the server).
  
  
  However, when I reboot the server, calendar service is not available.
  
  
  Important information for when I installed Oracle UCS Dim 7 update 2 by following the installation guide:
  
  I noticed when browsing through files, there is already a folder "dsee6" for the Linux Oracle I started from. After the installation of the example for the Oracle Linux 5 with GlassFish install, I had to download a new directory server. By following the instructions on page 7 of the listed installation guide above, I did another folder "dsee7". I wonder if I would have never downloaded this new directory server by following the instructions on page 6 "obtain software". In fact, the installation guide does not mention where to find the directory server, so I went to the site of delivery and figured it out myself. in any case, in the section 'Installing and configuring directory server', #3, I was instructed to "mv dsee7/opt/sun/directory. In this folder, / opt/sun/directory/bin, there is '. '. "/ dsadmin" utility that can be run. This serves to do many things with the directory server, including start-up. This is how I started it:
  
  CD/opt/sun/directory/bin
  . / create/var/opt/sun/directory/dsins1 dsadm
  . / dsconf create suffix '0 = isp.
  
  Also, I downloaded the delivery directory server - Oracle Directory Server Enterprise Edition 11 GR 1 material Patch Set 1 for Linux x 86-64
  
  Then, I found myself running to implement:
  
  . / dsccsetup ads - create
  . / dsccsetup war-file-create
  $. / dsccsetup cocoa-reg
  . / dsccsetup State
  
  Then, it seemed that dcss agent is registered in the cocoa.
  
  So, if we pass to come to page 9 of the installation, "Preparation of the directory" guide, I ran this and prepared the directory. After installation is finished, I could restart the server directory without any problems, as long as I do not restart the machine. I would like to restart the server directory as follows:
  
  CD/opt/sun/directory/bin
  . / dsadmin stop-domain domain1
  . / dsadmin start-domain domain1
  
  However, if I rebooted the machine, I could always start and stop the server directory as shown. But the calendar Services were not available.
  
  The only reason I question this LDAP server that can be the cause of this is because at one point, I had configured the services to run at startup. I followed these instructions:
  
  https://wikis.Oracle.com/display/CommSuite7U2/start+and+stop+scripts+for+communications+suite+%28Linux%29
  
  I use a VMSphere client to host this set upwards. So, given that this point the configuration of services at startup, I rode hanging at the rear so that services are more fixed upward to run at startup. But when they were, and I restarted the machine, I could see 389 ldap errors in all directions. So, which drive me to roll my snapshot in effort to try to correct the ldap errors. I no longer get LDAP errors as I drove my instant return. But, as I said, I have no more services, including LDAP, to start Protocol started as shown in the above link that tells us how.
  
  After restarting, I run these commands to get the server up and running:
  
  Start the GlassFish server:
  CD/opt/sun/SUNWappserver/bin
  . / startserv
  
  Web start (mail server I think):
  CD/opt/sun/comms/messaging64/bin
  . / Start-msg
  
  Start LDAP (directory server)
  CD/opt/sun/directory/bin
  . / dsadm start/var/opt/sun/directory/dsins1
  
  Start Mysql
  CD/etc/init.d
  . / mysqld start
  
  All these commands complete without problem. I can connect on the web of convergence, I can hit the Managing Director, I can connect to the GlassFish administration console, and I can see my calendar folder when I hit him in the web (http://myServer.com/davserver/dav/home/userName/calendar/).
  
  So, in summary, I was wondering if anyone knows if it assumed that second directory server is causing problems since I started with Oracle Linux 5 and Oracle Linux 5 seems to have the dsee6 file already installed with it. Would be - why my calendar services do not start after reboot, but work before the reboot?
  
  
  (Also, all my messages to keep deleted.) Can someone please send me an email if someone Oracle is deleting my messages and tell me why they are removed? )
  
  Published by: ntfytim16 on March 5, 2012 07:41
  
  Some of my steps were unserviceable. Cleaned them is easier to understand.

  You stop/start the GlassFish server container:

  https://wikis.Oracle.com/display/CommSuite/Calendar+Server+7+Administration+Guide#CalendarServer7AdministrationGuide-StoppingandStartingCalendarServer

  Joe

• Session variables are available after a restart of the session?

  Hello
  I have a package when I update some variables. All these variables are "non-persistent". In case of error, the values of the variables will keep after you restart the session? Do I have to put my variables 'historize' or 'value' last to achieve this? Any help is appreciated

  Ok

  Overall, a new instance of the variable, which is "declared" then put it in the stream as a first step.

  I tried on my side and works well...

• How do I resolve the error "421 Service not available.

  Hello
  
  Can someone help to solve the "421 Service not available" error I tried to send emails with three different smtp servers.
  
  the error I get this error: -.
  
  ERROR on line 1:
  ORA-20000: cannot send an e-mail: ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." SEND_MAIL', line 34
  ORA-06512: at line 1
  
  
  Thanks in advance
  Uttam Singh

  This problem on the SMTP server.

  You should check with the system administrator.

  Maybe your server via SMTP SSL SMTP.

  problem sending mail with UTL_SMTP (STARTTLS)?

  or try

  UTL_SMTP.command (conn, 'STARTTLS');

• Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted

  Windows 7 Ultimate: Explorer is not refreshed after deleting a file, the deleted file still appears in the window, on the manual "Refresh" the file is deleted.

  I have also changed the CLASSID HKEY_LOCAL_MACHINE\SOFTWARE\Classes\CLSID\ {BDEADE7F-C265-11D0-BCED-00A0C90AB50F} / instance DontRefresh value to 0

  Hello

  (1) have you made changes before the start of this issue?

  (2) what happens when you try to start in safe mode?

  To start your computer in safe mode, you can see the link below:

  http://windowshelp.Microsoft.com/Windows/en-us/help/323ef48f-7b93-4079-a48a-5c58eec904a11033.mspx

  I suggest you to place the computer in a clean boot state and check if the problem is resolved:

  1. sign the computer by using an account with administrator rights.

  2. click on Start, type msconfig.exe in the Start Search box and press ENTER to start The System Configuration utility. If you are prompted for an administrator password or for confirmation, type your password, or click continue.

  3. on the general tab, click Selective startup, and then click on to clear the load startup items check box. (The check box use the file Boot is not available.)

  4. on the Services tab, click to select the hide all Microsoft services check box, and then all disable.

  5. click OKand then click restart.

  6. check if you still have the problem.

  See the link below for more details:

  How to troubleshoot a problem by performing a clean boot in Windows Vista

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual after you have finished troubleshooting, follow these steps to reset the computer to start as usual:

  Click Start , type msconfig.exe in the Start Search box and press ENTER.

  1. If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  2. on the general tab, click the Normal startup option, and then click OK.

  3. When you are prompted to restart the computer, click restart.

  If this does not work, try to run a SFC scan. To do a SFC scan follow the steps below:

  Use the System File Checker tool, which is also called scan SFC.

  File system (CFS) auditor verifies that all Vista system files are where they should be as they are by default and not corrupted, changed or damaged.

  1. click on Start, click principally made programs, Accessories, right-click on command promptand select Run as Administrator.

  2. click on continue or provide administrator credentials if prompted.

  3. in the command prompt window , type the following, and then press ENTER:

  sfc/scannow

  4. you should see messages on the screen the following:

  From the analysis of the system. This process will take time.

  Start of the phase of verification of the scanning system.

  % Of verification complete.

  5. once scanning is complete, check to see if the problem you are experiencing is resolved or not.

  Hope the helps of information.

• two-factor authentication is not available for your apple at the moment ID

  (two-factor authentication is not available for your apple at the moment ID), how can I solve this problem? I can't run many features such as Apple Watch unlock in Sierra, please help

  I had this same problem, the message that, ' two-factor authentication is not available for your apple at the moment ID. " All my devices have been updated to the latest version of the software, and all other requirements have been met. I couldn't use two-factor authentication and I couldn't open my mac using my Apple Watch.  After contacting the Apple Support, they told me that because I had an email address @mac.com older, this address was not "verified." And that the system was not able to verify the address by sending an email with a link as it does normally; He could do that for more recent @me and addresses of @icloud. Apple had to have a service technician manually to send me an email of check to my address @mac.com. I clicked on the link in the email (I don't need to enter other information), and two factors was not available instantly. Hope that you will find your problem will be solved.

• E.M.P. automate connection due to lack of EPMAT - 11:Service not available

  I'm currently trying to create some automatisms to connect and a dimension to export. My only question is based on what the EPM automate tells me that I need to settings does not work. Can anyone help?

  These are the settings he seeks and below is what I got.

  D:\Oracle\EPM Automate\bin > epmautomate login help

  Use: epmautomate login username password url identitydomain

  Parameters:

  user administrator user name to run the following commands

  password of the user

  URL Url of the server cloud environment

  Syntax: http[s]://abcd.oracle.com:1234

  identitydomain domain name of identity within the public cloud oracle s

  service

  Syntax: OxcorpProduction

  epmautomate connection [email protected] JoesPassword

  https:// company23411.PBCs.US2.oraclecloud.com company23411

  The above syntax is just returned with

  EPMAT - 11:Service not available

  Help, please.

  Yes you are right, you don't need to specify the connection method again.

  I think my encryption came out like that. You can stick and give it a try. file .prefs is created right after a successful login, since you aren't able to do I am trying to see if you can manually creating the file.

  Concerning

  Celvin Kattookaran

• I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I have Safari 9.1, El Capitan. The changes I make in the Safari preferences are not saved after that I close the program. There is no such thing as a Library/Preferences/Safari. What should do?

  I think you're looking in the root folder not your home folder.   Tilde ~ in front of the first slash indicates the folder.

  Try this...

  Quit Safari.

  Open a Finder window. In the Finder menu bar, click go > go to folder

  Type or copy paste the following text:

  ~/Library/preferences/com. Apple.Safari.plist

  Click OK, and then move the com.apple.Safari.plist file to the trash.

  Restart Safari to test.

• A necessary component of widows media center is not available. Please restart Media Center

  Original Windows Media Center title: Vista will not work.  Can not burn discs.

  Have Vista Windows Media Player and when I try to start it says. A necessary component of widows media center is not available. Please restart Media Center. Nothing happens! When I try to burn a disc, it says. A problem when burning the file to disk. For any additional help, click Help on the Web. Nothing happens.

  Hi Stephendoty,

  (1) in order to clarify, the error message appears when you start Windows Media Player or Windows Media Center?

  (2) since when are you facing this problem?

  (3) remember to make changes?

  Method 1: users have solved similar issue by following the steps outlined in the article below. You can run the fixit available in the link below

  When I try to use Windows Media Player 11, the program does not start, or some UI elements are blank
  http://support.Microsoft.com/kb/925704

  (The section applies to Windows Media Player, described steps works great for Windows Media Center)

  Method 2: If a Protection of resources Windows (WRP) file is missing or is damaged, Windows may not behave as expected. Auditor of file system (CFS) scan to fix all of the corrupted system files. To do this, follow the steps mentioned in the link below:

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

• HttpConnection MDS Service not available

  Hello

  Ive deployed an application to my Blackberry 9700.

  When I test the app I get an error ' MDS Service not available: u12f.

  I don't get this error when I use the Simulator.

  I use the following code.

  factory = DocumentBuilderFactory.newInstance();
  builder = factory.newDocumentBuilder();
  httpConnection = (HttpConnection) Connector.open(url+ ";ConnectionTimeout=9000");
  inputStream = httpConnection.openInputStream();
  document = builder.parse(inputStream);
  

  Strange thing is I have access to the internet and my phone is running through BES.

  What is a proxy thing? Y at - it code to determine that the device uses to access the internet?

  Please help me

  Thank you

  Ah ok, I realized that blackberry can connect to the internet in a number of ways, and the program should check for the latter.

  The answer of

  http://blog.accelgolf.com/2009/05/22/BlackBerry-cross-carrier-and-cross-network-HTTP-connection

  Thank you

• Sorry, Windows 8 is not available for purchase online in the country, in that you are. I'm in Iowa.

  I am trying to upgrade my computer to Windows 8, but after that I put in my product key, it says "sorry, Windows 8 is not available for online purchase in the country/region, you're in." I tried it on two different computers on two different sources on the internet. So I think that it's the product key, but I don't know and I don't know what to do.

  Hello

  From your problem description, I understand that you are not able to buy Windows 8. Please let me know if you do not experience this problem.

  I suggest you to contact Microsoft Support and buy windows 8.
  https://www.windowsupgradeoffer.com/en-in/home/ContactCustomerSupport
  http://www.microsoftstore.com/store/msstore/HTML/pbPage.Help_Site_Contact_Us

  Hope this information is helpful and let us know if you need help with Windows in the future. We will be happy to help.

• UTL_MAIL works do not, but apex_mail... any ideas? (SMTP transient error: 421 Service not available)

  Start

  () UTL_MAIL. Send

  recipients = > ' [email protected] ',

                 sender       => ' [email protected] ',

  subject = > "this is an issue."

  message = > 'This is a message');

  end;

  ORA-29278: SMTP temporary error: 421 Service not available

  ORA-06512: at "SYS." UTL_MAIL", line 654

  ORA-06512: at "SYS." UTL_MAIL", line 671

  ORA-06512: at line 2

  Start

  apex_mail. Send

  (

        p_to       => ' [email protected] ',    

  p_from = > ' [email protected] ',  

  p_subj = > 'this is a topic. "

  p_body = > 'This is a message'

  );

  apex_mail.push_queue ();

  end;

  Works very well.

  (of course, I use the correct recipient/sender names).

  For what it's worth, I have a second server with the same ACL settings and utl_mail is working on that one, but I don't know what is different.

  Any help much appreciated.

  You will get an ORA-29278 if you smtp_out_server instance parameter is not assigned to a working SMTP service.

  --

  John Watson

  Oracle Certified Master s/n

• Service not available error with SSAS cube

  Hello

  We have imported Microsoft Analysis Services (SSAS) by using XMLA RPD Cube.  While using the drill down one-touch in BI answers using hierarchies of presentation, OBIEE generates the following error

  
  

  Error codes: OPR4ONWY:U9IM8TAC:OI2DL65P

  Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error occurred. [nQSError: 43113] The message returned by OBIS. [nQSError: 43119] Query failed: URL: http://< Server > / < application name > / msmdpump.dll. The http return status is 503. < html > < head > < title > Service not available < / title > < / head > < body > Service not available < body / > < / html >

  However, drill down one-touch works very well with the attribute columns. Alsoit stand is works well up to certain level of zoom. In the journal, it is obvious that OBIEE generates multiple physical queries (with clause) to extract the data in the cube.

  Is there a limit on the size of the mdx or number of mdx queries that msmdpump.dll can treat?  Is there any configuration to be changed when you are working with SSAS cubes?

  Version OBIEE: 11.1.1.6.2 BP1

  Very much appreciate your time.

  The error is due to the inadequacy of the maximum number of connections in the connection pool and the MaxThreadsPerClient of XMLA parameter in analysis services.

  The default values are 10 and 4, respectively. Then adjust the number of values of connections in the connection pool and MaxThreadsPerClient of XMLA will solve the problem.

• Deploy and host not applied after you restart car profiles

  Just started playing with Auto deploy and profiles of the host, all of this work have to expect one thing.

  The profile of the host is not applied after you restart, the profile is selected but not applied.

  If I choose 'Apply the profile' Server applies the profile, take this into maintenance mode and it works as it should.

  This should not happen automatically after reboot? And what files newspapers can I look to fix this?

  Any help would be appreciated.

  Yes. You can attach a profile - even if the host is a host running VMs - worms and you can take a look if it is already compatible or not, before it is put in maintenance mode and apply the profile settings. You can even attach a profile to a cluster if you do not need to click on all hosts.

• SMTP service not available

  Hello
  
  How to send mail via the following code?
  
  CREATE OR REPLACE PROCEDURE send_mail (p_to IN VARCHAR2,
  P_FROM IN VARCHAR2,
  p_message IN VARCHAR2,
  p_smtp_host IN VARCHAR2,
  p_smtp_port in DEFAULT NUMBER 25)
  AS
  sys l_mail_conn. UTL_SMTP. Connection;
  BEGIN
  l_mail_conn: = sys. UTL_SMTP.open_connection (p_smtp_host, p_smtp_port);
  sys. UTL_SMTP. HELO (l_mail_conn, p_smtp_host);
  sys. UTL_SMTP.mail (l_mail_conn, p_from);
  sys. UTL_SMTP. RCPT (l_mail_conn, p_to);
  sys. UTL_SMTP. Data (l_mail_conn, p_message |) UTL_TCP. CRLF. UTL_TCP. CRLF);
  sys. UTL_SMTP. Quit (l_mail_conn);
  END;
  /
  
  
  BEGIN
  send_mail (p_to = > '[email protected]',)
  P_FROM = > '[email protected] ',.
  p_message = > "This is a test message."
  p_smtp_host = > 'mail.google.com');
  END;
  /
  
  
  ERROR:
  
  ORA-29278: SMTP temporary error: 421 Service not available
  ORA-06512: at "SYS." UTL_SMTP", line 20
  ORA-06512: at "SYS." UTL_SMTP", line 96
  ORA-06512: at "SYS." UTL_SMTP", line 138
  ORA-06512: at the 'APPS '. SEND_MAIL', line 9
  ORA-06512: at line 2
  
  
  Please, help me get through the error.
  
  
  Thanks in advance,
  Pradeep
  
  Published by: user11165897 on December 7, 2012 02:27

  Hello

  Here, all input values are false.

  By providing the correct host, email, port, it works fine now...

  Pradeep