Service Pack 3 Setup cannot update a checked ( debug ) system with a free ( retail ) version of Service Pack 3, or vice versa.
Hello
1. How do you try to install Windows XP service pack 3?
2 did you change on your computer before this problem?
You can follow the suggestions and check out them.
Method 1
You can follow the procedure in the article.
How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718
Note: Antivirus can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.
Method 2
You can reset the grocery store.
a. click on start, then run.
b. type %userprofile%\Local Settings\Application Windows and press OK.
c. remove all files in the folder.
Note: You can export the workflow before you restore it and import it on the computer.
See also:
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
Note: Antivirus can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attack.
Learn how to install Windows XP Service Pack 3 (SP3)
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Tags: Windows
Similar Questions
-
Service Pack 3 Setup error: "Service Pack 3 Setup cannot update an active (debug) system with a free (retail) version of Service Pack 3, or vice versa"
I have XP SP3 download Tuff. I have a Dell Inspiron 16000 w / XP Edition home (version 2002) W / SP 2 is installed. I couldn't find a reference to the error in line last night. Can anyone help?
Turbo Tax 2011 says that I can not download their stuff until I get my XP Stuff to the height.
Only 6 more days until what the tax man will come :-)...
Help!
Put your search inside the quotes term allows when you search for the exact error messages:
"Service Pack 3 installation cannot update an active (debug) system with a free (retail)"
The first shot has the answer: http://www.askvg.com/windows-xp-sp3-setup-error-cannot-update-a-checked-debug-system-with-a-free-retail-version-of-service-pack-3/
CurrentType at HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion value should read "Uniprocessor Free" or "free multiprocessor".
John
-
I have the same problem and I tried to solve the problem by following your steps, but I can't find the 'current type' string value in the right pane... Please help me!
Separated from the:
Thoughts, Salvation
In order to focus more on your particular situation, I shared your post into a new thread. Please take a look at this issue similar here with a solution as possible.
I hope this helps!
-
KB952155 Setup Error.
While trying to upgrade to remote desktop I get the following error message: Setup cannot update your Windows XP files because the language installed on your system is different from the update language. Now, that - what it means and how can I fix it? I have installed SP3Eivind Aakhus Hello,
If you have the latest version of Office installed on your computer remotely, then you need to enable the Active X control.
Follow these steps to activate the ActiveX module.
a. open Internet Explorer by clicking the Start button, and then click Internet Explorer.
b. click Tools, point to manage add-ons and then click Enable or disable add-ons.
c. in the list view, click to view all ActiveX, ActiveX controls downloaded controls.
d. choose the one you want to activate, and then select Enable.
-
When will the new raw update for Adobe Lightroom 4 with support Nikon D750 version come?
Hello Adobe,
When will the new raw update for Adobe Lightroom 4 with support Nikon D750 version come?
Best regards
Frank
There will be an update to Lightroom 4. The only way that you can work with your raw D750 files is to use the autonomous and free DNG Converter to create DNG copies. If you want to be able to work on the NEF files, then you must upgrade to Lightroom 5. Lightroom does not use plug in Camera Raw. everything is part of the Lightroom program. If you want to stay up-to-date with Lightroom, you must follow the path of update/upgrade. This means than buying each new major version of Lightroom or you subscribe to plan creative cloud.
-
I am trying to install windows 7 on my emachines T6520 in with a single hard drive. so far, I can get to where it says select the partition. so I select the single partition it and it gives me this error "cannot create a new partition system or locate an install" ive tried EVERYTHING. I have only plugged in the USB is a MI to help install windows from. This time the boot priority is hard disk and then cd rom. ive google search for days and nothing helps. I have the windows installation disc, but whenever I boot from the disc it loads the configuration files and then right until he finishes it says "unexpected error" and I can reboot or turn off the computer, that's why im starting on a USB key. Ive also tried DBAN and no luck. Help, please!
Hello
I suggest you view and perform the steps from the following link to install Windows 7.
Installation and reinstallation of Windows 7
Always if you have any problems in installing Windows 7 perform the steps from the following link.
-
Cannot update or reinstall Acrobat reader or Acrobat free trial
Had an error on windows update to acrobat reader. Remove the drive and tried reinstalling. Reinstall failed, "new version already installed. Control Panel displays not only any drive on your computer. I tried the fixes recommended to no success. Help? Windows 7.
Hello
I recommend you use the cleanup tool to uninstall the left on the tracks of the version you have installed.
Download Adobe Reader and Acrobat cleaning tool - Adobe Labs
Once uninstalled, you might check out the following link to download the player using the link below.
https://get.Adobe.com/reader/Enterprise/
Concerning
Sukrit diallo
-
Cannot update iTunes on Windows 7 with Apple Software Update
I use Windows 7 with Boot Camp and I'm trying to use Apple Software Update to download the 12.3.2 version of iTunes. It gives me a download bar, but said only: "download (0.00/37.90 MB) and remains static and won't actually download anything.» Any ideas?
Just download.
-> https://www.apple.com/itunes/download/
In addition, you must run the update software for your Mac OS.
-
Hello
I just build a new complete PC and decides to get Windows 7 Pro for it. It cost me £179 on amazon from a seller who has good reviews.
All looks well and many of such security features mentioned on this site:
http://www.Microsoft.com/en-us/howtotell/software.aspx#packaging
Are in place (change holograms that you change the view, etc.). However when I enter the product key, I get this message:
"Code:
0xC004C008
Description:
The activation server determined that the specified product key cannot be used. »
I tried to go there several times, checking the caps lock etc.. The version says ' origin: Ireland ' on the insignia case of authenticity and the seller told me that before I bought it and it would work as a version of the United Kingdom's retail. The additional complication is I am currently based in France (where I tried to activate it since), but as an English speaker needed an English language version of Windows.
I have run the MGADiag.exe and this is the output:
Diagnostic report (1.9.0027.0):
-----------------------------------------
Validation of Windows data-->Validation code: 0
Validation caching Code online: n/a, hr = 0xc004f012
Windows product key: *-* - 3JFJD - CCDF2-FG2FM
Windows product key hash: ISQ35i4q42ikuqdQBUxMHE34lYY =
Windows product ID: 00371-178-3035863-85174
Windows product ID type: 5
Windows license type: retail
The Windows OS version: 6.1.7601.2.00010100.1.0.048
ID: {8E129A9F-9F41-4731-9844-7C30E786DAAC} (1)
Admin: Yes
TestCab: 0x0
LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Product name: Windows 7 Professional
Architecture: 0 x 00000009
Build lab: 7601.win7sp1_gdr.140303 - 2144
TTS error:
Validation of diagnosis:
Resolution state: n/aGiven Vista WgaER-->
ThreatID (s): n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002Windows XP Notifications data-->
Cached result: n/a, hr = 0 x 80070002
File: No.
Version: N/a, hr = 0 x 80070002
WgaTray.exe signed by: n/a, hr = 0 x 80070002
WgaLogon.dll signed by: n/a, hr = 0 x 80070002OGA Notifications data-->
Cached result: n/a, hr = 0 x 80070002
Version: N/a, hr = 0 x 80070002
OGAExec.exe signed by: n/a, hr = 0 x 80070002
OGAAddin.dll signed by: n/a, hr = 0 x 80070002OGA data-->
Office status: 109 n/a
OGA Version: N/a, 0 x 80070002
Signed by: n/a, hr = 0 x 80070002
Office Diagnostics: 025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3Data browser-->
Proxy settings: N/A
User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
Default browser: E:\Program Files\Pale Moon\palemoon.exe
Download signed ActiveX controls: fast
Download unsigned ActiveX controls: disabled
Run ActiveX controls and plug-ins: allowed
Initialize and script ActiveX controls not marked as safe: disabled
Allow the Internet Explorer Webbrowser control scripts: disabled
Active scripting: allowed
Recognized ActiveX controls safe for scripting: allowedAnalysis of file data-->
Other data-->
Office details:{8E129A9F-9F41-4731-9844-7C30E786DAAC} 1.9.0027.0 6.1.7601.2.00010100.1.0.048 x 64 *-*-*-*-FG2FM 00371-178-3035863-85174 5 S-1-5-21-1057973280-206651885-4209766832 Gigabyte Technology Co., Ltd.. Power O.E.M. American Megatrends Inc.. F4 20130603000000.000000 + 000BBF33407018400FE 0809 0409 GMT Standard Time(GMT+00:00) 0 3 109 Content Spsys.log: 0 x 80070002
License data-->
The software licensing service version: 6.1.7601.17514Name: Windows 7 Professional edition
Description: operating system Windows - Windows (r) 7, retail channel
Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
Extended PID: 00371-00170-178-303586-00-2057-7601.0000-2312014
Installation ID: 012672003725001920553945525285701895526734611280842880
Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
Partial product key: FG2FM
License status: initial grace period
Time remaining: 41820 minute (s) on (29 day (s))
Remaining Windows rearm count: 3
Trust time: 19/08/2014-18:43:31Windows Activation Technologies-->
HrOffline: 0x00000000
HrOnline: n/a
Beyond: 0 x 0000000000000000
Event time stamp: n/a
ActiveX: Registered, Version: 7.1.7600.16395
The admin service: recorded, Version: 7.1.7600.16395
Output beyond bitmask:--> HWID data
Current HWID hash: MAAAAAEAAQABAAEAAAACAAAAAwABAAEAln0clqxHcu5monJWumUQtzoC7tclw5ZjActivation 1.0 data OEM-->
N/AActivation 2.0 data OEM-->
BIOS valid for OA 2.0: Yes, but no SLIC table
Windows marker version: N/A
OEMID and OEMTableID consistent: n/a
BIOS information:
ACPI Table name OEMID value OEMTableID value
ALASKA APIC HAS M I
FACP ALASKA A M I
HPET ALASKA A M I
ALASKA MCFG A M I
SSDT SataRe SataTabl
SSDT SataRe SataTabl
SSDT SataRe SataTabl
LAURENCE INTEL SNB----------------------------------------
I so I spent £179 on a version false? Any help is greatly appreciated.
Zak
A little update just for your information. 2 days and 5 calls later (I needed to technical management, through the population of Activation - no direct number so sometimes the transferred call didn't work!) I now have a version of Windows active :) work
However the question turns out to be that my legitimate version (package and all disks of good mine) and it's legitimate keys used did not match exactly.
The unused key was for a version of Windows 7 Edition product update Home Premium to Windows 7 Pro, so that's why it did not work on the new facility I was trying.
I contacted the seller amazon to let them know about this problem as it is possible that there is a lot that is perhaps not entirely legitimate.
Once again thanks to the MVP here and people I talked on the phone before this is resolved, I suspect that this could become a problem growing with Windows 7, as people are not super keen on 8 and 7 is a solid BONE with a little support left? So even if you pay a rate of 'good' for your Windows 7 disks, be aware that you can not get exactly what you expected, and maybe it would be nice if MS has always sold direct to counter this kind of question?
Thanks again to both for your advice, MVP
Yours sincerely,
Zak.
-
Installing Win AP Automation! 3.0 to accelerate VB Express 2010.
Warning message:
Update for MS Wim (KB971513) Setup error
Setup cannot update your Windows XP files because the language installed on your system is different from the update language.
My XP language is Norwegian. The rest of my 'stuff' MS is English.
- What you have already tried to solve the problem
Hello
I suggest you to check the article mentioned below.
Error message: Setup cannot update your Windows XP files
http://support.Microsoft.com/kb/555042
I suggest to select the language appropriate to the download page and check if you are able to install the update on the system or not. The update that you are trying to install on the system must be of the same language as installed.
Thanks and regards.
Thahaseena M
Microsoft Answers Support Engineer.
Visit ourMicrosoft answers feedback Forum and let us know what you think. -
The installation fails every time with this error. I can see and select the file in the temp folder, but it won't work. Any help would be appreciated. '
Original title: 'Setup cannot copy the file els.dll' during the upgrade to Windows XP SP2 to SP3.
In fact, I corrected it an hour ago and was meaning that close the message. I cleaned with CCleaner temporary files, downloaded the SP3 Installer on its own (no windows update) and disabled the antivirus. I was able to complete the installation.
Thanks for the reply!
-
I cannot update KB953297 can someone tell me how, or is it important? I use Windows XP
I cannot update KB953297 can someone tell me how, or is it important? I use Windows XP
When installing updates using Windows update or Microsoft Update you may receive error 80070643 0 x or 0 x 643 (23 Oct-09)
http://support.Microsoft.com/kb/976982=====================
Step #1 => foremost, note what version of .NET Framework is installed:
How to determine what version of the .NET Framework is installed and determine whether the service packs have been applied
http://support.Microsoft.com/kb/318785Step #2-online now see resolution method 2 in this related KB article: http://support.microsoft.com/kb/923100
After the the .NET Framework Cleanup tool, reinstall all the versions of the .NET Framework (but the ones you noted in #1 above) manually using the download links on the page, and then run Windows Update manually install security updates for same.
NB: If you remove the .NET Framework 3.5 (SP1) by using the tool, reinstall .NET Framework 3.5 will also install .net Framework 2.0 SP2 and 3.0 SP2. Then, Windows Update will offer .NET Framework 3.5 SP1.
IMPORTANT! =>, If you remove the .NET Framework 3.5 (SP1), reinstall your version of .NET Framework in the following order:
1. the .net framework 3.5, then...
2 .net framework 1.1, then...
3 .net framework 1.1 SP1NB: KB923100 makes reference to this page: http://blogs.msdn.com/astebner/archive/2006/05/30/611355.aspx. Please read ALL as well as the related http://blogs.msdn.com/astebner/pages/8904493.aspx before using the .NET Framework cleanup tool.
Step #3 => Check-in at Windows Update and install the critical updates of security offered.
~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Cannot update my computer (error 0x8024002D
Also Error 1706 Setup cannot find the required files
Hi Suxie,
Thanks for posting in the Microsoft community.
If I understand correctly that you are unable to update my computer with error 0x8024002D and also you receive error 1706 Setup cannot find the required files.
I suggest you to see the links and check.
Error message when you try to install updates on the Microsoft Update or Windows Update Web site: "0x8024002D".
http://support.Microsoft.com/kb/958041
I also suggest you to see link and check.
Solve common installation issues in Windows Update, Microsoft Update and Windows Server Update Services
http://support.Microsoft.com/kb/906602
Please follow these recommended steps, review the additional information provided and after back if you still experience the issue. I will be happy to provide you with additional options available that you can use to get this resolved.
-
Cannot update Windows XP Pro after the reinstallation of the Message, the website has encountered a problem and cannot display the page you are trying to view. The error number is 0x8024400A.
Should I turn off my Anti virus software is what could be stopping my updates? some sites would sugest that I use Kaspersky 2012, if that's the case, then why do all my other programs that are installed to date OK?
Hello
Check your level of service current pack...
- Hold down the Windows (between Ctrl and Alt) key and press Pause break
- Examine what is listed in the system: section
If there is no service pack designated first level you must download SP2 from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=28
.. .and then run the downloaded program to install SP2.
Once you have done this, or if you were already in service pack 1, 1a or 2, then install SP3 by downloading and running from...
http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=24
For both of the above, you can ignore the text that says it's for network installations and also ignore the text advising windows/microsoft update if a single update of a PC.
So try and get up-to-date with the Windows updates.
Tricky
-
Error: "Setup cannot copy the NTLDR file" installation of SP3
original title: try to day XP Professional SP2 to SP3, but a 'copy' error "Setup cannot copy the file NTLDR.
Try to XP Professional Service Pack 2 update for... SP3, with "The Wizard software update Installation" through "automatic Microsoft updates.
Everything is going very well until a "Copy error" window saying:
"Setup cannot copy the file ntldr.
It gives 3 options
1: "Retry" (does not work)
2nd: 'Cancel' ('do you want continue Setup without copying this file?' by clicking 'Yes' gives 'Warning', "" If you cancel copying this file Windows might not work correctly. "") "Are you sure?) and
3rd: "Browse..." So I just restart and... "The installer was interrupted..." Restore the previous configuration... "And here I am with sp3 refuses to read its own files!
Any suggestions?
Thank youPS. : Before installation I disable the Avast! Anti-virus service. No daemon or alcohol 120% installed.
No other problem except when I try to update to the latest ATI AGP adapter CCC (catalist control center) I got a "failed to install".Information on the machine:
Operating system: Windows XP Professional (5.1, Build 2600) Service Pack 2 (2600.xpsp_sp2_gdr.100216 - 1441)
Language: EnglishSystem manufacturer: Dell Computer Corporation
System model: OptiPlex gx270s
BIOS: Phoenix ROM BIOS MORE Version 1.10 A06
Processor: Intel (r) Pentium (r) 4 CPU 2.60 GHz (2 CPUs)
Memory: 1022MB RAM
FG 0, 015 M/b: Dell Computer Corp.
Chipset: Intel i865PE
NorthBridge: Intel i865PE
SouthBridge: 82801EB/ER (ICH5/ICH5R) LPC Interface Bridge Disk Controller: Intel Corporation 82801EB/ER (ICH5/ICH5R) EIDE
HARD drive: Maxtor 6E040L0
AGP: ATI Radeon HD 2400 SeriesYou can trust in the security of any computer used until you have formatted the hard drive & then did a clean install of Windows.
Note: The free version McAfee to test which is preinstalled on the computer is now permanently disabled .
Follow the instructions in this post of mine in another forum (to-the-letter & in order! ) to return the computer to a State safe & functional: http://aumha.net/viewtopic.php?f=62&t=44636
If you need additional assistance with the clean install, please start a new thread in this forum: http://answers.microsoft.com/en-us/windows/forum/windows_xp-system
Note: The computer must NOT be connected to the internet or local area network (i.e. other computers) in its current state. All your personal data (e.g., banking online & passwords credit card) must be considered at risk, if not already compromised.
Wish I had better news for you. Good luck!
PS: If you still think again your registry database must be cleaned, repaired, amplified, to the point, healed, twisted, fixed, enlarged, "swept" or optimized (it isn't), read http://aumha.net/viewtopic.php?t=28099 and draw your own conclusions. See also http://blogs.technet.com/markrussinovich/archive/2005/10/02/registry-junk-a-windows-fact-of-life.aspx
Maybe you are looking for
-
Lock Keychain Access with session and lock screen
Hi guys,. I work on a macbook (which belongs to my boss) and he asked me to give him the password for the session. So far, it is quite logical since it is a work computer and not mine itself. But like all mac users, I use iCloud for share my keychain
-
Officejet OfficeJet 5745: 5745 works do not with Yosemite
None of my HP printers work after upgrade to 10.10. It took time to get the new 5745 for print from iMac, but not recognized as airprint. Must he reboot every time. Spoke with Apple who told me that the printer has not been supported for airprint,
-
I don't have Microsoft Works 9, but the update so that it disappears from my notification of update. No idea how to clear it?
-
At any time to upgrade to Windows Vista
I am running Win Vista Home edition & the HD is a failure. I have a new HD to install, and I bought a new license of windows anytime upgrade to Win 7. The problem is that the Express Windows upgrade link in the Panel is no longer me links to a site w
-
I replaced a Netgear wireless router yesterday and my computer tells me that it does not recognize the printer. It says I need to reconfigure. I have no idea as to what it means. The deskjet series printer no is MY6958R3BN another is C8969A. It wa