service restart error 3

Similar Questions

• faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer

  Original thread: runn dll
  I get on this on my vista desktop
  Error loading \3\lxcgtime.dll
  the specified module could not trading

  and this on my computer vista laptop
  Windows Defender
  faild application to initialize: 0x800106ba. A problem caused this program service stop. to start the service, restart your computer. \

  and I would like to know how to play mkv video media Center (win 7 not vista)

  Hello

   
   
  Did you do changes on the computer before the show?
  
  Method 1:
  You can perform these steps manually to start the Windows defender and check:
  a. Click Start.
  b. in "Start Search", type services.msc and then right-clicking the name of "services" in the list of programs.
  c. Select "Run as Administrator".
  d. look for windows defender and right click and select start.
  
  Method 2:
  You can also view provided articles knowledge base and check:
  Error message when you run Windows Defender: «Error 0x800106ba»
  http://support.Microsoft.com/kb/931849
  Error message when you run a beta version of Windows Defender: "failed to initialize: 0x800106ba»
  http://support.Microsoft.com/kb/930522
   

• Windows could not start the print on local computer service. Error 1068: The dependency service or group could start.

  I can't add a printer.  I constantly receive the associated printer spooler error messages and specifically "Windows failed to start printing on local computer service. Error 1068: the dependency service or group could start. "I tried to restart, tried"FixIt"MicroSoft application... all to nothing does not.  Help?

  Thank you!

  It comes with Vista, upgrade install and activate Forum.

  http://social.answers.Microsoft.com/forums/en-us/vistahardware/threads

  They will help you with your printer issue in Vista Hardware and drivers Forum above.

  See you soon

  Mick Murphy - Microsoft partner

• the system configuration not saved during the last stop on the service console error

  Hello

  I m getting this msg of error on the service console

  the system configuration not saved during the last stop on the service console error

  but when I tried to run some commands s troubleshoot mode according to the vmware esxcfg-boot - b, esxcfg-boot - p I got an error message like

  bad interprator usr permission denied

  I guess you follow this KB: http://kb.vmware.com/kb/1002503

  But seems like you have file system errors.

  Try to restart your system in init 1

  Then use fsck command to check your ext3 file system (remember that the file systems are not in use and use the - f option).

  André

• Web service deployment error

  Hi all!

  I created a Web Service to a VI. This VI has two values of entries: a string and and Int8 and a single output: an array of values (1 x table 3) DBL. The inputs and outputs are well connected via the connector pane.

  For example, in the project > unchanged to build, I created WS, built with the advanced > use LabVIEW 8.x file layout option checked, in the dialog box settings WebService (RESTful). The problem appears when I try to deploy this WS. The following error is displayed:

  Error LabVIEW:  (Hex 0xFFFEF84D) LabVIEW Web Services: An error occurred when extracting the deployed Web service. Rebuild the Web service by selecting the "Use LabVIEW 8.x file layout" option in the Advanced tab of the web Service properties dialog.
  

  How can I solve this problem?

  Thank you!

  
  

• The specified service does not exist as an installed service. (Error code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  I tried to turn on my Windows Firewall because they all stopped working for some reason any

  & When I tried turning on setting recommended my tittes name appears. PLEAS HELP

  The specified service does not exist as an installed service. (Error Code: 0 x 80070424)

  The name of your what appears?

  Error 0 x 80070424   See: http://support.microsoft.com/kb/968002

• Sims3-message-cannot start the game 0x039e8474 service initialization error

  someone recently put the sims 3 on my computer it's a game hacked, it worked fine on his computer, but it is not functional on mine me repeat it, cannot start the game 0x039e8474 service initialization error

  [Original title: program compatibility Application Applications App Apps game games Legacy Crash crashes Hang hangs]

  Hello

  Probably that's due to the custom being contained in the game which is not compatible with your current version. It can also occur when your cache has not been cleared of a previous installation or game save and damaged.

  I suggest you follow the steps mentioned in this article about this.

  http://Forum.thesims3.com/JForum/posts/list/561267.page

  Note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  If the problem persists, you can post the question in the Sims3 community forums.

  http://www.thesims3.com/community
   
   
  Hope this information helps. Response with status so that we can help you.

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Many services giving error code 2

  Hello!

  At some point many of my Windows services in the list of local services turned to display "unable to read the Description of Windows services. Error code: 2 "- but these services are running, I can't see their descriptions more - which is very frustrating when you need to find something."

  My system also runs fine otherways, with minor hiccups

  • Not showing WEI score does not, despite the score IS in the XML files... old problem; have you tried a number of fixed, does not
  • Some program report impossible to uninstall when you try to manually uninstall it from the Control Panel, but the program uninstall running made the work

  Execution of SFC /verifyonly returns info, that no violation of integrity have been found.
  This could be a file permissions error, for example?

  Help on this would be most appreciated.

  OS: Windows 8 x 64 Pro END

  Example of registry: wuaus, which is the Windows Update service
  
  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv]
  "PreshutdownTimeout" = dword:036ee800
  'DisplayName"="@%systemroot%\\system32\\wuaueng.dll,-105 '.
  "ErrorControl" = DWORD: 00000001
  "ImagePath" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f, 00,------.
  74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00, 73,------.
  00,76,00,63,00,68,00, 6f, 00, 73, 00, 74, 00, 2nd, 00, 65, 00, 78, 00, 65, 00, 20, 00, 2d, 00,------.
  6 b, 20, 00, 00, 6F, 00, 65, 00, 74, 00, 73, 00, 76, 00, 63, 00, 73, 00, 00, 00
  "Start" = dword:00000003
  'Type' = dword:00000020
  'Description"="@%systemroot%\\system32\\wuaueng.dll,-106 '.
  "DependOnService" = hex (7): 72, 00, 70, 00, 63, 00, 73, 00, 73, 00, 00, 00, 00, 00
  "LocalSystem ObjectName"=""
  "ServiceSidType" = DWORD: 00000001
  "RequiredPrivileges" is hex (7): 53, 00, 65, 00, 41, 00, 75, 00 64 00, 69, 00, 74, 00, 50, 00, 72,------.
  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00,------.
  65,00,61,00,74,00,65,00,47,00, 6 c 00 6f 00, 62, 00, 61, 00, 6 c, 00, 50, 00, 72, 00, 69,--------.
  00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 43, 00, 72, 00, 65, 00,------.
  61,00,74,00,65,00,50,00,61,00,67,00,65,00,46,00,69,00, 6 C, 00, 65, 00, 50, 00, 72,------.
  00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65, 00, 54, 00, 63, 00,------.
  62,00,50,00,72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 53, 00, 65,.
  00,41,00,73,00,73,00,69,00,67,00, 6F, 00, 50, 00, 72, 00, 69, 00, 6 D, 00, 61, 00, 72, 00,------.
  79,00,54,00, 6f, 00, 6 b, 65, 00, 00, 6F, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c, 00, 65,.
  00,67,00,65,00,00,00,53,00,65,00,49,00, 6 d, 00, 70, 00, 65, 00, 72, 00, 73, 00, 6f, 00,------.
  6th, 00, 61, 00, 74, 00, 65, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c 00 65, 00, 67, 00, 65,.
  00,00,00,53,00,65,00,49,00, 6F, 00, 63, 00, 72, 00, 65, 00, 61, 00, 73, 00, 00, 51, 65, 00,------.
  75.00, 6f, 00, 74, 00, 61, 00, 50, 00, 72, 00, 69, 00, 76, 00, 69, 00, 6 c 00 65, 00, 67, 00, 65,.
  00,00,00,53,00,65,00,53,00,68,00,75,00,74,00,64,00, 6f, 77, 00, 00, 6F, 00, 50, 00,------.
  72,00,69,00,76,00,69,00 6 C 00, 65, 00, 67, 00, 65, 00, 00, 00, 00, 00
  "FailureActions" = hex: 80, 51, 01, 00, 00, 00, 00, 00, 00, 00, 00, 00, 03, 00, 00, 00, 14, 00, 00,------.
  00,01,00,00,00,60, EE, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv\Parameters]
  "ServiceDllUnloadOnStop" = DWORD: 00000001
  'ServiceMain '=' WUServiceMain. '
  "ServiceDll" = hex (2): 25, 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 d, 00, 72, 00, 6f, 00, 6f,
  00,74,00,25,00 5 C 00, 73, 00, 79, 00, 73, 00, 74, 00, 65, 00, 6 D, 00, 33, 00, 32, 00, 5 C, 00,------.
  77,00,75,00,61,00,75,00,65,00, 6F, 00, 67, 00, 2nd, 00, 64, 00, 6 c, 00, 6 c, 00, 00, 00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv\Security]
  "Security" = hex: 01, 00, 14, 80, 78, 00, 00, 00, 84, 00, 00, 00, 14, 00, 00, 00, 30, 00, 00, 00, 02,------.
  00, 1 c, 00, 01, 00, 00, 00, 02, 80, 14, 00, ff, 00, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 01, 00, 00,------.
  00,00,02,00,48,00,03,00,00,00,00,00,14,00, 9 d, 00, 02, 00, 01, 01, 00, 00, 00, 00, 00,------.
  05, 0, 00, 00, 00, 00, 00, 18, 00, ff, 01, 0f, 00, 01, 02, 00, 00, 00, 00, 00, 05, 20, 00, 00, 00,------.
  20,02,00,00,00,00,14,00, ff, 01, 0f, 00, 01, 01, 00, 00, 00, 00, 00, 05, 12, 00, 00, 00, 01,
  01,00,00,00,00,00,05,12,00,00,00,01,01,00,00,00,00,00,05,12,00,00,00

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv\TriggerInfo]

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv\TriggerInfo\0]
  'Type' = dword:00000005
  'Action' = DWORD: 00000001
  "Guid" = hex: e6, ca, 9f, 65, db, 5 b, a9, 4 d, b1, ff, ca, 2 a, 17, 8 d, 46, e0

  [HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\wuauserv\TriggerInfo\1]
  'Type' = dword:00000005
  'Action' = DWORD: 00000001
  "Guid" = hex: c8, fb, 46, 54, 89, f0, 4 c, 46, b1, fd, 59, d1, b6, c 2, 3B, 50

  I had this same problem. I was using the cleanup for the AMD driver utility to remove the software from 13.1 catalyst before installing 13.3.  A brief investigation turned up a few threads on other forums of discussion with other people having the same problems. I don't know for certain that this is what caused your problem because you didn't say anything about software from AMD, but it was my root cause.

  To solve the problem, I just used the system recovery tool to restore my system to a point before, I had used the utility. Then to remove the drivers, I used the instructions here: http://support.amd.com/us/kbarticles/Pages/GPU57RemoveOldGraphicsDrivers.aspx. This removed the driver doesn't have the harmful effects of the AMD removal tool. I now use the catalyst 13.5 without any problem. If you don't have a good system point available, you may need to reinstall the operating system of restoration.

  Reference:

  http://forums.Guru3D.com/showthread.php?t=373855

  http://forums.Guru3D.com/showthread.php?t=373750

  http://Forum.NotebookReview.com/Alienware-M18x/710632-AMD-uninstall-utility-messed-up-Windows-8-a.html

• The VMware Workstation Server service stopped with service specific error %-1.

  Hi, when I try to enable sharing in Workstation 8 GTR | Change | Preferences | Sharing virtual machines, I get an error Impossible to configure the workstation server. Check the event log, I found they were trying to start the VMware Workstation Server service that does not start (even when you try to start it manually) and the following error is recorded "the VMware Workstation Server service stopped with service specific error %-1." by the Service Control Manager. I found no additional cases related.

  Running on Windows 7 SP1 x 64. The port is set to 7443.

  I also tried to find a newspaper there instead of vmware, but neither found anything related; However I could have missed something.

  Thanks for all the ideas, what could be wrong and how to fix it.

  Hello

  I have Workstation 8.0.1 installed on two laptop computers each running Windows 7 SP1 x 64... the shared component of the virtual machine runs on one but not the other. On the machine that I have problems with I uninstalled Workstation and reinstalled - without success. What I ended up doing to replace the datastores.xml file in the Directory go (C:\Documents and Settings\All Users\Application Data\VMware\hostd) on the laptop with the problem with the file datastores.xml of the laptop that works - success! I knew that there was a problem with the file because I've been poking around and noticed that the datastores.xml file is not open for editing - it was corrupted.

  I have attached the file to this message.

  Change of the section at the location that you store your shared VM (be sure to not use a UNC, which breaks the service as well!).

  I hope this helps.

  Steve

• VC view all Perrformance - STATS report service internal error

  I just installed a fresh copy of VC 2.5update 4. I use a database remote 10g as repository who seems to work very well, but when I open the performance overview tab I see the following messages:

  The STATISTICS report service internal error

  Messsage: The STATs report application initialization is not completed successfully.

  I've read several announcement about similar questions, but these solutions did not resolve my problem.  An excerpt from my STATS.log:

  com.vmware.vim.stats.webui.startup.VcDataSourceInitializer: could not open the VC DataSource. Details: Unable to load the "oracle.jdbc.driver.OracleDriver" JDBC driver class

  org.apache.tomcat.dbcp.dbcp.SQLNestedException: could not load the "oracle.jdbc.driver.OracleDriver" JDBC driver class

  at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1136)

  at org.apache.tomcat.dbcp.dbcp.BasicDataSource.getConnection(BasicDataSource.java:880)

  at com.vmware.vim.stats.webui.startup.VcDataSourceInitializer.openVcDataSource (unknown Source)

  to com.vmware.vim.stats.webui.startup.VcDataSourceInitializer.access$ 000 (unknown Source)

  to com.vmware.vim.stats.webui.startup.VcDataSourceInitializer$ 1.run (unknown Source)

  Caused by: java.lang.ClassNotFoundException: oracle.jdbc.driver.OracleDriver

  at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1386)

  at org.apache.catalina.loader.WebappClassLoader.loadClass(WebappClassLoader.java:1232)

  at java.lang.ClassLoader.loadClassInternal (unknown Source)

  at java.lang.Class.forName0 (Native Method)

  at java.lang.Class.forName (unknown Source)

  at org.apache.tomcat.dbcp.dbcp.BasicDataSource.createDataSource(BasicDataSource.java:1130)

  ... 4 more

  com.vmware.vim.stats.webui.action.ViClientRequestAction: request: http://167.155.23.129:8086/statsreport/vicr.do ? & moref = VirtualMachine:vm - 95 & sessionId = 5EB6187F-7AF3 - 4 c 06-9483-FFA3C5D58B4C & local = en_US & serviceUrl = https://Gen-vcenter-1/SDK

  org.apache.struts.util.PropertyMessageResources: com/vmware/vim/stats/webui/ApplicationResources_en_US.properties resource not found.

  org.apache.struts.util.PropertyMessageResources: com/vmware/vim/stats/webui/ApplicationResources_en.properties resource not found.

  com.vmware.vim.stats.webui.action.ViClientRequestAction: request: http://167.155.23.129:8086/statsreport/vicr.do ? & moref = HostSystem:host - 82 & sessionId = 5EB6187F-7AF3 - 4 c 06-9483-FFA3C5D58B4C & local = en_US & serviceUrl = https://Gen-vcenter-1/SDK

  Any thoughts would be greatly appreciated...

  Thank you

  You have to see this KB?

  http://KB.VMware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalID=1008328

  André

  * If you found this device or any other answer useful please consider awarding points for correct or helpful answers

• The secure web service call error.

  Hello
  
  I try to access a web service secured through a simple BPEL process in SOA Suite 11 g. When I test it through the company Manager, I get the following error. Since this is a guarantee websecure I put the policy(oracle/wss_username_token_client_policy) WS in the external reference and also provided identifying information. If someone had a similar error or know the solution please let me know. Also, I'm not sure if its related to security, or is - the way I am calling the service.
  
  Error message:
  Error ID reference: 80014
  Lack of time may 22, 2011 12:54:45
  Anomaly of the non-recoverable system:
  javax.xml.ws.soap.SOAPFaultException: 99999: unknown Service
  
  Error message: {http://schemas.oracle.com/bpel/extension} remoteFault
  Error default/Mocking!1.0*soa_be35cb3e-5f05-49df-a696-a653d5703681/BPELProcess1/30017-BpInv0-BpSeq0.3-3 ID
  Lack of time may 22, 2011 12:54:46
  
  Anomaly of the non-recoverable system:
  < bpelFault > < faultType > 0 < / faultType > < remoteFault xmlns = "http://schemas.oracle.com/bpel/extension" > < a name = "summary" part > < summary > 99999: unknown Service < / summary > < / part > < part name = "detail" > < details > & lt; con xmlns:Con: fault = "http://www.bea.com/wli/sb/context" > & lt; Con: errorCode > 99999 & lt; / con: error code > & lt; Con: reason > unknown Service & lt; / con: reason > & lt; Con: location > & lt; Con: node > PipelinePairNode1 & lt; / con: node > & lt; Con: pipeline > PipelinePairNode1_request & lt; / con: pipeline > & lt; Con: Stadium > stage1 & lt; / con: Stadium > & lt; / con: location > & lt; / con: fault > < / detail > < / part > < part name = "code" > < SOAP: server code > < / code > < / piece > < / remoteFault > < / bpelFault >

  This occurs if you have several (different webservices) WSDL imported into your project and they share common artifacts(XSD's). In this case, what you do, it's just that you separated from xsd to wsdl and deleted conflicts. This approach is suggested when you do not have control on WSDL that may be provided by different team and they all share common XSD.

  Thank you
  Smail
  http://soadiscovery.blogspot.com

• Receive vc system tray restart error message. How can I stop this on my laptop?

  Hello

  Get VCSystem plateau is restarting error message. How can I stop this on my laptop? My laptop model number is

  VPCEB4AFX.

  Hi nagk98,

  I'm sorry to hear that you are having problems with your laptop. The plateau of VCSystem is a process used by the VAIO Care program. To solve this problem is that you need to upgrade your VAIO Care program. You can uninstall and re install the program if VAIO update fails. You can check this link for more information on the VAIO update utility. I hope this helps.

  Thank you!

  Sean

  If my post answered your question, please mark it as "accept as a Solution.

• A service specific error: 2

  Hello
  
  I'm trying to configure the database for the first control and I get this
  
  C:\ > emctl start dbconsole
  ORACLE_SID environment variable not defined. Please
  
  C:\ > SET ORACLE_SID = ocp11g
  
  C:\ > emctl start dbconsole
  Oracle Enterprise Manager 11g Database Control is
  Copyright (c) 1996, 2007 Oracle Corporation. All the r
  https://Ronaldlee-PC:5500 / console/em/aboutApplicati
  From Con database Oracle Enterprise Manager 11 g
  P11G support is turned on...
  The OracleDBConsoleocp11g service would not star
  
  A service specific error: 2.
  
  More help is available by typing NET HELPMSG 3547.
  
  I tried to go through a work around where they recommend rename Ronaldlee/db_1-pc_ocp11g and oc4j/j2ee/OC4j_DBConsole_Ronaldlee-pc_ocp11g.
  
  When I try to start the OracleDBConsoleocp11g I get an error which is the same as above.
  
  If someone could help me?
  
  My oracle 11g database is installed on Vista.
  
  Thank you
  
  Rlee

  PL specify what version of Vista. Oracle is only supported to run on Business, Enterprise, and Ultimate Editions

  http://download.Oracle.com/docs/CD/B28359_01/install.111/b32006/reqs.htm#CHDJJHJG

  HTH
  Srini

• Printer Spooler service will not restart error 1068

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  I have XP and I cannot get my printer spooler service to restart, get error 1068, is there something I can do

  This error is probably due to the fact that you had (have) a Lexmark (or Dell Lexmark brand) printer installed.  Some Lexmark printers install a service and make the print service spooler depend on the Lexmark service.  So, if something happens to the Lexmark service, the print spooler cannot start.

  The first thing to do is to ensure that the print spooler dependencies are correct.  Open a command prompt window (start > run > cmd > OK) and type the following line and press ENTER.  Note that there is no space before the = but there is a space after it.

  dependent on the spooler of sc config = RPCSS

  Now clean the printing system: However before cleaning things up, on general principles, you can download, install, update and run full scans with each of these two free programs:

  AntiMailware MalwareBytes
  SUPERAntiSpyware

  Do not operate the two scans simultaneously.  Each will take a long time, so start it and then go do something else for a while.

  Cleaning of printers

  A. Clean on print jobs pending

  • Open a command prompt window (start > run > cmd > OK)
  • Type the following in the black command prompt window, and then press ENTER after each line

  net stop spooler
  del/q '% windir%\system32\spool\PRINTERS\*.* '.
  net start spooler
  output

  B. clean the old printer drivers and install the latest drivers by using the directions in One Article.  Do not omit step 4.