Service & widow errors updating issues

Similar Questions

• I can not install the Service Pack 1 update to my 64 bit Vista system. Get the 66A error code

  I tried several times to install the service pack 1 update on my Vista 64 bit system. It is always fails and gives me the error 66 has code. When I click on using this code I get nothing.

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack update Vista Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to

  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.

  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  I did a clean install of Windows XP Pro: Service Pack 1; Update will be not updated: 0x8024400A error

  Pass on several machines, cannot not run fix - it because I don't have the right to service pack cannot update the service pack because I can't update because of the 0x8024400A error

  About to panic. Could use some real help on this and not only refers to
  http://support.Microsoft.com/kb/836941

  The computer is a Dell Optiplex GX280

  What I installed is the chipset & drivers for the controller of the motherboard & ethernet.
  Internet works fine on the device, I am writing to you from him.

  Also, tried installing IE8 on one computer and run windows update, same error.

  Relax and breathe.

  FIRST: Uninstall IE8 and IE7 if they are installed.  Back to all the way back to IE6.  You want other patches before you get those.  Reboot after doing this.

  You are not the first to ask questions about how to upgrade a clean Windows XP - not even installation in the last week. In fact, I will just cut and paste my answer here... here:

  Get SP2 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Get SP3 (manually) and save it to your desktop. (There's a link here.) [You are a COMPUTER professional for now.]

  Install it.

  Then restart at least a couple of times for a few minutes between each restart.

  Download at least Internet Explorer 7 (if it is not Internet Explorer 8).

  Install it.

  Reset.

  Now, try to get the updates through the normal web page (http://windowsupdate.microsoft.com/) and see how much more you can get (100 +) and keep checking until you no longer have.

  Back - let everyone know if it worked for you.

• Service Pack 3 update fails error file ntkrnlpa.exe is open or in use by another program

  Original title: Service Pack 3 update fails

  I'm trying to update windows xp with service pack 3. I have download the update. When I try to install, the update fails with an error message"
  "File ntkrnlpa.exe is open or in use by another program", when no programs are running... Why?, he said.

  My stops to update SP3 and I cannot resolve the error message, how can I fix it?

  Hello
  Try the methods provided below and check if the problem persists.
  Method 1:
  This problem may occur if some third party software interferes with the installation of Windows XP SP3.
  Click on the link provided below for more information on how to set up your computer in a clean boot state.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353
  Note:
  How to configure Windows to use a Normal startup state
  After you have used the boot is a way to solve your problem, you can follow these steps to configure Windows XP to start normally.
  (a) click Start and then click Run.
  (b) type msconfig and click OK.
  The System Configuration Utility dialog box appears.
  (c) click on the general tab, click Normal Startup - load all services and device drivers and then click OK. When you are prompted, click on restart to restart the computer.
   
  Method 2:
  
  Download the update manually, and then install it.
   
  Windows XP Service Pack 3 network installation Package for IT professionals and developers
  
  http://www.Microsoft.com/download/en/details.aspx?ID=24
  See also:
   
  Steps to take before you install Windows XP Service Pack 3
  http://support.Microsoft.com/kb/950717
   

• Error updating service runs is not impossible to install Windows update

  Original title: Windows Update

  Windows Update may not work because the update service is not running.

  There is no error message for this error number.

  Hello

  1 did you last modified the software on your computer?

  2. do you get the message that Windows update service does not work?

  3 have you tried to start the service?

  Method 1:

  I suggest you to view update history to see which update are not installed.

  (a) open Windows Update by clicking Start , all programs, and then Windows Update.

  (b) in the left pane, click view update history.

  c c)) to display more information about an update, double-click it.

  Once you know Update KB number then visit the Microsoft Download and put the number in the search box, download and install the update manually.

  Method 2:

  I also suggest you go through the steps and also run the FIXIT automated from the link below.

  Problems with installing updates

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-installing-updates

  Method 3:

  If the methods do not help, I would say that you follow the steps mentioned below and try to start the Windows update services.

  Check if the following services are running.

  Background Intelligent Transfer Service

  Cryptographic services

  Windows Update

  a. Click Start, type "services.msc" (without the quotes) and press enter.

  b. double-click the service name in the list of Services.

  c. under the general tab, next to Startup type, make sure that Automatic is selected.

  d. If the service is not already running, under Service status, click Startand then click OK.

  e. install the updates and check.

  Hope this information was useful and keep us informed.

• Cannot install Service Pack 2 update on my Vista 32 bit computer. (error 0x800f0818)

  original title: cannot install Service Pack 2 update on my Vista 32 bit computer

  Through the windows update install Service Pack 2 and keep getting error 0x800f0818.  Have run fixit and the tool of analysis, but always in error.  Looked this error but can't find anything about it.  How can I fix it?

  I think that what PA bear is coming in the post previous is that service pack will contain Vietnamese Windows updates necessary for their release.

  A little/sorta...

  KB2555917, KB2507938, and al. (which dates from July 12, 2011 & before) would have been the last installed if updates Vista SP2 is not installed yet.

• Impossible to solve the problem of Windows Vista Service Pack 2 update! (error code 80073712)

  original title: could not resolve the problem of Windows Vista Service Pack 2 update!

  Hey there,

  I got Windows Vista Home Premium Service Pack 1 in my laptop when I bought it. Recently there was no updates of security (e.g., KB2481109) to install it into my system with a error: 80073712 and I had received a notification from windows to install Windows Vista Service Pack 2update. I tried to install it from windows update, but I got the error: 8024200d. I read the solution on this site and followed by download the stand-alone file and install "System Update Readiness Tool" (KB947821). ". After that I downloaded the standalone version "Windows Vista Service Pack 2" (KB948465) and tried to install it, but I got the error: 800f081f. "» I did Scan SFC which there is "no question of integrity" in the system, uninstalled "Avira Antivirus software" and again tried to install Service Pack 2 , but again, I've got the error: 80073712 After all this I couldn't solve the problem. Please provide some tips if anyone has solved the same or has a solution!

  Thank you very much

  UD

  Hi Electrocuteud,

  You have access to a Windows Vista installation disc? If so, follow the steps in this document to perform an InPlace upgrade. This will reinstall Vista without making any changes to the files and programs on the computer. Even if your data and programs must be safe, it is always advisable to make sure that you have a recent backup before major changes on the computer.

• Update Windows problem with the Bits Service and error 0 x 80070057

  The service status: problem with the Bits Service

  Error 0 x 80070057

  Original title: Windows Update problems

  Hi Dexter,

  Can I know the KB # the update fails?

  What is the question pertaining to a specific or all update updates?

  What antivirus software you use on your computer?

  To resolve this problem, see the following article:

  Difficulty errors Windows Update corruption as 0 x 80070002 and 0 x 80070057

  Hope the helps of information. Get back to us with more information to help.

• Persistent unsuccessful Windows Vista Service Pack 2 update. Help!

  Hello! My computer says that I have an important update-Windows Vista Service Pack 2 for x 64 systems. I get through the process to accept the license agreement and it starts the update. However, it ends and indicates ERROR update failed. Code 80070026-26. Any suggestions as to what I can do to have a successful update?

  Hi alm1219,

  1. do you have security software installed on the computer?

  2 are you able to install some other updates on the computer?

  3. did you of recent changes on the computer?

  See the below Microsoft article and try the steps mentioned, check if it helps.

  How to troubleshoot Windows Vista and Windows Server 2008 service pack installation issues

  http://support.Microsoft.com/kb/947366

• Photoshop CS5 update (cannot install 12.0.4 - error: update does not apply)

  Hello - I am new to this forum, so please forgive me if my question is somehow out of line.  I need to update Adobe Photoshop CS5.  Bought for the use of the company in 2011 (purchased in DVD format).  I recently installed on a new computer (iMac El Captain 10.11.1 running).  I downloaded Adobe Photoshop 12.0.4 updated for Adobe Photoshop CS5, but when I run it, I get error "update is not applicable."  Impossible to contact customer service - seems the forums are my only hope.   Thank you.

  Hi Serottacsi,

  Creative suite Adobe CS 5 is a very old software and the operating system you are using is the most recent, so there may be compatibility issues that adobe has not tested these applications on newer operating systems.

  However, you can try download & install the update for Adobe Photoshop CS 5 from the following link:

  Adobe - Photoshop: For Macintosh

• Massage of error: Update XML file Malformed 200.

  After downloading fire 3.4.16, I received a massage of error: Update XML File malformed 200.
  I can only do this issue using Windows Internet Explorer.
  So my logic says it's software from Firefox and not my machine. But what?
  Yours sincerely
  Derek

  There are a few possible causes of this error, see https://support.mozilla.com/kb/AUS+Update+XML+File+Malformed+200

• Hotfix for SQL Server 2005 Service Pack 3 update

  I tried to get the fix for SQL Server 2005 Service Pack 3 update. I downloaded it, but there is an error that appears. (WindowsUpdate_0000737D""WindowsUpdate_dt000"). I have went threw this Help window to fix this. When I get to step 5 there are two choices. 1 is engine mssmlbiz:Database. 2 is SQLEXPRESS:Database Engine. I choose both of them. one at a time and then I get to step 7 and this is where I hit a wall. I do not have an opption for the next button. Thank you.

  Try posting in the SQL Server Setup & Upgrade forum for assistance: http://social.msdn.microsoft.com/forums/en-US/sqlsetupandupgrade/threads/ ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• Windows XP Professional starts in safe mode after the service pack 2 update

  I have an older version of Windows XP version 1.0 on a computer in November 2001 of the gateway that I have updated all offers updates of material such as BIOS and motherboard.  Then to the service pack 2 update so I can load an antivirus software which does not load unless you have SP2 or later version.  It loads like a champ and restarts, but Windows does not start normally, I have to start in safe mode and remove SP2.  Is there a driver error that I need to find?  Or is there an other update I need before SP2 for such an old version of windows? (He also did the same thing with SP3).  Help!  I tried to reload Windows with the repair feature, but was lost when he gave me a prompt C:\.

  Hello Doug12345,

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to Windows XP and would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en/categories/

  Thank you

  Input jack
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• UAC trouble after Service Pack 1 update (Win7)

  Hello

  Anyone have problems with UAC on Windows 7 after a Service Pack 1 update?

  After the installation of the Service Pack (in fact after installing a hotfix for KB2442962 but the Service Pack install this fix themselves),

  programs (e.g. install a programm), requiring a user access control stop after I entered the password for the administrator.

  Other things work until they need an administrative account and password. I can only disconnect and then sometimes, I get the error message (translated from German): "too many 16-bit-program files are in use. "16-bit-programs close or increase the value of 'files =' in config.sys. Is that everyone, who have this problem?

  Someone knows how to fix this?

  Hello

  OK I got it =) it's a Lenovo VeriFace software, which is not compatible with the UAC patch. After you have uninstalled VeriFace, there is no problem with installing software as a normal user =)

  If Lenovo have to fix bugs in VeriFace and spread of new software fixed!

• Vista Service Pack 1 update fails - computer will not start and cannot be repaired

  The computer which is an Acer desktop computer, running Windows Vista Premium.  In the last 6 months updated Vista tried Service Pack 1 update to install Vista about 8 times and failed every time a reason any.  Just before this latest incident, a facility was "cancelled" in the Middle for some reason any.  I restarted the computer and almost immediately was advised that there is an update, which turned out be SP-1.

  I started the update, and some time later I received a message that the update was successful, and that he had to be restarted the computer.  I clicked on the button restart and the Installation continues during the shutdown.

  When the computer tried to restart initialization failed and I ended up after several lines of information that looked as if it might be checking drivers and then information began to look as if she might be reading the register lines.  Each line has 2 numbers separated by a slash (/), who scored on a single line at the top of the screen, (white letters on black background) after a certain time the count to stop with the line of text of flickering on the same entry.

  It is the line that goes to the screen when the information keeps changing.

  !! 0xc01a001d!  37636/92292 (\Registry\Machine\components\winners\x86...)

  Since the failure of the Windows Vista SP1 update, when the system begins to start, after a short while, he starts playing what seems like lines in the registry, and after a few moments he always stops with the same accurate information just flicker.  At this point, it seems that this scenario will continue forever.  The hard drive is accessible, as if trying to read something, over and above.  The hard drive light flashes, instead of being on regularly, but only for a while.  After that, even the flickering stops.

  I have tried to start mode without failure, then after loading some files and after some time (5 or 10 seconds) the displayed files always end with the same file at the bottom of the list and what seems to be a status extend the message please know...  Shortly after the screen is empty, the fails to start and the computer is restarted.

  Usually what will happen is that the computer will begin to start up again, but because the previous boot failed, it asks if you want to go to startup repair, which, at first, seems to work fine, but after a little time it brings up a dialog box asking if you want to restore to the previous good Restore Point.  The display will then return to the same routine he had previously, and she runs to always if not interrupted.

  If you click the Cancel button, a message appears indicating that you cannot interrupt the current process, so the only way that you can try something else is to Shut Off the Power in now the switch down, permanently.

  [Note: the notes above have not all accurate messages, Word for Word, exceot for the Hex error line.]

  Hello
   
  Thanks for posting on Microsoft Answers.
   
  Try to put the folder windows update catalog distribution and software
  Try the following steps:
  1. Insert the Windows Vista installation disk into the disk drive and restart the computer.
  2. When you are prompted to restart from the disc, press any key.
  3. When you are prompted, configure the language to install, time and currency format and keyboard or options for method of entry that you want, and then click Next.
  4. on the page to install Windows, click on repair your computer.
  5. on the System Recovery Options, click the version of the Windows Vista operating system that you want to repair, and then click Next
  6. in the System Recovery Options page, click command prompt.
  7. type cd C:\windows\winsxs, and then press ENTER.
  8 type ren pending.xml pending.old, and then press ENTER.
  9. in the registry editor, find and delete the following registry subkey:
  HLKM\Offline Components\AdvancedInstallersNeedResolving
  HKLM\Offline Components\PendingXmlIdentifier
  HKLM\Offline Components\NextQueueEntryIndex
  10. at the command prompt, type exit to quit the registry editor. Press ENTER.
  11. click on restart
   
  More information:
  The update is not installed successfully, you receive a message, and the computer restarts when you try to install an update in Windows Vista: http://support.microsoft.com/kb/949358
   
  Hope this helps
   
  Kind regards

  Niranjan
  Microsoft Answers Support Engineer

  
  Visit our Microsoft answers feedback Forum and let us know what you think.