Services microsoft Windows 7

Similar Questions

• The dynamic Cache Service Microsoft Windows is not resolved after you install the hotfix

  Installed hotfix http://www.microsoft.com/download/en/details.aspx?id=9258 on Win 2008 64 bit Enterprise edition.

  Dynamic Cache in good working Service Manager service. Changed the registry options, but showed no improvement in results.

  When copying or working with large documents (example: size 35 GB) Windows 2008 64 bit for Windows 2008 64 bit system memory shared network folder always go up as much as 9GB. But even when Windows 2003 32-bit system and data on Windows 2008 64 bit there is no problem.

  What are the possible ways to solve the problem of high memory consumption?

  Thank you
  Babu Nacka

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for Windows Server on Technet. Please post your question in the Technet forums. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en/category/WindowsServer/

• The Microsoft/Windows Update errors and updates failed.

  I just had to make YET ANOTHER Destructive full restore my win Vista PC, regular and continuous errors and problems caused by who knows what and the fact that the system restore never worked once in 10 years of friggin! My PC tries to run Win' Vista (SP2) and all the new updates that are applied after SP2. I also run Norton Internet Security (fully updated). I would like to re - install Office 2007 again once more, but I'm reluctant to until I get an answer to the following problem, because whenever I have re-installed Office 2007 I get Office update errors as well. I do not yet have enough away with this recovery to even think about re - install "other apps" again. My problem is that a heck of a lot more than several updates that were 'available' over time since I bought this pc (which didn't even have SP1 on it when I bought it new), do not have more than several times. Finally, it seems that these updates failed stop appearing as 'available '. Currently failed updates are: IMPORTANT: KB974468; KB2729449; KB2742595; RECOMMENDED: Windows Live Essentails 2001. OPTIONAL: Bing Office 1.3.1. also failed (the current version is 1.3.3...).

  My concern about all these multiple failed updates is that if these updates ARE important, whereas they should, and at the very least, not failed to install the first time which must be installed with success the next time. There are at least 40 + other these updates on my pc (of all types) who failed the first time, but succeeded (according to Windows Update), the second time. After doing a search and try to install these updates above manually from the Microsoft Download Center, I got a response that these updates "are not" or "are blocked by another condition on my computer. What 'State' is probably I wonder? Makes me think anyone or whatever decide an update IS important for a particular system is wrong either (and the update is NOT important at all) and so it does not yet appear in the list of "update available", or it IS important and there is another unknown or error "NO that does NOT exist. preventing the update to be applied. I say no because maybe this unknown error also cites a number of error that is not found by the completely useless online "windows help and support!

  If an update is NOT or is no LONGER available, then why hell is he always recommended! ??? In all cases, "Windows Live Essentials 2011" settles, and looking for 'help' by selecting "get help with this error" I am taken to the "windows help and support" line (which doesn't help at all). That's because this 'aid' shows only 26 'results' and NONE of them include error numbers (800706... and two instances of 66A) city. ANY help will be VERY much appreciated (epecially on the part of MVP, who have been a great help in the past) cordially Andy Bob :) :) :) :)

  Let's start from the beginning.

  Lets first see what happened with your drive.

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  change c:\bootex.log

   
  What is this file exist with something in it?
   
  The following commands query the event logs.
   
  To start verification by using the name of the source for any version of Windows (because it varies).
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Autocheck" or sourcename = 'Winlogon' or sourcename = "WinInit") get format:HForm

   
  To run chkdsk in Windows.
   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "Chkdsk") to / format: HForm

   
  For warnings about disk problems detected during normal operations and automatic repairs by Windows at the time where the problems were discovered.

   

  WMIC /append:"%userprofile%\desktop\DiskEvents.html" PATH Win32_NTLogEvent where (sourcename = "NTFS" or Sourcename = 'Disc') to / format: HForm

   
  Then to view the created file.
   

  Start "" "% userprofile%\desktop\DiskEvents.html"

   

  Copy and paste it here. Again run the commands again after doing the below.

  Then to test the equipment.

  Standard hardware troubleshooting
   
   
  First to test we can the material. Material defects can appear as many software defects, that's why we need to test the material first...

   

  Follow these steps in order. Defects of memory can cause disk corruption, disk failures can cause corruption of the disk. Damaged disc causes corrupted files (which SFC may be able to fix). If you get a stop error and after return. Do not run chkdsk with faulty memory.

   
  Diagnosis of memory

  If you have not run a diagnosis of memory, please do. Click on Start - Control Panel - choose Classic view in the left pane - choose Administrative Tools - then memory diagnostic tool.

   

  S.M.A.R.T
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  Disk in Windows drives monitor for impending failure. The function is called S.M.A.R.T. It detects an imminent failure, 30% of the time. In a type elevated command prompt (it's a single line)
   
  WMIC PATH MSStorageDriver_FailurePredictStatus /namespace:\\root\wmi get active, predictfailure, reason List

   

  If it is on will be true, otherwise on enable in the BIOS of the computer.

   

  Predict the failure must be False if everything is ok.

   

  In Vista and later if SMART failure predicted Windows prompts the user to run the backup.
   
  Run chkdsk

  In computer all your drives right click and choose Properties, then the Tools tab, and then click check now. Check the TWO boxes and then start. Reset. This will take from one day to the next.
   
  SFC
  Check the alteration of the file by clicking on Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   
  sfc/scannow
   
  Heat
  Heat can lead to problems of this kind, and sudden restarts without crashing. Make sure that your fans are not clogged with dust.
   
  For memory diagnostic results
  Click on Start - Control Panel (and select Classic view in the left pane), select Administrative Tools and then Event Viewer , and then look in the event (Local) - Applications and Services - Microsoft - Windows - MemoryDiagnostic-results Viewer entered.

   

  Look for EventID is 1201 or 1101 and Source is MemoryDiagnostic-results

   
  Double-click the entry for more details on this entry.
  
  For results of Chkdsk
   
  You can ignore this if you performed the first series of commands again.
   
  Click on Start - Control Panel (and select Classic view in the left pane) choose Administrative Tools and then Event Viewer , and then look at the Application and the System will connect (under Windows logs) for entries.

   

  Look for EventID is 7 and Source disk
  Look for EventID is 11 and the Source disk
  Look for EventID is 50 , and the Source is disk
  Look for EventID is 51 and Source disk
  Look for EventID is 52 and Source disk
  
  Look for EventID 55 and Source is NTFS
  Look for EventID is 130 and Source is NTFS
  Look for EventID is 134 and Source is NTFS
  Look for EventID is 137 and Source is NTFS
  Look for EventID 1001 and Source is Autochk
  Look for EventID 1001 and Source is Winlogon
  Look for EventID 1001 and Source is WinInit
  Look for EventID 1001 and Source is Chkdsk
  Look for EventID is 26212 and Source is Chkdsk
  Look for EventID 26213 and Source is Chkdsk
  
  Look for EventID 26214 and Source is Chkdsk
  Double-click the entry for more details on this entry.
   
  PS 7 and 55 are auto repair codes where windows repair disk errors silently on the fly. 52 is the SMART warning.
   
  If the results are transferred to the startup time events logs chkdsk, then the results are probably in the following file c:\Bootex.log. This file is removed when the results are placed in the event logs.
   
  For the results of the SFC
  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).
   

  findstr/c: "[SR] cannot" %windir%\logs\cbs\cbs.log|more "

   

  It will be able to see which files are corrupted.

   

  To see if there

   

  findstr/c: "[SR] repair" %windir%\logs\cbs\cbs.log|more

   

  There are often false positives for small text files that Windows uses like settings.ini and desktop.ini. Ignore these.

   

   

  You say that you have had continuous problems. But if you want to jump the gun to fire a bit.

   

  More details about the error

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and and the specific error code (for example, 80070002) in C:\Windows\Windowsupdate.log.

   

  Windows errors (smallish numbers) and COM HRESULT values (in general, but with exceptions, start with an 8 as 0 x 80040154) are defined in WinError.h, except 8007nnnn where you are looking for the error Window number it contains.

   

  As a general rule, Windows errors are less than 65 535 (0xFFFF). Errors from 0 x 80000001 are HResults Component Object Model (COM). Errors from 0 xC0000001 NTStatus results.

   

  NTStatus errors (usually, but not always to start with a C as 0xC0000022) are defined in NTStatus.h.

   

  the .h files are the best source because it includes the symbolic name of the error that can give clues such as the source of the error
  . FormatMessage does not have the symbolic name as the description.
   
  You get these files by downloading the kit of Development Platform (that's gigabytes)
  http://www.Microsoft.com/en-US/Download/details.aspx%3Fid%3D8279&SA=U&EI=w2IrULDDLsHFmAWbmIHoBg&ved=0CBwQFjAA&USG=AFQjCNHZn9-4f2NnuN9o3UWUsOF3wL7HBQ
   
  If you just want the two files I have them on my skydrive so I can reference anywhere I want.
  https://SkyDrive.live.com/redir?RESID=E2F0CE17A268A4FA! 121
   

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. To see Windows Update problems

  http://support.Microsoft.com/mats/windows_update/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

  Which helps with Windows Update.

  The system update tool

  Also run the system update readiness tool

  For 32-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=504

  For 64-bit Windows

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=1540

  To view the results click on start - all programs - accessories - right click on command prompt and choose Run as administrator. Type (or copy the below line and a line empty below and right click in the command prompt window and choose Paste).

  Notepad %SYSTEMROOT%\Logs\CBS\CheckSUR.log

  Repair and defragment the database

  Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type (or copy and paste by clicking in the command prompt window and choose Paste).

  Esentutl.exe /p c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

  Esentutl.exe /d c:\Windows\SoftwareDistribution\DataStore\DataStore.edb

   
   

  Each of the three towers of programs, services, and drivers in increasing amounts. So restrict the possible culprits.

  Clean boot

  Click Start - all programs - Accessories - run and type

   

  msconfig
  

   

  Then go to the Startup tab uncheck everything. Then go to the Services tab check hide all Microsoft Services and uncheck everything that is left.

   

  Reset. If this resolves your wake problem ½ of services / of startup items until you find that one.

  
  Tip clean boot

  If the above does not help.

  Download Autoruns http://technet.microsoft.com/en-us/sysinternals/bb963902.aspx

  Start the program by right-clicking and choosing run as administrator and click on the menu Options - Filter Options and check hide Microsoft entries and disable include the empty slots. Uncheck the box just to the left.

  Reset. If this resolves your wake problem half of the items until you find the one that.

  Safe mode

  If the above does not help. Windows Update does not work in safe mode.

  Use safe mode with Networking if you need internet access.

  Click Start - all programs - Accessories - run and type
   

  msconfig
  

   
  Go to the Startup tab, and then click Start secure (also check network if necessary). Reset. Come back here and uncheck the box secure start to return to normal mode.
   
  or
   
  If your computer has a single operating system installed, repeatedly press the F8 key as your computer restarts. You need to press F8 before the Windows logo appears. If the Windows logo appears, you need to try again. [Correction to start - Help and Support]
   
   

  Determine the Version of Windows Installer

  Windows Vista comes with version 4. Version 4.5 is available for download. To determine the version,

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type

  msiexec

  If you have Version 4.5 try reinstalling from

  http://www.Microsoft.com/en-AU/Download/details.aspx?ID=8483

  If you have Version 4 continue with the other steps below.

  Reregister Windows install

  That you re-register Windows Installer.

  Click Start - all programs - Accessories - right click on command prompt and choose run as administrator. Type

  
  regsvr32 c:\Windows\System32\msi.dll
  regsvr32 c:\Windows\System32\msihnd.dll
  regsvr32 c:\Windows\System32\msimtf.dll
  regsvr32 c:\Windows\System32\msisip.dll

  msiexec/reg
  

   

  FixIt

  Microsoft has a range of automatic programs to solve common problems. To see Windows Installer problems

  http://support.Microsoft.com/mats/Program_Install_and_Uninstall/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

   

  Reinstall the Services registry entries

  Download MsiServer_Vista_32.reg from https://skydrive.live.com/redir?resid=E2F0CE17A268A4FA 121

  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator. Type Regedit menu and file - import , import the MsiServer_Vista_32.reg.
   
  Reset
   
   

  Restart the Service and dependent services

   
  Click Start - All Programs - Accessories - right on command prompt and choose run as administrator.
   

  SC start DCOMLaunch

  SC start RpcSs

  Start msiserver sc config = request

  SC start msiserver

   
   
  .
  --

• I have to update my Microsoft Windows XP Service Pack 3 operating system.

  I have to update my Microsoft Windows XP Service Pack 3 operating system.

  However, in my services, I am unable to change my Automatic Updates service status to started.

  I get the error message - error 1058: the service cannot be started, either because it is disabled or because it has no enabled devices is associated to him.

  Hi, Bill.

  Follow the instructions here:

  Error 1058 "error message appears when a service stops unexpectedly

  http://support.Microsoft.com/kb/241584

• I am running Microsoft Windows XP Home edition Version 2002 Service pack 3, use the 32-bit or 64-bit upgrade to Windows 7 Home Premium?

  running Microsoft Windows XP Home edition Version 2002 Service pack 3, used the 32-bit or 64-bit Windows 7 Home Premium upgrade?

  I followed the instructions on the card that came with the software... indicating that, if I look at my computer it was telling me that my computer works... either 64 or 32, but it does not work.  So my question is, how do you know?

  You probably have the 32-bit version of XP (in most individuals, and if your system properties page does not have 64-bit, then you have 32-bit.)

  However, if you now have XP 32 - bit or 64-bit XP isn't the issue that relate to your decision to install 32-bit or 64-bit Windows 7.  This decision depends on the question to know if your hardware can support a 64-bit operating system.  In this regard, the main reason for users to install a 64-bit operating system is to allow the use of more than 4 GB of RAM.  If your hardware does support more than 4 GB of RAM, there is no interest to install the 64 bit version of Windows 7.

  You run the Windows 7 Upgrade Advisor?  With what results?

  Click Start > run and type msinfo32 in the "Open" box and click OK.
  After the system information window has had time fill, click Edit > select all, and then click Edit > copy.
  Paste (CTRL + V) into your next reply here.

• How can I get a CD of Microsoft Windows XP Home Edition Service Pack3

  Caused by a virus, some of the files on my computer were damaged.  I was asked to get the Microsoft Windows XP Home Edition Service Pack 3 CD, so that he can fix my computer to my computer technician.  I'm having a lot of trouble to find this CD.  Anyone know how I can get an or borrow one?

  Hello

  How to replace Microsoft software or hardware, order service packs and replace product manuals
  http://support.Microsoft.com/kb/326246

  See information on the replacement on this link.
  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/fb8230d4-000F-4ee7-b732-c9f8fff28bfd

  I hope this helps.

• You try to start a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a non-Microsoft service, contact the service provider

  Ideas:

  • You have problems with programs
  • ETrying to launch a service error "Windows failed to start the VMware authorization on local computer Service. For more information, see the system event log. If it is a Microsoft service, contact the service provider and refer to the specific service-6000004 error code "... I contacted the people at VMware they say it's a problem with Windows Vista..." IAM confused pls help... .rror messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Hi sanjeevkode,

  Thank you for visiting the website of Microsoft Windows Vista Community.  As the question you posted typically associated with third party software / application that has its own way of program codes and call the corresponding system resources when installing and running. Therefore, I also suggest you to join the VMware Forums for the best support.

  VMware communities: http://communities.vmware.com/home.jspa

  In the meantime I suggest you try these options / methods

  IMPORTANT NOTE: Microsoft provides this information as a convenience to you. Proposed changes could lead to serious problems. Microsoft cannot guarantee that problems would be solved as a result of the suggestions. Changes to settings are at your own risk.

  Option 1: If you go to computer management, and then to the list of Services and find the VMware authorization Service, it appears as stopped? If so, you need to start

  Option 2: Try logging on as an administrator Local host during installation first workstation, rather than you connect with a domain ID

  Option 3: The question can be caused also by your security program such an antivirus or a firewall of Windows /Defender that can have conflicting parameters as to not not to perform certain tasks. I suggest you temporary disable antivirus and firewall and check the result again. You must enable security programs new that had disabled you

  Option 4: The problem could be linked to a local or domain group policy. Make sure that the local account is defined as 'local user __vmware_user__' in the local Administrators group and the permissions of "Log on locally" and "Log on as a service.

  The two parameters are available in the "* Computer Configuration\Windows Settings\Security Settings\Local Policies\User Rights Assignment *" branch of domain group policy or local.

  Let me know if it worked.
  Hope it will be useful.

  Thank you and best regards,
  Vijay K - Microsoft Support
  Visit our Microsoft answers feedback Forum and let us know what you think.

  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• When I try to install the Rogers online protection, I get the message "microsoft windows service install is not accessible, or has failed."

  The Windows Installer

  I use vista ultimate and get problem with Rogers online protection. When I try to install, I get the message "microsoft windows service install is not accessible, or has failed." This happen if windows install is not properly installed. This problem prevents the installation of the Roagers online protection. "How can I solve the problem. I need help, people. I'm lost. Thanks in advance

  Hello

  Right-click and 'windowsxpkB942288-v3 - x 86 .exe' and then select 'Run as administrator'.

  All the best!

• Netscape browser to the Microsoft windows media services plug-ins to allow the download of license to play music

  Original title: music license

  How do we install m/soft media services plug ins to allow me to download the license to play music apparently my netscape browser doesn't have the plug in to allow the download

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  I am experiencing this when I try to use Windows Media Player (so recent, but not easy to find the version number) to play a .wma file that I've transferred from vinyl years ago.  My browser isn't FireFox, Netscape.

  I drag the file from Windows Explorer to the playlist in Windows Media Player, and a Web page comes up (http://drmlicense.one.microsoft.com/pdrm/en/welcome.asp?challenge=AAEAATMvJkIGMMWfrmgMxKUeJkQMlzddByxvhfASAwJeI7q50r * BSeNHGXSEmuEa3z9B8i4S!) NLoR3fRr8EAGEbyzSkliIt8lX1pln9bKWLchwWDg0iXnYGPf * BCH4kZ73R5EU2098fvdrcq72igPSRA3mL31! dWNESZJZBTemAFwX6cxUcEaSTAvCODqCFOL259Pw2vPgQ4QXcChw7R2QXrI0! lLE6Q7vFzgpqyDzWpWK2hfbfr5x3rA! Bebc75l2lX3gVmq5Na & DRMVer = 1. "& embedded = false).  The page says:

  -------------------------------------

  A license is required to play this file

  The file you are trying to play was ripped (copied) from an audio CD.

  During the extraction process, the file was "protected". This limits the number of computers on which the file can be read.

  To read the file on this computer, you must download a license (a process called "license migration"). A license is an electronic key that allows to "unlock" a protected file and read it.

  To download a license for this file, click download the license .

  [Button: download license]

  .. then by some Notes.

  -------------------------------------

  When I click on the button, I get a dialog box saying «Netscape browser no not the Microsoft windows media services plug-ins to allow the download of license to play music»

  .. who's actually a dead-end.  I tried the FireFox plug-ins, but it was a waste of time.

  It's annoying, because my vinyl transfer was fair use of album, and my time is precious to me.

  -Eric

  SOLUTION: Is annoying, but switch to Internet Explorer as default browser and go through the procedure described above.  When I did, he received the license, which enabled Windows Media Player play all .wma files in the directory.  (It could be worse - the software could have go me through the process for each file separately.) Other players are still unable to read the files and it's still a nuisance.

• Error: your Netscape browser is not "Microsoft® Windows Media Services" plug-ins

  I am running windows vista Home premium sp2 windows media player 11 and I'm playing my music from the old computer I had, that I saved on an external drive and I'll have this "error: your Netscape browser is not"Microsoft® Windows Media Services"plug-ins installed.»
  What could I do to fix it help please thanks in advance and GOD BLESS YOU ALL

  Hello

  1. what browser do you use?

  You can try to use Internet Explorer as the default browser and see if it helps.

  You can also check the following links of wire and see if it helps:

  Error: your Netscape browser is not "Microsoft® Windows Media Services" plugins installed.

  Netscape browser to the Microsoft windows media services plug-ins to allow the download of license to play music

  Hope this information is useful.

• Microsoft Windows hosting service has stopped working

  I use a 64 bit Windows Vista computer and the message "Windows host service Microsoft has stopped working."  I followed the instructions for previous messages to identify the problem through the event viewer, and it came with this code: start the application failing application svchost.exe_HPSLPSVC, version 6.0.6001.18000, time stamp 0 x 47919291, failed module hpslpsvc64.dll, version 100.0.170.0, time stamp 0x4712d157, exception code 0 x 40000015, offset error 0x000000000007f73e, 0x1dd0, process id 0x01cb6adf3e7f708a.  Does anyone have an idea of what application raises the problem and a possible solution to the problem?

  failed module hpslpsvc64.dll.

  Hello

  This looks like a driver of HP. So update your HP driver installation.

  André

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing

  Hello

  Try to re - install ZoneAlarm on laptop, BUT it tells me that I must upgrade to the Microsoft Windows Service Pack 1 (SP1) to do this... I am running Windows Vista and when I click on windows update it works for literally hours without anything happeneing.

  Zone Alarm has a key valid license - but for some strange reason, he will not have, so I had to uninstall and reinstall ZoneAlarm - he tells me that I need this update - who will not come?

  Note: Windows Firewall is turned on right now and when I look at 'exceptions' does not offer updates of windows as part of the selection list.

  Please, any advice on this will be greatly appreciated.

  Alan

  Windows Update Forum:

  It comes with Vista, upgrade install and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  You will receive the best help here.

  See you soon.

  Mick Murphy - Microsoft partner

• I have Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark... I'm looking for the answers to a few questions

  I am a student and I got Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark
  I have a few questions
  1 - can I install and activate it on my laptop and desktop at the same time?
  2-How many times can I activate it?

  I am a student and I got Microsoft Windows 7 Professional with Service Pack 1 64-bit (English) - DreamSpark
  I have a few questions
  1 - can I install and activate it on my laptop and desktop at the same time?

  No, 1 license, 1 computer.

  2-How many times can I activate it?

  You can reinstall and reactivate on the same machine as many times as you want. You may need to reactivate by phone after the 5th time.

• Get an error "event ID: 1515"; Event source: Microsoft-Windows-user profiles Service

  * Original title: Windows operating system; Version: 6.1.7600.16385; Event ID: 1515; Event source: Microsoft-Windows-user profiles Service

  I get this error message: Windows operating system; Version: 6.1.7600.16385; Event ID: 1515; Event source: Service with event ID 1511 Microsoft-Windows-user profiles. I tried to find a solution but have not been able to find something with this specific question. I am currently connected with a temp file but will lose any information when disconnected. I am the only user on this computer. Recently, I replaced my card motherboard and CPU and reactivated windows by phone. Thanks for any help.

  Yes, Mr President, I think that's how I got the profiles of other users in my registry. I knew that when I replaced my motherboard there is a chance that I have to reinstall my operating system. I was happy when I was not at, but after trying to correct the mistakes, I bit the bullit and reinstalled.

• Microsoft Windows Build 6001 Service Pack 1 on top of the center of my screen and the TEST MODE on four corners

  After a call to technical support to connect a new printer, I now Microsoft Windows Build 6001Service Pack 1 on the top of my screen. TEST MODE is in the four corners. Technical support HP said it was easy to remove, but would not tell me how without purchase. I have Windows Vista. Can someone please? Thank you

  Type msconfig in the search box and press on enter.

  Make sure that the Normal startup is selected on the general tab and Safe Boot is NOT selected in the Startup tab.