The dynamic Cache Service Microsoft Windows is not resolved after you install the hotfix

Similar Questions

• Windows does not restart after you install the new hard drive.

  Hi, I upgraded from 100 gig 250 gig drive hard nice clean installation, worked perfect. Turn off the laptop, turn back on and only bios are accessible, without window, just a black screen with a small white bar flashing at the top of the screen. Put old drive in, everything works fine and in disk management the new shows drive but are not accessible? Anyone got a clue?

  Now I found the answer to my problem. Acer Aspire9802 WKMI recovery allows only 32 GB max loading mbr, therefore partitioned readers with a free majorgeeks.com partitioner and ye he

  The free program, I called EASUS PARTITION MASTER, dead easy to use for a novice like me! and with an instruction book complete in pdf format

  every 4 years, 21 '' screen singin' and laptop dance - now considered to be old!

  I guess if the sata drive is the same sata version as controller on your laptop, that's to say sata 1 or 2 or 3
  And if a later version of the sata it's backward compatible?

  Use the utility disk provided by the manufacturer of the drive check

• Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  Why my virus program esetnod 32 guard tell me that my system is not updated after you install the update of all the nessary?

  I have download all necessary Windows 7 updates, but they are not installed. Can anyone help?

  Kind regards

  Mitch

  Hi Mitchell,

  Please uninstall and reinstall the ESET program and check if it solves the problem:

  Uninstall or change a program

  http://Windows.Microsoft.com/en-us/Windows7/uninstall-or-change-a-program

  For further assistance:

  ESET knowledge base

  http://KB.eset.com/esetkb/index?page=home&locale=en_US&option=None

  Please post us with the result.

• print DigitalPersona finger scanning does not work after you install the recommended updates

  My impression of digitalpersona finger scanning does not work after you install the updates recommended on my dell Vista

  Hello

  1. do you have an error message?
  2. are you referring to the print scan hardware or software scan print that was supplied with the device?

  Method 1:
  I suggest you to update the software DigitalPersona from the link below https://www.digitalpersona.com/support/downloads/

• Where can I download the dynamic Cache Service for Windows Server 2008 R2

  I found the helpful http://support.microsoft.com/kb/976618 note and want to d/l the dynamic Cache Service.

  Thank you

  Robert

  Hello

  Your question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the Forum on TechNet Support. You can follow the link to your question:

  http://social.technet.Microsoft.com/forums/en-us/winservergen/threads

• BootCamp Windows does not start after you have enabled disk encryption

  Hello everyone, I am in a desperate situation and I need your help. Here is my sitatuaion.

  I have 13-inch MacBook Pro (early 2011). I put an SSD inside as my main drive and I also put an extra drive (HDD) in the optibay instead of my drive superdrive. The structure, I had was this:

  (1) my entire SSD was my OS X disk.

  2 my HDD optibay had three partitions: partition backup Time Machine, a) b) Extra partition (for stuff like media), c) Windows partition with Windows 7 installed.

  Had that Setup for a long time and everything worked very well, my SSD has been saved on the Time Machine partition on the HARD drive in my optibay.

  Then, I decided to turn on the File Vault 2. First of all I did for the SSD with my OS X on it. Everything went well and I could always start my Windows 7. Then, I decided to encrypt my Time Machine backup (because what's the point to encrypt the main system disk if you do not encrypt the backup as well?) -Here too everything went well.

  In other words, until I needed to start Windows. I have restarted my Mac, hold down option, the picker contraption came, but there was no windows to the choice. I came once before (but), so I knew I could always start in it.

  I jumped into my USB thumbdrive with fairing on it, he chose and he gave my start on the Windows partition option. But this time it did not work, I got an error message saying my there is no bootable device or something like that.

  I have confidence in turning the things of encryption for the partition of Time Machine (which is on the same HDD as my Windows partition) screwed disc here.

  The only question is: can I fix, start Windows, without having to install it from scratch? What I want is to have encryption enabled for both drive my main SSD where I have my OS X installed AND the partition of Time Machine that is on the disk in the optibay HARD and also have a Windows partition on it, but still be able to start Windows.

  I am running 10.11.13 El Capitan.

  Can you help me somehow? Here is my list of cs diskutil:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 128,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh 127,2 disk0s2 GB SSD

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,1 disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage Time Machine 150.0 GB disk1s2

  3: disk1s3 Apple_Boot Boot OS X 134,2 MB

  4: Apple_HFS Extra 300.0 GB disk1s4

  5: Microsoft Windows 49.5 GB disk1s5 data base

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh SSD 2 GB + 126.8

  Logical volume on disk0s2

  406F3A62-89AE-4F91-BEEF-B8CE0B16C8EF

  Unlocked encrypted

  / dev/disk4 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Time Machine disk4 GB + 149.6

  Logical volume on disk1s2

  0567D276-3738-4776-9CC5-B69F922B0A0C

  Unlocked encrypted

  Your problem is not related to FileVault2. Your question should have begun when additional Apple_HFS was created. Please after the release of

  sudo fdisk/dev/disk1

  If you have a problem with your Mac, you can potentially lose the SSD and backup TM. It is not an optimal configuration. A TM must be physically separated from your Mac, so you can restore the TM backup to a new Mac, if necessary.

  Also, since you removed the optical drive, re - install Windows on your 2011 model is a very rough road to travel.

• My phone is lock and does not start after you install an update to Windows.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  Boots systems and load normally until the display of connection where instead of the login screen, I show the screen updated frozen on "Installing part 3/3 (0%) update." The laptop stays on this screen, with the cursor froze with a loading icon, for about half a minute until the screen shuts off and reboots the system, put the system in a loop, I can't on.

  I tried: turning off on and powered. using advanced boot options to open the system to all types of 'Safe Mode' and leaving the laptop for some time before trying to turn on the system again. All these things have not worked and the system remains in the lock down.

  I wonder if it is a common problem after the latest Vista updates or if it is more specific to my laptop. Whatever it is, any kind of feedback and advice would be most appreciated.

  Thank you.

  After you have installed the Windows Vista Home Premium on my laptop, I am unable to start my laptop properly.

  "part 3/3 (0%) update installation." ... and restart the system.

  See if this sugesstion can help you:- http://support.Microsoft.com/kb/949358 >

• My windows will not validate after you perform a clean installation.

  After a few reformat my windows won't validate

  Ive recently had to reformat my computer a couple of times due to hardware problems.  Now my windows will not activate even if im using the same computer, I first installed windows on.   Through the activation of said phone system that my windows are now no longer valid, but it is said in the lower right corner on my windows desktop is not genuine... Please let me know what to do... im getting very stressed out trying to figure this

  How to activate Vista "manually" (activate by phone)
  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) clearly explain your problem to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  J W Stuart: http://www.pagestart.com

• Re: Portege R500: controller button does not work after you install the update

  After you have installed the latest version of Toshiba Value added Package, the two buttons (toshiba assist, and backlight power) do not work properly: they open instead a window of Firefox.

  I guess there is something to configure in the section "Optimizing" Toshiba Assist.
  When I open the program "Toshiba buttons functions" (sorry for the puny, Spanish translation, it is called: "functions of Toshiba botones") all entries are empty and I have to enter the Url of the program supposed to turn off the backlight of the screen of my LCD...
  I have no idea where to find this executable.

  Can someone help me?

  Why you n t use the OS restore option?
  The operating system supports the option of system restore and this helps to put the system in the previous point.

  Check, maybe it helps to get the old version of the Toshiba Package Value added.

• Windows does not start after you use vaio recovery

  I tried to reset my computer to factory settings and programs. I used the for Vaio recovery tool do. During the course of my computer restarted as it should. But as Windows was returning back I get an error of "Windows Boot Manager" say a file called ntoskrnl.exe was missing or corrupt with status 0xc00000e9 upstairs he provided a way to fix: cannot start Windows. A recent hardware or software change might be the cause for the problem:

  1. Insert your windows installation DVD and restart.

  2. choose the language settings, click Next

  3. click on repair your computer

  After step 3, the repair tool said that it could not solve my problem.

  I tried to redo the recovery twice for nothing doesn't.

  I tried to use the memory diagnostics.

  I tried to change the default BIOS settings.

  I tried to use the chkdsk command in the console installation disc

  I don't have a backup disk.

  You could try System Restore option under the recovery tool if startup repair option has not resolved the problem. After the execution of the Image recovery system on your VAIO computer and you still have the same issue, then you may need the recovery disc. If you have any errors after the diagnostic equipment, then the recovery partition was damaged already.  You can buy the recovery disc for your computer of Sony parts and accessories or parts distributor authorized Sony.

  If my post answered your question, please click "accept as a Solution.

• The Explorer will not work after you install Office Jet 4500

  Hello

  Can someone tell me why my windows Explorer does not work after installation of my printer Office Jet 4500 wireless?  I am currently using windows vista.

  Thank you

  Go to a command prompt.

  Type sfc/scannow and allow to run the System File Checker. Restart your PC to see if Windows Explorer works.

• laptop does not start after you install a new hard drive

  HP G60-630us laptop... .replaced hard drive... .installed 3 boot disks... After you remove the last drive, when you click on continue it is supposed to start... .it reads no boot device... . If put you the first disc to start, you end up back where you started... I changed the boot order and put the hard drive first... even starts

  Hello

  That sound great for the hard drive.

  With regard to the problem you have with Windows activation, it's because your laptop is listed as originally came with Windows 7 Home Premium - as I mentioned in my guide for the creation of a sale installation disc at retail, the image that you use needs to be also be Home Premium - IE you cannot move to professional or ultimate edition as the key on your COA label will not work for a different version of Home Premium and there is no way around that.

  The image that should be used is on the following link.

  Windows 7 Home Premium 64-bit.

  You will need to create another disc of installation using the above Image and then use it to reinstall Windows 7 - the activation methods I described previously, then will work fine.

  Kind regards

  DP - K

• Application service Coldfusion 10 does not start after you restart windows 8, up

  I saw that CF10 installer now supports windows8, then I reinstalled my computer and installed coldfusion 10. After installing, everything works perfectly and smoothly CF. After restarting the computer, however, the application server service will not start. I reinstalled CF twice with the same results. Here is the error in the event viewer:

  "The 10 ColdFusion application server service stopped with the following special service error:

  The operation completed successfully. »

  whether the error in the popup you get when you try and start it:

  "Windows failed to start the server in Coldfusion 10 applications on Local computer. For more information, rreview system event log. If it is a non-Microsoft service, contact the service provider and mention the 0 service-specific error code. »

  Any help would be appreciated. I wouldn't have to reinstall completely to Win7.

  OK... Thanks Piyush!

  I looked at the file and he had:

  application. Home = C: / ColdFusion10/MenuEase

  I think it was located from when I deployed my win7 backup. I have had cases set in place and the project I was working on called MenuEase. I changed it to:

  application. Home = C: / ColdFusion10/cfusion and it works now!

  Thanks for all the help

• The Windows Installer appears when not claimed after you install the new printer.

  I installed a Canon S400 printer and now when I open a folder, file or no matter what shortcut (either by double clicking or right click Open) MSI is trying to install one of the two applications PDF I had already installed. After canceling the installation program, the file opens. How can I fix? I am running Windows XP SP2. Please do not say reinstall applications, I have uninstalled them because they proved to be useless junk.

  If you don't want to reinstall applications, then use the Windows Installer Cleanup utility to remove these entries.

  Clean Up MSI (Windows Installer) - http://support.microsoft.com/default.aspx?scid=kb;en-us;290301

  MS - MVP - Elephant Boy computers - don't panic!

• It does not start after you install windows 7 on an SSD without going into the bios and clicking on the reader.

  Will change the bios fix it?  If yes how?

  CharlesR salvation,

  This concern is usually caused by an incorrect configuration of the BIOS of your device settings. If you have recently installed Windows 7, then most likely the boot priority is always set to the optical drive or USB (depending on which you have used in the installation of Windows 7).

  The BIOS settings are dependent on the manufacturer of your device, this is why we invite you to contact the manufacturer of your device for assistance by changing its settings.

  Kind regards

  BIA of Hamilton

  You can use the mark as answer button, if this post responds to your request.