HP Officejet 4635: Reduced size printing

Similar Questions

• HP OfficeJet All In One 4635: HP officejet 4635 does not print

  Bought a new HP Officejet 4635 all-in-one today.  Installation is complete, do not print anything.  Run wireless on Windows 8.1.  The Test results wireless network print, says no problem found.  Unable to print from the internet, word or excel (from Office 365).  Already reinstalled printer twice.  I don't get an error message, the work appears in the queue but then disappears without printing anything.  I don't have Norton or MacAfee.  Help! I already spent all day fighting with it.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning.

  Download and run printing HP and doctor Scan quickly and automatically perform several tasks of troubleshooting.

  When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• E-all-in-one printer, HP Officejet 4635: is MORE printed desktop ONLY - HP Officejet 4635 e-all-in-one

  I've been living with this problem for a few months and now wants to solve with your help.

  Question:
  Printer wireless HP OfficeJet 4630 print is no longer with my desktop Dell D531 via WLAN, however, work
  with all the other WLAN connected devices, e.g. mobile phones, netbook, computer laptop and tablets.  I use FETD fine printer years and this issue just started a few months ago. To print, I have sent files to other devices and printed with same print files.

  What I did to solve the problem without success:

  (1) verified using two other forums which suggests the point 2 below;

  (2) Ran HP Print and doctor better analysis tool (latest version) that says software problem so I uninstalled the old software, rebooted each time, downloaded/installed new software each time and installed the new printer wireless which will not yet be printed of Dell D531 destop ONLY. Note: tool can print a diagnostic page 'Internal' but not test page;

  (3) range of HP printers reconnected to the couple times WLAN;
  (4) for desktop computer and printer properties show the same internet address;
  (4) tried to use tools of diagnosis or bad MS Fixit printer without success (does not matter);
  (5) have tried to use the dropdown to printer option troubleshooting without success;

  (6) read by this and other forums without help so far. and

  (7) the print spooler is empty and I cleaned 813 Printservice EventID 372 newspapers.

  System:
  Name of the operating system Microsoft Windows 7 Home Premium Service Pack 1 Build 7601 6.1.7601
  RAM 4 GB
  BIOS Version/Date Dell Inc. 1.0.13, 09/02/2009 (last)
  Name of NVIDIA GeForce 210 graphics card

  All reasonable advice are appreciated.

  Hello @bob3677,

  Thank you for the update.

  So should I understand that you assign an IP address manually and also assigned a TCP/IP port? Let me know.

  If fact, I would say that provide you for your printer administration permissions.

  • Press the 'Windows key' + 'r' for 'run' - Type 'coil' and press ok.
  • Right click on 'PRINTERS' - select 'properties '.
  • Select the security"" tab. You will find a few entries like the 'Administrators' and 'users', click on 'Edit' and give "Full permission" at all entrances. Save / apply settings.
  • Go to "Devices and printers", right-click on the printer you have installed and select "printer properties".
  • Select the security"" tab. You will find a few entries like the 'Administrators' and 'users', click on 'Edit' and give "Full permission" at all entrances. Save / apply settings.
  • Restart your computer and try again to print.

  Please let me know if that solves the problem, or if you need assistance.

  See you soon

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• OfficeJet 4635: assistant lost printer

  I lost my printer app Wizard and the icon when I upgraded to a new driver.  I followed other threads and deleted the software and reinstalled by instructions and not good.  I tried using the disk and go good.  The printer is connected wirelesslyand worked before the upgrade. It prints well and fine analysis of thre printer.  Please help me get back the printer assistantg.

  I finally he stares at me.  I uninstalled all the HP software again.  Then, I went into REGEDIT and deleted any reference to HP.  Then I ran a registry fix program (SYSTEM Mech. 15).  Turned the printer off, shut down the computer.  Restarted the computer and turned off my auditor of Virus (VIPRE).  The latest version of the full software from HP, printer, ranConnect new printer (wireless).  Finally, I went to the display DEVICES and PRINTERS and installed the NETWORK PRINTER.  The system has requested that I come home from the installation disc, so I did and ran the installer.  When it's over, I got a new selection in the minimal software that had been installed called ASSISTANT PRINTER.  I chose and SHAZAMM!  I have my printer wizard back.  WOW!

  Thank you RnRMusicMan for your reply, which came after I did the steps above.  I'm glad I don't have to clean boot and open a new user account.  Cleaning the registry by hand was a chore, but I think it's what brought me back in the game.  Thanks again.

  Hope this helps some of the others with this problem.

• HP OfficeJet 4635: Unable to print from JO 4635

  Today, out of the blue, the unit has stopped printing. The message "the i o operation was abandoned because either a thread exit" returns constantly to each application, I tried.  I've uninstalled and reinstalled the driver at least 3 times in the last hours. The same problem. I run HP printing and the doctor to analyze several times and each time I'm unable to print the TestPage. I didn't choose the "no print" and the internal test page was printed, but a warning indicates that there is some sort of problem with the driver.

  Any help with this? New ideas on how to fixit?

  Hi @Manuelpr56, thanks for joining the Forums of HP Support! I see that you are unable to print because of this applications error message ' the i o operation was abandoned because either a thread exit. I would be happy to direct you to the appropriate Department once I have more information. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos. Looks like you have a computer problem, I recommend you're talking the computer manufacturer for help. If you have an HP computer, please provide details.  What is your product number of your computer? Click on this link. Once they have addressed the error message and you are still having problems, please post back so that we can direct you to the right advice to help you.  Please reply to this message with the results. I can't wait to hear strings attached good luck!

• OfficeJet 4635: Portable wireless printer NEVER lose wireless connection, what gives?

  Why am I never lose my connection to wireless printer?  I entered the network number and the password more than 15 times now.  Ready to return this * #L! printer.  Fact the wizard game until at least 10 times.  What gives?  Saying: this is a wirelss printer is comedy, because it is not.  Drivers are updated, update software.  Occurs on multiple computers.  There, can someone help me and how HP can sell these things when EVERYONE seems to have this problem.

  This solution seems to have solved my problem.  I re-post if it happens again

• All-in-one HP Officejet 4635: my HP Officejet 4635 all-in-one printer does not print since upgrading to Mac 10.10.1.

  All-in-one HP Officejet 4635 does not print since upgrading to Mac 10.10.1. Any suggestions? Thank you!!!

  Hi brenHP4630,

  You might want to try updating the driver for your specific operating system. You can find the download HERE.

• HP Officejet 4635 - need assistance to change the custom print size

  I am trying to print a card - 3.5 "x 8.5" on my HP Officejet 4635 and can not find the place where to select a "custom size" in the paper/quality - advanced space.  Much choice is there, just not 3.5 x 8.5 "and nothing nearby in mm.

  Any ideas?

  Hello

  Size 3.5 x 8.5 inches is not supported by the device, custom paper size is not supported on Windows OS.

  You can give a try to the size of Japanese envelope Chou #4, which is the closest option to you to your needs, otherwise I'm afraid, is not a supported format.

  You can find paper Handaling specs below:

  http://support.HP.com/us-en/document/c03839855

  Shlomi

• OfficeJet 4635: printing avery 8160 labels - correct alignment

  Can anyone suggest where/how do I get help with printing labels Avery8160 on my Officejet 4635.  I tried to use Avery templates and other options on the site of Avery, Avery downloaded on Word 2010, using HP Photo Creations with labels Avery, tried to use models of success in the past on this printer, which I have not yet used for the labels.

  Everything seems perfect for the labels on the computer with all the editing screen and centered, but when we print the text is not aligned in the location of the label and not all three columns are centered.  I'm lucky if three or six labels on thirty are usable.  It's @# $% & frustrating.  I too lose paper, labels and ink, not to mention my time!  I also tried to use brochure mast as suggested in a post.  That did not help either...

  My last 3 in 1 HP printer does very well with the labels - they were child's play.

  Hi Trinkie.

  We retested printing of labels Avery 8160 with HP Photo Creations and two different printers Officejet and could not reproduce the problem of misalignment. (We used the default device and HP Photo Creations print settings panel.)

  To be clear, the options of scaling I mentioned above would be in the control panel of the printer itself, you can reach by clicking on the blue printer settings link on the HP Photo Creations print screen. (This link is between the printer and the paper size in my screenshot of menus.) I think that you have checked that. However, if you have not installed the long drivers for your printer, you will see fewer options. It's a possibility.

  It is a long shot, but engineers thought that it would be possible that you are using J8160 stock. It is a format of A4 paper and would produce out misaligned.

  Hope this helps,

  RocketLife

• HP Officejet 4635 e-all-in-one printer prints multi-page document

  Hello, I have a HP Officejet 4635 e-all-in-one printer and can't print a multiple page document. The printer will print all except the two or three first pages, stopping in the middle of the last page it is printing, and then ejected from the page, usually with the third print top. At this point, I get an error message on my computer screen that says: "cannot print from xxxxdocument. I can go back into the print menu and select the pages that are not print and manually fill the work, but which requires sometimes two or three attempts, that the printer stops again impression after two or three pages.

  My operating system is Windows 8, the printer is connected to my wireless router which is on the same floor, the printer is connected directly to the wall outlet. I met this problem until print 28.0 Firefox, Microsoft Word, and Microsoft Excel. The documents included diagrams, sheets of computing, graphics and text. Oddly enough, I think I'm able to print several pages (of least until 4 on my last attempt) of Microsoft Office Picture Manager.

  I have no page unique impression of difficulties from the browser or any installed program and am able to print from my devices android as well, although I still have to try multiple pages printing app. The problem seems to occur more often if I try to print more than two pages.

  I searched on the Web site, looked through the installation of printer troubleshooting, including the instructions under "step 3: If your printer is connected to your wireless router, but you can't print (or scan). Nothing I've tried has helped him.

  I wish I had a solution to this problem.

  Thank you very much.

  Helen Marie Kennedy

  Have you tried full install driver software?  OJ4630_188.exe

  Exit the: 08-04-2014

• OfficeJet 4635 - cannot print in Windows 8

  I installed the OfficeJet 4635 successfully on my Windows 7 and XP machines by using the wireless network.  I installed on my Windows 8 machine using the full features of hp.com driver, can see the printer but cannot print.  I ran the print and Scan Doctor whenever the error that the driver must be uninstalled and reinstalled.  I finished this process 3 times now.   What else should I try (in addition to resume the printer?)

  Hi RPG_78,

  Welcome to the HP Forums!

  I understand that you can not print in Windows 8.

  I suggest a different manual uninstall. Then use our printer HP install wizard for Windows for a re - install.

  Hope this helps, thank you for posting.

• Impossible to print via USB using my iMac running 10.6.8 Officejet 4635

  I bought this printer all in one HP Officejet 4635 yesterday and are unable to print via USB.  I have an iMac running OS 10.6.8.  Until I'veI tried all of the suggestions that I could find on these forums (ex: downloaded the latest driver, disconnect/reconnect the power to disconnect/reconnect usb, delete and 'Add PRINTER' again, etc...) The computer does not recognize the printer, but displays "Unable to send print data" after I click on print.  I know that the printer works very well because I was able to send the document directly to his personal email address.   Help, please!

  Hello! Welcome to the @DanLA forums

  I have seen your post about how you can't use your Officejet 4635 with your iMac running 10.6.8. I understand that you have already tried troubleshooting, so please ignore all the steps that you have already tried in the list of my own suggestions below. If you still can not connect then, think of give us a call. I'll leave the details below.

  1. Mac OS X: how to reset the printing system
  2. Repair disk permissions
  3. Restart your Mac
  4. Reinstall the complete driver: 4630 Officejet HP e-All-in-One Printer full feature software and drivers series
  5. Try another USB cable
  6. Look for an update of the Firmware: get the latest Firmware and updates
  7. Make sure that the printer is plugged directly into the wall, avoiding bars power and surge protectors. This ensures that the printer is full on and can help.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Good luck!

• OfficeJet 6500 began suddenly printing documents less than full size

  What setting I should do and how can I do?

  Thank you

  Hi hmcgee3,

  Welcome to the Forums of HP Support! I see your HP Officejet 6500 has begun printing documents less then enlarged.   I would be delighted to help you to save and print actual size but requires a bit more information:

  1. what program you print from?

  2. What is your current operating system, Windows or Mac and what version?

  3. How is the printer connected, USB or wireless?

  4. do you get an error message when you try to print?

  5. If you open wordpad or webpage you are able to get a full impression?

  If you have a Windows operating system later than XP, please start here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know what the PSDR find, I'll watch for your reply.

  Thank you

• OfficeJet 4635: print pages in good arrested

  How can I set up my printer to print the first page first, not the last page first? I have an Officejet 4635 all-in-one.

  Hey @luckyjoe,

  Well, after some additional research, you are right, that the page option is not there to change the order of pages. It seems that they have the option taken in 32 Version of the software. I have no explanation for you as to why it was deleted, I apologize for the confusion.

  You can always try and use another driver, but you may lose some other characteristics. Have a look here: How to assign drivers to Print in different Versions of Windows.

  Thanks again,

• Cannot use my printer Officejet 4635 to the Mexico. Printer does not recognize the new cartridge.

  I moved my printer in Mexico City, HP Officejet 4635. It uses #61 cartridges. I was told that the 61 in the United States is the same as the #122 to the Mexico. However, the printer say it does not recognize the cartridge.

  Can someone give me some advice?

  Hi artist1234,

  Welcome to the HP Forums.

  Why the printer does not is because the unit is not regionalized for this part of the country.

  To get the printer to work, you will need to contact HP Total Care so that a representative from HP can regionalize the printer for you.

  If you call in North America, the number is 1-800-474-6836.  Seeing that you are in Mexico, please click here to access the information page you need.

  Thanks for your time.

  See you soon,.