Similar Questions

• During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't

  During upgrade Adobe Creative Suite CS4 ME in Adobe Creative Suite CS5.5 Design Premium, I get an error saying that the serial number is not an eligible product, please try another. I used to be able to get a code for the customer service, but I can't chat. Please advise!

  MoeGhazal I have reviewed your account and it seems that you have upgraded to a volume license CS4 Design Premium for an upgrade of retail Design Premium 5.5.

  I also shows that you have made two purchases of CS5.5 Design Premium, but the second purchase was cancelled.  Make sure that you use the serial number that ends in 7886.

  If you are using the correct serial number, then it is likely, that the installer won't recognize your serial number of volume license CS4 as being valid for upgrade.  If you can contact our support team you can be traversed through an unlocking procedure to allow you to proceed with the installation.  You can contact our team of support directly in Contact with the customer.  You can try to install a web browser, you have not previously used.  It of probably a toolbar or other software applications affect your ability to access the media cat successfully.

  If you are unable to reach our support team, then please check your account information is accurate.  If you can please then update this discussion after the confirmation of this so I can ask a member of our support team contact you directly.

  I would recommend again reaching out directly if possible it will be the most effective method to resolve your current error.

• Web service data control - how to use the data for the axis2 service manager

  Hello
  
  I have the following questions:
  I consume a Web service using the web service based on axis2, MTOM data. The webservice response returns a complex response object.
  
  1. How can I link the (type axis2 DataHandler object) the response content to be stored in a column of data?
  2. in the response object, the name of the file is stored in a hash table structure, how can I retrieve the value of a specific key only? In an ideal world, it's a no-brainer, in ADF(newbie here) I do not know how to extract it?
  3. in addition, the display of collectibles for a response from webservice with a radio button beside each line?
  
  Any help is greatly appreciated.
  
  Thank you
  J
  
  Published by: 843190 on March 22, 2011 18:16
  
  Published by: 843190 on March 22, 2011 18:20

  Is the part of the information that you want to display available as a separate attribute in the results of the Web service in the data control panel?
  If not, and you do a manipulation of the result to retrieve content, you can consider creating a Java proxy for the Web service, in that proxy to expose a method that gives you the news you need and then expose the proxy as a data control. Then, you can call the specific method to get the specific information in the format you need.

• How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO.

  How to buy only a few songs, without registering for the new service? It seems compulsory now, and I DON'T want TO. Could someone tell me just for the selection of the menu where I can search for a song by keyword and buy it?

  If it's on your iPad, then go to the app Store in iTunes, you can buy music from there

  If you do not want to use Apple music then turn it off on your iPad via the settings > music > Music Show Apple 'off '.

• I paid for the bad service. What I can do. Can I cancel and get my money back?

  I paid for the bad service. What I can do. Can I cancel and get my money back?

  Hi rosap51255307,

  I checked your account using the email address that you use in the forums - there is no recent purchases subscription (although it seems that you subscribed to ExportPDF in January). What service tried you to cancel?

  You can cancel yourself by following the instructions in this document: cancel your subscription or membership. Acrobat, Acrobat.com online services (but please note that Adobe only offers refunds for cancellations that occur within the first 30 days of subscription).

  Best,

  Sara

• WebGate to access server connection status:-different status for the AM service

  What will be the effect if I pass ON the "Access Management Service" in Webgate. I understand that it will take to have the value WE for AccessServer-SDK. Died in Webgate translates into the following test posted on Webgate of the access server connection to the ' page.
  

  Does not
  Different status for the AM service

  thank you!
  Kabi

  Hi k,

  You only need the access management API if you are explicitly using the API Policy Manager (custom application), or for certain operations during some integrations (for example with Weblogic). Then, you can just assign it 'No' on all access servers and WebGates, or to 'Yes' If you think that you use.

  Kind regards
  Colin

• Delay (30000 milliseconds) waiting for the SNMP service to communicate.

  When I start the SNMP service in Windows Server 2003 Enterprise 64-bit (SP2), the event ID 7009 (Timeout (30000 milliseconds) waiting for the SNMP service to communicate.), kindly help me to solve this problem.

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/winserverfiles/threads

• Data for the Web service control

  Hello

  I have jdeveloepr User 12.1.3, I WSDL soap, I create the data control for the web service from the WSDL, the problem is when creating data controls the separate parameter that the method, for example, below it is the method that I call the setNotificationAction name and the parameter IN (P_ACTION, P_NOT_ID, P_PASSWORD_ERP, P_TOKEN (, P_USER_ID P_USER_ID_ERP), as below, why the separate parameter that the method?

  Note that I try the binding WSDL SOAP UI and its ok and works as expected.

  

  Resolved by changing the typesList.add (Object.class) at typesList.add (GenericType.class)

• END point URL for the routing service BSE says not FOUND

  Hi all

  For services of routing in BSE, the WSDL link opens the fine, but the link to endpoint URI for the routing service fails with the message below the message. When I invoke the WSDL with SOAP UI, I'll be back the same error message. I tried to bounce the server, but no help. I also noticed that this slide ESB_Projects Directory gives error 404 on any browser.

  Then, when I click below url for all the routing service

  http:// < hostname >: < port > /Event/ < systemName > / < serviceGroupName > /AddressStandardizeRS

  I get the error in the browser - below

  Not found

  The URL /event/ requested < the system name > / < group name > / < Routing Service name > was not found on this server.

  Oracle-Application-Server-10g/10.1.3.1.0 Oracle-HTTP-Server Server at odevsoa.local1.wbcgp.com Port 7777

• How to choose the account used for the sharing service Google/Gmail?

  I am always connected to three separate Google/Gmail accounts at the same time. Each is used for different projects/types of communications (e.g., personal work, another project). I want to use the service of sharing, but when I click on share it does not give the option to choose which account to use. This makes the sharing service for the most useless. Could you if you please correct this? Thank you!

  I missed this: https://activations.cdn.mozilla.net/e.../gmail.html and, even though I am connected to multiple accounts. I asked the team about this feature. However leave a comment for developers input.mozilla.org is also a great place to request this feature.

  It seemed so nice:
  https://addons.Mozilla.org/en-us/fire.../?src=search

• Is it possible to use a Type of personalized content for the REST service operation messages?

  I try to POST to the third party, documentum of EMC, REST service using service broker in 8.53 peopletools integration operations. Unfortunately, the third party only accepts a content type of 'application/vnd.emc.documentum+json', which I could not send PeopleSoft and use a message definition at the same time.

  In my service operation, if I do NOT fill the request message I can POST to the URI with the such custom content type defined in the property page of the connector in the routing. I have not found a way to do it and also present JSON content on demand, since there is no message associated with the operation. Is it possible to include in this type of message content without using a request message?

  If I DO not fill the request message I can't POST successfully because the message content-type of "application/json" gets passed as the content-type instead of the value in the property page of the connector from the routing. Is it possible to change the content type during the use of a message definition?

  Thank you

  Paul

  Hi Paul - you can turn on tracing by using the on demand connection as follows:

  1. on the routing set detail header and detail "journal".

  2. Main Menu > PeopleTools > Integration Broker > Service Operations Monitor > Administration > control installation Options

  -Enable logging of the bridge

  -On the registration of demand = 5 (to enable detailed logging)

  Note: On request connection only works for the outgoing synchronous Services. In this case, we should be fine. You will find the by transaction log file on your gateway web server... / applications/peoplesoft/PSIGW.war/WEB-INF/.

  I did it for one of the REST service operations my test (I'm on 8.52.22). I have my content type of message the value application/json to the operation of the service page. On the routing page, I added a connector property content-type=application/vnd.emc.documentum+json.

  Here are the results on the integration gateway logs:

  Message-ID:<-.................@nowhere>

  MIME-Version: 1.0

  Content-Type: multipart/related; Boundary = "Integration_Server_MIME_Boundary."

  Content-ID: PeopleSoft-internal-Mime-Message

  PeopleSoft-ToolsRelease: 8.52

  -Integration_Server_MIME_Boundary

  Content-Type: text/plain; Charset = UTF-8

  Content-Transfer-Encoding: 8 bit

  Content-ID: IBInfo

  Content-Disposition: inline

  Sync There ... * deleted for security purposes *... ContentSection0text/plainN

  CREATE5000000000000

  -Integration_Server_MIME_Boundary

  Content-Type: text/json

  Content-Transfer-Encoding: 8 bit

  Content-ID: ContentSection0

  Content-Disposition: inline

  username = * collected for security purposes * & password = * deleted for security purposes *.

  -Integration_Server_MIME_Boundary-

  The Content-Type of the delivery is sent as HTTP Connector of the target and the content of the message (text/json) Type property is always persistent (see the text in bold above). You can compare logs between your two scenarios (with and without the message in the POST) and see if you find something interesting.

  I even tried the following code to see if that helps, but I get the same results.

  & MSG. IBInfo.LoadRESTHeaders ();

  / * Adds additional headers not defined on the route * /.

  REM & MSG. IBInfo.ConnectorOverride = True;

  bRet = & MSG. IBInfo.IBConnectorInfo.AddConnectorProperties ("Content-Type", "application/vnd.emc.documentum+json", % Httpentete);

  & RESP = IntBroker.SyncRequest % (&MSG);)

  I'm working on a similar project at this moment where I'm integrating perceptual Nolij Web RESTful API (Document Management System). I had to resort to using a http client base (common of apache) java instead of broker of integration because of the similar frustrations with REST (cookies are lost, unable to deal with raw binary data in a response message, etc.).

  Benefits: Java provides total flexibility.

  Cons: As we are bypassing framework Integration Broker, we need everything (error handlng, logging, etc.) do it ourselves.

• What type of service you want to use for the Proxy Service

  I have a question about a service Proxy.
  
  I need a local (local transport) the Proxy service which is called by another proxy service.
  It is a synchronous service that has an incoming message XML and an outgoing XML message.
  
  I have the following questions:
  -Does make a difference in performance when I choose a webservice WSDL or a courier service?
  -Which would you choose and why?
  
  Thanx

  Does make a difference in performance when I choose a webservice WSDL or a courier service?

  There would be little difference.

  Which would you choose and why?

  I would choose XML type type e-mail proxy because the input and output XML messages. I choose WSDL web service because it should be used in the case of SOAP packagaing only (in the context of web service, to enable SOAP and WS support) to make fun of a web service that has a WSDL (and an XSD) that is associated with.

  Kind regards
  Anuj

• change the frequency for the web service

  I'm under LabVIEW Web Service with an application following the method shown in the example of weather monitor. But my problem here is that I have to keep clicking the Refresh button, then the Web Service can only update the latest data for me. Can someone help me to set an example on how to let the page Web of the Web Service automatically update the value without pressing the Refresh button. Thank you

  First of all your customer needs to support it. If you use the HTTP Client in LabVIEW (GET.vi and so on) you cannot use this method. A normal browser should.

  Take a look at the address book example FindContacts.vi.

  The help topic linked in the previous post, you should get on the way as well. The news are scattered throughout the help file, but it should be possible to understand.

  Basically, there are two output options for a web service VI: Terminal mode as used in the example weather and fashion such Stream used in the example address book VI.

  Use stream mode and build the HTML page yourself, then sends it to the browser with Response.vi write. Somewhere in the top of the HTML page, you need to insert

  If you need to return a string like

  
  
  
  
  
  If your browser supports Refresh,
  this page refreshes in 5 seconds.
  
  And add some real contents here
  

  See also W3C .

  Good luck

• Gets the error in Windows Denfender for "the specified service does not exist as an installed device (error Code: 0 x 80070424).

  My computer was slow, so I tried to scan all using Windows Defender, and this error message keeps popping up, "the specified service does not exist as an installed device (error Code: 0 x 80070424) I don't know how fx this.» I' of love too see if there is another reliable computer, free softwear that can scan and virus scanning spywear.

  Hello

  Windows Defender is an antispyware software, not an Antivirus.

  If you use Norton, AVG, Avira, Microsoft Security Essentials, McAfee, etc. the default action is for Windows Defender must be disabled, that these AntiVirus programs have their own Antispyware Applications.

  There is nothing to worry.

  Using both programs at the same time can cause system conflicts, etc.

  If you are using one of the above AntiVirus programs, this Information from David O - Support Engineer shows you how to manually enable Windows Defender (disregard information from uninstalling; not possible in Vista):

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-do-i-manually-start-Windows-Defender-in-Vista/dab845b2-9ba5-47F3-9518-c4c6781e7d5b

  "Go to start, Control Panel, Administrative Tools, Services. Look for Windows Defender.

  Right click and select Properties , ensure that Startup Type is automatic.

  Once modified, click apply and OK.

  Quit and restart your computer. Check the back take the same path to confirm that Windows Defender has started"

  .

  And for now, change startup Vista programs without using Defender, use one of these methods:

  "How to use MSCONFIG in Windows Vista"

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  Or the program Autoruns for FREE:

  "V11.21 Autoruns for Windows"

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@

  And try this method for the analysis of Malware

  Scan of Malware in Safe Mode with network.

  http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  Once in Safe Mode with network, download and run RKill.

  RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.

  http://www.bleepingcomputer.com/download/rkill/

  Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:

  http://www.Malwarebytes.org/products/malwarebytes_free

  See you soon.

• Any solution for "The Audio Service is not running"?

  Searching high and low on the Internet, I can't find a solution to the difficulty of the notification in the status bar:
  "The Audio Service is not working" even if my audio works.  I find that this problem exists for many people using Win7.

  I just found this link that Microsoft provided, (which means that it is indeed a problem acknowledged by Microsoft), but without any real fix.
  http://support.Microsoft.com/kb/2011656

  Hey, someone from Microsoft can we give a hint he will never be a solution to this?

  Thank you.

  Reach:

  Control Panel > administrative tools > view local Services
  It's the "service" window, it lists all system services. Find "Windows Audio", NOT "Windows Audio Endpoint Builder.
  [just click on any service, then press the letter 'W' on your keyboard, will need you the services starting with the letter 'w']
  Right-click on the "Windows Audio" service and choose "Properties".
  You will see 4 tabs, click on the last one, titled "dependencies".
  In this tab, you will see the box "this service depends on the following system components", it displays 3 services
  Next to each service, there is a "+" icon, click on it to expand the list. 2nd service 2 child services, the 3rd service will be 1 serving children.
  Now make sure that all 6 services (3-hand, 3 children) have the status of "started" in the "Services" window you opened earlier
  Most propably you will find one of these services don't work, just start all the, then try to start the service "Windows Audio" in the tab "general".
  That's all