Set the name of a Visible plot and color lines draw graphic legend of XY

Similar Questions

• How to set the name of principle user lowercase and samaccoutname

  Hi Experts,

  How to ad the name of principle SAMAccountName and user provisioning got capitalized.

  How can I set up an AD of and can set attribute AD in tiny i.e. SAMAccountName and the username policy.

  Ask for your help.

  Kind regards

  David

  Have you tried to use an adapter that will use the java code to set in lowercase?  You don't have to use the default prepopulate adapters.

  -Kevin

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• There are two select statement, which are as follows: 1) select project id, the name of ppm.pm_projects project_name and request_id 2) select id, name from request_type_name to kcrt_request_details. There is a column called entity that allows you to store

  There are two select statement, which are as follows: 1) select project id, the name of ppm.pm_projects project_name and request_id 2) select id, name from request_type_name to kcrt_request_details. There is a column called entity that can store a value i.e. project or request. I want to write a select statement containing a condition that is if the entity name is project and then run the select statement 1 otherwise, if the name of the entity's request, then run the select statement 2. All this must be written in a select statement. Can someone help me how to write this select statement type.

  Hello

  Hello

  2726057 wrote:

  ... There is a column called entity that can store a value i.e. project or request. ...

  In which table is this column?  Assuming that it is in a table called entity_table, you can do something like this:

  SELECT project AS id

  project name AS the name

  OF ppm.pm_projects

  WHEN THERE IS)

  SELECT 1

  Of entity_table

  Entity WHERE = "Project".

  )

  UNION ALL

  SELECT request_id ID

  request_type_name AS name

  OF kcrt_request_details

  WHEN THERE IS)

  SELECT 1

  Of entity_table

  Entity WHERE = 'ask '.

  )

  ;

  This does not have anything on the number of lines is entity_table, or what are the values in the column of the entity.  In other words, the query works in all cases.  If any line in entity_table entity = 'Project', then the pm_projects data will be included in the result set.  If any line in entity_table entity = 'Request', kcrt_request_details data will be included.

  I hope that answers your question.

  If this isn't the case, please post a small example data (CREATE TABLE and only relevant columns, INSERT statements) for all of the tables involved and the results desired from these data.

  Explain, using specific examples, how you get these results from these data.

  Always say what version of Oracle you are using (for example, 11.2.0.2.0).

  See the FAQ forum: https://forums.oracle.com/message/9362002#9362002

• I want to change the name that appears under 'To' and the 'author '.

  I want to change the name that appears under 'To' and the 'author '.

  No matter what particular place, or simply everywhere where you happen to be at this time?

• How to pragmatically set the name of the user event?

  In LabVIEW 2010, I register a user event during execution by using the function of events Reg, but I want to put the name of the user event, according to the runtime. LV said "If wire you a cluster at the entrance to the data type of the user events , LabVIEW uses the type name of the cluster in the event user name." But I need set the name of the event based on the data that is generated during execution.

  How can I pragmatically set the name of a user with data from cluster event at run time?

  I can do this by changing the text of the label of the bunch before I use Reg events function?

  How will I know what name the user never received?

  Thank you.

  I found a viable solution. I can create a user with a name known event. The event that is sent with the event data will include a Source DN string that identifies the sender of the event. The event handler can then handle each event based on the name of the Source. This is equivalent to have several unique named events, is only right they all share a common event data format, which is OK in my case.

  It works very well.

  THANKS for all the suggestions.

• need the simple way to set the computer back to factory settings, and already saved safe data

  need the simple way to set the computer back to factory settings, and already saved safe data

  Vista recovery media obtain and/or use the Partition Recovery Vista on your computer to the factory settings .

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Also ask them if it is possible to do the recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  http://support.Microsoft.com/default.aspx/KB/326246

  'How to replace Microsoft software or hardware, order service packs and upgrades, and replace product manuals'

  See you soon.

  Mick Murphy - Microsoft partner

• How to set the name of VM for VAPP instantiation

  Hello

  I'm trying to set the name for a virtual machine when its parent is instantiated VAPP from a model.  Note, I know how to change the name of the TIME itself, just not it's child VM.  The requirement to have this game during the instantiation is therefore the name of the computer in vSphere is in place.  Can someone direct me on how to do this?  Thank you.

  Hello

  in the API v0.9, it is impossible to change the name of the virtual computer on instantiation. One way to do that using dial operation, but 0.9 of the vCloud Director of Service, you are also not able to change the VM even if using the composition.

• Visible, thin and black lines around the layer mask.

  Hello, in a current project I'm finish, there visible, thin and black lines around the perimeter of each layer. These layers have layer masks. I tried to merge the layers (shift, ctrl, alt + E) and flattening, but the lines are still visible. Help, please!

  Thanks in advance!

  Photoshop CC

  Windows 8.1

  3.7 ghz I7

  64 GB of ram

  1 gb player/os ssd

  16 TB Raid 3 array work / scratch

  You must read and watch tutorials masking. Look at sites like Russell Browns to topics such as advanced masking and extraction and practice. Sometimes its inpossible create a very good mask in these cases, you need to fix it

  

  

  full size link http://www.mouseprints.net/old/dpr/TryHard.jpguse open the link in a new window or tab.

• How to set the name of the font?

  Hi guys,.

  Can U tell me how the name of font difine in flash builder?

  I want to set the name of the font.

  Please help me

  fontWeight = "bold".
  textAlign = "center".

  Thank you

  JaxNa

  fontFamily

• AVI Clips imported into CS.5.5 has the color green and colored lines

  NOTE:

  I use the video monitor for the CS5.5 program.

  Always trying to between CS5.5 and test the trial version. The new challenge is the color green and colorful lines on the imported. AVI files.

  Of course, some advice would be appreciated. Thank you.

  nVidia card?  Go to the nVidia Control Panel and set the parameters of quality 3D of 'let the application decide '.  If you have an ATI card should there be similar parameters.

  -Jeff

• How to set the name of resource VISA as a constant?

  I'm properly communicates with a device series using ModBus. The drop-down list on the front displays correctly COM3. I would like to remove from the drop-down list and set default COM3 on the block diagram. Can someone tell me how to do it please? Thank you very much

  Hello

  Right click on this drop-down list and select replace by, constant...

  So you can see the name of constant of Visa on the block diagram and no need to pull down...

  Pals

• Set the name of the network on a Windows 2012 without Active Directory Server

  I have a Server Windows 2012 I use for DHCP, DNS and NAT on a network without a domain controller, and I don't want to create a domain.

  When my Windows 7 clients connect, they identify the network with the name of 'network '. Is there a setting on the server, Windows 2012, that will allow me to change the name that clients identify the network with? I want something that is on the side Server and not to go and rename it on each client manually.

  I noticed low-end devices how as access points, modems etc use their own custom network that clients identify their network with, so I guess it cannot be something too difficult...

  Thank you in advance.

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• All-in-one HP Deskjet 2540: How do I set the default to print in black and white only

  The manual says this, but it applies to a PC and I have a Mac:

  "If you want to print a black and white document using a black ink only, click on the Advanced button. Printing from the drop in grayscale, select black ink only, and then click OK. »

  Someone knows how to set the printer to print only black & white for a Mac?

  As an accompaniment, there are security settings that must be configured to reduce the risk of access remotely for the printing device?

  Thank you

  Hello
  Follow the steps below to print using black ink only:

  1. from the application used to print, click the file menu and select print.  The print window is displayed.
  NOTE: The print window might be minimized: click Show details to display all available parameters.

  2. to access the color options, click in the area of selection below, listed as the name of the program (e.g. TextEdit)
  Will appear as Copies & Pages within Microsoft Office applications.

  3. Select Type/quality paper in the menu dropdown.

  4. click the triangle next to color Options of spending parameters.

  5. set the color to grayscale field.

  6. set the Mode to grayscale in black cartridge only.

  You can save the settings for later use by clicking preset > save current settings as preset... Once you print using the saved preset will remain by default up to what we will choose another preset.

• Set the name of server report dynamically at run time

  Hi guru,.
  
  I called reports of the forms that I hardcode the name of report server in my code.
  Is there no alternative to set the server name of report dynamically at run time, is how to find the name of the report server and that in through my code as a parameter.
  
  
  can you give some examples of codes... Thank you

  One way that we usually followed before was to store the name of the report server in other tables in the database, then choose this name whenever we want to run a report.

  In this way, it is easy even if there is no change in the name of the server.