'set the output to the PC.

Similar Questions

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• How to set the output meter channel to generate a signal pulse using DAQ6008

  Hello there I am generating a pulse signal of 100 Hz and a duty of 20% of the 6008 data acquisition cycle using visual studio 2013. I have code that needs to generate this but I'm not sure on how to set the channel output meter. When I run this NI MMAX and my vb error code indicates that the physical channel is not supported. I am a user of data acquisition were first and would appreciate any help offered.

  If you look at the USB-6008/6009 User Guide and specifications, you will see that the counter in these devices cannot rely as edges of entry. It cannot generate a pulse.

  Lynn

• Is there a way to set the audio output in mono in Windows 7?

  I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

  Hi Jamsoup,

  I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

  Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

  I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to set the police Chinese in the output PDF report 12 c

  Hi all

  Form 12 c can call report 12 c, but Chinese display font can't correctly, someone has config guide how set the font Chinese in the PDF report 12 c output. Thank you!

  After installation of Patch for Bug: 22224336, can display Chinese fonts properly.

• How to set default output in the SOUL?

  Is it possible to program a default output preset?

  I never nothing to F4V Encoder but frequently encode in H.264 format. It would be great if I could set the output and predefined format.

  -Darius

  Rallymax is correct about the case where you export agency. Similarly, if you import a work directly in the SOUL and change the F4V in another format to export/preset, then SOUL usually apply the same format/preset for the jobs that you import.

  However, there are cases where the SOUL returns to F4V to imported new jobs. One of these cases: export a job to reset AGENCY 'Memory' of the SOUL, so the following import enters the queue as F4V work.

  A way to get the location format every time is to drop the source directly on the preset desired in built-in browser of SOUL. To facilitate the search for your favorite presets, consider creating an alias for the predefined system or predefined custom, which can be an exact copy of a "Preset" System. Whatever it is, the new preset appears in the presets section and groups of users in the upper part of the built-in browser. While we are in the neighborhood, I would call one of the handyest new features in CS6: you create a custom preset group, add an assortment of aliases and custom presets. Then, when you drop a source on the record of the group, SOUL will add the source to the queue with an output for each preset in the group. Voila! A batch created in a single step.

• How to set the output of the report to the session variable

  Hello
  Is it possible to output report to the session variable value. If my report returns 1 row and 1 column.
  
  I have a dashboard command prompt where I select name, but I want to find the ID of the same name.
  This ID I want to move to a Fx column, to achieve this, I created an interim report and I got the code. Now my problem is how do I put this ID in the session variable.
  
  Please help if anyone knows...

  Have you read this:
  How to set the session / presentation in the repository variable variable

  Dashboard invites on Month Name but the report on the ID of the month filter:
  Re: Guest dashboard on the name of the month but the report on the necessary month ID filter

  If you have dashboard guest (name), then you can have that one report that is filtered by a name but present card to display or not id but use id in the service. Or two reports as in the solution in the second link above and the second report has id in the function and filter by the id of the first report. You need not define this ID in the session for this example variable.

  Please close your previous discussions, if they are treated.

  Concerning
  Goran
  http://108obiee.blogspot.com

• Set the rotation of the screen to external monitor on Portege M400

  I would like to be able to use the screen of the mobile phone in the form of tablets, while the display to an external monitor. The problem is that when you use the laptop in its Tablet configuration (fixed and swivel screen on top) the external monitor displays the image upside down. If I rotate the screen image output, so I use the Tablet upside which is impossible when it is docked. Is it all the same independently set the rotation of the screen of the Tablet and the external screen?
  If someone could help me with this I would be grateful as at this moment whether or not I have to remove the Tablet and use backwards the external monitor.

  I use Windows tablet PC on a Portege M400 and a monitor external 22 "LCD

  Thank you.

  Before we start the discussion I just have one question: do you want to use extended desktop or office cloned on external monitor?

• HP Envy 7640: Unable to set the scanning resolution

  Have been unable to set the resolution of scan during the scanning of the glass in a computer file (pdf, jpg). Guide the user to the HP page 47 7640 said: "● If you want to adjust the size of the scan, output type, scan resolution, or file type and so on, start scan from the software of the printer."
  ● To avoid all scanned text wrong or missing, make sure that the brightness is set properly the
  software.
  ● If you want to scan a document with several pages in a single file instead of several files, run it
  Scanner with the software of the printer instead of the sweep of the screen of the printer".

  First of all, where is the "printer software" to start the scan?

  Have tried all this. When I opened the series HP Envy 7640 (network): Assistant of HP printer, I click on "Scan the Document or Photo a" place in the scanning area. No scan dialog box never opens. Actually I tried to reinstall the printer driver. No change. Always impossible to get a scan dialog box. In addition, when I go in the start menu and the title of the series 7600 HP: HP envy, I click on the HP Scan icon. After a long wait, a dialog box appears that says: "Cannot communicate with Scanner", and it offers a few options. The first is to activate the device (printer), and then on; the second, control cables (its wireless operation); the third: try the software "fix." Happy to report that after stopping then on and running assistant printer again, this time by pressing the "scan a Photo Document' results in the appearance of a dialog box to make the changes that I've been looking for.

• setting the parameters of serial port VISA does not persist

  When I set the baud rate using the VISA's Interactive Control Panel for a serial port specific (ASRL) and then close the window for ASRL, baud rate goes back to the default value.  Why doesn't baud rate?

  Also when I change the port settings for a particular serial port (COM) on the side of Windows, why can't I see these same port settings when I look at them from the interactive panel of VISA?

  Also, when I set by programming the output baud rate for a particular ASRL (code C), why is it reset by default when I re - run my program and do a get on baud rate?

  Some information:

  My C program works on an industrial PC which has a PXI MXI connected to it expansion chassis.  Series 3 cards in the expansion chassis.

  When you close the VISA session and/or close your application, port settings in the system default values.  It is a very normal behavior.  As long as you keep your open VISA session, the port will behave how you already told (set Baud Rate, etc.).

• Problems with the DC Power supply QL 355TP: I can not set the tension level

  Hello

  I'm trying to control a power supply DC via GPIB. The power supply being used is the QL355TP of society Thurlby Thandar Instruments (TTi). There are no drivers of OR to control the instruments, then I need to download and install the driver from the website of TTi: the package I installed is as follows:

  "QL - P power supplies, (including QL Series II) series pilot National instruments (Labview and CVI)"

  and I also installed the following:

  "QL - P power supplies (including QL Series II) series, IVI driver"

  So, my problem is that when I try to use the sample application of the driver 'Volts.vi DC Ouput'; defines a specific level voltage, does not work properly. The application gives no error, but it is not set the specific level voltage. However, other functions work properly, as the measure or activate the output. I tried a lot of things, but I don't know why it does not work.

  I enclose the block diagram of the application and the front panel:

  

  

  I must say that I barely control instruments using Labview and is possible that this problem would be because I did not consider things basic and mandatory.

  Any help is appreciated.

  Thank you.

  p.s. Try to replace the decimal comma to period. It is possible that the driver does not correctly handle the comma.

• Set the string for LabView dll parameter

  Hello

  I created a simple vi LV 2010 (departure vi), which reads the identification of an oscilloscope. Then I take this vi and incorporate it into a dll of LabView. I have test the dll calling LabView (RunFrom dll). Basically, it seems to work, but len and ReadBuffer back empty. It must be in the way I'm configuration configuring the setting for Readbuffer (settings) in the configuration of the dll. I tried several different configurations, but nothing seems to work. Any help is appreciated!

  What is the parameter len?  Normally, you should only set the length of the string, but it seems that you did not do this.  Also, you're passing len by value, and not by reference, so the function is expecting her to be a starter and you will never get return a different value to any value that you provide.

  Do not use a local variable of the ReadBuffer for entry "readbuffer".  You must pass a string initialized long enough to contain the expected quantity of data.  The best way to proceed is to use the array to initialize to create a table of U8, then use the array of bytes to a string.  Set the parameter 'minimum size' to 'len' then run through the length of the string initialized (this is not mandatory but is recommended).  If you need the length obtained output, add another indicator and another parameter to this value.  There might be a way to do it with one by len parameter passing by reference, you need to experiment (it is certainly feasible in C but I don't know if allows him to LabVIEW).

• HP laptop - 14-ac122tu: no option to set the brightness of the screen

  I recently loaded a Windows 7 64-bit OS and there seems to be no option to set the brightness of the screen. I tried in the power option and the f3 f2 keys. I tried a few things mentioned in some forums as uninstaling the monitor, but there seems to be no way of setting it. Am I missing some drivers? I installed the drivers in the link

  http://support.HP.com/us-en/drivers/selfservice/HP-14-AC100-notebook-PC-series/8499318/model/8876444... .

  Please help me solve this problem.

  It's interesting that nothing works.

  These files are from the ac122 support page!

  Try this one...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72592.exe

  If this does not work, try this one...

  This package provides the driver that allows graphics Intel high definition (HD) in the notebook models that are running an operating system supported. If the video output high-definition multimedia interface (HDMI) is supported, this package also installs the HDMI Audio Driver.

  File name: sp72585.exe

  If this does not work, try the driver directly from Intel.  3rd file downwards on the left for 64 bit.

  https://Downloadcenter.Intel.com/download/25274/Intel-graphics-driver-for-Windows-7-8-1-10-15-40-

  If none of the above, unfortunately, work I don't have any other suggestions for you to try.

• LaserJet Pro 400 M401n: How to set the margins for binding up and left for LaserJet Pro 400 M401n

  I am connected to ePremis (medical site) that allows me to print the selected medical forms. ePremis uses the default printer to print the selected form.  The selected form should be printed on a preprinted form that I load into the tray of the printer.

  The problem is that ePremis does not provide an option to set gutter margins and print aligns correctly with my pre-printed form. The print position is a little weak and must also be shifted a little to the left. I need to reduce the high binding margin to move the position of superior print on the page and the left binding margin must also be reduced to move the print a little position to the left so that the printed data will properly align with my pre-printed form.

  Since ePremis does not offer an option to set the margins of the gutter, I need to be able to set the margins of the gutter through the printer driver, but there is also no option provided by the printer driver dialog box to set the margins of the gutter.  :-(

  Is it possible to set the printer LaserJet Pro 400 gutter margins?  I see the margins left and right options in the driver dialog box printer, but they are grayed out and cannot be changed.

  I have another printer, Kyocera laser printer, and I don't have this problem with the Kyocera because it offers the possibility to set gutter margins in the printer driver dialog.  I wonder why the LaserJet Pro 400 does not provide this option?

  I perhaps could solve this problem by sending PCL6 commands to the printer before printing?  I'm a programmer and am open to this option if it would work.

  Your help would be much appreciated.  Thanks in advance!

  Setting margins generally depends on demand - but (you say) that your application does not allow this.

  Some printers provide functionality of saving images , whereby the position of the image of the page onto a physical sheet can be adjusted to the printer, usually on a basis of by-tray.

  For example, with my Laserjet Pro MFP color 400 M475dn, the appropriate menu/menu item is described as follows:

  

  Note:

  • This setting applies to the bar up this that changed, so will have an impact on all the tasks using the specified status bar.
  • Not all printers support these features - I have no idea if your LaserJet M401 exercises or not.

  With regard to the '... sending the commands to the printer before printing... PCL6«» :

  • PCL6 (PCL XL) rather more autonomous than PCL5is, so I'm pretty sure that nothing you can "send" to the device to influence the outcome of the following printing.
  • Even with PCL5 print jobs, standard printer drivers are "overcome and-tail' with universal output language (UEL) escape sequences (which reset the device to the market environment (user - default)), which would be too mount sequences exhaust specific PCL5 previously sent to the device.

• IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Original title: IBM think centre @ start request.

  IBM think centre @ request for initialization of the system user password and a genius set the bios to lock keyboard can it is bypassed and how?

  Hi brandon1980,

  I recommend you contact your computer manufacturer for assistance. The manufacturer would be able to give details about the BIOS (Basic Input Output System) and find out if this feature can be disabled.

  Hope the helps of information.