Set the position of the cursor

Similar Questions

• How to set the cursor in the text of a message response

  I use TestStand 4.1.1. During testing, I need to analyze some data of the operator.

  I use a popup message with the response enabled text box. My problem is that the cursor does not automatically appear in the running text box. I don't want to have to put the mouse in the box every time.

  Is there a way to set the cursor to be automatically in the text box.

  Kind regards

  Don1.

  Hello

  You must make the answer box the active control. You will find 'Active Control' control in the main tab of the configuration of Message box Properties window.

  Concerning

  Ray Farmer

• problem when you set the cursor position

  I'm trying to nodes of property allows you to set the position of the cursor on the program, following pressure of arrow key.  When my plotted actual data file, the position assignment does not work correctly.  If I erase the data on the graph (right-click, claire graph), the cursor responds properly.  I've attached a file compressed with VI that illustrates the problem.  Sorry, that file is large - I had to include my data file to properly illustrate the problem.

  Thanks for all the advice that helps me to clarify it.

  Allan

  Bracker says:

  I'm trying to nodes of property allows you to set the position of the cursor on the program, following pressure of arrow key.  When my plotted actual data file, the position assignment does not work correctly.  If I erase the data on the graph (right-click, claire graph), the cursor responds properly.  I've attached a file compressed with VI that illustrates the problem.  Sorry, that file is large - I had to include my data file to properly illustrate the problem.

  Thanks for all the advice that helps me to clarify it.

  Allan

  Include this code in the State "initialize".

  

• Is it possible to get/set the cursor position in a TextArea?

  Hi all

  I went through the documentation and can't find a way to get/set the position of the cursor to a TextArea. Someone has an idea?

  Thank you

  Dong

  You want to see the property "Editor"? https://developer.BlackBerry.com/Cascades/reference/bb__cascades__textfield.HTML#editor

• How to set the cursor does not to meet the opening?

  When Karma rings in my pocket, it always ends slide open like I'm taking it out. This answers the call, the caller is confused until I have finally get the phone to my ear. Worse even if when he slides partially open and then closes in the process, therefore hangs on the appellant. Is it possible I can set the phone to answer when I press the reply button?

  I had the same problem and never found an option to stop the opening of the slide to answer a call.  (Looks like another option that Motorola could include in an update of the firmware... If they ever come out with one.)

  But you can stop the call answer and then hang up.  Go to settings > Intial configuration > Slide closed and assign the task to continue.  At least if you change this setting, the call don't hang up while you get the phone to your ear and your pocket.

• How to set the cursor to TextField type uses

  Hello, hope someone can help. I am importing HTML into a TextField called "webText_htm". I also called CSS and it strives to the text style. Player 8 and ActionScript 2
  
  When I mouseover TextField, the cursor changes to I the bar.
  Second problem is that < a href = "" > the hand cursor not report and does nothing when I click on it.
  
  Thanks in advance
  Greg
  
  
  
  

  Eureka! The source of the problem was that if you call createTextField, I don't have to also have another instance of the TextField object on its own layer.

  Maybe this will help someone else.

  Shrinktight

• set the cursor is frozen on the windows xp-based computer

  cursor appears in the center of the screen and can not be moved with the mouse

  cursor appears in the center of the screen and can not be moved with the mouse

  a complete AV scan may be a VIRUS. In addition, if a wireless mouse check the batteries.

• How to set the cursor focus to an element on a form

  Is it possible to set_focus_to different items on a form according to the choice of options in the radio button group.
  
  So basically I want to control the focus of cursor on the different points on the shape based on the selection of option buttons appears.

  Yes, it is possible, but requires javascript.

  Basically you have an onchange event on your radio group, which checks the changed value and focuses on the corresponding element.

  brgds,
  Peter

  -----
  Blog: http://www.oracle-and-apex.com
  ApexLib: http://apexlib.oracleapex.info
  Work: http://www.click-click.at

• Set the position of the cursor in the text added (to make the part of the text in index) in WORD using Report Generation Toolkit

  I would like to generate a report in WORD using the report generation toolkit.

  Whenever a text is added to the report, the program should put part of the text index. The problem I am facing with is to set the cursor position in the current location of the text.

  Any suggestions?

  Hello!
  I think that's what you wanted (see attachment).

  First, you must set position for each loop, so after adding the table, your cursor index need to increase the number of added characters. That's why I have included the text of the report, Append - to get the position of the cursor at the end.

  Indexing begins with 0, so you need to set the 3 and 7.

  Hope you get what I mean

• How to set the location of the active cursor

  I'm having trouble trying to put the asset "x axis" cursor without interrupting the other parts of the code. I have a graph of waveform and I want the window to be properly windowed to zoom in on the interesting part of my data. I also have cursors that I want this particular part of the processed data. Unfortunately when I try to set the cursor position and the display area of the code window will do either one or the other. I tried to change the order of the scale minimum and maximum x and beginning and end cursor x posts... all that I got is different combinations of window size/cursor positioning. I'm confused. Why the property node addresses some items and not others? How can I get my automatic zoom window and my Cursor for self-standing at the same time? Here is an example of the code...

  

  Ignore the rose as downstairs. It is not connected to the property node, it just happens to run behind him and it doesn't bother me to keep it there.

  Any help will be greatly appreciated! Thank you!

  Hello

  I'm not so sure... but why not try to use different structures for each process? Try to use highlight for execution see the order of what is happening in your software and then you could determine if you should use a sequence of plate or structure of the event.

• Change the position of the cursor?

  I just finished creating 3 forms with 60 + text fields each with Acrobat X. To my dismay, I discovered that when you type in the text field, the text in the middle (framed on the left) of the text box to the place from above.

  How can I solve this problem/set the cursor position?

  Thank you!

  You must change the multiline text fields text fields. This is in the text field properties dialog box in the tab options.

  Andrew

• Entry text box loses focus after setting the innerHTML

  I'm trying to change my widget so that it supports the search when you type.

  But when my javascript event fires to submit ajax request entry box retains loses focus.  I tried to reset the focus after writing the html code with blackberry.focus.setFocus (), but this function sets the cursor at the beginning of the entry rather than at the end zone, so I can continue typing.

  Is it possible to update the html code in a DIV without losing the focus on my entry box, or there at - it a way to make the blackberry.focus.setFocus () to go to the end of the string currently in the box?

  Here is an example of the code that I am trying to work in my 9700 Simulator:

  ------ JS Code---function doLiveSearch(str) {  if (str.length==0) {    document.getElementById("results").innerHTML="";    return;  }   xmlhttp=new XMLHttpRequest();  xmlhttp.onreadystatechange = function() {   if (xmlhttp.readyState==4 && xmlhttp.status==200) {    document.getElementById("results").innerHTML=xmlhttp.responseText;     blackberry.focus.setFocus("search");    }  }  xmlhttp.open("GET","livesearch.php?q="+str,true);  xmlhttp.send();}
  
  ------- HTML Code-----
      
  Search:
             
  
  
  ----here's an example what my lookup code returns.----
    
      One      
    
      Two      
  

  Try with selectionStart and selectionEnd before focus:

• Return of the ref cursor of procedure where the cursor is defined in the specification

  Hello
  
  Here's pseudo-code
  
  create or replace package test
  as
  cursor c_emp (number cv_emp_id)
  is
  Select emp_name emp where emp_id = cv_emp_id;
  
  type ref_c is ref cursor;
  
  function get_emp_name (number p_emp_id) return ref_c;
  end test;
  /
  
  
  create or replace the test physics package
  as
  ref_c function get_emp_name (number p_emp_id)
  is
  ret_val ref_c;
  Start
  Open c_emp (p_emp_id);
  ret_val: = c_emp;
  return ret_val;
  
  end get_emp_name;
  end test;
  /
  
  Returns me "PLS-00382: expression is of the wrong type. I tried to use a strongly typed Ref cursor based on the cursor, but nothing helped.
  
  Clearly, I understand something... and if I can't assign as ' ret_val: = c_emp "and if there is another key way it so please let me know.
  
  Thank you
  
  Ralph
  
  Published by: user13024707 on May 5, 2010 04:43

  user13024707 wrote:
  Clearly the point of my question is being missed.

  Or maybe the question is not been clearly asked. ;)

  I want to set the cursor in the PACKAGE SPECIFICATION, and not in the package body. The issue of the bind variable and the string is neither here nor there because I pass parameters to the cursor.

  What you ask is to use a PL/SQL cursor (defined in the specifications of the package or elsewhere) and that convert a Ref Cursor. N ° cannot be done.
  PL/SQL cursors should be used in the PL/SQL code. REF CURSOR is primary used to pass back a reference to a cursor (and all queries are cursors) to a layer of application outside of PL/SQL for example .net, java, etc.. Once you start using the ref Cursor only really, you have the choice of opening it based on a (dynamic) or a fixed query string as in the examples given. You cannot open a cursor of a PL/SQL cursor definition Ref.

  The difference is that when you do:

    CURSOR cur_mycursor IS
      SELECT ...
  

  you declare a cursor in pl/sql definition, not actually a slider itself. The cursor itself is created when you issue an OPENING or a statement FOR etc. So a Ref Cursor (reference to a slider) cannot refer to the definition of the cursor because it is only a definition, not a cursor (i.e. it has not been sent engine sql and instantiated at that time here). Instead the Ref Cursor must reference a cursor (query), itself, and that may be presented as a string or as the query itself that is issued against the sql engine and then the ref cursor points

  Thus, slider ref and PL/SQL cursors are different concepts, both designed to manage cursors in a slightly different way of programming. You cannot mix them.

• Change the cursor to pointer/hand

  I would like to set the cursor to an image to be a "hand" or "pointer" to indicate to the user that it can click. I read on the CursorManager static class but it seems way too much work for something so simple. Am I missing something?
  
  Shiv.

  OK, after looking a bit and ended up playing, I had.

  You must set two properties on the control of the image in order to to make it show a hand cursor. useHandCursor and buttonMode. Both have the value true to make this work.

  Too much to do and too vague to start if you ask me. All the other languages that I've programmed in and continue, it was a simple matter of something like this:
  image.cusrsor = Cursor.Pointer (pointer being a part of an enumeration.

  Same JavaScript and CSS make it simple as that and it is intuitive too :). I case prefer th eCursorManager concept to it. But I don't want to have to re - draw the cursor with shadow etc and I know that this means that if someone changed their theme the cursor will look like strange for them.

• Using the cursor to another (nested cursors) cursor objects...?

  Now, I'm pretty sure that's not possible, but as a last thought of the station, it would not hurt to ask.
  
  I have a number of fairly complex cursors in PL/SQL (all beautifully packaged upwards), which are used in a number of other different queries for reporting. Because the same cursor is reused several times in different contexts, I want set the cursor once, then use it as a subquery in the other queries. This will also help as if I place the SQL directly in other queries, then it will be necessary propagate the changes to the base query in all other queries which use - and that it will be maintained by a large team that goes forward, it would be wide open to things being missed... (not that I don't trust my colleagues or anything like that...!)
  
  So, in brief and simple terms, if I;
  
  CURSOR curDateList (pi_start_date AS, pi_end_date IN DATE)
  IS
  SELECT pi_start_date + rownum - 1 when
  FROM (select '1' sys.dual connects by level < = (pi_end_date - pi_start_date + 1));
  
  that returns a list of the dates of pi_start_date to pi_end_date, and I want to integrate in another slider like;
  
  CURSOR curEmpWork (pi_start_date AS, pi_end_date IN DATE)
  IS
  SELECT e.employee_id, dl.when, e.work_pattern
  OF e xxx.emp_work_patterns,.
  DL curDateList (pi_start_date, pi_end_date)
  WHERE dl.when = e.roster_date
  ORDER BY e.roster_date;
  
  (Needless to say that queries are much more complex and many!)
  
  I reached the required result by using the pipeline table functions that just open the first cursor and run each line, but am frequently end up using multiple nested functions to achieve and I see marked in this way, then the performance degradation that comes to nest queries within the other runs a lot faster. As a nested query is just a nested cursor, it seems that this is possible, but I'm not only have no chance - I am struggling to find something that says that it of possible or not (which made me think I am barking the wrong tree here!)
  
  Any help would be greatly appreciated.

  No, it is not possible, but have you thought of creating a view instead?