Set the "sleep"

Similar Questions

• With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  With the iPad Pro 9.3.1 running, I do find a way to set the sleep function. I sleep in about two minutes. Help

  (It sleeps)

• Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Sleep Timer Pavillion DV 7 - How do you set the timer for a different time setting?

  Hello Pidcock,

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  I understand that you want to change on your computer sleep timer. I'll be happy to answer that question for you. Now you have not specified what operating system you are using, so I guess it's the same operating system provided with your computer (Windows 7). I will provide you the HP support document: Management of power (Windows 7 and Vista) Options, which will guide you in how to set the power of your laptop. Just in case you have upgraded to Windows 8 I am also including the HP Support document: Manage the power (Windows 8) Options. This document will guide you through the same steps in Windows 8.

  I hope that I have answered your question to your satisfaction. Thanks for posting this question on the Forums of HP. Have a great day!

• How can I change the setting from sleep on the surface

  No matter what I tried I can't change the setting of sleep on my surface. Often expire after 30 seconds to be idle... any help would be appreciated.

  No matter what I tried I can't change the setting of sleep on my surface. Often expire after 30 seconds to be idle... any help would be appreciated.

  Hey there,

  From the start screen, by scanning the right to appear charms, press 'search', type 'power', press 'settings' touch 'power options', this will open a window in the office. On the left side of this window, you will see an option called 'change when the computer sleeps,' touch this, change the settings you want, touch "save changes" and you're done.

  Hope that helped,

• Satellite M70-159: how to set the APM mode on the HARD drive?

  Hello.
  I have Toshiba M70-159 and I have problem with my HARD drive. My power to drive (FUJITSU MHV2060BH) down from 2 to 5 min... I put in Toshiba Power Saver "Never."
  I now read http://www.fel.fujitsu.com/support/disk/manuals/m60_product_manual.pdf and I see maybe APM I put.
  How can I configure Mode APM?

  1.11 advanced Power Management (APM)

  The hard disk automatically switches to the mode according to energy saving the
  setting the APM mode under the inactive state.
  The APM mode can be selected with a number of sector register of ALL
  Control FEATURES (EF).
  The disk complies with the three types of modes of the APM which a command
  from the host is necessary.
  EN = 05 h: enable APM
  SC = C0h - FEh: Mode-0 Active Idle? Idle low power
  SC = 80 h - BFh: Mode-1 idle assets? Low power idle (default)
  SC = 01 h - 7Fh: Mode-2 inactive assets? Low power idling? Standby
  EN = 85 h: disable APM (Game Mode-0)
  Active Idle: The head is in a position of extreme inner disc
  Middle. (VCM Lock)
  Overview of the unit
  1-14-C141-E224
  Low power Idle: the head is unloaded the disc.
  The spindle motor.
  Standby: the motor stops.
  In Mode APM-1, which is the default APM mode, operational status moves until it
  Finally reached "low power idle."
  Table 1.7 Advanced Power Management
  APM mode
  Idle assets
  (VCM Lock)
  Idle low power
  (Unloading)
  Standby
  (Spin-off)
  Mode-0 0.2 to 1.2 s min. 15 s/o
  Mode-1 0.1 to 0.2 sec 10.0 - dry 27.5 n/a
  2 mode 0, 1-0, 2 s 10.0 - dry dry 27.5 10.0 - 40, 0
  When was the maximum period during which the hard disk waiting for orders
  exceeded:
  Mode 0: Mode shifts affection Active Active Idle in 0.2 to 1.2 and low
  Inactive power in 15 minutes.
  Mode-1: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds.
  Mode 2: Active status to Active Idle mode in 0.1 to 0.2 seconds and
  low power idle in 10.0 - 27, 5 seconds. After 10, 0-40, 0 seconds in
  Low power idle mode goes into sleep mode.
  Note:
  The default values for these settings are reflected in the values of WORD 91 of the
  Command IDENTIFIER. In addition, APM mode is initialized with the Mode-1
  (the default) to power off.
  The above mentioned is time until the transition to each mode of power based on the point
  that the reader becomes a State of waiting for order.

  How can I set Mode APM to disable EN = 85 h: disable the APM (Set Mode-0)

  Where do I put? Please help me.

  Hello

  You can use either the Toshiba Power Saver that controls also the APM mode or you will remove him this tool and then you will use the Windows power management.
  Here, you can change the settings for the APM mode.
  Unfortunately the other options to disable the APM Mode are not known to me.

• How can I turn off the sleep mode in Apple Watch the temporary?

  Guys,

  My wife is studied for his chiropractic studies and tried to use Apple Watch as a timer so that it checks the patient's pulse, but she is unable to use the watch due to the sleep mode. Plu wake screen is 70 seconds as described in settings. Is it possible that it can disable temporary screen wake up so she's doing the pulse testing?

  Justin

  Version: Watch OS 2.1

  Hi Justin

  It is not currently possible to disable the sleep of the Configuration screen. The longest time that the screen can stay awake without further interaction is 70 seconds (subject to activating first the setting you describe).

• All of a sudden, I cannot perform a system restore, cannot not to activate the 'sleep', cannot conduct an audit of the disc.

  This all started in the last 2 weeks. Have cleaned the registry with CCleaner and Wise Registry cleaner. Have scanned my system with
  AVG free, free MalwareBytes, SuperAntispyware free, Spybot Search and Destroy, Windows Defender and the free analysis tool from Microsoft. Nothing untoward was found. My computer is almost 5 years old HP Pavilion tx 2000 32 bits. Also, after a few minutes, with each new page that I opened, my chrome browser always opens a new tab and my mouse, instead of scrolling up and down, it zoomed in my window larger or smaller size.

  Hi TedDyjas,

  Thanks for posting your question in the community of Microsoft Windows.

  From descriptions of the question, it seems that you are unable to run the system restore, you can not activate the 'sleep'.

  I imagine the inconvenience that you are experiencing. I'll help you fix the problem.

   

  To help you suggest several steps to solve the problem, I would appreciate if you could answer the following question:

   

  1. you receive an error code or message?

  2. have you made any recent hardware or exchange of software on your computer before the show?

   

  There may be third-party software conflict with the computer, and to solve it, perform the steps below to correct and solve the problem.

  Method 1:

   

  Step 1:

   

  You can try to start the computer in safe mode and check if the problem persists.

  Safe mode starts Windows with a limited set of files and drivers.

  Startup programs do not work in safe mode, and only the basic drivers needed to start Windows are installed.

  Start your computer in safe mode:

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If the problem does not persist in safe mode, then follow the next step.

  Step 2:

   

  You need to perform a clean boot to prevent any third party conflicting application from interfering with your computer.

  To put the computer in a clean boot state, you must follow the steps in the article mentioned below and check with the question.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or Windows 7:
  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to start your computer in normal mode by following these steps.

  a. click on start toreduce this includes this image, type msconfig.exe in the Start Search box and press Enter.Collapse this includes this image

  If you are prompted for an administrator password or for confirmation, you must type the password or click continue.

  b. on the general tab, click the Normal startup option and then click OK.

  c. When you are prompted to restart the computer, click restart.

   

  Method 2:

   

  Scan your computer by using the Microsoft Safety Scanner by clicking Download now to check if there is no virus infected:

  http://www.microsoftsafetyscanner.com/

   

  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  I hope that the information above helps you.

  Your response is very important for us to ensure a proper resolution.

  In the future if you fall on any question relating to Windows, please do not hesitate to post your request here on Microsoft Community, we will be more than happy to help you.

• 3847 don't exit the 'sleep'

  My Dell Inspiron i5 3847 out fashion 'sleep' several times a month.  The keyboard and the mouse (USB).  So I have to power down the back, and who doesn't like Windows 10.  Most of the time based on a key or mouse click will wake this computer from sleep very well.  I guess that there are more failures when I let it go into sleep mode during the night than during the day.  The screen and the sleep of PC are set to 45 minutes.  The monitor is an Acer H236HL connected by HDMI and a WD My Passport Ultra is connected by USB3 if those made no difference.  Any suggestions to fix this?  Thank you.

  You can try this:

  1. Open Device Manager and expand the list under USB
  2. Double-click on a USB root hub, and then click the power management tab
  3. Acheck the box "allow the PC turns off... ' and click OK
  4. Repeat for all root hubs
  5. Expand the list under Interface devices in Device Manager and uncheck the box so all HID with a power management tab
  6. Quit Device Manager and open the Windows Power options screen
  7. Select the active power plan, click on the link to change settings
  8. On the next screen, click on the link for Advanced Options
  9. Look on the list left to the able suspension selective USB and SAY. Be sure to save the changes to your diet plan before leaving this screen.
  10. Reset

  See if that helps...

• How do I change the sleep timer?

  I am new to the computer age. How to change your settings for standby or hibernation in Windows 7?

  Click Start > Control Panel

  If the control panel is set to display small or large icons, go to Power Options.  If the control panel shows the categories, go to hardware and sound and then go to Power Options

  On the left are links "Choose when turn off the display" and "Change when the computer sleeps."

  Select a link and set the options as you want.  You can find parameters of hibernation under 'Change power avancΘs' and then click on the + sign next to "sleep".

• Forced shutdown Windows when set mode sleep

  Hello
  This past month my computer cannot go to sleep cause of mode when it does force stop. So, when I try to turn it on it says "windows has stopped unexpectedly" and I have to find my work. I have a windows 7 Home premium 32-bit with 3,5 of ram and a quad processor. Can someone help me?

  Hello

  1. What is the brand and model of the computer?

  2. are you aware of changes to the computer before the show?

  Method 1: I suggest you to perform troubleshooting of power utility to set the power of your computer settings and check if it works properly.

  Open the troubleshooter of power
  http://Windows.Microsoft.com/en-us/Windows7/open-the-power-Troubleshooter

  Method 2: You can also try creating or changing the power plan.

  a. power by clicking on the Start button, open the Options click on the Control Panel, clickingsystem and security, and then clicking Power Options.

  b. in the current power plan, click change plan settings.

  c. on the settings for the plan of page, click change advanced power settings.

  d. adjust the sleep options in the advanced power settings and check.

  Method 3: You can restore the default power setting by running the command from an elevated command prompt.

  Open the command prompt window by clicking the Start button, all programs, Accessories, right-click on command prompt and select run as administrator. Type the following command at the command prompt, and then press ENTER.

  Powercfg.exe - restoredefaultschemes

  Hope this information helps.

• Cannot restart or refresh my iPhone 7 from the "home" button and the sleep/wake button at the same time

  I'm having difficulty trying to restart and update my iPhone 7 using the Home button and the sleep/wake button at the same time, when I do my phone takes a screenshot of the home screen.

  Should I turn off my Touch ID?

  Basically my home button button and / standby works not together at the same time.

  You need hold the House and turn off the button for 20 seconds, until the Apple logo appears.

• Sierra crash when after the "sleep mode"

  My MacBook Pro (13-inch, mid 2012) after update of the sierra accident when, after the "sleep mode".

  I try to reset the SMC sama NVRAM but always crash.

  suggest to solve?

  Thank you

  When you say 'crash', what do you mean?

  Probably something that runs in the background. Open the black Apple at the top left. Select system, then users and groups and login items Preferences. All deleted in this window.

  You can add applications and programs back to the points of connection with a window to see what is the origin of the crash.

  You can also start the computer start-up (hold down the SHIFT key when you start) which will make the computer start with no 3rd party apps. If that solves the problems, just disable the third-party applications and add back one by one until the problem occurs again.

• Unable to set the paper size at all when using Firefox built-in PDF Viewer

  I use the built-in Firefox pdf viewer and it's fab.

  But if I try to print, I go to the preview before print and go through the layout and it is useless, because it assumes that my book is almost SQUARE, and the only options I have are portrait and landscape. I use A4 paper, like most of the British and European.

  Of course, I can't work around the preview before printing or that it ends up in the wrong settings by default.

  Adjust (default), it is only based on the width (if I set the margins to zero - it's okay), but lacks the lower half of the page because Firefox think my paper is the PLACE for a reason any.

  The only thing that works is to set the zoom to print at 60% and have tiny everthing, which is ridiculous.

  Any ideas? Is it possible to manually set the width and height of the paper?

  Thanks if anyone can help with this - my alternative is to use the Toshiba reader of PDF files, and it prints terribly to be unreadable. The print quality on Firefox is fine, if I could get to fit on paper...

  Hmm, in your screenshots, why mention the title bar of the window Yahoo mail? Is it an attachment that is somehow embedded in the message? If so, can you find a way to see it in its own tab? Sometimes with the right button > setting > Open Frame in a new tab will do, but I did not open Yahoo Mail to experiment.

• How to set the new tab to open a homepage

  After the recent update to version 44.0.1 I lost the ability to open a new tab and open the new tab homepage. Someone can help me.

  Thank you

  Do you mean when you open a new tab, you want to see your regular home page instead of the page of the new integrated tab on Firefox?

  41 of Firefox is no longer uses the browser.newtab.url setting in about: config because he was constantly attacked by malware. From 41 of Firefox, you need an add-on to change the new tab page.

  Here are a few options (I'm learning more all the time):

  • If you are already using the "Restorer of classic theme" or "Tab Mix Plus" extension: There is an option somewhere (!) in his dialogues of the parameters to select another page in the new tab.
  • If you want to use your new tab homepage: Try https://addons.mozilla.org/firefox/addon/new-tab-homepage/
  • If you want to set another page or a completely blank page: Try https://addons.mozilla.org/firefox/addon/new-tab-override/
  • If you want the cursor to move in a search box in the page: Try https://addons.mozilla.org/firefox/addon/custom-new-tab/

  Use only one of these methods at the same time, otherwise there may be conflicts and dysfunctions.

  Setting up substitute new tab and new tab custom

  After installing one of these extensions, you must use the Options page to set the new desired tab page (instead of use subject: config).

  Open the page modules using either:

  • CTRL + SHIFT + a (Mac: Cmd + shift + a)
  • "3-bar" menu button (or tools) > Add-ons

  In the left column, click Extensions. Then on the side right, find the new tab replace or custom new tab and click on the Options button. (See first screenshot attached).

  New tab Override

  Depending on the size of your screen, you may need to scroll down to enter the address in the form. (See second screenshot attached). For example:

  • (Default) page thumbnails = > subject: newtab
  • Blank tab = > subject: empty
  • Built-in Firefox homepage = > topic: welcome
  • Any other page = > full URL of the page

  Then tab or click this form field and you can test using Ctrl + t.

  Custom new tab

  It is easy to enter your favourite homepage address. If you check either of the boxes, the expansion will set the focus in the page as well, for example, the cursor will be in the Google search box. (See third screenshot attached). I had to leave Firefox and start it up again before new custom tab started working, but this may have been due to tests so many extensions back to back.

  Success?

• I want to set the default url of all new additional tabs I have open - how please?

  When I'm already browing and I choose to open a new tab opens on the Yahoo search engine, and I don't see how to change this. I want to open with google.co.uk. The first page is the default in Firefox and it works very well - it's just the extra legs that are the problem.

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem.

  • Put yourself in the DEFAULT theme: Firefox/tools > Modules > appearance
  • Do NOT click on the reset button on the startup window Mode safe
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

  You can watch the pref browser.newtab.url the topic: config page and set this pref to the URL of your preferred the new tab page.
  You can use these special pages or set the pref to the URL of your preferred the new tab page.

  • the new default tab with the tiles page is on: newtab
  • the default homepage is Subject: Home
  • to a blank page, you can use Subject: vacuum

  The pref browser.newtabpage.enabled must be set to true to use the page defined through browser.newtab.url like the new tab page.

  You can open the topic: config page via the address bar.
  You can accept the warning and click on "I'll be careful" to continue.

  • http://KB.mozillazine.org/about:config