set the time of beginning of sequence

Similar Questions

• How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point

  How can I set the time axis on my waveform table to show run time that is to say whenever I start the program I should have 0 as the starting point. I've been messing around with the without success. I'm under Labview 2012.

  Thank you!

  Townes wrote:

  I can't understand what you mean. I have no formal training with labview. It took me a long time to write the simple program that I joined. Any guidance would be greatly appreciated!

  Its pretty normal for a beginner to take the time to write code. Right-click the map of waveform > Create > property node > historical data, you will get a property node, keep this at the beginning of the code and create a constant. You can also go to the VI properties and > run and select "clear indicators when it is called.

  I recommend you to go through the basic materials of LabVIEW which will give you an understanding on the basics of bases/components of LabVIEW.

• Setting the time

  I have 4250 IDS with current signature. I use IDS - MC to configure the IDS. I want to set the time and date, but I don't see any option in IDS - MC to set the hour. How do I set time and date for IDS using ID - MC for the Eastern time zone?

  Altaf

  I don't think that the MC has a zone configuration window. If you log in the sensor CLI (admin), you can set the time zone on the sensor. Here is an example of eastern standard configuration and daylightsavings time

  Note 1: you can take the default values for most of the guides messages

  Note 2: you will be asked to reboot the sensor for the offsets of time comes into force

  #setup

  ...

  Change the system clock settings: Yes

  ...

  Change DST settings: Yes

  Recurring:, Date, or disable? [Subscription]:

  Start month [April]:

  Beginning of the week [first]:

  In the morning [sun]:

  Start time [02:00:00]:

  End of month [oct]:

  [Last] week end:

  End of day [sun]:

  End time [02:00:00]:

  [] DST zone: EDT

  Elbow [60]:

  Change the zone schedule system? [No]: Yes

  Zone [UTC]: IS

  UTC offset [0]:-300

  ...

• How to set the time that my screen stays on?

  How to set the time that my screen lights up.  I have an iPod Touch 6?

  Settings > general > auto-lock

• How to set the time between slides in a slideshow (iPhoto, el capitan)

  How to set the time to say - 5 seconds or 20 seconds - between slide show photos in iPhoto. I use el capitan.

  See the Settings button at the bottom right of the toolbar (at the bottom of the slide show). Click on it and you have a small window with two tabes, refers to all the slides, the other to the selected slide. You can make your choice

• Can I set the time on the lock screen is?

  When I turn on my iPhone (6 s), the first thing I see is my lock screen.  It only stays on for a few seconds, then disappears.  If I'm not enough fast slide my finger to the right to get to my home screen, I have re - activate my phone.  Is there a way I can set or change the time that the lock screen stays on?

  I don't know how to set the auto-lock function which turned the iPhone off after a certain period of inactivity.  It's different.  The automatic locking of setting has no effect on the amount of time that the lock screen remains lit.

  How do I set the time to stay on the lock screen?

  Have you considered simply use Touch ID?  In this way, it wouldn't even matter if you could see your lock screen.  Just push the "home" button and then tap your finger on the home button and your iPhone will unlock.

  Use the ID Touch on iPhone and iPad - Apple Support

• How to set the timer on my Satellite A660 keyboard?

  I ask here, IF hadou no to set the timer on my Satellite A660 laptop keyboard. I checked in HD utilities and found NO time setting.
  ANY help would be greatly appreciated - thanks.

  Hi, mate

  to be honest, I don't understand what you mean timer keyboard...

• F20-111: is it possible to set the time to stop the laptop?

  I have a Qosmio F20-111 and I am very qurious on the posibility to set the timer to stop the laptop, maybe I can install a special program

  Hello

  Check it please electric saver tool. Here, you can set the time for hibernation mode. It's almost the same as a power option key. You can find this option in the basic settings.

• Setting the time and time zone?

  Hello, I have a problem, try to change my time to standard time. When I change the time and time zone, they are locked. It won't let me uncheck to set the time manually. The time zone is set to Apple Americas / U.S. (site time.apple.com)

  IM El Capitan OS running on a Macbook Pro late 2011.

  Thank you, James.

  This isn't a time zone. It's the time protocol Server network that sets the time automatically. He is indifferent to the zone that can be set manually or by location.

  You need unlock the prefpane by clicking on the padlock and authentication. Then, you can adjust the settings.

• Set the time on cRIo with delay VI

  Hi all

  I want to correct both the cRio and tried to use the time VI. It gave me error 2147467263 which means "not implemented".  the error message is "node in nisyscfg.lvliband Time.vi:6150001-> put time.vi".» I don't know how to fix this error and to change the time.

  I've attached a screenshot of the program to this message, I would appreciate any ideas or suggestions.

  Best regards

  Hello imnewhere

  run the vi in my computer, then it should set the time.

  

  This may also help

  How can I configure my controllers time real CompactRIO to synchronize with the SNTP servers?

• HP 7640 set the time

  Just bought HP Envy 7640.  Initial Setup gave me twice the choice.  Both were wrong, so I chose the closest.  Now I can't understand how to set the correct time.  Tried to follow the instructions in another post for a 7610.  As I am new to HP printers, I could not understand or follow the instructions on the other post.  It says something about the integrated Web server, which means nothing to me.

  My philosophy has always been: If you can't solve a problem to ask for help.  Almost immediately after asking for help, will allow you to fix the problem yourself.

  After fumbling around, I finally found the EWS and set the time...

• Is it possible to set the time on a device in real time so that the time will persist when the device is not powered?

  It seems that you can not set the time on a device sbRIO (9606) and have always the exact time when the card is powered after not being fed for a while.  I have a product which will be independent (not connected to a network) when it is supplied by the customer.  I would like to collect data in a datalog and would like to put a timestamp somewhere so that I can understand when these data were collected.  If I can't get an exact date/time, then the next best solution would be to set up my datalogs so that I can at least understand the exact order in which they were collected.  (I think I can understand it without much problem)    Any suggestions as to best practices?

  Hey John,

  Without connected VBat time will not be preserved between periods of closure. Unfortunately for the 9605 and 9606 we have not a way to date the connector 9693 VBat.

  How much sbRIOs you plan to deploy with your system?  9623 and 9626 have a compartment for the RTC. If you haven't bought your sbRIOs already you could focus on the options of the form always match.

  If it is necessary to have retention time between stops, we would need to understand the extent of your application more.

• Cannot set the time zone of Moscow winter + 3 hours.

  Cannot set the time zone of Moscow winter + 3 hours.
  Set the time zone Minsk 3 after the GPS clock moves forward 1 hour, timezone is set back from Moscow + 4.
  It is an error of your software when you are ready to address this issue.

  Automatic deactivation date & time(Settings>Date&Time...)

• How to set the time on an officejet pro 8600

  where should I go to set the time on my office jet pro 8600

  To set the time for an Officejet Pro 8600:
  * Press the arrow to the right while on the main screen of the printer
  * Select the Setup menu
  * Go to preferences
  Superior option under the Preferences menu should be the Date and time

  I hope this helps.

• my screen saver does not start. I select a screen saver, set the time, apply and nothing. This has happened before and corrected himself. Maybe one setting in another program? ___

  I select a screen saver, set the time, apply and nothing.  This has happened before and corrected himself.  Maybe one setting in another program? It's on a laptop.

  Hello jerrylumpe

  1. If you use an old mouse, try to clean it.

  2. you can have a running process in the background that keeps XP thinking that he is busy and so the screen standby does not start.
  Go to msconfig and uncheck everything you don't need, then see if the screensaver will kick in.

  Start/run and type
  Msconfig
  Ok

  Startup tab
  Keep the page open then click on the link below. It will tell you what are all the entries and see if you can disable them or not

  http://www.SysInfo.org/STARTUPINFO.html

  Read the key at the foot of the page, then click on "Here" at the top. Use the search box to check all your entries

  Try this too
  http://www.kellys-Korner-XP.com/xp_tweaks.htm

  Line 51 left side. Click on "toggle".

  It could be that something is resetting the timer. For example, it does take much vibration to move the mouse a little, and which will reset the timer to zero. Something like that would be possible? Or a pet that walks on the keyboard?