Set the video file poster frame

Similar Questions

• When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After you have chosen a selection of clip the first clip that I post on the time line is equipped with sound. then the next

  When you open a new session and after a decline in all the video files in the content area (the sound and the video is very good). After choosing a selection of clip, the first clip that I post on the time line is equipped with sound. then the next clip, I chose (not dose issue)
  will have no sound. (but in the contact box everything its fine) Why is this?

  Why is this?

  Because you forgot to patch source audio track.

  

• I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  I am running 10.1.1 version. Is it possible to export the video at 30 frames per second instead of 60 frames per second?

  Yes.  The frame rate (and resolution) of a project is determined by the first clip set a new timeline for the project.  So put a clip known 30 fps (with the resolution you want) in a new project timeline then copy everything from your existing project in the new project.  You can then remove the first clip if you wish.

  Geoff.

• Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a file instead of .mp4 .m4v

  With the help of the first Pro CC 2014.

  Export (in the format H.264 HD 720 p 23.976 preset) and audio out separate while the video file is a .m4v instead of .mp4 file.

  Anyone know why audio and video export separately? I can't understand why. Help is very appreciated.

  Are you sure that you choose a preset of Blu - ray? This will create separate assets. Thanks for posting a screenshot of your export settings if you can - which is usually much enough quickly

  Thank you

  Jeff Pulera

  Safe Harbor computers

• When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  When I drag a file audio and video of the source on the timeline monitor, only the video file is transferred. How can I move the two files on the timeline? Thank you for your help in advance

  You must set the source patch:

  

• Why can I get only audio when I play the video files?

  I only get the audio portions when I play video files.  The video is black and white.  What is happening with mi/gal., avchd and videos posted to Web sites. YouTube, Facebook, etc.  The video files only can I play are windows media files.  Media Windows PLAYER will not play any other video files?  I have the latest updates for my video card and the adobe flash player.  Thanks for any info!  Elwood, Windows 7 64 bit, i7 980 x @333 6 hearts, 12 GB of ram DDR 1600, Radeon 5850 GPU, OCZ Vertex 3 120 GB SSD

  It is likely that the various files contain the CODEC, that are either not installed on your computer, or PrE is not able to use them.

  You list several types of files, and I urge you to first see this FAQ entry, then get one of the utilities file info, related to it, G-Spot, MediaInfo, or MediaInspector, then view the details on the different CODECS: http://forums.adobe.com/thread/440037?tstart=0

  In addition, WMP cannot play the video shows the probability of a CODEC problem.

  Or another of the great, try free media players, VLC Player, or MediaPlayer Classic HC. Both contain many useful CODECS, but they do NOT install them in the operating system.

  Good luck, and with the CODEC info, can anyone give your recommendations.

  Hunt

• Problems with the video file (wmv) path - Director Keeps restoring old road

  I am looking for assistance in obtaining a video playing live per floor in my movie once it is burned to CD.

  What I found is this work expected to use a relative path , and my film must find the video files very well.  However, I have great difficulty with this.  I was able to change the 'filename' from the video cast member to a relative path (@Video\videofilename.wmv) and the property inspector reflect this change.

  

  However, once I save, publish and check that it works, the film begins to search for the file in the original location.  What happened several times.  I changed the properties for the Member of the cast in the cast, as well as for the onstage cast member (not sure if their properties are related, so after a few troubled results, I tried to change both).  Whatever happens, the path in the file name field is back:

  

  I've even went up to remove the videos of the scene and casting, then add them again, using only the relative path in the file name field, does not.  The result is always the same: once I have save and publish again, the name of the file back to the absolute path.  To say the least, it's frustrating.

  Thank you very much in advance for your help.

  B

  The operator 'path' should be considered as the combination of characters "@:" or "@------" or "@/ ', then your path should be"@\Video\videofilename.wmv ".

  As you say, this should not give problems. If it persists, there are two options. Use Manager prepareMovie for the searchPathList and set the member.filename property before than the dialog box 'where's... ' is displayed:

  on prepareMovie
    _player.searchPathList.append(_movie.path & "Video")
    -- member("wmv").filename = "@\Video\videofilename.wmv"
  end
  

• Re: How to save the video file to a DVD-R for Equium A200

  I have the Equium A200. Someone can tell me how to save the video file to a DVD-R on my computer in order to use it later, or use it in windows movie maker and must not simply copy on another DVD-R right?

  My cursor also has disappered in the suite of windows media, that makes life quite difficult.

  Any ideas?

  Thank you.

  You mean, you want to copy the original DVD movie to HARD drive?
  Well, you can copy the contents of the entire DVD to the HARD drive. It means that you have to copy a lot of data.
  I would recommend shrinking the DVD movies using a tool called DVD shrink.
  It would decrease the data and would also copy the content to the HARD drive.

  But if you want to use these files later in windows movie maker, so you must convert these using a 3rd party tool.
  Google a bit and you should find many free applications that would help you to do this work.

  Good bye

• How to play the video file from Gigashot A40FE?

  I have 40 GB A40FE cam gigashot.

  I can't able to play the video file from this cam. no support for the folder.

  Please give me answer.
  How to play that format or I want to convert or download any player for whom?

  Hello

  Have you tried to read this file using the VLC Player?

  It is a small player and the best is that it is just for free! :)
  He plays most file types, and I think that you should test.

  See you soon

• I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop

  I can view is no longer the video files to the format AVCHD using Windows Media Player on my desktop.

  I could at some point... but now all I get is audio, no video.  The files open and work on

  my laptop that also uses Windows Media Player... but for some reason now... nadda.  Seemed

  This all started when I upgraded Windows more late service CAP and also installed Real Player.

  Help!

  Hello

  • What version of Windows are you using?

  1. it is possible that you are missing the codec to play the file or it is clashing with other codec files.

  2. the link provided below lists supported by Windows Media Player file format.
  It does not list the AVCHD or. MTS files supported file format directly:
  http://support.Microsoft.com/kb/316992

  3. yet we cannot be sure at this point that the issue is due to interference with some files.

  Method 1:
  Alternatively, you can perform a restore of the system to a previous point, when the issue was not present. The System Restore tool uses points of restore to return the system files and settings to an earlier point in time. You can use it to restore the operating system to a point in time where you have not experienced the problem.

  Note: When you use System restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  To do this, there must be a restore point from the system in which the connection was successful.

  Please refer to the below of the help links on performing a system restore.
  http://Windows.Microsoft.com/en-us/Windows7/what-is-system-restore
  http://Windows.Microsoft.com/en-us/Windows7/system-restore-frequently-asked-questions

  Method 2:
  You can determine which codec was used with a specific file; read the file in the player, if possible. When the file is playing, right-click the file in the library, and then click Properties. On thefile tab, look at the Audio codec and Video codec sections.

  Then you can uninstall any installed codec and install that you need to do the job file.

  If you have several codec for the single file to work they can clash and cause problems.

  
  You can check the link for assistance on the issue - below

  http://Windows.Microsoft.com/en-us/Windows7/codecs-frequently-asked-questions

• View thumbnail in the video files does not not in xp real player but working in windows media player files

  View thumbnail in the video files does not not in xp real player but working in windows media player HELP files!

  It might be worth a try to run the following command:

  Reach... Start button / run...

  In the box run... type or copy/paste...

  regsvr32 shmedia.dll

  (Yes, there is a space between 2 and s)
  Press on... Come in...

  You should see a dialog box stating:
  "DllRegisterServer in successful shmedia.dll".

• The video file can be published to the specified location. Check that the publishing location is still available, that there is enough free space on the disk, and then republish the movie again.

  It happened once before, but it somehow went away after I restarted my laptop. I restarted my laptop, this time, but it has not worked.

  ~*~

  OK, so I just finished put a video together. It consists of a Hypercam 2 record (which means it's a .avi file), a PNG image, text and a song (which is a WMA file).

  ~*~

  I save the file, and then click Publish Movie. Everything goes well until the last step where the video is actually published. The window made a break for a while before you receive the following message;

  ~*~

  "Cannot complete the movie publish .

  The video file cannot be published to the specified location. "Check that the publishing location is still available, that there is enough free space on the disk and then republish the movie again."

  ~*~

  I know there are a lot of free space on the drive on my laptop (it's an Inspiron 1520), and that there is nothing wrong with any of my files. I tried to change places without result. It simply doesn't get it. It would be a great help to me if someone could tell me what is the problem :)

  ~*~

  Thank you very much

  Len

  Microsoft Windows Movie Maker is not to let me publish my movies

  Hello

  I suggest you try the steps mentioned in the link given below.

  Error message when you try to publish a movie using Windows Movie Maker in Windows Vista: "cannot complete publish movie.

  http://support.Microsoft.com/kb/930435

  Additional information:

  Solve problems with publishing a movie to your computer

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-publishing-a-movie-to-your-computer

• File extension M2TS I can't open the video files transferred to my laptop from my brother.

  I can't open the video files transferred to my laptop from my brother. The CD with his camcorder lets a user / one machine, so I can't install the program that came with it.

  This is the extension M2TS, and although there are outreach programs going over there, I read on most for the DO NOT download. MS has a program or driver, or something I can use. And I need it like RIGHT NOW as I have videos that everyone in my family reunion awaits, and I leave in the morning.

  Thanks a lot if you can help...!

  Convert m2ts files in wmv format would be
  the best bet.  The following freeware can be worth a try.

  (FWIW... it's always a good idea to create a system)
  Restore point before installing software or updates)

  Free video converter Freemake
  http://www.Freemake.com/free_video_converter/
  (Windows XP/Vista/7)

• How to change the file type of the video (file format)

  How do I change the video (file format) file type? I'm trying to play the vids from my phone on my computer.

  How do I change the video (file format) file type? I'm trying to play the vids from my phone on my computer.

  You need a video converter to change your type of video file to formats supported by the media player on your computer. I suggest you convert to wmv format. It is the most reliable format type.

  Go surf the web. There are many converters FREE video that will do the job. Just enter the video converter in the search box of the browser.
  I do not make recommendations. You'll have to decide for yourself.

  t-4-2

• Problems with codec... need help to open the video file...

  Hello
   
  I tried the previous suggestions and ran the reset... no change...

  · What happens when you try to play the video file? You get the error message? Yes, error msg - windows media player cannot play the file. The player might not support the file type or does not support the codec used to compress the file.
  · What is the file format? 3GPP
  · The question is limited to this video file? Yes, all the videos copied from my cell and downloaded on PC, the problem occurs. Note all the copied images have no problems.
  · Did you do changes on the computer before the show? None.

  Any further suggestions? I fear, if I should try a codec download from the internet and that you and the measures to be taken.

  Thank you

  Dan

  ... Any further suggestions? I fear, if I should try a codec download from the internet and that you and the measures to take...

  I would recommend that you download and install K-Lite Codec pack from here.

  
  Download K-Lite Codec Pack
  

  Get either the Standard or complete package to halfway to the bottom of the page. There is a package tailor-made for 64-bit if your Windows 7 is that the flavor. The 64-bit package is not always necessary, as most of the programs are still 32-bit.