EA4500: Change the password of the router

Similar Questions

• No Wireless Connection and can not only change the router

  I have messed around with my router configuration to try to make my NAt type open and somehow messed up the Internet. I set kind of it and now I can connect to the internet if I connect directly to the router but I can't always have a wireless connection and I also can't change the router setting more? I followed the steps back to get my ip address and it used to be 192.168.1.1, but now his 192.168.1.2 I don't know what I please help.

  Hi estesblake,

  (1) do you get an error message when you try to access wireless internet?

  (2) what is the number of brand and model of your router?

  Follow the steps outlined in the article below to fix the problem of wireless network connection

  Wireless network connection problems in Windows

  http://Windows.Microsoft.com/en-us/Windows/help/wireless-network-connection-problems-in-Windows?T1=tab02

  Regarding router problem check the documentation that came with the device or contact the manufacturer of the device.

• HP4645: HP 4645 - change the router for Humax and now always invalid password

  Hello HP / person

  Please help me, I change my ADSL internet fiber and provider gave me a router Humax. However, when I tried coonect Assistant wireless via HP4645, it always show me "invalid password" this wireless I use 5 to 6 devices so I'm very sure that the password is correct.

  I tried putting the Cd and it ran however it n SSID inavailable

  Please help me before I change the internet from ADSL to internet fiber with new router it works just perfect.

  Hi @c13pan,

  Welcome to the Forums of HP Support!

  I see that you are unable to get your HP Deskjet Ink Advantage 4645 e-all-in-one printer connected to the new router. I'd be happy to help you and don't forget to come back to this thread and check "Accept as Solution", if I have successfully helped solve you the problem. If you want to say 'Thank you' to my effort to help, click on the "thumbs up" to give me a Kudos.

  I understand that this can be frustrating, we should be able to get this to work for you. Looks like the printer must hang on the old settings or trying to connect to the wrong network.

  To correct this problem, try the following steps:

  Restore the default settings network settings.

  1. press on the wireless button to access the menu of the status of wireless.

  2. press the button next to settings to access the settings menu wireless.

  3. select restore default settings.

  4 confirm the selection to restore the default values.

  Source

  • Before you reconfigure the wireless, make sure that the SSID is not hidden.
  • If you have a dual band router, rename the network 5.0 GHz and the name of the network is unique.
  • Make sure your computer is on the 2.4 GHz network when you try to reconfigure the wireless.

  To confirm you are on the same network and the password is correct, please use the printing and scanning doctor.

  HP provides a free tool called HP Print and Scan doctor to diagnose and troubleshoot printing and scanning. Download and run printing HP and doctor Scan quickly and automatically multitask resolution of known issues for this problem. When you click this link, HP Print and Scan Doctor is downloaded using the download of your Internet browser capabilities.

• change the router WEP to wpa

  How can I change my wep to a wpa key

  type 192.168.0.1 in the URL bar of your browser (if it does not, type 192.168.1.1) and click on enter. Your router wireless page will appear. Connect to your router using your user name and password that you set them when configuring the router (user name is admin, unless you changed it). The settings you change will be in the settings or wireless settings menus, but it's different for several routers, so you will need to explore the menus. teengeek.freehostingcloud.com Microsoft community contributor

• WRT54GS - problem with changing the router IP

  Here's my problem: I want to change the IP Address of the router (and subnet) to 192.168.1.1 to (for example) 192.168.28.1 (long story).  I can do it on the base of the router configuration page.

  I have a desktop with a fixed address configuration: 192.168.28.90, subnet mask 255.255.255.0, default gateway and preferred DNS server: 192.168.28.1.  Three laptops get dhcp addresses.

  Access to Internet is fine, but local communications on the local network no longer work: shared folders are not accessible, and I can not ping to one local PC to another. (But I can ping anything on the web)

  When I'm back at 192.168.1.1 all is well again.

  Someone at - it includes what is the problem?

  Thank you.

  It is most likely a problem of computer software firewall.

  To resolve the issue, reset the router to 192.168.28.1, then power cycle your network, verify that your Internet connection works on all computers.  Then go into the computer on each computer software firewall and set it to "trust", other computers on your network.

• After changing the router cannot printer to the wireless system

  Just changed router and found the printer was no longer visible said a relocation complete, got a page that asked I connected a printer/computer USB cable to continue. I do not have an advance long enough and we didn't need the first time I installed the printer so what goes wrong > I have 64 bit Windows 7 thought I maybe need a driver different, but nothing works, because I can not all facilities is

  Found the router WPS button finally (it was part of the decorative work)

  so he was able to connect in this way

  Thanks for your time and your concern

• DMZ-Link bandwidth does not change the routing table countin traffic

  Hey guys

  I'm INE laboratories dong and shoved a weird one that delivers.

  I have configured the dmz-link bandwidtha nd the extended communities to send, I get the bandwidth in the BGP routes, however the routing table does not change the proportion of traffic according to the bandwidth available link.

  Here is my configuration:

  Rack1R6 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 54.1.1.254 distance-54

  neighbor 54.1.1.254 dmzlink-bw

  neighbour 155.1.67.7 distance-300

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  No Auto-resume

  Rack1R6 (config) #.

  Rack1R6 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 54.1.1.254 0 54 I

  * > 28.119.17.0/24 54.1.1.254 0 54 I

  * > 112.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 113.0.0.0 54.1.1.254 0 0 54 50 60 I

  * > 114.0.0.0 54.1.1.254 0 0 54 I

  * > 115.0.0.0 54.1.1.254 0 0 54 I

  * > 116.0.0.0 54.1.1.254 0 0 54 I

  * > 117.0.0.0 54.1.1.254 0 0 54 I

  * > 118.0.0.0 54.1.1.254 0 0 54 I

  * > 119.0.0.0 54.1.1.254 0 0 54 I

  r > 155.1.0.0 0.0.0.0 32768 I

  Rack1R6 (config) #do sh ip bgp

  Version of BGP table is 35, local router ID is 150.1.6.6

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i28.119.17.0/24 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254                             0 54 i

  * i112.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i113.0.0.0 204.12.1.254 0 100 0 54 50 60 I

  * > 0 0 54 50 60 54.1.1.254 I

  * i114.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i115.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i116.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i117.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  * i118.0.0.0 204.12.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  *>                  54.1.1.254               0             0 54 i

  * i119.0.0.0 204.12.1.254 0 100 0 54 I

  *>                  54.1.1.254               0             0 54 i

  r i155.1.0.0 155.1.146.4 0 100 0 I

  r>                  0.0.0.0                            32768 i

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * > i205.90.31.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i220.20.3.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  * > i222.22.2.0 155.1.13.3 0 100 0 200 254?

  * 155.1.67.7 0 300 200 254?

  Rack1R6 (config) #.

  # now R4 configuration

  Rack1R4 (config) #do sh run | dry BGP

  router bgp 100

  no synchronization

  The log-neighbor BGP-changes

  BGP dmzlink-bw

  155.1.146.0 netmask 255.255.255.0

  aggregate-address 155.1.0.0 255.255.0.0 summary only

  neighbour 155.1.45.5 distance-200

  155.1.45.5 route-neighbour card GAME-54 on

  neighbour 155.1.146.1 distance-100

  155.1.146.1 neighbor send-community times

  neighbour 204.12.1.254 distance-54

  neighbor 204.12.1.254 dmzlink-bw

  No Auto-resume

  Rack1R4 (config) #.

  Rack1R4 (config) #do sh ip bgp Synt.

  Local router BGP 150.1.4.4 identifier UNDER number 100

  BGP table version is 18, table 18 main routing version

  15 entries for network using 1980 bytes of memory

  18 entries for path using 936 bytes of memory

  9/7 BGP path/bestpath attribute entered using 1512 bytes of memory

  3 entries for BGP AS-path ACCESS using 72 bytes of memory

  1 entries PMO community, using 24 bytes of memory

  0 cache entries of BGP route-map with 0 bytes of memory

  0 cache entries of filter-list BGP using 0 bytes of memory

  Bit entries in the cache field: 3 courses (up to 5) with 96 bytes of memory

  BGP using 4620 total number of bytes of memory

  Activity 102/87 BGP prefixes, 243/225, scan interval to 60 seconds

  Neighbor MsgRcvd MsgSent V AS TblVer InQ OutQ Up/Down State/PfxRcd

  155.1.45.5 4 200 8615 8640 18 0 0 07:38:02 3

  155.1.146.1 4 100 8761 8668 18 0 0 00:14:34 3

  204.12.1.254 4 54 8724 8595 18 0 0 07:38:02 10

  Rack1R4 (config) #do sh ip bgp

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  s > 155.1.146.0/24 0.0.0.0 32768 0 I

  * i205.90.31.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i220.20.3.0 155.1.13.3 0 100 0 200 254?

  *>                  155.1.45.5                             0 200 254 ?

  * i222.22.2.0 155.1.13.3 0 100 0 200 254?

  Network Next Hop path metrics LocPrf weight

  *>                  155.1.45.5                             0 200 254 ?

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  Rack1R4 (config) #do sh ip bgp neigh 155.1.146.1 opponents

  BGP table version is 18, local router ID is 150.1.4.4

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * > 28.119.16.0/24 204.12.1.254 0 0 54 I

  * > 28.119.17.0/24 204.12.1.254 0 0 54 I

  * > 112.0.0.0 204.12.1.254 0 54 50 60 I

  * > 113.0.0.0 204.12.1.254 0 54 50 60 I

  * > 114.0.0.0 204.12.1.254 0 54 I

  * > 115.0.0.0 204.12.1.254 0 54 I

  * > 116.0.0.0 204.12.1.254 0 54 I

  * > 117.0.0.0 204.12.1.254 0 54 I

  * > 118.0.0.0 204.12.1.254 0 54 I

  * > 119.0.0.0 204.12.1.254 0 54 I

  * > 155.1.0.0 0.0.0.0 32768 I

  * > 205.90.31.0 155.1.45.5 0 200 254?

  * > 220.20.3.0 155.1.45.5 0 200 254?

  * > 222.22.2.0 155.1.45.5 0 200 254?

  Total number of prefixes 14

  Rack1R4 (config) #.

  # and where is the real problem, R1

  Rack1R1(config-Router) #do sh ip bgp

  Version of BGP table is 15, local router ID is 150.1.1.1

  Status codes: deleted, cushioning d s, history of h, * valid, > best, i - internal.

  r SIDE-failure, stale S

  Source codes: i - IGP, e - EGP,? -incomplete

  Network Next Hop path metrics LocPrf weight

  * i28.119.16.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i28.119.17.0/24 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i112.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i113.0.0.0 54.1.1.254 0 100 0 54 50 60 I

  * > I 204.12.1.254 0 100 0 54 50 60 I

  * i114.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i115.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i116.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i117.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i118.0.0.0 54.1.1.254 0 100 0 54 I

  Network Next Hop path metrics LocPrf weight

  * > I 204.12.1.254 0 100 0 54 I

  * i119.0.0.0 54.1.1.254 0 100 0 54 I

  * > I 204.12.1.254 0 100 0 54 I

  * i155.1.0.0 155.1.146.6 0 100 0 I

  * > I 155.1.146.4 0 100 0 I

  * > 205.90.31.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 220.20.3.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  * > 222.22.2.0 155.1.13.3 0 200 254?

  * i 155.1.45.5 0 100 0 200 254?

  Rack1R1 (config - Router) # do sh ip bgp 112.0.0.0

  112.0.0.0/8, version 4 BGP routing table entry

  Paths: (2 available, best #2, table by default-IP-Routing-Table)

  MPIO: eBGP iBGP

  Announced for the update-groups:

  1          2

  54 50 60, (from a customer-RR)

  54.1.1.254 (metric 2560002816) of 155.1.146.6 (150.1.6.6)

  Origin, IGP, 0, 100, valid, internal multipath localpref metric.

  DMZ-Link Bw 250 KB

  54 50 60, (from a customer-RR)

  204.12.1.254 (metric 2560002816) of 155.1.146.4 (150.1.4.4)

  Origin, IGP, metric 0, localpref 100, valid, internal, multipath, best

  DMZ-Link Bw 12500 KB

  Rack1R1(config-Router) #do sh ip route 112.0.0.0

  Routing for 112.0.0.0/8 entry

  Known through 'bgp 100', 200, 0 distance metric

  54, internal type tag

  Last update of 204.12.1.254 ago 00:15:30

  Routing descriptor blocks:

  204.12.1.254, 155.1.146.4, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  * 54.1.1.254, 155.1.146.6, there is 00:15:30

  Path metric is 0, number of shares of traffic 1

  AS hop 3

  Beacon road 54

  Rack1R1 (config - Router) #.

  as you can see, the BGP process in R1 receives the correct link DMZ bw but not indeed take...

  can you please help me if I makeover anything in my setup?

  Hello

  Can you please make sure you have a value of bandwidth on ALL your BGP peering physical interfaces? And you can also include the running-config 'router bgp XXXX' out of R1 as you have not understood what we (others are). Just to make sure that you have "bgp dmzlink-bw' configured on all peerings and overall in the process - it will still show in the output of the same community if it does not work on it.

• EA4500 smartwifi: the router's external ip address

  Hi I have an EA4500 with interface smart wi - fi.

  I need the ip address provided to my router by my internet provider so I can remote desktop into my home computer using port forwarding.

  I could not find the IP address of my router.

  Under connectivity, the internal ip address is listed, but not the external ip address.

  Can someone point me in the direction of the rite.

  Thank you

  Vik

  @vikramjit.gill Hi! Instead of going to the connectivity, select troubleshooting, and then click Diagnostics. You will see your Internet IP address on this page. This is the IP address of your ISP. I hope this will help you!

• I have a HP Deskjet F4580 3 years, worked to change the router.

  I have a HP Deskjet F4580 3 years, worked well to change my router yesterday. Since then the blue wireless button flashes just power and I can't "add device" on the new network.

  All thoughts

  Replacement of your wireless router try here.

  http://www.HP.com/global/au/en/wireless/reconfiguring-system-Help3.html

• Need to change the wireless password as soon as possible.

  Hello

  I was recently sharing my WiFi with a close friend nearby but unfortunately he, or his children, were downloading music illegally therfore making me get in touch with the Charter, blah blah blah... I tried to change my password for wireless, but for some reason, I can't understand it. I would really appreciate some advice if possible. I thank you all for time and hope to hear from you soon.

  Bryan Stoner

  Hello

  The access password is in the router to verify with the support of the manufacturer of the router. Most are online
  help for this, even though setting up as new. Change the router password, even to change the SSID
  (name) and then only you should be able to open a session.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• RE1000 cannot find the router

  Hello

  I bought a couple of RD1000s at the flea market. I have a "deadspot" or two in my apartment and I was hoping to alleviate this problem.

  Updated the Firmware v1.0.02.

  Adjusted the default namespace and admin passwords.

  Configuration manual connection using WPA2/WPA mixed with band select Auto.

  They seem to be in perfect condition except neither of the RE1000s can see my wireless router!

  My router is a Netgear CG3700EMR provided by my ISP.

  I can see both of the RE1000s of my Mac and my PC, as well as signals of 2.4 and 5 Ghz Wi - Fi my router.

  When I get a list of Wi - Fi networks available on the RE1000 page, I get a list of the variable content of betweenn 6 and 11 networks available, of which none are mine. The content of the list seems to change after each update as some of the more remote routers disappear and are replaced by other distant routers. My router does not appear.

  The RE1000s can not see my router at all ranges from 2 meters to 30 meters - I checked from many different sources of energy.

  I'm a bit puzzled, so all the intelligent comments are welcome.

  Philippe

  Problem solved by trial and error.

  The router is configured as an iPhone, iPad, Android device, a Mac and a PC Win7 (Linksys WMP600N) and a Blackberry can see it. For reasons of space, I'm at Channel 13.

  However, it seems that the channel must be set to 1 initially for the RE1000 find the router.

  After setting the router to channel 1, I was able to connect the devices. Later, I changed the router to channel 8 (the current less crowded) and everything went on very well.

• How to change the security settings on a wireless network

  I would change the existing network security settings to WPA2, AES, or at least from TKIP AES.

  I am familiar with access via browser to the router and how to change the settings of the router.

  My question is how to make this as painless as possible for the network.  Step by step would be great

  First of all, I guess I have to change the settings of the router using the computer running Easy Link Advisor?

  Do I then have to disconnect/reconnect this computer?

  Do I have to unplug all the other computers and then sign in again with the update settings?

  The change of security settings affect my print server?  If so, I put up from scratch in ELA?

  For the record, I have a WRT 300N and the print server is a 54g.

  Anyone who reads this can also focus on recent news.  Maybe not a big deal, but a WPA/TKIP vulnerabilities has been identified.

  Thanks in advance to anyone who responds.

  If you change the router's wireless security settings, it will affect all devices that connect wireless to the router. To change the settings, simply set until you want on the web interface of the router. Save the settings. You need not link to that Advisor. Direct access to the web interface of the router is sufficient and preferable.

  All devices configured to connect to this network should ask if they connect more. It depends on type of what you had before. If you have not used WPA2 or WPA before having to ask for the password. If you used the WPA or WPA2 with the same password that they cannot even ask the password. How it works in detail with a specific wireless device depends on the device and the software you use. Some devices may require you to first remove the network wireless in the list of "preferred networks" and then reconnect.

  Check the manual of the print server how to configure for the new security settings. You should be able to reconfigure the print server through a web interface. First, it is probably best to change the settings on the print server and then make the change on the router. Otherwise, you may have a hard time, connection to the print server to make the change. In addition, depending on how old the print server is that it cannot even support WPA2 and AES.

• WRT110 - How to change the MTU setting?

  I have trouble finding a way to change the router's MTU setting. I got a new modem (former fizzled), and now my internet works fine. However, when I connect my Xbox 360 to the internet, it indicates that the MTU setting is incorrect and to go to the router setup Web page to change it.

  Anyone know how to find this page?

  So far all I've found is this site that gives a link to the linksys router, but the link takes me someplace completely different.

  Understand the part. Now it asks me for a user name and password to view the site.

  Help?

  Call the technical support; problem solved!

  It turns out that my specific router is outdated, so I can't access the MTU settings.

  T_T

• Printer Hp6700: unable to connect to the router wireless D - Link DI-514 when SSID Broadcast is set to no.

  HP6700 printer: unable to connect to the router wireless D - Link DI-514 when the router Broadcast SSID is set to no. My MAC laptop and HP laptop both work with the set SSID on no. If I change the router Wireless SSID Broadcast is YES, then the printer HP6700 can connect to the wireless router. I set up the printer it saying that the SSID and password have been, the same as both of my laptops, but it connects ever, unless I have change the router to broadcast the SSID. Help!

  Have you tried to update the firmware on the DI-514?

  You can also try to set a static IP address on the printer, and then assign the printer to the list of DHCP static in the interface of the router.
  To give a static IP address to your printer:
  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS. It's Google DNS. You can choose a different external DNS if you wish.
  -Click 'apply '.
  Now, stop the router and printer, start the router, wait, and then start printing.

  After that you remove and re - add the printer to your Mac.

  Show support by clicking on the blue Kudos star in the post that solved your problem. Doing so will help the other members of the forum their solutions also.

• Reconnect the printer to the router

  I have a Photosmart C4385 and recently had to reset my Linksys router with a new password.  Since I did it, my printer stopped working because of the new security settings.  How it is possible to reconnect my printer?

  Thank you!

  Hello

  If you have changed the router security key, you must also enter this new key in the printer so that it can connect to your wireless network without as before.  If you are having problems the link below will help you.

  http://support.HP.com/us-en/document/c02037530

  Best wishes

  DP - K