set up wireless

Similar Questions

• I'm trying to set up wireless.

  I'm going through my cable and he can not know

  Hi dennisseverson,
   
  -What version of the operating system are you using?
  -What happens when you try to set the wireless connection? You receive an error message? If Yes, indicate the same.
   
  As you did not mention the version of the operating system you are using, I have included the link to an article that is applicable for Windows 7 that you may find useful. Check if this helps you.
  Setting up a wireless network
   

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless.

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  loudford73 wrote:

  Lost my power cord for HP Laserjet P1102W usb and I want to set up wireless. (Instructions say I need cable to do).  How can I set up wireless without buying a new usb cable

  Hello

  If the instructions that you need a cable then you need a cable. On several printers now, you don't need USB cable for Setup (that's why many boxes do not have) and you can run the installation on your computer or a button on the printer.

  Kind regards.

• Cannot set up wireless Motocast

  I just got my Droid Razr yesterday. I could connect to my PC (windows XP) via USB and transfer songs. But I can not configure Motocast wireless, however. Everytime I try, it checks for a wireless connection, and then goes to a screen Motocast wireless set. He's sitting there for a few seconds, then outputs only programs.

  I read through the forum and based on some other recommendations that I saw there, I've uninstalled Java and went on java.com and downloaded the latest version. I have turned off my Windows Firewall and stopped protection in real time on my Microsoft Security Essentials. I also uninstalled the program Motocast, which was first loaded from my phone and uploaded Motocast to mymotocast.com.

  I am at a loss. What else can I try?

  Well, I decided before I'm that drastic, I need to check the updates of Microsoft, it's been a while, there were 73 to install! Yikes! but after installing the updates, I was able to get through the Setup process and can now access my PC via the Razr.

  Thanks for your help.

• Trying to set up wireless for HP Deskjet 3054 A! Help, please!

  I'm trying to set up the connection for my HP 3054 A wireless to my computer and the router so I can print wireless.  I had an old HP printer implemented and that Wi - Fi was very well but then I got a new modem from century link and the wireless was completely messed up.

  I use a MacBook Pro using 10.9.2 CD software is obsolete and only works on 10.5 and 10.6 then please do not mention following the instructions of the software.  The software "seems" to have downloaded the update to the Apple software, BUT I do not have any folder of HP or any installation assistant that I can find to help.

  My modem is an ActionTec PK5000 and has a WPS button near the bottom.  I tried to connect using the WPS button and all I get is "Error WPS" about 1/2 way through.  All I get is a blue light flashing for a wireless connection on the printer.  I'm so confused because under my wifi options, it lists "HP-Setup-87-Deskjet-3050A-J611" as a connection option?

  Ugh.

  I spent way too much time on this and thought that someone here would have some suggestions.

  Thank you!

  SOLUTION *.

  Please NOTE: I am running OS 10.9.2 on a Macbook Pro using an Actiontec Qwest/Qwest PK5000 modem.  It is the solution that worked for me.  If you have a different operating system or brand of modem or a computer - I can't talk about what will work for you.

  1. you will connect the printer via what is called a Web server integrated (EWS) - not through WPS, is not using a PIN or a push button, what are the options of the printer.

  2. make sure that your printer is reset by default.  To do this - press the button on the printer control panel wireless and navigate to "restore to the factory settings."

  3. then - make sure your modem is on and your ethernet cable is connected the modem to the computer.

  4. then - you'll want to navigate through your browser to this page http://h10025.www1.hp.com/ewfrf/wc/softwareCategory?product=5115807&lc=en&cc=us&dlc=en&lang=en&cc=us

  and select your operating system like 10.8 and press Next.  "Driver-product installation software" press the sign + and download the package on your computer.  I don't think it would work as it says 10.8 and 10.9 not but it works very well in the end.

  5. open the packaging of the HP software for the HP utility, and his assistant installation etc.

  6. run the installer of HP.

  7. before you "add a printer" make sure you that you logged into your wifi connections for a connection which identifies (or should) in your wifi networks as something like "HP-Setup-XX-Deskjet 3050 a J611" not the normal wifi connection you can use.

  8. now 'add printer '.  The computer should find the device and it should show as "Hello multifunction" rather than "USB" (which is what I kept getting).

  9. now - go to the HP utility page and you will see the different sections of information about your device.

  10. find the section "Printer - additional parameters.

  11. then you should see a box that says ' the selected printer can be configured using a built-in web server.  Discover patterns and information on the printer by pressing the button below. »

  12. press the button.

  13. This will connect you to the embedded online Web server.

  14. When you're on the embedded - Web server you will see several tabs at the top of the page.  Go to the tab that says 'network '.

  15 then the coast - find the wireless configuration wizard.  Who will guide you through connecting to the wifi network you use and configure your printer.

  16. After you run the installation wizard, you should be able to unplug your ethernet cable, go back to your wifi connected and normal that you use your printer up and everything should be good.

  It worked for me and I hope this saves people a lot of time dressing and that this will work for you as well.

  Good luck.

   

• set up wireless zero control

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  1. Ideas: iam not very experinced with a pc so I could really use some help I'm trying to set up a wireless connection but when I try to connect to a connection of filtration it does not connect, and when I try to repair the connection he says cannot repair because wireless is not zero control all this started about a week ago When I called my internet provider and during the sentence they hard shotting me connected something reset it was something like winstock 32/config or something and since then, even though I try to hang upwards from my dsn don't box still no connection

  Hello

  If your computer or your wireless network card came with its own wireless network software, follow these steps:

  1. click on start and run, type ncpa.cpl, and then click OK.

  2. click on network connections.

  3. in the network connections, select your wireless connection, and then click on change settings of this connection.

  4. on the wireless networks tab, click to select the use Windows to configure my wireless settings check box.

  To start the automatic Wireless Configuration service, follow these steps:

  1.
  Click Start, click Run, type %SystemRoot%\system32\services.msc/s and then click OK.
   
  2.
  Double-click Wireless Zero Configuration.
   
  3.
  In the startup type list, click Automatic, and then click on apply.
   
  4.
  In the service status area, click Start, and then click OK

  Another article to look for troubleshooting:
  313242 KB - how to fix wireless network connections in Windows XP
  http://support.Microsoft.com/kb/313242

• Can't set up wireless 'Wireless Zero Configuration is missing'

  Original title: Missing Wireless Zero Configuration

  I use Windows XP service pack 3. I used to use an ethernet cable to connect to the internet. I have just bought a wireless adapter and can't make it work. The error that says:-Question WZC failed! I don't seem to have the file on my PC Wireless Auto Configuration. Any ideas how to get it please? Thank you

  Hello

  Try the following and see if it helps.

  Method 1:

  Check if the Wireless Auto-Configuration service is enabled.

  a. Click Start, type services.msc, press on enter and then click Services.
  b. double-click the automatic Wireless Configuration service.
  c. Click Start to start the service.
  d. click on the general tab, verify that the service has not been disabled in the Startup Type box. If Yes, click Automatic to have it start when you start the computer.

  Method 2:

  a. click the Start button and then click Control Panel.
  b. If you are in category view, then click on the connection icon network and Internet, and then on the network connections icon. If you are in Classic view, double-click the network connections icon.
  (c) in the network, LAN or Internet Connections window high speed, select the icon to connect to the Local network. In the menu bar, click on file and select Properties, or simply right-click on the Local area connection icon and select properties from the context menu).
  d. in the Properties window of connection of LAN, on the general tab, click install.
  e. in the window select the component Type of the network under "The type of network component you want to install, click" click to select the icon of the Service, and then click the Add button.
  f. in the Select Network Service window, click on the diskette provided button, click the Browse button.
  g. in the window locate file, navigate to C:\Windows\Inf folder (this is a hidden folder). Click to select NETWZC. INF, and then click the Open button.
  h. in the window to install it from the disc, click on the OK button.
  i. in the window select Network Service, in the Network Service box, select Microsoft as the manufacturer, and then click Wireless Auto Configuration.
  j. click on the OK button.

  Method 3:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2: http://support.microsoft.com/kb/870702

  More information see also:

  To set up automatic wireless network configuration: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/wlan_client_configure.mspx?mfr=true

  Wireless Zero Configuration Reference: http://msdn.microsoft.com/en-us/library/windows/desktop/ms706593(v=vs.85).aspx

• After that I did Disk Defragmenter to C I lost my files and setting up wireless for my windows

  After I did Disk Defragmenter to C I lost some information and files for my windows then my wireless does not detect all wireless networks its lost all the operating parameters of my adapter wireless (Atheros AR5005G Wireless Network Adapter) I need to get files and setting of cos its all lost and I couldn't update my antivirus (Microsoft Security Essentials) 0 x 80240022

  Hi jtm 8888.

  Try these methods in the order shown:

  Method 1: As a first step, update the network adapter driver by visiting the manufacturer's Web site.

  You can also follow this step to do the same thing:

  a. right click on my computer, click Manage, then Device Manager.

  b. double-click the type of device you want to update or change.

  c. right click on the device driver specific, you want to update or change.

  d. click set to update driver to open the Hardware Update Wizard. Follow the instructions in the wizard.

  For more information, see:

  How to manage devices in Windows XP

  Method 2: Follow the steps listed in this article and check if this may help you:

  How to troubleshoot wireless network connections in Windows XP Service Pack 2

  Note: The steps listed in this article are applicable to the other version of Windows XP as well service packs.

  Method 3: For problems with Microsoft Security Essentials, see:

  http://www.Microsoft.com/en-us/security_essentials/support/cf5220bd-3da8-4694-ac42-f5396ef5ff0b.aspx

• Cannot set up wireless internet connection on my HP Pavilion new-1065dx dm4, please help

  Hi, I got the HP Pavilion dm4-1064dx for my birthday and I formatted and installed Windows 7 Enterprise Edition x 64. I installed the sound, graphics and chipset drivers from the Web site. But I can't get my wifi to work again. I tried to off the drivers wireless for my laptop for downloads & drivers but nothing has worked. I tried to find HP Wireless Assistant, but I was not abe to find and I do not know if my problem that will be solved. If anyone knows what I can do to fix this please.

  -Thank you

  Hello, I downloaded the HP Wireless Assistant you posted, and when I go to run it I get this message "this version of HP Wireless Assistant is not supported on this model. I also entered my Services and have started and that the startup type for Wired AutoConfig and WLAN autoconfiguration service is set to automatic. When I go in Control Panel-> Internet-> manage wireless networks and network I click on 'Add' and then a box appears and I click on manually create a network profile and then this is what happens. He sayd it in the box "Windows cannot detect wireless network interfaces and.

  ---------EDIT----------

  I solved the problem. I went into the bios and seems that my wireless card is a Broadcom as the FCC ID presented themselves as QDS-BRCM1050... that Google identified as a Broadcom BCM94313HMG2L. However, HP does not have the correct drivers for this card on the site. Here is the link for the correct driver http://h10025.www1.hp.com/ewfrf/wc/s...s&lc=en&dlc=en. I also installed the Intel Management Engine Interface (MEI) driver and now my wireless works perfectly.

  Mark as resolved, please

• Setting up wireless after the installation of Mountain Lion

  I have recently upgraded to Mountain Lion on my Mac Book Pro and am trying to set my HP Photosmart C4780 to print wireless via a USB cable.  I don't want to use WPS.  The problem is that the drivers were supposedly downloaded with Lion mountain and all of my research on the web, I agree that if I implement wireless using a USB cable, I need to do when installing the printer software.  When you try this a few days ago, the instructions I found said first to check for software updates by using the Apple app store.  I did and I got a message saying "no updates available".  After many hours trying to solve my problem, I finally gave up.  Today, however, while I was working on my laptop, I have message came up saying that the drivers for my printer HP were available.  I pressed the button install.  I tried to set up my printer with no luck.  Can someone give me some suggestions on what do I do please?  Thanks in advance.

  In fact I already had on WPA.  I solved the problem and your initial solution was certainly helpful.  The problem was that by using the "Reset default" button does not seem to reset it.  I actually had to reset by a method that that is on this link.  http://h30434.www3.HP.com/T5/printer-networking-and-wireless/can-t-see-the-hpsetup-network-on-my-MacBook-Pro-on-a-C4780/TD-p/193900  I appreciate your help.  He led me in the right direction.

  Thank you!

• set up wireless printer

  I run windows 7 & have home network set up. Ive been able to put my daughters laptop for wireless printing. (she has windows 7 too) but my son who has xp laptop will not connect to wireless printer?

  Is it because of the different system to the main computer (mine)? or have I missed something which is probably simple?

  I hope someone can help.

  Thank you

  Load you the software of the printer on the XP machine and choose Network Installation?

  Is there a firewall on your security system?  Disable it.

• How to set up wireless I have usb 3 is

  I need to set up the Wi - Fi computer, I bought all sorts of usb adacepters nonithing I got linksey before it was working fine

  Hello

  I suggest you to refer to the links and check if it helps to put in place a wireless network.

  Setting up a wireless network 

  Wireless networking: frequently asked questions 

  Setting up a network home

  Wireless and wired network problems

  Let us know the results. We will be happy to help you further.

• Setting up wireless

  I recently moved into my place and need to set up a new wireless network connection.  I have a Photosmart C4780.  I've tried the HP wireless printing Center and the advice they give do not help me.  It said to insert my software disc and I should get a welcome back screen and to reconfigure the network settings, but when I put in my CD it takes me to a screen on the printer that is already done.  I have a Mac so I don't know if it's important or not, but I'm out of ideas.  Any help would be appreciated.  Thank you!

  The software on the CD is not at all for 10.6.  You must remove this way:

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Hold down the Ctrl and Opt Cmd and click on uninstall
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Now run a software update.

  Then, reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Click on it...

  Finally, download and run the software from here.

  Scan from preview or Capture of Image apps. Scan from the front panel of the printer does not work yet.

• HP OfficeJet 4500 Wireless - cannot set up wireless (UDP Port 427 related issue)

  I just bought a HP Officejet 4500 Wireless printer... The problem is setting up this printer wireless function is therefore not the case!

  Whenever I go through the set up I get this response:

  "Your computer is unable to communicate with your printer at 192.168.0.8. This can be the result of firewall software. If you use firewall software, make sure that the 427 UDP port is unlocked for the incoming and outgoing traffic. Your PC cannot communicate with your printer at address 192.168.0.8. Check all cable connections. Make sure the printer and the PC and the router are powered on and connected to the network. »

  How can I fix it?

  I am running

  OS - Windows 7

  Windows Firewall, packet of Defender etc.

  My only additional security is a free package of AVG.

  Please help as he rolls me and my dad nuts!

  :(

  Hello

  Method 1:

  I suggest you to go through the steps in the link and check it out.

  Install a printer

  http://Windows.Microsoft.com/en-us/Windows7/install-a-printer

  Method 2:

  Disable the firewall and check.

  The Windows Firewall is enabled by default in this version of Windows. To make sure that it has not been disabled, follow these steps:

  a. open the Windows Firewall by clicking the Start button, then Control Panel. In the search box, type firewall and then click Windows Firewall.

  b. in the left pane, click turn on or off Windows Firewall. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  c. under each network location type, click on disable Windows Firewall and then click OK. We recommend that you turn on the firewall for all network location types.

  For more information, visit the following link:

  http://Windows.Microsoft.com/en-us/Windows7/Understanding-Windows-Firewall-settings

  Important: Don't forget to turn on the firewall once the diagnosis is made.

  Method 3:

  NETWORK PRINTING CONFIGURATION PAGE

  
  a. Press setup, then scroll to the bottom and look for network.
  b. press OK on the network, it will give you the first option 'display network settings '.
  c. press OK on it, and it will give you the first option "print network configuration page."
  d. choose who and press OK. It will display the network configuration page. This document, you will be able to see the IP address of the printer

  Print a network configuration page and note the IP address of the printer.

  a. now open the printer folder and check the icon of the printer with a checkmark on it, and the bed ready state.
  b. right-click on the printer icon and select Properties.
  c. select ports tab and click on configure port and enter the same IP address and try to print that would settle the matter.

  See also:

  Manuals for HP Officejet 4500 Wireless all-in-One Printer - G510n

  http://h10025.www1.HP.com/ewfrf/wc/manualCategory?cc=us&LC=en&DLC=en&document=&product=3986399

  Hope this helps and keep us posted.