Setting up wireless after the installation of Mountain Lion

Similar Questions

• After the update to mountain lion, our hp d110 prints well but the scanner hangs every time.

  We have recently upgraded mini Mac to our daughter to Mountain Lion and then his D110 prints fine as always, the scanner no longer works. If try to analyse the HP utility on your computer or directly from the printer itself, she receives an error message indicating that the scanner broke down suddenly. This never happened before Mac OS update. She started to software update, which found new software of HP printer, so she downloaded and installed, but the problem persists. Can you please sheds light on this problem? Thank you very much!

  If you are using Snow Leopard or Lion and you have the HP software before Snow Leopard (either from a CD that is not marked as compatible with the 10.6/10.7 or you recently upgraded to Snow Leopard or Lion and had the software HP on your Mac before you upgrade - even if you made a standard from the old software uninstaller or installed new software on top of it) , you must uninstall the software by using the "scrubber":

  Go to Applications/Hewlett Packard / click Uninstall HP
  Click on continue
  Highlight your device in the left pane
  Press and hold Ctrl + Alt + Cmd keys on the keyboard at the same time as you click on uninstall< this="" is="" the="" scrubber="" option,="" there="" is="" no="" button="" labeled="">
  There will be a pop up that asks if you are sure you want to uninstall all hp software. (At this point, if you continue, all HP printers you have installed will need to be reinstalled)
  Click on continue and let it finish

  Download and install this: http://support.apple.com/kb/DL907

  Restart your Mac.

  Now reset the printing system:

  -Sys Prefs, Print & Fax
  -Right (control) click inside the box that lists your printers and select Reset Printing System.
  WARNING - This will remove ALL your printers!
  -Select the sign + to add again. Search for the printer, select it, and wait until the button 'Add' becomes available. Until it clicks.

• Working Group stopped after the installation of the new wireless router

  My working group stopped working after the installation of the new wireless router.  Router was switched were to move from DSL to fiber optic.

  I have a very simple home with two laptops working group, the two are connected with a wireless router.  A PC is running XP with the updates and service packs; the other PC is Windows 7 Home premium.  This working group was running without problems for a few years.  The Working Group has been used to share files between two laptops.  Internet access was through the DSL wireless router and print was with a wireless printer, without going through the working group.

  I had my DSL set out to free fiber optic last week, which meant that a new wireless router has been installed by my local phone company.  Internet works fine; wireless printer works.  The working group no longer works.  When I try to connect from XP to Win7 and I click on mode workgroup computers, I get this message:

  WorkGroupName is not accessible. You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.

  The network path was not found.

  I tried to create a new working group, the new name for the same workgroup on both machines, but this did not help.  Working groups are supposed to be simple; This seems to be a problem on the new router - telco tech support says that nothing is stuck on the router. I don't believe them.

  What version of XP you use (Home or Pro)?

  Can you access the Win 7 a XP computer?

  You have identical accounts, passwords on both computers?

  If all that was done was to change routers without making any changes on the computers, the most likely cause of the problem is a third party (other than Windows) firewall on at least one of the computers.  Being by default, a router automatically assigns IP addresses to computers on your local network.  Different brands of routers, but use different address ranges.  For example, Cisco/Linksys routers typically use the 192.168 form addresses. 1.1 with 192.168. 1. 254, while the D-Link routers typically use 192.168.1 to 192.168.0.0. 254.  A firewall configured to allow only the first IP range blocks communication to the scope of the latter.

  So... What is the name and version of your anti-virus program?
  What other security software is installed?

  On every laptop computer, open a command prompt window
  for XP: start > run > cmd > OK
  for Win 7: type cmd.exe in the search box and press enter
  In the black command prompt window, type the following command and press enter
  ipconfig

  Please provide the values for the following for the adapter wireless of each computer
  IP (XP)
  IPv4 address (Win 7)
  Default gateway

• After the installation of 8500 a909n printer works wireless for a few months and then quit?

  Wireless worked for two months after the installation of replacement printer, then he stipped works, but still compatible with USB. Technical support phone could not operate either. What should do?

  Nothing that I said. The printer was a replacement for one that would not connect at all, then the tech team India talking my client through cannecting it then a few months later it stop responding wireless but worked hard when the USB is connected. I was able to remedy through the convenience store a couple of times and selecting the difficulty of choosing the default printer for the correct choice rather than the fax machine. I chose HP officejet (network). Thank you for your time.

• Satellite L555 - 10K - FN keys do not work after the installation of Windows 10

  I installed 10 64-bit Windows (original was Windows 7 64-Bit)

  My FN keys do not work after the installation of Windows 10.

  There is no possibility of a screen-Switch, and the brightness setting and activate Touchpad...
  Do you know any help

  Hello

  I think that your model of laptop is not possible to Win10.
  Check it please https://forum.toshiba.eu/showthread...mation-website

• Want to 700-414: on board his party after the installation of Sound Blaster Audigy Fx card

  I installed a Sound Blaster Audigy Fx to perform digital communication with my ham radio equipment. The original IDT ports do not work after the installation of the SB. The IDT does not appear in Deives Manager. I tried loading the IDT drivers but not compatible message and download failed.  I did it on other HP computers I've owned without problem.

  Thank you for any help you can give me.

  LarryC4

  Hello:

  See if your BIOS has an embedded audio location.

  If so, it can automatically able to off when you installed the add-in on the sound card.

  Check the options you have for setting the audio embedded.

  If it is on Auto or disabled, change it to "Enabled", save the setting where you made the change, and again when you go out.

  The sound should then work on both devices.

  And if the sound card works with the integrated audio system setting to enabled, then change your Auto if aboard was off.

• XP does not start after the installation of avira. Blue screen: STOP: 0 x 00000024 (0 x 00190203, 0 x 87174270, 0xc0000102, 0x00000000)

  Original title: xp does not start after the installation of avira

  I have a HP Slimline s7410
  XP Home Edition SP3
  I had Norton free with Comcast, but since I have no more Comcast became Norton expired. So I uninstalled Norton and installed the free version of Avira, he scanned the computer and it was clean. I went to reboot and now it does not start.
  I have a cd/dvd drive of work.
  I don't have an XP bootable installation CD

  My system worked well until: I installed the free version of Avira

  Whenever I select one on the XP advanced options options menu start, it goes into a boot loop.
  I turn off the auto reboot system failure although it seems only work once, as the next time he's trying to start up it goes into the boot loop.

  Here's what my BSOD looks like:

  Disable or uninstall any anti-virus, disk defragmentation or backup utilities. Check the configuration of your hard drive and check the updated drivers. Run CHKDSK /F to check for hard drive corruption, and then restart your computer.

  Technical information:
  STOP: 0 X 00000024 (0 X 00190203, 0 X 87174270, 0XC0000102, 0X00000000)

  Any help is greatly appreciated! :)

  My first suggestion is to do a system restore at this time point.

  second suggestion is to keep your external drive connected to the pc at all times.  only detach when necessary.   of course, it would be better to install a second hard drive in the computer instead.   in any case, keep your personal files out of the system disk is a wise thing to do.   You can also download and store files for free on the Microsoft Skydrive site.

  third suggestion is to keep your system set upward through executing a check disk and Defrag at least once a month.   Basically, you can open the Explorer and right-click on the drive letter.  then select Properties, and on the Tools tab, you will have the opportunity to run the disk check.  then reboot and do a Defrag.   where this disk check fails, then you will need to run it to the drive via a bootable cd prompt.

  Interestingly, I don't know if the bootable cd that you made you allows to run the disk check.

  so my suggestion is to do a series of tests using your cd bootable your computer works.  see if you can actually run a chkdsk/r at the moment with them.    If Yes, then if your constant worries are having bad sectors on the hard disk, chkdsk/r will identify and mark so windows will jump on them.    in any case, see if your boot at the moment media can run a check disk at all, and let me know.

  fifth proposal is to install "microsoft security essentials" like your anti virus program.  even if you have run ubantu, it is not likely to have been an infected copy.   anti - are most critical virus for windows and not not so much for ubantu or linux is because windows is a system of world class operations.    the people who make the virus deliberately their engineer for the windows operating system.   If, however, ubantu and linux have been just as popular as Windows, virus engineers would make infections for the o.s. too.     Although they no doubt, attacks are more frequent for the windows os.

• Try to load Quick time. All goes well until I get "administrator has set policies that prohibit the installation of this program.

  original title: rules of the administrator

  Try to load Quick time.  All goes well until I get "administrator has set policies that prohibit the installation of this program.

  I am the system administrator, logged as such, can't find a way to change these policies of 'administratoer' to allow me to download and install a program that I want to install!

  Hi J1walters,

  ·        The computer is connected to a domain network?

  ·        Which edition of Windows vista is installed on the computer?

  ·        You are able to install other programs outside of Quicktime?

  However, you can try the steps below and check if it helps to install Quick time.

  Method 1

  a. open the location of the downloaded program.

  b. right click on Setup.exe or install icon.

  c. click the run as Administrator option.

  Check if the program is installed.

  Method 2

  Try to temporarily disable control user account (UAC) on the computer and try to install the program and check if he moved very well. Subsequently re-enable the UAC settings after installing the program.

  Access the link below to see how to enable and disable the UAC settings.

  http://Windows.Microsoft.com/en-us/Windows7/turn-user-account-control-on-or-off

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Photosmart Premium C310: Printer stops after the installation of Ecaptain

  After the installation of Ecaptain, I was not able to print on my C310. When I send the page for the priner it reset my printer (asif you turned it off and back on again) my scaner works very well. I do every thing wireless & it worked fine until I installed Ecaptain

  Welcome to the HP community @scottland,

  I saw your post on the printing problem you encounter when you print from your Mac running 10.11, to your printer Photosmart C310. I have a few suggestions below for you. When you are finished, please let me know the result and we can go from there if necessary.

  First try to make copies of the front of the printer, if the work of copies successfully, try these steps below.

  1. Reset the printing system
  2. Restart the Mac.
  3. Follow this guide: Printers HP - install Mac printer driver using Apple Software Update
  4. In addition, to download this driver: HP v3.0 for OS X printer drivers
  5. Try to print the edition of text and other applications.

  I hope to hear from you.

  Testify of my answer by pressing the thumb in the air below and hit the "accept as Solution" button, if I have you helped a resolution!

• Remote Desktop disappeared after the installation of SP1?

  my remote desktop option disappeared from "Remote Settings" after the installation of sp1 on windows 7
  What can be the problem and how can I solve this problem?
  There is no problems during installation of the service pack

  Click Start, type allow remote access, and then click this option to set up.

• After the installation of Sierra, websites follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  After the installation of Sierra, Web sites started to follow me like crazy!  This has not happened before.  Why this is happening and what can I do to stop it?

  What are your privacy settings in Safari preferences.

  

• Computers on the local network does not show up after the installation of macOS Sierra

  Shared on my LAN Macs make their appearance is more after the installation of macOS Sierra. See the attached servers is checked in the preferences of the Finder and the computers appear in the list of DHCP clients on the router. I can see these computers to each other. Sharing is disabled on the computer of the Sierra. Any ideas?

  Thank you!

  p.s. I can not even 'go' to the IP address of these computers.

  Correction: I can afp: / and vnc: / to IP addresses (and so far as a temporary solution, I assigned permanent IP addresses in the router on all computers on the local network). Once I afp: on a local computer, it appears on the side bar of the Finder under shared devices, well I saw several times it appears and then disappears. Nothing has changed on the network since the installation of Sierra.

• When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  When I turn off my IPad wifi also turns off after the installation of IOS10. What is the solution?

  Hello. Do you mean "Turn off" or "sleep"? Your iPad there cell phones, or is it only WiFi?

• can not start after the installation of 10 Windows via bootcamp OSX

  Hello, I need help.

  I tried to install 10 Windows via bootcamp, and I did it successfully with no problems. However, after the installation, I restarted my computer, hold down the option key and tried to boot into OS X, but it won't work. It would be a symbol that boot lead me to windows 10!

  all solutions? I do not have a backup of my files under OSX, I lose my files?

  NOTE: when I formatted the partition for windows, he said not bootcamp next to him, but it is clear that the partition that I had to format, it is the same size that I decided to make Windows when I was in bootcamp in OSX + it was empty at 100%.

  UPDATE 1: so I managed to get into the recovery of the internet and deleted the partition that had the windows and install OSX Marverix instead (temporarily) also, I fixed the hard drive MACINTOSH HD, but now I can't boot it at all when I press the option button during the priming of the mac. all solutions?

• Can't stop after the installation of El Capitan?

  Can't stop my Mac 2013 after the installation of El Capitan

  Hello

  Use the power button (must hold until the Mac turns off)

  Restart key CMD + ALT + P + R at the same time until you have heard of at least two start Bongs

  How to reset the NVRAM on your Mac - Apple Support

  Then, restart normally to see that stop / restart work.

  

  21:11 Wednesday. May 25, 2016

   iMac 2.5 Ghz i5 2011 (El Capitan)
   G4/1GhzDual MDD (Leopard 10.5.8)
   MacBookPro (Snow Leopard 10.6.8) 2 GB
   Mac OS X (10.6.8).
   iPhone and iPad (2)