set width to 100% photo

Similar Questions

• Setting widget to 100% width Horizontal Menu does not work

  Hello, I'm trying to put a widget Menu Horizontal width of 100% within the Muse so it extends on the browser and it seems very well while I'm the edit in Muse, but when I try to view them on any browser, I get a shorter menu, floating to the left of the screen. Anyone know what could be the problem?

  As you can see in the attached screenshots, #1 is the point of view Adobe Muse, width of the menu is being proportional to the limit of the browser view, and the width setting clearly shows as '100% '. Screenshot #2, is the exported site looked on Google Chrome, with a small floating menu to the left.

  I searched for an answer for days, but can't find anyone with a similar problem. Any ideas would be greatly appreciated!

  (I have an ongoing project with this problem, he holds, I just redid it on a new clean to replicate the problem and get the screenshots you see here)

  Thank you!

  

  Hello

  By default, this Menu cannot be used as 100%.

  You can use accordion or any composition for the creation of menu.

  Thank you

  Sanjit

• How to synchronize an exhibition of over 100 photos at the same time?

  How to synchronize an exhibition of over 100 photos at the same time?

  Hi Stephens,

  Please see the following article for the purposes of setting through multiple images: develop module in Photoshop Lightroom options

  Let me know if it helps.

  Kind regards

  Tanuj

• width of 100% does not, help please?

  

  I hope that this picture will help to show the problem I have, I will paste the code I up this just in case it is not readable in the picture also.

  I'm working in Dreamweaver CM³ (updates) on a 64-bit Windows 7 platform.  I built a dozen web sites in dreamweaver, so I'm not an expert, but I'm not either totally distraught.  I did what I'm trying to do on other sites, I'm completely stumped on what I'm doing wrong here.  Any help is appreciated!

  So, it's the intro!  Here's what I'm trying to do:

  I want three background divs that are stacked on each other, with three of them covering 100% of the screen, regardless of the size of the screen (have not implemented for media queries yet go smaller, right now just trying to put it so circles fill all the screen sizes)

  If the top bar is the Tan, then the central bar is dark brown, and the lower bar is yellowish.  At the beginning I did not apply any width of 'body', but I tried to set it to 100% as well.  Each of the three background divs have been added then, and all three were set at 100%, with an image in the background (for texture and color) set to repeat everywhere.

  No matter what I try, the three bars appear to have a limit of about 740 pixels width.  It is not a setting I've ever created, and I started the page as an html page empty - not any model.  I can't find which requires this setting width on these items.

  Here's the weird thing... it really works on a big screen - the bars go all the way through... it's on small screens (my test of fifteen inches, my iphone, the ipad screen monitor) that the background is not going anywhere!

  The image in the header (all images are just an image) is 1280 pixels.

  I'm sure someone will point me to something that makes me slap my forehead in total embarrassment, but I would gladly take the humiliation of being able to move forward on this project!  Help?

  Thank you

  Michelle

  I did something like this for a client project (view source to see the code):

  http://ALT-Web.com/test/LHS-test.html

  Nancy O.
  

• Should I delete the 100 photos that I moved to Photos before transferring my entire iPhoto library of Photos?

  To test and try the Photos, I moved about 100 photos in my iPhoto photo library I could try - editing, creating albums of pictures & calendars, etc. Should I delete these photos and photo projects before transferring my entire iPhoto (several GB) library in pictures? You will appreciate any help on this.

  Probably - since it is not possible to merge libraries if you do not remove the library test and you simply migrate iPhoto library, you will have two libraries - one with everything you have migrated and a test library with 100 photos ≅ inside

  LN

• How to quickly get 100 + photos from iPhone in pictures on iMac with the download speed very low broadband?

  Hi all

  I have an iPhone 6 Plus running iOS 9.3.1 and a retina iMac running OSX El Capitan 10.1.4.  I use iCloud photo library and I like the idea of having all the pictures synced across all devices.  This works well for one or two odd photos I take here and there.

  I have just been on vacation and taken 100 + photos with my iPhone and want to create an album of photo printed on my iMac, but the problem I am facing is that it takes so long to get the pictures on pictures on my iMac.

  My download speed high speed is very low - on 0.3Mbit / s, so the photos are always download to iCloud from my iPhone now, and I guess it will be another day or two to complete.

  Is it possible to get the photos from my iPhone to the iMac more quickly without creating duplicates or spoil my library?

  It's so frustrating to have to wait 5 days after her return from vacation before you can start making a photo album.

  Thanks for any help,

  Kind regards

  Ben

  You can connect the phone with USB and import or use iTunes sync or Capture of Image - this can cause a problem with duplicates

  And of course, you can stop by a store StarBucks, Apple (or other WiFi hotspot with good service) and complete quickly

  LN

• Router Wifi Smart AC1750 cannot set the full 100 WAN port

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  jjbraunius wrote:

  I connect to a static IP address.

  After putting in the IP (static IP) settings the router does not receive speeds defined by internet provider (Logix Communications).

  After consultation with Logix, told me that the WAN should be set to 'Full 100' and I could not find this setting on the device.

  From now instead of a 50mbps down I get 10 Mbps download and upload 50mbps, so I guess the current WAN settings are 'Auto' on the AC1750 router WAN and cannot be changed?

  So now I'm getting data collisions and slower than expected internet.

  I need to know if it's fixable or to return this product for refund. I've updated the firmware for more later, still no dice.

  I confirmed that my internet provider has no problem with a much older Linksys router with WAN set to 'Full 100'.
  Thank you.

  Just a heads-up... No domestic router vendors provide ports that you configure manually, they use all the settings of auto-negotiation. So, your ISP will have to adjust their speed of port auto, or provide you a taking router support port speed settings...

• How can I place photos in muse that clicking, shows a widening - more than 100 photos!

  I have pictures of tissue to high resolution that must be shown as thumbnails and clicking on it shows the example of wholesale.

  What I have to do a page for each of them.

  I ' ts more than 100 photos.

  Thanks for a reply...

  That's what the slide show / jQuery widgets off the bat. Feel free to browse other widgets Gallery on the respective repositories of widget Muse.

  Mylenium

• How can I make the width of 100% of previous buttons and next slide show?

  I just added a basic slideshow in the header of my site. I put the slideshow width of 100% but when I add the previous buttons and depending on whether they are not 100% width and do not appear on the edges of the slideshow when previewing the site. How can I get around this?

  You could leave it pinned one add an opacity scroll arrows each.

  

• Panel of legend of width of 100% on the slideshow fullscreen

  I use the slideshow widget "full screen" on a Web site that I design. I am also wanting to display subtitles in a variety of color. All this is perfect. However, I want the legend Panel to run at 100% width through the browser. To make the width of 100% of the legend group is not given. Is it possible to do?

  Thank you

  You can try to stretch the fabric of legend on the page as it should cover page as well large enough to display full-screen in different screen sizes.

  Thank you

  Sanjit

• width of 100% when you use the menu widget?

  Hello Muse Forum,

  I insert a horizontal menu widget in a composition of muse and clicking the '100% ' at the top to make it 100% on the drawing page.  On the drawing page, it seems good and fills the width of the composition.  When I saw in a browser, however, it is left-aligned and does not fill the width of 100%.  Any ideas on how to make this functional?

  Thanks a ton-

  Hi Chupamirtodorado,

  Engineering is aware of this problem and they are investigating the possibilities to fix in future updates.

  Kind regards

  Akshay

• Center a DIV inside a DIV with width of 100%?

  OK, I'm new.

  Is it possible to have a DIV that got a width of 100%, so the background image still spans the screen

  & put another DIV inside this DIV, which will be centered in the browser window

  & then have other div inside the centered div I position?

  I'm sure it's very simple, but I can't make it work.

  All advice is appreciated.

  Thanks in advance.

  Give the div a width and left/right margins auto internal, in your CSS.  It will be centered within its container, regardless of, for example,.

  {#inner}

  Width: 960px;

  Auto margin: 0;

  }

  ...

  ...

  DIV 'outside' will have a default 100% width.  "Indoor" div will be centered inside the div 'outside' by a 960px width.

  Murray

• Sets the ToolTip widget to the width of 100% is not possible?

  This is quite annoying, because I put my navigation bar in a ToolTip. And I want to be both hideable and browserfilling (in width).
  Everyone knows about this problem? And maybe a solution / workaround for it?

  Thanks in advance!

  Since your navigation is pinned, you could just arbitrarily large, and he won't have a horizontal scroll bar appears.

• Photosmart HP 6520 printer: hp photosmart 6520 cannot set print at 100% scale/size

  What CD jewel box impression label width and higth suddenly became smaller. It works perfectly until recently. Have uninstalled and reinstalled the printer and drivers, but I am unable to find how re set the scale to 100%. in this hp6520 Photosmart printer.

  Any help would be appreciated: very happy smiley:

  After watching your @dlddemonscreenshots, I see that you use the HPDD896C (HP Photosmart 6520 series), it is a driver not driver HP class.

  I suggest all first to remove this driver and add the printer again. In fact, I suggest to use the following steps to remove the printer from the device and printers and the driver from the properties of the server.

  1. in the folder "devices and printers".

  2. choose "print server properties.

  • Win XP - with no printer selected, click 'File' then 'server properties '.
  • Windows Vista - with no printer selected, press 'Alt' and then click 'file' then 'server properties '.
  • Windows 7/8, 8.1 and 10 - select any printer in the "Devices and printers" folder and click on "Print server properties" above.

  3. click on the "Drivers" tab at the top of the window "properties of the print server.

  4. choose the printer that you want to uninstall, and then click 'remove '.

  5. choose "Remove driver only.

  6. the next screen will give a warning, letting you know that the removal of the driver package will remove it from the system. Click 'Yes' to say are you sure you want to do.

  If documents are stuck in the spooler to print, you see an error, cancel all documents waiting in the print queue or try restart the spooler to print, and then try to delete the driver from 'Print server properties' again. If she will not always remove the sachet, restart the computer and the printer should correct this error "in use" and allow the driver to be removed.

  • If him you continue to get an "in use" message followed the steps in the document here. The specified printer driver is currently in use

  Once the driver is then deleted, open start > all programs > HP folder > folder printer > HP Setup and software (or the icon of the printer).  The installation screen and the software opens and you can click on connect a new printer.

  Once you have added the HP driver, try to print a label again and let me know the result. In addition, you may need to change ' borderless printing: Print with border ' borderless Print.

  Let me know how it goes.

• How to the center stage of the width to 100% in a browser?

  I created a web page edge that I intend to concentrate in the web browser. If I keep the scene fixed-width (960 px) so I can center it in the browser with the following in the compositionReady of the stage event:

  $("#Stage").css ("margin", "auto");

  However, I would like to create a tiled background, for which I use the following in the compositionReady of the stage event:

  $("#Stage").css ('background-image', 'url (images/[email protected])', 'background-repeat', "re peat");

  If I keep the scene to width fixed so I don't see the tiled background because the scene is full of objects and of the tiled background does not extend beyond 0 and 960px. If I do the step width 100% then everything becomes left-aligned, but I do not see the tiled background (to the right objects in the scene).

  I tried to think intelligently to position everything compared to a transparent element that has its property set to 100% width, but nothing helped.

  Does anyone know how to make sure everything is positioned by the middle of the stage while retaining ownership of course 100% width?

  You can delete the lines with cover.