Setting advanced Configurations for a host

Similar Questions

• set the configuration of appeal vi for node reference vi call

  As noted in the title someone knows how to set the configuration of appeal vi (load with the appellants, charging for each call, load and store on first convocation) for a vi dynamically loaded via call by reference node?

  Thank you.

  CBR is irrelevant in the present case, since he already receives a VI reference.

  If you use the primitive opening VI refers to open this reference, then the VI will be charged the first time you call the primitive.

  If the VI leaves no memory (and you do not configure it on the way home), subsequent calls to the prim OVR returns the reference to the first VI you have opened. This is equivalent to the load and keep it.

  If you close and reopen the VI reference, it is equivalent to recharge.

  If you use a static reference to the VI, it is equivalent to the load with the appellants.

  Personally, I have all my default subVIs charge with the appellants.

• How to set the color for a particular column in the table in advance?

  How can we set the color for a particular column in advance table based on a few feteched of vo in process request query parameter?

  Hello

  Reference http://oraclearea51.com/blog/dynamically-color-the-rows-in-an-oa-framework-advanced-table.html

  and prev thread. Can color us the lines in the column of a table

  It will be useful.

  Kind regards
  GYAN

• Not enough resources to meet the level of failover configured for vSphere HA

  I have a cluster of vSphere based 5.0 based on ESXi 5 knots 2.

  When I try to start a virtual machine, I get an error saying that there is "insufficient resources to meet the level of failover configured for vSphere HA.

  If I turn off an another VM the problem disappears and I can turn on my VM.

  If I try to turn on the virtual machine, I have already turned off, I get the error again.

  It seems obvious that there is a lack resources or some setting is misconfigured, but even after reading the forums and manuals, I am unable to locate the critical resource or parameter that is not correct.

  Based on my experience or vSphere server and ESXi servers are overloaded.

  I have an another similar cluster of hosting a larger number of virtual machines with no similar problem.

  This performance counter and this setting should check to identify the bottleneck?

  Concerning

  Marius

  To check reservations for virtual machines, I would select the Cluster in your vCenter inventory, then select the resources"" tab.  Which displays the child objects of the bunch (VMs, Resource Pools, vApps).  There you can watch settings of CPU resources and memory.  You'll want to watch the column of "Reserves".

  To find the size of the slot and places available, look at the tab "Summary" of your cluster.  There is a tile marked "vSphere HA.  In this mosaic, there will be a link for "Advanced Runtime Info" which will open a new window with the location information.

  When the Admission AP policy is set to "Number of failures of host cluster will tolerate", HA has a very pessimistic view of your resources, since it must be able to handle all the possibilities.

  Another option would be to change the admission control strategy in settings of Cluster HA to "percentage of resources reserved for failover.  It reserves a part of the resources for use by HA in the case of a failover, rather than trying to calculate the size of the individual virtual machines.  With a 2 cluster nodes, I think it a relatively safe bet to set these values to 50%, as your worst case scenario HA would be losing a single host on 2.

• No writable calendars are configured for invitations

  A few weeks ago I created the lightning (with the great help of the participants to the forum of TB) so that when I get an e-mail meeting invitations, I could accept, and they show up on my Google Calendar. A week ago, it stopped working.

  When I receive an invitation, there is no button to accept. Instead, there is a notice that says "no writable calendars are configured for invitations, check the properties of calendar.

  I made sure that Google calendar is present and selected in the tab of the Flash. I checked the calendar properties, and the email address where I receive invitations to meetings (my work email) is set as the e-mail address in the Properties dialog box. And the checkbox is enabled to turn on the calendar.

  Thanks in advance, does anyone have suggestions to get TB/Lightning to work as it did before? That is to be accepted invitations to meetings and automatically add them to my calendar?

  Thank you!

  Well, you can then mark your message as 'Solution' for the topic?
  Thank you.

• Why Dell has paralyzed the Panel advanced configuration options of power on the venue Pro 8?

  

  Reference paralyzed Dell Control Panel advanced configuration options of power on the venue Pro 8.

  Dell must provide a patch restores full power plan setting up advanced features of Windows.

  Adding a new default Dell Windows power plan doesn't bother me, but they must not paralyze the Panel Windows distribution, power options, or remove the standard Windows power management.

  That has something to do with the sleep settings connected / configuration Microsoft / Dell are doing on these units. It is the same for versions place 11 MS Pro. units of vPro are different because no standby connected supports. With Eve logged onto the available settings are limited to what would not interfere with it. If you would change settings (e.g., SSD or Wifi Powermanagement Disabled) issues as sleep function in the process of disappearance and others. Microsoft also has requirements to be connected certified standby.
  Again, not 100% sure if it's MS or Dell do but my guess would be Microsoft because I saw the same thing with different units.
  If you turn off the connected Eve all Windows power plans are displayed and all the advanced features of power are available.

  Use the command Regedit and change the following:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Power
  Change the value for the key CsEnabled from 1 to 0 and reboot.
  1 means connected off standby active and 0.
  Try it and see if it solves your problem.

  BTW: by disabling the connected standby battery also will show the time remaining not only the percentage of battery life. :-)

• Change STP UME in RSTP mode on two stacked powerconnect 6224 configured for iSCSI during normal operation

  Hello

  I'll do a fw upgrade during normal operation on a stack of 6224 circulating BPMH, I am currently aware of recommendations Dells run RSTP on switches configured for iSCSI traffic connected to Equallogic SAN.

  I intend to set up another pile with two 6224 to failover and then perform the upgrade on the stack of "old." My question is if it's possible to run BPMH on the 'old' stack RSTP executing on the new stack when LAG is configured between the two batteries?

  Another option would be if it is possible to reconfigure the 'old' UME to RSTP stack without interruption between the hosts and the SAN first?

  Guidance on this subject would be greatly appreciated

  Cree

  Multiple Spanning Tree Protocol is based on RSTP and is backward compatible with

  RSTP and STP. So, you should be able to run BPMH on the old and RSTP on the new.

• CPL configuration for the handling of source on VCS - E

  Hi all

  When we tried to have a video call with an external company on the VCS - E, the address IP of CUCM appear in the distant field rather end when making external calls.

  It occurs because the SIP URI field on the sx device interface has completed our IP CUCM ( [email protected]/ * /)

  We are discussing with the TAC engineer, this problem can be solved by making one of these options below

  • 1-) field of sets for the CUCM so the field will not appear the IP address.

  • 2-) save endpoint on the VCS.

  • 3-) script on CUCM to change the SIP header and standardization for more details you can check out the link below:

  • 4-) - write scripts CPL on the VCS.

  • According to above choice, the only way to solve this problem for us applies a CPL
  • as much as I did research it is also not possible to change the source with the CPL on VCS - E. is it good?

  anyone can share me a CPL configuration for this manipulation? What I would do is this show get [email protected] / * / instead of [email protected] / * / address.

  [email protected]/ * / > [email protected] / * /

  our topology is device SX > CUCM > VCS - C > VCS-E > Internet

  VCS version is X8.7.1

  I would send me a CPL config for it.

  Thanks in advance

  Halit

  Can you provide a copy of your rules of research of VCS and a search for the call history failed.

• Devices configured for authentication under ACS

  Hi friends,

  Would like to know how many devices can be configured for authentication under ACS version 5.6.0.22 (Cisco Secure Network Server 3415).

  I'm not able to find the same everywhere.

  Concerning

  JN

  Hello

  It depends on the license that you install on the ACS 5.6.

  All deployments of 5.6 ACS supports customers AAA 100 000, 10,000 network, 300,000 users and 150 000 host device groups. 5.6 ACS collector server log can handle 2 million records per day and 750 messages per second for stress sent by the various nodes of ACS in the deployment on the server of log collector.

  Please visit this link:

  http://www.Cisco.com/c/en/us/TD/docs/net_mgmt/cisco_secure_access_contro...

  With the Base license, a Cisco Secure ACS 5.6 appliance or virtual machine software can support the deployment of up to 500 devices of access network (DNA) such as routers and switches. These are not authentication, authorization and accounting clients (AAA). The number of network devices is based on the number of unique IP addresses that are configured. The limit of 500-device is not a limit for each individual device or the instance, but a limit of scale that applies to a set of instances of Cisco Secure ACS (primary and secondary instances) that are configured for replication.

  The optional add-on of large deployment license allows deployment to support over 500 network devices. Only one major deployment license is required by the deployment because it is shared by all instances.

  Please visit this link:

  http://www.Cisco.com/c/en/us/products/collateral/security/secure-access-...

  Kind regards

  Aditya

  Please evaluate the useful messages.

• who can help me with "insufficient resources to meet the level of failover configured for vSphere HA.

  Hello world

  We tried to gif a 14GB of ram and make server complete a booking for her.
  This is a server for the exams and the vendor told us to do.

  I can't any more then 5500MB reservation on it, when I anymore that I get
  "Insufficient resources to meet the level of failover configured for vSphere HA.

  We have:

  2 X 5.1 ESXi hosts
  Each host has
  2 x processors (8 Cores each) with HT active.
  255,75 GB of Ram

  vSphere HA has been activated.
  Admission control policy is enabled and that the ability to failover is 1 host.

  What is the problem here?

  Thank you
  Ernst.

  
  

  Admission control policy is all about to give you the kind of guarantee that if the host failure happens then there will be enough resources to perform the successful failover.

  in simple terms, it comes to reserve the resources of failover.

  I would recommend going through the notion of vSphere HA, reduced control policy the following document.

  https://pubs.VMware.com/vSphere-60/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-60-availability-Guide.PDF

  From the Page number 22, the details that you need to study is given. Focus especially on part calculations Slot size of it.

  in your case you HA vSphere with number of failure of host to tolerate as admission control strategy defined.

  This means system will calculate CPU and memory slots out of the resources in your cluster, and the total number of units, it will keep some resources like reserved for failover, and others will be available to be used. It all depends on how much failure of hosts that you want to tolerate.

  now in your case, if you try to increase booking one of the virtual machine, which will then affect the number of locations in your environment, and so reserved ability to failover is violated, the system will not let you do what you want to do. As the energy on a virtual machine, or growing booking a powered VM etc..

  If you find that you have enough resources in your cluster and due to some virtual machines with very large cpu or memory reservation, number of places is less than you can still manage the settings some advanced in vSphere HA configuration, but I strongly recommend, try to take the help of someone who has done it before.

  also try to go through other admission control strategies which are explained in the document for more inputs.

• vSAN 5.5 U2 - Flash Cache error reading configuration ' reason: an error occurred during the configuration of the host.

  Hosts: DL360 G6, dual quad core, 64 GB of RAM

  Discs: 3 SAS 10K rpm and 2 SSD Spidles.

  I am trying to set up one of the hosts of Read Cache Flash but I get the desciptive never so much and the defenseless error message...

  "Configuration on disk/vmfs/device/disks/naa. < longguid > has failed. "Reason: an error occurred during the configuration of the host.

  I hope that there is a log file I can verify for a more profound description of this lame error message.

  Can someone tell me where I can check on this error?

  Thank you

  Oh. k. so, it is the function of Read Cache (vFRC) Flash of vSphere and nothing to do with VSAN

  check the diaries which is throwing this error.

  ESP: /var/log/hostd.log and log/var/log/vmkernel of corresponding calendar. This will show what is happening here

  You can check the following

  one.

  Check if SSD LUNS are not used / no other partition

  # partedUtil getptbl/vmfs/devices/drives.

  b.

  Also check that the SSD lun on that host are local and eligible for the vflash

  List of devices # esxcli storage vflash

  Thank you

• Invalid configuration for the device 3

  Hi all

  I have set up a lab nested with three hosts esxi and two warehouses of data connected with the Microsoft iscsi target server. I know nested vm is not supported, but I'm trying to implement this workshop because I support a real VMware environment and I wish I could test some things before I break anything, so it's important. I get this error when you try to create a virtual machine "invalid configuration for the device 3.  Someone knows how can I know where is the problem?

  Thank you

  I think I can find the answer, it seems that it could be a windows problem causing data corruption. Somehow I created a VM but get all kinds of error trying to create an another VM.  Iscsi targets set up using windows server 2012 and it seems that there is a fix from Microsoft below which deals with corruption LUNs in windows 2012.  I have not yet tested, but this seems to be the right direction. http://support.Microsoft.com/kb/2908783

• LACP Configuration for Distributed Switch - vSphere 5.5

  I'm trying to set up the switch distributed in a new lab, but I have a question on how to properly configure the port offsets.

  If I have a collection of servers, each with two uplinks to a physical switch, how to properly configure the LACP lag? All ports on all of the servers are part of the same GAL, or should I create a different OFFSET for each new host?

  For example:

  Lets assume 16 servers. I create a single GAL on the DSwitch, mapping of all physical links 32 rising at the same OFFSET, then replicate the physical switch configuration? Or should I create 16 different gal, one for each pair of uplinks on each host server?

  It seems strange to me that I should set up all servers on the same SHIFT, containing the uplinks for different physical host computers.

  Aaron, looks like you got it. You can think of the LAG configuration on the switch distributed as a profile of the EEG applied to each host. The physical switch upstream is configured with an OFFSET for each host.

• The total size of slot in Cluster HA includes all available memory for all hosts resources

  Hello

  So I a 7 host with 1 host cluster that is running a different generation of the Intel processor, EVC is enabled, and the hosts are running and were broadcast with happiness for months.  This host is also more physical RAM installed than the others.

  A project has worked to upgrade to ESXi 4.1 vSphere 4.0 hosts; five of the hosts have been successfully upgraded (when I say up to level, they have been rebuilt) a few months back, then for some reason, the project was put on hold so far.  So there are two hosts, including the strange which need to be modernised. Currently, I am unable to put any host in Maintenance Mode to start the reconstruction because it would cause the cluster to violate the level of failover for HA (see attachment).  When I checked the info HA Advanced Runtime for the Cluster there are only 46 pitches in total for the Cluster but 61 used locations. The size of the slot is 4255 MB (see attachment)

  I did some calculations to determine the size of the slot based on memory reserves and the total available RAM in hosts:

  Six hosts have 32758 MB of RAM and the host only has 49142 MB installed.

  49142 / 4255 = 11.5 slots
  32758 / 4255 = 7.8 * 6 hosts = 46.2 slots

  Total slots = 7.8 + 11.5 = 57.7

  The 46 slots calculated for 6 guests with 32758 MB of RAM suggests that it is only taking into account 6 guests with the same hardware configuration and not the seventh army, nobody thinks that this may be the case and have all the answers to why?  Can someone explain why when vSPhere working on the available slots is not taking into account the memory in this seventh host.

  Also, if to the failover cluster violation prompt when I try to put a host in Maintenance Mode, I say 'Yes' to continue violating the constraints, will be the fact that he believes there are 61 used locations allow the machine virtual vmotioned on other host successfully or not?

  Any help is very appreciated.

  Thank you

  As mentioned more high read my deepdive HA that she will explain how does admission control. In short, he takes the worst cases into account, which is the host with the most of the 'slots' can fail and evade this amount of homes in total.

  Duncan

  Yellow - Bricks.com

  vSphere 5 clusters Deepdive - eBook | Paper

• syslog not configured for persistent storage

  I'm under ESXi 4.0.0 261974 on one server HP Blade BL35p. installed fine and everything works OK apart if I try to access the console of the host. I get the following message "* SySlog is not configured for persistent storage"

  I looked at the Syslog settings under software/advanced settings and all is the default value for the local and remote. The only thing listed is port 514, which I believe is default. I have 3 virtual machines running on the local disk and 2 computer virtual running on an iSCSI target. Anyone know how I can get in the console of the host?

  Take a look at this article: http://kb.vmware.com/kb/1016621

  Rick Blythe

  Social media specialist

  VMware Inc.

  http://Twitter.com/vmwarecares