Setting Maximum graphic scale - with several Axes

Similar Questions

• problem with several graph XY axes

  Hallo,

  I'm tracing different variables in the same plot with several axes. I have the following problem (see attachment)

  the y axis secondary on the right side of the plot has a large area of him and one of the other secondary axis falls right above others. I tried it in the two labview 8.2 and 8.5 with the same results.

  any ideas?

  Thank you in advance,

  Thodoros

  Try the following movements:

  Right-click-> popup menu-> advanced-> reset scale layout

• Set the Images to scale with the width of the browser

  This appears to have just broken on my Site and I can't understand why?

  I thought that if I put an image of "scale to fill" then drag the image to the border of the page margin. Then the image would make the scale with the size of the browser.

  I had to work, and then it stops suddenly. I use Muse 7.1? Current? Any help?

  When I update my page and I adapt the browser upward I see white margins on both sides of the page - that is not what I want.

  Help!

  J

  I thought about it.

  I thought that if the rectangle box was outside of the margin of the page then it would be 100% width.

  You must line up exactly with the margin of page until you see "100% width.

  Thank you

• "Graph - Simple" change issues to include several axes

  I'm changing the workspace "Graph - Simple" object to allow several axes. However, I was do unexpected behavior and I can't find a way to restore the configuration when the next load.

  1. Is there a way I can use the "Custom Data" variant in the Item.Data cluster to store the configuration?
  
  
  2. If not, is there another way I can do this work within VeriStand without having to re - develop a full graphical object (based on the free label template) just to add this feature?

  I am currently using VeriStand 2014, but I can be updated until 2015, if there is a new feature that would help.

  Thank you!

  You're very close to having the right answer, but what you call won't work, unfortunately. Overall, it would be nice to put data in the custom as attributes of variant data field, as long as you crush all VeriStand attributes can be expected otherwise. Even if you do this, however, there is no way to save this copy of the cluster of the top-level VI item data. I can't in any way you can get this to work.

  However, you do have to start from scratch. It is an available add-on here called Multi-Y chart with channels calculated. It has multiple scales are natively, but this is a graph open source with a superset of the features in the chart - simple. Here you could probably change to have two or more axes and find a good way of saving data so that it persists on the next load.

  I did not write this control and never used personally, but it might be a more open alternative to watch before thinking to start over from scratch.

• Creating a DVD with several file format of files/best project for export (PE13)

  Hello! I first 13 (just improved 10) elements and trying to figure out the best way to save my movie on DVD. There are at least two different project files (the film, shock and eventually a video "making of") that I want to put on the same DVD with a menu. A couple of years, trying to do this with first Elements 10, I could not get it to work and had to use a separate DVD menu software. I can do that again, if I need to, but the software I used was lost, so I thought I would check to see if it can be done first before going to buy it again.

  If I can't do it in first, I need advice on the best format to save project files to burn to DVD later. I'm a novice, and most of these sizes looks like gibberish to me! I had problems in the past (a few years ago) with a black border appears around the film, after he was saved, reducing the size of the movie, and I'm hoping to avoid that...

  The film is about 1 1/2 hrs long

  The blooper reel is about 17 minutes

  If there is more info to help answer my questions I'll be happy to find it!

  alsyarn

  Thank you for the important information for troubleshooting your Premiere Elements burn on DVD-VIDEO to DVD disc so that it presents throughout without black borders.

  Open the first elements 13/13.1 to his Expert workspace, go to file Menu/New/Project and set the project preset manually to

  NTSC

  DV widescreen

  Do follow the following order

  • Open the project in the workspace Expert and go to file menu/new project and change the settings.
  • In the settings, set the project preset to NTSC/DV widescreen. OK to get out of there.
  • In the dialog box new project opens, rename the project and make sure you have a checkmark next to the "Force selected setting on this project." OK to get out of there.
  • In the Expert workspace, import your media source by using Add Media / choice.

  Import your Source 3 (720 x 480 widescreen display 16:9) - which should occupy all the space area monitor Edit which is a space of DV widescreen size.

  Import your Source 1 (1920 x 1080 16:9)-that must fill the space of the monitor Edit once the scale is automatically just to fill the space of the Edit monitor.

  Import your Source 2 (720 x 480 which is what is because it has a format of 1.0 pixels)-that does not fit properly. Balance this video in Edit area monitor to enter space monitor without black borders.

  It is unclear why the project 720 p settings have been set for this instead of NTSC DV widescreen. But please implement your project as described above, then export as suggested.

  I have suggested above based on destination DVD VIDEO to DVD disc. When you have a montage with several formats, you set an adjustment everything with scaling in the monitor area space Edit put in place by the predefined project and major. General guideline - the project preset should correspond to the properties of the media source... and with more than one type of format, you define major and if adapt everything with scaling if you don't want black borders.

  Another tip... When you want to scale width and height separately in edit box monitor, first go to applied effects tab/Applied effects Palette/panel of the selected clip expanded Motion and remove the box keep the Proportions.

  Please consider. And then we'll try to condense all that into a workflow that will work for you.

  Thank you.

  RTA

• Shortcut for the new window with several tabs

  Is it possible to have a shortcut on the desktop to launch a new window with several tabs? For example - home page is set to "www.google.com", but the shortcut opens new window with tabs "www.cnn.com" and "www.youtube.com".

  Then far,.../firefox.exe-nouveau-fenetre followed by the two URL in quotes will open two new windows. Entry - new-window "www.cnn.com" - new-tab 'www.youtube.com' will open two new windows if no instance of firefox is open, but if another window is already open, youtube will add a tab to the already open window, rather than the new window with cnn.com

  In reply to myself... withdrawal-order new window (and-new-tab), now it works.

  Looks like I'm too complicated it.

  shortened final was "C:\Program Files (x 86) \Mozilla ' 'url1'"url2.

• How do I set a reminder that reminds several times per day

  How to set a reminder that reminds several times a day as three times for the same drug? is this possible?

  No, not with the native application of reminders. You can see the app store, however. You might also consider to use the alarm in the clock application.

• HP ENVY BEATS EDITION 23xt: graphics card with Beats Edition 23xt want to switch?

  Hello

  I was wondering if somehow I could replace my current Intel graphics card with NVIDIA GeForce card. I am a player a bit PC and did not like the preformance of my card Intel HD 4600. I've been setting up with her for almost a year, but it was a little annoying to play games at 20 fps and low graphics, always with a lag.

  Kind regards

  UnfurledHarbor

  Sailing full.

  Sorry, but.

  Integrated video cards such as your Intel HD 4600 Graphics Chipsets are integrated into the motherboard of the system and use processor in the system (CPU) and memory to create graphics.

  REO

• Functions defined by the user with several parameters

  I set features three following user using "Define."

  UF1 takes a single patameter;

  UF2 takes two parameters;

  and UFX takes two parameters - with the second is 'X' in the definition.

  

  Œuvres F1.  F2 is the EVAL of F1 version and it works too.  User functions only seem to work fine.

  F3, a function of two user settings, produces a graph of NaN.

  F4 is the EVAL of F3 version.  Note that 'B 'is not replaced by 1'.  Also produces a NaN chart.

  F5 produces a graph of NaN.

  F6 is EVAL of F5.  The 'X' is not replaced (even with the ' B' above), and even if it looks like 'X * X', it also produces a graph of NaN.

  

  Is it possible to get defined by the user, with several parameters, features work by tracing the curve?

  Hi!, Fortin:

  If you download and install the ultimate Firmware with the version of the software: 2015 6 17 (8151), with the number of Version: 1.1.2 - 11, you can trace your examples of definition of the function, with curves and values, without NaN.

• WiFi HP ENVY 4500 with several Access Points - same SSIS Configuration

  Hello

  We just got a HP ENVY 4500.  I have a main homenetwork with a wifi Modem/Router and an old router acting as an Access Point to the floor to extend coverage.

  Both have the same SSID and password and are set to different channels.

  My HP ENVY 4500 fails to connect when the Access Point is lit.

  It will connect with it.

  Once connected, I can turn on the PA and all is well.

  The two router an AP using WPA-PSK/WPA2-PSK encriptación

  The router (that it connects to) should have a better sgnal when both are on, so I do not understand why they need the AP to be turned off to connect.

  Any thoughts people?

  Eserim

  I think he has always had problems with several access points.  Try this, what ever AP is closest to the printer, set it to channel 1.  Then try channel 11.  Try now.

• Problem with graphic framerate with Satellite P100

  Hello

  I searched on several forums but I did not describe my problem as I have, well, I don't know that it is similar to the problems having the most with their Windows Vista and nvidia graphics cards. First heres my system

  Satellite p-100
  NVIDIA geforce go 7600
  2.0 ghz centrino duo
  blah blah blah

  in any case, I read that most of you have experienced whie playing games like Oblivion which it will play fine for a while then your framerate drops down and the graphics "stuttering".
  My experience has been that, I start to play a game, and what appears to be a random delay of my computer will crash and shut down.
  I then re - turn on the power and restart my computer.
  Sometimes, I feel a secondary accident during indexing turn it back on for the opening screen vista user, this will continue to happen until I have detach my power running and unplug/reonnect the battery. Then finally I can connect in Vista without crashing it.

  This problem has occurred on several games with games on high and low graphics settings, I tried these games so far: forgotten, Half life 2, Counter strike source and source of life even half 1.
  IT didn't happen while he was playing Microsoft Flight Simulator X and I have no idea why I can't turn the graphic way up on MSFSX, and I wouldn't be an accident.
  Someone has any ideas concerning this problem for other games.
  I've updated my graphic card drivers several times even tried rollign return and others, but nothing works.
  Any help greatly appreciated

  Hello

  I don't know if the post would be useful for you, but I guess that may be:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=26256&MessageID=96185

  and in another thread, a similar problem was discussed:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=25094&MessageID=92107

  Just check it out and I hope that your problem should be solved.
  See you soon

• Interfacing with several unknown USB devices; all producing NMEA strings

  Hi all

  Question about the peripheral USB interface and their associated drivers.

  I have the obligation to build an application that interacts with the USB devices that produce NMEA strings. I have the library to parse NMEA strings, but I fight with interfacing with several unknown USB devices. When deploying applications, I know not all possible USB devices to use.

  Is it possible to produce one driver who will accept any USB device strings?

  Or, more likely, is there a way to get the LV to recognize a connected USB device and automatically find / install the driver like windows does and is it possible to do in a deployed application?

  I had a trawl of the forums, but I've not found anything that specific.

  Thanks, I really appreciate the help.

  About the VI "set up the serial port", my problem is that the choice of COM port is in a separate menu (not directly related to the VI) and it allows all possible COM ports to be selected. That can be addressed.

  I am not expecting an all-in-one solution but asked the question in case it was possible.

  What I realized, is that for my specific condition to read strings from a USB device. It is likely to be sent over a serial connection. LV can handle this well and easily assuming the device has the installed driver / settings are available.

  LV (and indeed any other program) will not work without a device driver / settings. In this case, parameters set must be found (error) / a USB RAW driver would need to be developed. Devices requirng a RAW USB driver would need a serious review to continue due to the time and effort required. All this effort is work inherited from the AIDS to navigation

  I appreciate any help and I think I got the answer I was looking for! Thank you very much

• HP Officejet 6500 a how to scan a document with several pages in a single file?

  HP Officejet 6500 a Plus e-All-in-One - E710n

  Windows 7 (64-bit)

  How to scan a document with several pages in a single file?  After each scan, my old printer (psc 2110) asked if I wanted to scan another page.  In the end, I got a PDF with multiple pages.

  This new creates a file for each page, and I can't find a way to create a PDF with multiple pages.

  Hi mpw101,

  You must press the Add/Remove button, to add pages additionla scanned to the existing file. If you do not see this button try decreasing the analysis DPI setting. Let me know if this helps you?

  

• HP Pavilion a6442p. Update the graphics card with HDMI?

  My second computer is a HP Pavilion a6442p.  I would like to upgrade the graphics card with HDMI because I want to connect it to my TV to use the TV as a monitor.  I realize that the power supply is only 250.  I tried AMD Radeon 4350, but the computer would not set the card to display correctly.  Are there other maps any with HDMI that might work?  I thank in advance, Debbie

  Hi Deb5212,

  Food that I suggested above will replace the existing power supply. It has enough power to handle the NVIDIA 550TI if you wish to get a more powerful video card (but more expensive).

  In general, I recommend the Corsair CX500 because she has enough power to handle most video cards except the very high-end. However, it is more expensive.

  ' HP ' how-to ' articles should be useful.

• SA520W VPN from Site to Site with several VLANs

  Hello

  I have a customer here with several VLANS in their places who wants to set up a VPN from Site to site between 2 devices SA520W. Unfortunately I can not find a way to set it up. In the VPN policy, I can choose between everything (which is not what I want, I want only traffict between subnets the routed via VPN), IP address unique, a beach (in a subnet) and a subnet itself - but only one. I don't find a way to configure several subnets in the selection of local traffic and remotely. Adding another IKE policy between the 2 sites does not either (which is good normally).

  Any ideas? Anything I'm doing wrong?

  Thank you for your help.

  Best regards

  Thomas

  I know that if you have an ASA or a router, you can define as VLANS to pass through the tunnel.

  Do not have access to a SA520W to test...

  A recommendation might be to post the question on the SMB community where they answered questions related to this product, just to check what other people did.

  Federico.