setting priority-common output

Similar Questions

• Not possible to set the HDMI output as default screen on Qosmio G30

  It is not possible to set the HDMI output as default screen! This works only with VGA output. There is no option in the BIOS. According to support, Toshiba will plan any action for this useful feature.

  I use an external TFT with HDMI adapter DVI Cable and I want to have as default screen TFT. With VGA, it will work without problems.
  Any solution?

  Best regards
  Nicolas

  Hi Nicolas

  Very interesting question! In my view, HDMI port is to be used with the HD ready LCD TVs or plasma. Combination of connection HDMI and HD DVD movies, you can really have a HD on your TV picture quality.

  As you know the port is a standard VGA port to connect external displays. The image quality is very good and, in my opinion, you should not use HDMI port for the same. Do you perhaps the best image quality?

• Is there a way to set the audio output in mono in Windows 7?

  I have a set of speakers, but one of the speakers is broken, so for now if I have a stereo song I get only half of the music. Is it possible to set the sound output in mono on Windows 7 so I can listen to the stereo songs via a speaker? I'd rather do than buy a new set of speakers.

  Hi Jamsoup,

  I would like to inform you that, down from sound to mono-stereo sampling is not possible, since stereo sound is a sound standard setting.

  Stereo speakers are designed to produce a sound to both speakers and there is no option to change the settings to use as mono.

  I also suggest that you contact the speaker manufacturer or the manufacturer of the computer for assistance on this issue.

  Thank you, and in what concerns:
  Swathi B - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Set priority higher for front panel events in a Structure of the event

  Hey people,

  I need some advice on the management of events in Labview 2013... I have a structure of the event which handles events of façade (keys) as well as some user events. User events come thick and fast from an external dll. The data as well as this event gets queued at the start and then traced / processed.

  The tricky part is if there are great number of events of the user, the response to the event of the façade is significantly delayed. I get about 80 events back to back user every two seconds. So, if I press a button on the Panel before every two seconds (2 seconds, 4 seconds, 6 seconds... etc) is obviously the delayed answer as opposed to pushing in multiples of 3 seconds (3 seconds then 6 seconds, 9 seconds...) where the reaction is immediate.

  Now I know labview 2013 supports two prioritres while generating events (high & normal) but the problem is in my case, user events come from a dll using the 'PostLVUserEvent' method that does not accept a priority. And I don't see a way to set a priority for the events of façade (keys).

  Any thoughts on how this can be managed?

  Thanks in advance, best regards, Abel.

  The best solution would be to separate user and events of the FP in two independent loops, but I understand that this may be difficult if the two event classes operate on the same data.

  Another possibility is to use two loops serialized, encapsulated together in a larger loop, each containing a structure of the event: the first, with a short timeout, would manage the FP events and could go out on timeout. the second would deal with all user events and would be forced to stop after a predefined number of events managed or, better still, when a quantity preset time has elapsed.

• I can't set the HDMI output as default device and I don't get sound from the HDMI output.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit
  with the NVIDIA GeForce GTS 250 graphics card
   
  Original title: audio HDMI cable no.

  I have been all over these forums and the most useful tips I found, I was not yet able to implement. On the reading tab, there is no Audio HDMI option (Yes, I have two disabled devices show as well as the options show disconnected devices checked) is simply not there.  Someone mentioned set up the speakers as default (I don't have speakers) or possibly definition Realtek Digital Output as default, (the option set as default value is grayed out) I rolled back drivers, drivers updated, unplugged, replugged, rebooted, shut down and was strongly tempted to throw the PC the trash bin as well as my xbox (just for good measure). Is someone can you please tell me what I'm supposed to do now, in addition to courses and purchase of a mac.

  Windows Vista Home Premium SP2 64-bit

  with the NVIDIA GeForce GTS 250 graphics card

  ==========================================================
  The following article might be worth a visit:

  Windows Vista - HDTV: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows-Vista/HDTV-frequently-asked-questions
  (See _ why don't I hear audio when I connect my computer to a HDTV)

• How to set priority dynamically in HumanTask SOA 12 c

  Hi all

  I have a simple process, a humanTask and 2 user tasks, related to the same humanTask.

  I need that in the list of tasks, the priority is 3 in the first userTask and 1 in the second userTask.

  The priority is present in the tab of the userTask under the execData entry, but is defined ad priorityType.

  I don't know how I can create the expression in order to highlight by linking.

  If I put 1 the link is not valid.

  In the oracle documentation, I found only how to change it by setting the humanTask. http://docs.Oracle.com/CD/E36909_01/doc.1111/e15176/bp_hwfconf_shared.htm#BABFBEGH

  Can anyone suggest me how to do?

  Concerning

  Hello

  Unfortunately, the image isn't in my previous answer.

  Try to set the priority of your human task in your human task properties window:

  

  Best regards

  Pedro Gabriel

• How can I keep setting of the output module?

  When I change the setting other than psd (which is default) and add more output module, it keeps going back to psd. Can I keep the same parameter?

  Edit--> output modules. Simply set new default values for a given record type.

  Mylenium

• Setting progressive wrecks output quality

  I have a first sequence that contains only progressive images, all rendered from After Effects comps.  The project is PAL widescreen, which, by default, sets first to the lower field.

  The customer wants what MPEG2, so I add the sequence to Media Encoder.  It records the source of the lower field, as it would, but I need the output to be progressive, so I put it in the basic video settings dialog box.

  I can see in the preview that the quality deteriorates seriously, with edges pixellating and textures fizzing and cracking of shooting like camera movements.  Villain.

  If I set the output to the lower field, the quality is very good.

  I do not understand why progressive setting, deinterlacing, do as much damage to the output - it is absolutely unacceptable for me and the customer, but I'm a little stuck and need help please.

  The customer is to put this film on the kiosks and actors in the media they use, depending on the provider, need of 5.5 Mbps CBR and progressive.  Can I ask why not lower field, but that apart, it is this problem of adjustment do so much damage.

  Thanks for any help.

  Julian.

  I think I knew how to solve this problem.

  I found this thread:

  http://forums.Adobe.com/message/3780954#3780954

  Which is a not dissimilar issue, at least on the hit in quality.  So I created a new sequence, but this time change the default lower field first in progressive, in the middle of the sequence.  Now I get decent MPEG2 expected output - progressive images, progressive sequence, out progressive.

  I went through a large number of formats this morning, creation and Media Encoder, but in all cases, out of the sequence of the first (the lower field value) as progressive, resulted in severely degraded video.

  I guess what threw me was that I made a leap of Premiere Pro 6.5 CS5.5 and 6.5 Pro, I remember you would define a sequence PAL screen wide which has been more weak field first, load both progressive and interlaced footage, edit it, and then generate a Progressive file without problems.

  I wonder now that CS5.5 actually did to cause this problem, and indeed what I'd do if I need to mix the progressive and lower field... on this experience, use a Progressive sequence, I guess.  I guess I better run tests and become familiar with how and what.

  Julian.

• How to change the default setting for the output preview

  Good afternoon! I use the feature to preview the output under Advanced Options > print a little, to get a glimpse of the rendering in a profile of specific simulation (for me, its Web SWOP Grade 3 paper 2006).

  Is it possible to set the default value for a specific profile, instead of one that keeps coming back (output mode: CGATS TR 001)?

  It is very tedious to have to select several times my profile every time I open a PDF and the file in the release of caliber preview.

  Any help would be greatly appreciated... Thank you!

  -Johnny

  All you have to do is set the default CMYK (under Preferences > color management) to the profile that you use most. It will then default to this profile in the output preview, unless you have a specified output mode.

• Why not USB-6509 allow setting input and output on individual ports?

  I have one of the new USB-6509 (96 digital i/o channels) commissions.  It has 12 ports for every 8 bits.  The manual says that you can define the inputs and outputs on a per port basis.  When I read an 8-bit port that I find it clears different ports that I put in place to be digital output.  They seem to be grouped into 3 groups of 4.  0-3, 4-7 and 8-11.  When I read from any single port within this group it erases the other ports in this group that I try to use as exits.  The result is that I can put only input and outputs in groups of 4 ports.  Unfortunately, we have built custom hardware based on the assumption that we could control the inputs and outputs on a basis of port by port.  I see this problem as well with my LabVIEW 7.1 program (see table), as well as the measurement and Automation Explorer.  Is anyone out there seen this problem with the USB-6509?  Anyone using it with success?  I also notice strange problems with power on, but I have yet to understand the model.  IM wondering if I have a defective material or maybe this new material still has problems.  I tried NIDAQ 8.7.1 and 8.8.  Same problem with both. Thank you.

  Thanks for the replies.  It was determined that the USB-6509 we have has a hardware malfunction that is causing the ports to interfere between them.  We are return to OR for repair or replacement.  For now, we used a PCI-DIO-96, which works correctly. Thank you, Andy

• How to set a common background for multiple users?

  We have several users for each computer on the network.  I have put a public office and wish to use our logo that is on "public images" as a background common to each machine.

  This can be done through GPO

  User - Administrative - Office - Office templates configuration - enable Active Desktop wallpaper and office.

• How to set the date output Excel in RTF format

  Hello
  
  I have a report and I have a date named as period column. And I need this field as this MAY-11 output.
  
  So I used this tag <? format-date: CREATION_DATE; "MON - YY'? > when I ran and see the results in rtf his works very well and the exit is on MAY 11, but when I see the result in Excel format its does not display correctly. It shows as 11-MAY '.
  
  Can someone tell me if this is a format problem or a problem with excel.
  
  Thanks and greetings
  Srikkanth

  You can add two spaces at the end to prevent excellent formatting, so that it treats the field as a text.

• Is it possible to set the stereo output to mono in Windows 7

  Stereo to mono in Windows 7

  I looked everywhere in the settings of the sound and the accessibility settings in Windows 7. I can't find THE settings for the computer stereo sound to MONO.  I have the card REALTEK sound integrated on my Gigabyte motherboard.  I checked the settings as well.  The ONLY thing I've been able to do is to change the balance, and it does not solve my problem.  You see, I'm deaf in my left ear, so stereo records that I listen to with headphones on, I miss a lot of the sounds within the music or movie or whatever I'm listening.  On my Mac, all I have to do is click on a button in the settings, and the computer will play the stereo sound from TWO speakers, which is what I want on my PC.  I can't believe that this feature is not available in Windows 7.  Any ideas?

  Right-click on the volume icon in the taskbar > playback devices > select device > configure > choose Mono > then click > click on finish

  is theres another longer way to do this too just make a single lane on the spot but still running two-speaker MONO BAM

• How to set the common lov for all blocks

  Hai All
  
  I created two block named block 1 and block 2.
  
  And I created a lov for block1 display their name and code.
  
  Now I need the lov even block and how do I fix this lov for block
  
  
  Thanks and greetings
  
  Srikkanth.M

  I have two blocks namely head and employee block

  These two blocks are blocks of database?

  In the next block, I got the employees under the head and the Department

  So that these data are related or using any other means?

  I had a single table and I need to enter the data.
  Table called hierarchy_tree
  Head_Empcode, Emp_empcode, From_Date and To_Date.

  This table is for everyone on the block you used in your form?

  My question is if there are four employee under a head then if possible enter all the used four simultaneously.

  You can enter data simultaneously. But you can post sample data. So it will be easy to say something?

  -Clément

• What is the best setting for streaming audio DAC output?

  Entire CD to 44.1 k production, other audio files can be defined above, according to the recording.  What streaming audio, for example KCSM jazz, or any other music station?  What is the best setting of the output of this situation?

  Check the flow rate of flow for the station (you can often check online). It is not anywhere near CD or higher.