Setting the resolution with HDMI

Similar Questions

• I just had a new hard drive installed (with XP), and no matter where I set the resolution, everything seems to be stretched horizontally

  I just had a new hard drive installed with XP, and no matter what I set the resolution to, everything now looks stretched horizontally.  I don't have this problem with the old hard drive containing XP

  If you did a clean installation of XP, then you must install the hardware drivers for your components. Go to the website of the manufacturer of your PC, then download and install the latest Windows XP drivers for your model.

  SC Tom

• Satellite M100: Cannot set the resolution 1368 x 768 on external LCD screen

  Satellite M100-179
  Graphics - ATI x 1400 card.
  Cannot set the resolution 1368 x 768 on connected usung Sub - D LCD TV Samsung 32R72
  There is no resolution 1368 x 768 in the available resolution list.

  The graphics card hardware support different screen resolutions, but if the driver doesn't contain this resolution of the screen so that you cannot choose it.
  I think so you re not able to choose this special resolution on the external display.

  In my opinion it has nothing to do with the graphics card or with the screen, but only with the graphics driver.

• Satellite L505 - 14 d - Starcraft II - cannot set the resolution of 1366 x 768

  I recently bought this laptop, it has an ATI Mobility Radeon HD 5165 HyperMemory graphics card, however, when I installed the game Starcraft II, and tried to change my graphics settings, told me that my video (could say graph, or display card, I do not remember) card was not recognized, and that I might want to check this... I thought, well, that there is probably no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  This starts to become quite annoying, not a HUGE issue by any means, but still, I would like to get this issue resolved. ;)

  My apologies if you have problems to understand what I mean here, that English isn't my mother tongue. Do not hesitate to ask me if you need clarification on anything whatsoever.

  Hello

  > not thought, well, surely this is no problem, as long as everything works fine, but the problem is this; This isn't. I'm unable to set the resolution of 1366 x 768, which is the maximum resolution of the computer normally. The maximum resolution that I can put in this game is 1280 x 768...

  Are you able to set the resolution of 1366 x 768 laptop s display settings?

  If Yes, then I guess that this has nothing to do with the laptop but with the game settings.
  Maybe the game is unable to use a higher resolution because of the pilot or the graphics card compatibility.

  I played a lot of games in the past on my laptop and to be honest game display settings have nothing to do with the general display resolution settings. My laptop resolution is 1400 x 1050, but the different games are available at 1024 x 768 due to the better performance

• How to set the resolution to a VI (NOR-IMAQdx)?

  Hello.

  I can set the resolution very well with the video Mode able & Automation Explorer, but I will in my VI as well.

  I found the property node named 'vidéo Mode' and the problem is that I don't really know, what I have to write in it? I want to reduce my resolution to

  160 x 120

  Thanks in advance

  When I run the VI list of video Modes, it shows me 0(160x120), 1(320x240)... If you run that first of all, it should show you. You could also count what position it is in the list of Max (start at 0). I'd stabbed to 0.

  Mike

• How to set the resolution on in my XP operating system installation.

  I have a computer that had a copy pirated XP, I bought a genuine copy of XP for the computer I built, however, I was unaware that I could use it only for a computer, and I tried to install it on the computer with the pirated XP operating system.  Then, I was unable to adapt to the resolution on the computer that has the OS piriated.  I then bought another windows XP OS, installed on the computer including the resolution and nine I couldn't settle, (who had the OS piriated), however, I still have the same problem of not being able to set the resolution from 600x400dpi. My attempt to use the first copy of XP on my second computer was planting a virus on it?  What should I do to solve the problem?

  After doing a clean install of the operating system, you must then install the drivers for all your hardware. In your case, install the video card drivers will allow you to change the resolution.

  Never get the drivers from Windows Update. Bring:

  1. site of the device mftr. ; OR
  2. site of the card mother mftr. If the material is on board; OR
  3. website of the OEM manufacturer for your specific machine if you have a PC OEM (HP, Dell, Sony, etc.).

  Read the installation instructions on the Web site where you get the drivers.

  To find out what hardware is in your computer:

  1. read all documentation that you got when you purchased the computer.
  2. If the computer is OEM, access the site Web of the OEM for your specific model machine and look at the specs (you'll be there to get the drivers anyway)
  3. download, install and run a program of inventory of the free system like Belarc Advisor or System Information for Windows.

  http://www.belarc.com/free_download.html - Belarc Advisor
  http://www.gtopala.com/ - system information for Windows MS - MVP - Elephant Boy computers - Don ' t Panic!

• How to set the resolution of TV connected to the computer via HDMI?

  original title: new brand lenovo PC, windows 7, connected to my samsung tv with HDMI, screen too large, can not see the button to start clock, icons, etc what do I do?

  I have a new computer Lenovo with Wwhat to do? indows 7; I use a Samsung LED tv for a monitor, HDMI connection.  The screen is too big for the monitor, I don't see the button start, icons, clock, etc.

  Hello

  You can see the following article for more information on monitor display problems:

   

  Get the best display on your monitor

  http://Windows.Microsoft.com/en-us/Windows7/getting-the-best-display-on-your-monitor

   

  Ways to improve display quality

  http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-display-quality

  Let us know if that helps.

• Portege R700-S1321 - cannot set the resolution of 1366 x 768

  I have exactly the same problem, as shown in:

  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?threadID=64809

  The resolution of the laptop to random times and intervals seems to support a maximum of 1280 x 700, which translates into a 2 inch black bar on the right side and the button start Windows 7 off the screen.

  Currently its stuck in the resolution of the screen and no matter what I may not make it back to normal 1366 x 768.

  External monitors very well with the laptop work.

  Its 2.20 BIOS execution that seems to me later.

  It seems that the intel driver must get some information that is incorrect.
  Research on different forums and using moninfo, I see that the internal display does not support EDID and settings appear to be set by the registry somehow.

  I also tried to make an EDID override by creating an inf file that is customized with Moninfo, but appears not to the question of the effect.

  I also tried to restore from the recovery many times discs without success.
  During the installation of windows occurs, the screen is fine.
  When Toshiba additional programs are added to the screen returns to the 1280 x 700.
  I suspect that what happens when the graphics driver intel is installed.

  If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  Anyone else had this issue and understand how to fix it? I see also that intel do not support EDID override.

  Any idea is appreciated. Thank you.

  > If I boot the laptop in safe mode resolution is 1366 x 768, which seems to suggest that it is the driver who has a problem.

  I think you are on the right track, and I think that his untimely pilot.
  That's why I recommend you to uninstall the Intel graphics driver in Device Manager.

  PORTEGE R700-S1321 was equipped with the Intel® Core i5 - 520 M processor and this processor supports the Intel® HD graphics card

  The latest Intel HD driver can be downloaded directly from the page of Intel:
  [Driver for Intel Core with Intel HD Graphics processors | https://downloadcenter.intel.com/SearchResult.aspx?lang=eng&ProductFamily=Graphics& ProductLine = graphic + portable + pilots & ProductProduct = Intel % C2% AE + Core E2% 84% A2 + processors + with + Intel % 2 C % AE + HD + Graphics & ProdId = 3231 & LineId 1101 = & FamilyId = 39]

  I need to download the zip package.
  Then you can install the driver through Device Manager by using the Advanced installation procedure. This allows you to link directly to this zip package. Windows system would automatically take the driver. After restarting again you that would have settled the last drivers and you should change your resolution.

• Connection Satellite L750D to the TV with HDMI cable

  I tried to connect a laptop L750D to a Phillips TV but none is displayed on the TV and the message on the TV is «unsupported video»

  When I connected the laptop to the TV and turned on the laptop, it's in restart mode and the messages showed on TV, but as soon as windows has started to the top of the screen of the TV turned blue and the "unsupported video" message appeared.

  I then plugged a laptop HP pavilion g series to the TV with the HDMI cable and using the same port HDMI on the TV and the computer screen is appeared on television right now.

  Can someone help me please?

  Hello

  Try this:
  Both devices (TV and laptop) must be turned off but connected with a HDMI cable.
  Then turn on the TV and the laptop.
  After Windows has started, use the Fn + F5 secret key to switch the video output to TV.
  Is this possible?

  By the way: have you chosen the right graphic resolution and supported?
  Don't forget that you TV supports the resolution which has been chosen!

• Sound does not work when it is connected to the TV with HDMI

  I have a HP Pavilion Notebook PC, DV7 - 6813EV, running windows 7 Home Premium 64-bit SP1. My problem is that I have no sound when connected to my TV HDMI connection and press. Please could someone help me? Thanks in advance

  Hello gematz,

  The sound does not work when it is connected to the TV via HDMI.

  Go to start.

  Type sound.

  Click sound

  On the playback tab, click with the right button on the HDMI interface, and then select set as default device.

  If you do not see the HDMI, right click and select devices see off, then set as default.

  I would like to know how everything goes.

• It is best to set the resolution size and icon of the screen up

  It is best to set the maximum screen resolution before attempting to adjust the size of icons and text on the desktop, notification area, Quick Launch bar and start menu? I know that the icons can be made to the largest and by choosing a lower screen resolution but y at - it a benefit to have the maximum resolution? My view is not too good and I need icons and text to be big enough.

  Hello

  The screen, or the screen resolution, resolution refers to the size of the whole image displayed on your computer screen. Specifically, he refers the number of picture elements, or pixels, which are displayed at the same time. A pixel is the smallest element on your computer screen, the more pixels, the more detailed the picture will be. With fewer pixels, display items will be larger, but there will be less space on the desktop for windows and the programs to run.

  You can visit the link provided below for more information about the screen resolution in Windows XP.

  To change your screen resolution

  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/display_change_screen_resolution.mspx?mfr=true

  See also:

  Change your screen resolution

  http://Windows.Microsoft.com/en-us/Windows-XP/help/change-screen-resolution

• How to set the resolution of a sequence in first?

  I built a sequence that looked like, it was full frame (at least in width) in the window of the program, but when I export to Youtube to 720HD, its got a large black border on all sides. This particular sequence contains a lot of still images, with splashes of color used to show the video in a part of the image. I don't mind a small black border at the top and bottom, but there must be a way to export it where he resumed all of the horizontal resolution.

  Ideally, I start the project to a friendly resolution of YouTube and conform to the media by the scale, so that I may fill the screen. What tools am I missing here?

  In general, the CC of PrPro versions, we choose the main type of media for rates/image size that will be in the removal project just a clip from that on the blank/empty box sequence. PrPro then sets the parameters of the sequence according to this clip. If your export to YouTube in a format 720HD is your main concern, you can click on the "new item" icon at the bottom right of the project Panel and choose 'new sequence' and set it to a 1280 x 720 at the frame rate used by key video clips that you use.

  Then, when you add media to other sizes, you can select 'set to size of the image' or balance-for or whether you need to apply in an optimal way.

  Neil

• Satellite A500 - 15 M: unable to connect to the TV with HDMI

  Hello

  I have a Satellite A500 - 15M. I recently tried to connect to my TV so I could watch certain shows online on my Hannspree Xv HD ready TV.
  The HDMI out does any record on the TV - the TV displays a message "not supported" and remains off (as if there is no signal) - display settings on the PC it does not recognize the TV... actually it [Intel Graphics and Media Control Panel] indicates that the TV/monitor settings are not supported.

  But I can connect via the VGA output - although I have to delete the display settings to 1024 x 768 to show on TV. In addition the display on the TV then is mainly pink and red, even if my pc display peak is most often blue. -start of the Toshiba screen displays on the TV, without any problems and one or twice the login screen was displayed too much, but then sometimes it isn't...
  I know that's not the VGA cable as I can connect to the TV with it on netbook advent my wife without any problem.
  Are there drivers, I need to update / download? Or I need to change the settings?
  How can I get my screen on my TV?

  Any help would be greatly appreciated. Thank you

  Hello

  First, you must connect the two machines (laptop and TV via HDMI) when the two devices are turned off. After turn on the TV and the laptop.

  You must choose the HDMI on TV channel and should then use the FN + F5 key combination to switch the video output to the TV.

  If this does not help, try updating the graphics card driver.
  It seems that your laptop supports the Intel graphics chip. Therefore, you can see the Intel page for new drivers.

  Welcome them

• Tecra S11 - change the resolution with FN keys gives an error

  Hello

  When I change the resolution of the screen with FN + space key combo, then background turns white and the icons on the desktop disappear. Windows 7 Professional / Tecra S11

  When you try, after FN + space press WIN + D (see the "D" esktop) combo and white background will appear.

  It's a Toshiba sw related issue or Win7

  Thank you

  Hi petersm,

  You may notice the behavior even if you change the screen resolution by using the options of the display driver?

  Maybe you need to reinstall Toshiba added value Pacakge that controls the FN keys

• Tecra A4: Cannot set the resolution of 1280 x 800

  Hi all.

  I have a Tecra A4, and for the last 2 days I am trying set up the screen at native resolution of 1280 x 800, without sucssess.

  I try a lot of things, like updating drivers, use the restoration of the system, the value 'stretch' in the BIOS, etc, but this resolution do not appear on the display settings (I use XP SP2). I've only 800 x 600 and 1024 x 768.

  In any of these resolutions, a wide black border appear to the right of the screen. A small border appears on the bottom, too.

  Please, how can I solve this problem? I don't want to use the Toshiba restore, some programs I use are very difficult to find and install.

  Thank you.

  You cannot set this resolution if this resolution of 1280 x 800 is not part of the display driver.
  The graphics card driver contains all available resolutions and if one is missing, I mean not rated, it s not able to select

  Nothing to buddy