Setting top stopping point

Similar Questions

• "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".

  Original title: when setting up Windows Media Center, I get the error message: "IR hardware not detected".

  I have an internal TV Tuner that has been installed by HP, when I bought recently a "computer build-your-own." (According to the control panel Device Manager, my tuner is a Win TV HVR 1290, made by Hauppauge). The computer came with Windows 7. While installing Windows Media Center, after setting up the TV Signal (on channel 3) I am able to see a video thumbnail on my computer screen. I am also able to change the channel using my remote control U-Verse (not the Windows remote control supplied with the computer). So far so good! I then hit next and get the following message: "Windows Media Center cannot detect the IR control cables, which are necessary to control the set-top box. Fixing parts IR that supports the IR control cables and then try again. IR HARDWARE NOT FOUND ".  After you receive this message, the installation procedure is completed. I called HP that support intalled the tuner. They had not the slightest idea what to do. I then called Hauppage customer (manufacturer of TV Tuner). They said that I need to plug one end of the IR Blaster cable that shipped with the computer in a slot in the back of my computer (they told me which slot). They said so to run the IR all the way cable to my cable box and the other end of the cable to my cable box of band. They said it was necessary to be able to use my Microsoft Remote to instruct the box to change channels (cable IR stuck on the box). I told her that I did not use the Microsoft Remote, I could change the channel with my U-verse remote (that I preferred to use anyway). He said that it took the cable on the band decoder in order to remove the error message and the installation of Windows Media Center. I then called U-Verse technical adapter who informed me of their set-top boxes (made by Cisco Systems) do not have the ability to receive signals IR IR Blaster cable (or any othe IR signal source). Microsoft is apparently not understand how U-Verse set-top boxes are designed to work and sells a product incompatible remote control/IR. My question is this: How do I set up Windows Media Center, in order to avoid getting the error message "IR hardware not detected" when you install Windows Media Center and just use the remote control of the U-Verse that I prefer to use in the first place. Once understand you this point, please send the information to HP, At & T U-Verse and others. Thank you.

  Ron, I have something for you!

  and for all the people who have this problem :)

  Hi, I had the time of IR not detected in Windows 7 Ultimate with a TV wonder 650 card and a box of digital adapter from Verizon for my PC... Go on the road to installation and after the Media Center channel search, choose manual configuration. Choose the aerial signal (I aso picked after this analog) l. After he sought more, he finds no channels.  Do not be afraid. Just accept it and go to the main settings page in the Mediacenter. If I remember correctly, then select TV Guide. Choose Add channel. I added the channel 3.

  Since my Verizon box has no IR for the computer, I added the channel 3 for the media Center and I change the channels with my Verizon remote. All my stations in the Verizon box go to Channel 3.

  The story here is so, for some reason any Windows detects that only my box channel signal TV and you must manually configure the media center on the air, then go to settings and add the channel you want in the guide.

  Why the guide TV control which channel you can tune is beyond me, but the scanner locks all channels, it does not detect. they must be added manually in the guide.

  My TV works and looks okay now.

  It actually works!

  the only problem is that it is not in HD

  but there is something

  
  

• Unable to set the anchor points of the path when the keyframes turned on...

  I have a layer of irregular shape who I am deformation over time (from smallest to largest). I am able to set the anchor points of the path to the forms I want, but once I put two keyframes for the path I'm interpolating a slide, I'm more able to set the anchor points for minor changes, for example, I am unable to draw the Bézier handles. If I disable keyframes, then I am allowed to adjust the anchor again, but that means I have to start whenever I need to make an adjustment. I have run successfully the concept but need to change several layers of form in this way, and not having is not access to the Bézier handles point of anchorage slows productivity.

  Any ideas?

  Thanks in advance,

  Chris

  12.2.1.5 AE

  Mac 10.9.4

  Sorry, I missed the rather obscure reference to an expression in the first post you. Had, I had to pay more attention I'd say disable the expression to change the path, and then select. Not being able to select a top with the marks of perfectly logical on expression because it is turned on with the full path is selected by the expression of all time. This is how work expressions. This seems to be a lot of trouble to go just to change the "timing" of a couple of keyframes.

• How to burn videos full hd to dvd - r with Blu - ray burner for playback on a Blu - ray set top player?

  Hello

  Blu - ray media is still expensive for export small HD projects.

  If I have a Blu - ray burner,

  can I burn BD on DVD-r (4.7 GB) exports

  and play on a Blu - ray set top player?

  alias: DVD-r accepts a laser "blue"?

  (Menus at this point are not necessary)

  For the most part, I'm wanting to burn music videos for 3-4 minutes on DVD-r disks

  full HD Blu - ray without having to use expensive Blu - ray disc every time.

  Thank you

  j

  Ouch!  I don't really remember, but I think I burn with a DVD ol burner ' ordinary.  I have two; a BD - R drive and the DVD-R drive.  Once the image is made I don't think it's important.

  I would say go for it.

  If I'm wrong, I'll blame "Friday afternoon near time to quit smoking."

  Erik

• Toshiba WL863 takes too long to start and its Set Top box problem

  Hello

  Aside from no YouTube on the TV - is not a real question

  I have 2 problems with WL863 TV:

  1. the TV takes long time to turn on (between 2.5 and 4 minutes).
  2. the sound of the TV from a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  I use the latest firmware.

  This would have something to do with the settings, or do I have to send the TV for repair under warranty?

  Please give some suggestions.

  Thank you

  > 1. The TV takes time to market (between 2.5 and 4 minutes).
  Have you noticed that in the past, or the first day of purchase?

  If not, I recommend you load the default settings (reset) TVs and check it again.
  In the case where the reset won't help you, it might be that a question and device TV related material must be verified by the service agent.

  > 2. The sound of the television to a Set Top box (HDMI) changes from time to time, as if a low-pass filter has been activated, living just a whistling noise, but returns to normal every few minutes.

  This problem could be linked to the connected Set Top Box and not the TV device.

  TV receives the audio signal from the external, connected HDMI (in your Set Top Box case) device. Check if the same audio issues would be noticeable by using another external device like a DVD or BD player. In case the sound issue would be noticeable only with decoder, the question isn't related to the TV, but to the external device.

• Digital Cable Set Top Box connected to the Media Center computer, forced to keep MC on the use of channels 3-cant TV Guide in Media Center to record

  I have to keep the center of the media on channel 3, and the decoder controls the channel I want to watch or record.  For example if I want to record channel 631 21:00 to 23:00 I would say the MC to record channel 3 for as many programs they broadcast between 9 and 23:00.  This process does not allow registration of the MC - guide as it was planned. I have to use the channels on the cable box only and always have the Media Center on channel 3. Is it possible to come back with the MC TV Guide and record by this guide as it was designed to do, while still using the cable set top box or some other Descrambler for replacement by the cable operator?  Basically, the decoder is a decoder which makes us put all our TV on channel 3.  But the cable ready TV I hear do not need the box, they can use another device.  The computer can do the same?  Nobody seems to have no answer to this problem.  Help!?

  I read your question. I asked you what happened when running
  TV Setup and specifically want to know if the TV Setup detected your set top
  Box/decoder and it happened. If Media Center does not automatically detect your decoder,
  have you tried the manual method to learn codes? I'm trying to help you
  features of Media Center EPG.
   
  You must ask the FIOS people if they have the equivalent of a DTA
  offered in the world of cable and OTA.
   
   
  Barb
   
  MVP - Windows/entertainment and connected home
   
  http://digitalmediaphile.com/
   
  Please mark as answer if that answers your question
   
   
   
   

• With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop. Do not install. Party at 3 x through process 80070002. How to fix?

  With the help of Vista on the laptop. Receive 3 updates on initialize to the top & stop.  Do not install.  Party at 3 x through process 80070002. How to fix?  3 updates failed to install: KB2779562, KB2705219 and KB2722913.  Constantly configures updates during startup and shutdown.  Takes a long time for the two workers.  Can anyone give advice?

  To decode 0 x 80070002. X 0 means that it is a hexadecimal number, 8 , error, the first 7 means it a windows error and the rest of Eastern 2, the number, the Windows error.

   

  To search for the error message we need to decimal format. Start the Calculator (Start - All Programs - Accessories - calculator) and choose the menu display - scientific, then the menu display - Hex. Enter 2 Menu display - decimal. It will say 2.

   

  Start an command prompt (Start - All Programs - Accessories - command prompt) and type

   

  net helpmsg 2

   

  and it will say

   

  The system cannot find the specified file.

   

  Use Notepad to search for FATAL and 80070002 in C:\Windows\Windowsupdate.log.

• Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."

  Cannot set the restore point with the error "The Volume Shadow Copy service used by the system restore does not work."  How can this be repaired?

  Hi rebick,.

  Try the troubleshooting steps presented by spirit X in this thread.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows Media Center didn't recognize Cisco/ATT Uverse Set top Box remote

  With Windows 7 Media Center throughout the TV Setup Wizard, everything works until the screen of the decoder.  Automatic set-top box set up does not work.  Through the screen to identify my decoder does not work.  There is not an option for Cisco (there are 361 other).  It seems that Cisco should be on this list.

  Using the function "learning" remote does not work either.  Media Centre telling me that it does not recognize the remote.

  There is information on the web about this, but I have not seen an emphatic solution.

  Thanks for your insight into this problem.

  Please visit this link

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/able-to-see-live-TV-in-Windows-Media-Center/06193a43-D267-4B34-8e9c-5248bc424473

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/att-cable-box-Cisco-MN-ipn4320-wont-work-with-WMC/bb6684bd-628c-4F63-be82-fb800e71f5bd

• Driver for Motorola Set-Top Box QIP6416 to Windows 7

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  I would like to take the a/v out of Verizon Set Top Box (QIP6416-2) and use Windows Media Player to watch cable (FIOS) TV using the Line In input for a card CREATIVE Audigy.

  Thank you

  Art

  You may be able to find the necessary help in the link provided below.

  http://www.Verizon.com/support/Residential/TV/fiostv/Receivers/User+guides/User+guides.htm#.

  Set up and install.

  http://www.Verizon.com/support/residential/TV/Setup.htm

  Quick Guide to Verizon

  http://www.Verizon.com/support/residential/QuickGuides/index.htm

  If you wait long enough on the installation and install the page, you will get a popup offering help via a chat.

• Setting tab stops in the 8.1 Windows wordpad

  I just bought a new laptop. Theres so much changed since Windows XP. I now have Windows 8 and I cannot figure out how to set tab stops in wordpad. theres no button formatting. Can someone help me please?

  Thank you.

  Hi there, click paragraph, and then you will see the tabs button to set tab stops (for that paragraph, or for all of them, according to what has been highlighted / selected before you clicked on it).

• How can I activate the scrolling of the effects? I get "to activate scrolling effects your page must use a unique fixed stopping point." How can I do this?

  I have tried several things to enable scrolling of the effects, however, I can't seem to make it work. I get the message ' to activate the effects of scroll your page should use a unique fixed stopping point. " How can I change this so that my tab scroller are available? It's my first week using Muse, so I am very familiar with the software.

  Thank you!

  Hello

  is that you have already looked at working on the site so please be sure 2 things to activate the effects of roll for the site.

  1. There is only a breakpoint in the page as shown in the screenshot below.

  

  2 right-click on the breakpoint bar and select 'Breakpoint properties' and select 'Fixed width' instead of liquid.

   

  In case you are starting from scratch then be sure to select 'Fixed width' at the time of the creation of the new site.

  

  Kind regards

  Vivek

• How do I click option to set a sampling point?

  Photoshop elements 14 does not allow me to use the clone tool, because there is no point source selected. How to set a sampling point?

  Hold down the ALT key, and then click

• Hi, I can't download the trail. It is said that migration is not necessary by setting.  Stop smoking in the library.

  I can't download the trail. It is said that migration is not necessary by setting.  Stop smoking in the library.

  I deleted all the files on the error in the file "Adobe", and I downloaded it again. It worked this time. Thank you.

• How can I set at the point when the [key does not work because I have a German keyboard?

  Hi, I'm new to CS6 and worked through the book of Adobe After Effects. Some of the shortcuts do not work for me, probably because I use a German keyboard. In Chapter 11, I have problems because I need to select a layer, go to a specific time and then set to the point, but the [key does not work. Does anyone know a German equivalent or another way to set the point to? Otherwise, if I look at the colored bar in the timeline representing the layer that I want to put a point, can I get the same effect by dragging the edge of the colored bar until I reached the time limit? Or that fails to preserve the relationship of all images existing keys, etc. that I have implemented for a layer in a way that the [key would be? Grateful for any advice.

  Shift + o/a, o/a and so on. Also kann man mit Sttrg + shift + D die ebony einfach und den Teil parts, den man nicht parish, löschen. Ansonsten einfach evil die die Shortcuts.txt Datei deepening und oder das KeyEd Up Script dafur use squad.

  Mylenium