setting up a printer has slain

Similar Questions

• Attempts to connect to the Dell V505 printer wireless set up - get error "WSD Print has not a driver" peripheral.

  I'm trying to set up a printer Dell V505 to a Dell Studio laptop running Windows 7.  I followed an indicating knowledge base article I want to uninstall my driver from dell and installed by using the Windows Vista SP2 compatibility mode, what I've done. After having done that, I'm gettting error "WSD Print device is not a driver" I'm not sure if it's a windows problem or from dell if seeking answers at once.

  This printer connected easily to the Vista desktop running when put in place wirelessly.d

  Thanks for any help.

  Connect to the device using the WSD Protocol is available only when it is directly connected to the printer.   Try setting the printer using a Standard TCP/IP Port or if the Vista machine is 32 bit, and Windows 7 machine is also 32 bits (or the two bits 64) sharing the printer from Vista and establish a connection to get the installed printer driver, and then perform the network plug and play on the Plug-and-play device should use the driver to install the rest of the unit.

  You will need the network printer configuration page to obtain the host name or IP address and create a Standard TCP/IP Port. Alan Morris Windows printing team; Here Microsoft Knowledge Base search: http://support.microsoft.com/search/Default.aspx?adv=1

• In the Pages, you can set crop marks printer?

  In the Pages, you can set crop marks printer?

  Printer crop marks are not implemented in any version of Pages using v5.6.1. Export to PDF and open it in the designer of the affinity. Once again export to PDF and apply the printing marks in the menu export. The following has been open in the designer of the affinity and exported in the form of a PDF/A-1 a with all the points you see here:

  

• CHANGE OF E-MAIL OF THE HP PHOTOSMART D110 PRINTER HAS

  CHANGE OF E-MAIL OF THE HP PHOTOSMART D110 PRINTER HAS

  Hi @HOMERO

  Welcome to the Forums of HP's Support.  I think that you are asking how to change the email ePrint printer Photosmart D110a address.

  I've included the document setting upward a Custom E-mail address for HP ePrint .  It will guide you in how to customize ePrint printer address.  There the steps if you are already registered and you have not saved.

  Please let me know if I misunderstood your message.

• LaserJet M1212nf: Problems setting up wireless printing

  I can set up to print from my laptop with a USB connection to the printer. I want to be able to print when away from my office, so have tried for 2 years, on and off, to get my printer to print wireless. I spent probably 10 + hours trying to get this set up. In the end, I always end up having to reinstall the printer with the same old USB connection.

  It drives me crazy. I'm a tech writer for a society of software and very savvy in computer science. However, my non-techie family have all managed to set up wireless printing at their home in 5 minutes or less with different brands of printers.

  Here are the steps that I followed, although I also tried many variations, like trying with my USB cable connected or disconnected.

  (1) uninstall the current installation of the printer (USB).

  (2) on the printer itself, make sure that the settings > network settings are the default values.

  (3) using the latest drivers and installation .exe from the HP site, start a new installation of the printer.

  (4) when you are prompted, select "wireless."

  RESULT: even if my firewall is turned OFF, search and indicates that he is there any printer on the network. (Huh? Which network?)

  (5) try again once and this time select "Network Setup."

  RESULT: even if my firewall is turned OFF, search and says that it cannot detect a network.

  If the wireless installation requires a network, but network installation does not cause a network to install, I don't know where to go from here.

  (6) I also tried downloading and installing the ePrint utility, but when I'm at halfway through the installation, it tells me that it cannot find my printer.

  I am suspicious that my model M1212nf MFP may even not allow for wireless printing. Some info on the HP site says to check a particular button lights up to indicate that the printer is online. This light does not exist on my printer model. However, the parameters of the printer from my physics has parameters such as: "show IP address," etc., which would lead me to believe that it can work wireless.

  I have read all the help related HP printer, and there is nothing which explains, in simple language, what are the types of cables, I need to set up a network and the Wi - Fi connection, when to plug them in, what facilities to perform on the many Add - ons available, etc.. I don't know that it's a 5 minute process if there was just a good explanation in the help of the UP of how do. Assistance would be appreciated!

  Hello @SKYdiz,

  Welcome to the Forums of HP Support!

  I understand that you have had problems for the last 2 years and spent many hours trying to configure your HP LaserJet Pro M1212nf MFP for wireless printing. At this point I'll provide more information about it. First of all, are sitting you?

  Unfortunately, the HP LaserJet Pro M1212nf multifunction printer isn't a model wireless printer. The "nf" at the end of the name of the printer is the abbreviation of 'network, fax. Therefore, if your printer is not able to connect to your router wireless, it CAN connect with an ethernet cable.

  All you need to do is connect an ethernet cable to the back of your printer to your router. That all devices connected to this router even (whether through wireless or wired ethernet connections) would be able to 'see' your printer on the network and print it on your printer. For more information on configuring ethernet on your printer, please visit: Setup the printer to a wired network in Windows 7 for HP's LaserJet printers.

  Now, if an ethernet connection does not work in your specific network, HP makes other Laserjet models that do not use the wireless function. Here are two LaserJet who are black only, multifunction wireless units that resemble your current printer model: HP LaserJet MFP HP LaserJet MFP M225dw Pro and M127fw Pro.

  Please let me know if this clears up any confusion. If you have other questions or concerns, I'll be more than happy to help you. Happy new year!

• Cannot set a default printer

  This comes in our helpdesk today, and I have absolutely no idea on how to solve this problem.

  -The client has just had new printer Lexmark Pro 915 installed.  Can correctly print a test page for the properties of the printer.
  -Cannot print from Excel.  It is said that no printer is found.
  -L' printer is not marked as default.  When I try to set the default printer, nothing happens.
  -No printer cannot be set as default.  When you try to do, nothing happens.
  -L' printer is connected and coming as "ready".  Still, test page prints fine.
  -Tried to uninstall the old unused printers from Add/Remove programs.  Restarted the computer.  No effect.
  -Tried to uninstall, reboot, and reinstall the printer Lexmark Pro 915.  Behaves in the same way (tried to settle before removing administrator rights, so by default).
  -Tried to completely close down the computer, unplug and remove the battery, but once it has restarted, he always had the same problem.  No printer can be set as default.
  -L' printer is still recognized by the computer, but it is not the default.  In some programs (Notepad, IE), it can always print, although he must select manually.  In Word and Excel, the old printer which has since been completely uninstalled still appears as the default.  In Word, the printer by default only presents itself as a blank line, but you can select the printer in a menu drop-down.  In Excel, it leaves no him print at all, saying that no printer is found.  It does allow him to select a printer.  It is a big problem since Excel is the program that it needs to be able to print from most.

  The machine in question is a Tablet from Lenovo under Windows XP SP3 x 86. Thank you

  Hello

  You are connected to a domain?

  I suggest you to follow the steps and check if it helps.

  Method 1: You can also uninstall all drivers device mananger printer and check if it helps.

  (a) go to start and click RUN.

  (b) type Devmgmt.msc, and then click OK.

  (c) locate old printer drivers and do a right click on it and click on uninstall.

  Method 2: Run the microsoft Fix - it for the link and if it helps.

  Diagnose and automatically fix problems printing and printer

• "set as default printer" is not an option

  My default printer some how was chosen as OneNote 2007.  I tried to change my default printer to the one I want, but it won't allow me.  I clicked on the printer that I want to and it gives me an accurate list options but not "set as default printer".  Please help me fix this because I can't print until this problem is corrected.

  Try right click on the printer you want to sometimes - it seems there are two menus and it seems random as it appears.  One contains the option, the other does not.  Try several times - and then set it aside and try again.  I think at some point, you will get the correct menu and be able to make the change.

  In the meantime, certainlly you can print.  Just use the file / print option where you select the printer and choose the one you want to print on (you cannot use the "print" button, but you will still be able to print).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• How can I set my default printer?

  my printer has worked fine since I installed it initially. Now today, it seems not to be the default printer. But I can't work on how to change default

  Original title: How can I set my default printer, I have office 2010, it was OK, but for some reason, it is by default.

  Hi MinnieTraynor,

  Thanks for posting in the Microsoft Community. It seems that you have a problem with setting the default printer on Windows 7. This can be very frustrating for you, and I appreciate the efforts you have put in. Let us work together as a team to get this number fixed.

  We start with a few questions-

  (1) what is the brand and model of the printer?

  (2) have you made changes on the computer?

  I would like more information about the issue.

  Method-

  I would have you look at the article-

  Change your default printer

  http://Windows.Microsoft.com/is-is/Windows7/change-your-default-printer

  In addition, I would have to see the article-

  Solve printer problems

  http://Windows.Microsoft.com/en-in/Windows/printer-problems-in-Windows-help#fix-printer-problems=Windows-7&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  We know if you need help. We will be happy to help you.

  Thank you.

• The bad language displayed on the LCD after you set up the printer

  HP Photosmart C4450 all-in-one printer Solution Center keeps popping up the following:

  "The wrong language displayed on the LCD after you set up the printer.

  The printer has been upward and works well for months and all of a sudden it stopped working and refusing to speak English.

  It is totally insensitive to one of the buttons pressed. The LCD screen is white and gray just glowing.

  How can I solve this problem?

  Thanks in advance for any help.

  Hello

  I don't know how your printer got himself into this difficult situation, but I think a reset should back you on track.

  I think this could work to its original factory settings to install your printer.

  To do a complete reset follow these steps:

  1. disconnect the power cable from the back of the printer.

  2 do nothing for about 30 seconds.

  3 press and hold the Cancel & color copy, keep their detention now connect the power cord to the back of the printer.

  This should be left to the printer to the condition, it is in when you took it out of the box.

  I hope this helps.

• How can Hello I set a default printer with JAVASCRIPT? or send directly to a printer, I am programmer

  I'm a programmer and I need to print the 2 files in 2 different printers (with labels Zebra and letter to a strong), I have the sharp or default Zebra printer when I send the file to print, this take the size default to the default printer and it is printed with this size, a letter as a label and a label as a letter How do I set a default printer in JAVASCRIPT or send a file directly to a printer by JAVASCRIPT?

  How your web application user initiates not print function?

  There are two distinct "Print" buttons on the page? One of the labels for Zebra and other print of the 'letter' to the strong?
  
  Or is it a function of sequential type, where the label is supposed to be printed Zebra and the 'letter' to the sharp in one operation of button "print"?

• Is there a way you can set up a printer hp 7520 to analyze the auto size?

  When I scan from the printer or the computer, I either make real and then later crop size or size to scan. When I had my photosmart hp over the printer. I had to do this it would automatically detect that and scan at that size. Is there a way I can set up my printer to automatically detect the size of everything in the printer? I thought a new printer would be better, but it is causing more and more problems I.

  Hello

  Unfortunately not for this printer, you must select the scanning area we want to analyze

  Kind regards.

• my printer has changed its policy to be very small characters and we can't read, how do I change the police?

  model printer officejet 4500 printer all in one, running windows XP

  The printer has changed its own police force.  I can't find anything to restore.  It is incredibly small and difficult to read.  I tried to restore the default values that did not work.

  OK when you open firefox go to file > Page Setup > ladder.

  Change the size of the scale and see if it makes a difference when you print.

• Photosmart 5510: my version of windows is replaced by windows 10 and my hp printer has been disconnected.

  My version of windows is replaced by windows 10 and my hp printer has been disconnected. Please help me to connect without disc

  The problem is not yet ressolved. The printer cannot connect to the wireless router.

  Test report says wireless network name (SSID) found "Fail".

• Printer has slowed in the print queue

  Original title: the printer has slowed during printing that

  Over the past two days, print PDF jobs slowed much.

  Hello

  1. what version of Windows is installed on your computer?

  2. What is the number of brand and model of your printer?

  3. have you made any recent hardware or exchange of software on your computer before this problem?

  4. you receive an error code or error message?

  5. do the same thing happens when you print other documents/files?

  Please provide us with more information on the specific question to help you to fix as soon as possible.

  I also suggest to follow the below links:

  Method 1:

  Diagnose and automatically fix problems printing and printer:

  http://support.Microsoft.com/mats/printing_problems/

  Method 2:

  Printer in Windows problems:

  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows

  I hope this helps.

• HP Photosmart C309a printer has error 0x61011be5

  My printer has a gear grinding noise and the 0x61011be5 error message. You will find a short solution to buy a new printer? Thanx

  As OEM HP is responsible for the good operation of the printer and their drivers. Check with
  HP support, their documentation online and drivers and ask in their forums.

  HP - Photosmart Premium Fax all-in-One Printer - C309a<- product="" support="" and="">
  http://h10025.www1.HP.com/ewfrf/wc/product?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=us

  HP - Software & Driver Downloads - HP Photosmart Premium Fax all-in-One Printer - C309a<->
  your version of Windows.
  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?product=3737195&LC=en&cc=us&DLC=en&lang=en&cc=us

  Support HP & drivers
  http://welcome.HP.com/country/us/en/support.html

  Contact HP
  http://welcome.HP.com/country/us/en/contact_us.html

  HP forums
  http://h30434.www3.HP.com/PSG/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">