Setting up the workforce planning

Similar Questions

• Re-initialize the workforce planning

  Hello

  We use the Classic 11.1.2 application. Workforce planning was purchased during the initialization of the project. Total 3 possibilities of use and 4 types of diet (PL, Rev, salary and manpower planning) in each application. After you initialize the request once of the workforce planning on the one hand demand, the workforce planning has been abandoned so all forms and related content has been removed from this planning application (the essbase cube and relational databases is still there).

  How we can reset it? The initialization option under administration - boot is not visible in this application. 2 other applications always have the option to initialize the workforce planning. Do we not have to recreate the application?

  Thanks in advance.

  I advise to do, however if you are still interested, here's the link Oracle - Hyperion Labs...: re - initialize the Capex and labor

  Concerning

  Celvin

  http://www.orahyplabs.com

• Need guidance in the workforce planning

  Hi all
  
  I'm working on the project, where I create forms of data in the workforce planning. I also read staff of Oracle Hyperion planning Administrator's Guide. My question is can someone help or guide me to create types of my plan?
  
  I can create dimensions of navigation > Administration > Dimensions > Add Dimensions
  
  I can create forms of navigation data > Administration > forms of data management > Create
  
  In light of issues I have confusion on sub...
  
  1 I know there is data pre-build forms... so, how can we change and use them for loading data? I can understand, we can load load SUN or utility contour data but how can load us data manually?
  
  2. What is the relationship between a Dimension and data forms that I mentioned up there? If I create Dimensions, we can work or data forms or is there any other philosophy?
  
  3. how to increase the lines and columns in these forms of data and what are the areas for HR?
  
  I learned to create two-dimensional, i.e. officials and positions. I can create those Dimensions as I mentioned above the steps, but what kind of parents and children that I need and how do I load these dimensions in actual data forms.
  
  I hope a positive response...
  
  Thank you very much in advance for helping me understand this labor... I'm really new staff please help...
  
  Thank you

  Looks like you're new to the workforce not planning only.

  Question 1, you can enter data through forms, you can enter data via smart view or the excel add-in, you can load the data directly into essbase data using the rules of charge, charger contour or ODI. You can change the shapes and design them to how you want to watch.

  Dimensions and members are displayed in the forms, you create forms and select which members of the size you want in the forms.
  You will neeed to create members first before you create with them in the forms.

  I'm not sure I understand the question 3, if you want more rows/columns you add more members or use a function such as descendants (membername)

  I would suggest really you a reading of the planning admin documentation before moving on market work or training for planning.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• The workforce plan

  I created a planning application classic with the type of labour. But I found no artifacts in the new type of created effective plan. My version is 11.1.2.3.

  Hello Cheney,

  After you have created the app have initialized the app?

  You would need to go the app, then-> Administration-> Application manage Applications, click actions and then initialize. Post that you will be able to see the forms and the plantypes.

  HTH,

  Vikram

• character set and the capacity planning

  Hello and happy new year everyone!
  
  A question again:
  
  How the impact encoding charset (e.g. UTF8, WE8MSWIN1252. etc.) on the storage space uses?
  
  I would like to a planning capability for a large DWH with 10 TB of data that grows to about 1 teaspoon per year.
  
  Thanks in advance,
  
  Concerning

  Please visit http://docs.oracle.com/cd/E11882_01/server.112/e10729/ch2charset.htm#i1007681

  All your questions will be answered.

  Happy new year.
  ------------
  Sybrand Bakker
  Senior Oracle DBA

• Data loading Date and text in the workforce planning?

  Hello world
  
  I have a need to make an annual charge of HR planning (labor) data. I don't know how to retrieve columns that have text (function, for example) or a date (for example, start_date) in planning, or even if I can do it.
  
  We on 11.1.2 planning & FDM
  
  Kind regards
  Robb Salzmann

  Yes, you can load no doubt about text, date information using the charger of outline, the same logic applies if you use ODI so that uses the same base as the shipper of contour elements.

  See you soon

  John
  http://John-Goodwin.blogspot.com/

• Formula 'Status' of workforce planning

  In the workforce planning, the formula of 'Status' has a few lines that don't make sense to me. I wonder if anyone knows what this code is trying to accomplish.
  
  Here's the formula of Member:
  
  IF (@ISDESC ("new employees"))
  IF ('BegBalance'-> 'Start month'! = #MISSING)
  IF (0 == 0)
  IF ("Cal-TP-Index" > = 'BegBalance "->" Start month')
  'Status' = 1;
  ENDIF
  ELSE IF (("BegBalance"-> "Démarrer le mois"-0) > 0)
  IF (' Fiscal TP-Index ' > = ('BegBalance "->" start month' - 0))
  'Status' = 1;
  ENDIF
  ELSEIF ("Fiscal TP-Index" > = ('BegBalance "->" start month' + 12-0))
  'Status' = 1;
  ENDIF
  ENDIF
  ON THE OTHER
  
  In the third row, the code seems to say... "If zero is equal to zero. This section is followed by two ELSEIF clauses. When no one would be NOT equal to zero, and how these ELSEIF clauses would never run? Am I misinterpreting the code?
  
  Thank you!
  -Jake

  Hey Jake,

  Take a look at page 81 in the Admin of workforce of 9.3 Planning Guide at:
  http://download.Oracle.com/docs/CD/E10530_01/doc/EPM.931/wfp_admin.PDF

  I'm guessing that you are looking at the formula in Essbase and not in the planning. Planning, we should have something like
  If ([FiscalOffset] == 0)...

  As part of planning for deployment to Essbase she changed to reflect the shift of January based on a fiscal year not starting in January.

  Please let me know if you have any other questions.

  Kind regards

  John A. Booth
  http://www.metavero.com

• What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Microsoft Flight Simulator X

  What file or a setting in the game engine automatically starts when you choose a plane, the engines are already started on the track.

  Thank you

  Nick Satullo

  E-mail address is removed from the privacy *.

  Original title: Flight Simulator X

  Hi Nick,

  Please post your request in the Microsoft Flight Simulator forums and it would be better suited to the community of players for Windows. Please visit the link below to find a community that will provide the support you want for better assistance.

  http://support.Microsoft.com/GP/games-for-Windows

• I need the English version of Photoshop and Lightroom.  The problem is that I live in Barcelona in Spain and Suffolk, Virginia.  My Bank and credit cards are all in the USA. How can I set up the plan of photography.  I want to pay the price of the English

  I need the English version of Photoshop and Lightroom.  The problem is that I live in Barcelona in Spain and Suffolk, Virginia.  My Bank and credit cards are all in the USA. How can I set up the plan of photography.  I want to pay the price of the English version.

  Hi Larry,

  I see that you have you have a creative with email even cloud as with forums account and some countries such as the Spain.

  To order the creative cloud with a credit card the United States, you must have an Adobe ID with United States in your country.

  The country store & the Adobe ID, payment details must be same.

  For tax reasons, it is not possible to change the country associated with an existing Adobe ID. To work around the problem, you can create a new Adobe ID to the e-mail address associated with your existing Adobe ID see the link for instructions:

  Change the country associated with your Adobe ID

  If you wish to contact our support group for assistance, please visit this link: (be sure to connect to adobe.com with your Adobe ID first)

  CC_membership-account-payment-support

  Hope this information is useful.

• Workforce Planning - use of generic Dimensions in the variable Designer

  Hi gurus
  
  I am currently working on an application of workforce planning.
  
  I'm working on a script by transfer of an employee to a cost center to an entity in another Centre of cost in an entity.
  
  I then go to variable designer to modify the variables 'DepartmentFrom' and "DepartmentTo", in the hope of seeing the Dimension cost center and entity
  
  Then, I discovered that I can't select a generic dimension, in which my dimension 'Cost Centre' is a generic type.
  
  Only the standard types are available; Account, currency, entity, period, script, Version, year.
  
  Is it possible that I can make a generic dimension available when selecting the dimension type in the variable Designer?
  
  Please help, this may affect my dimension model in my application of workforce planning.
  
  Thank you!

  You can create the Variables to the application or database level instead of create Global Variables.

  At the level of the application or database, you will get the option to select the dimensions of the custom in the Variables.

  Kind regards
  Malezieux

• all the people of the Hyperion have access to salary information in Workforce Planning

  Most workforce planning applications store the names of employees and their salaries.
  However, a friend of consultant very known/seasoned categorically stated that private employee information not be loaded in planning / Essbase. It suggests that we should explain to lawyers in our HR and legal department, what we try to do and most likely they will not allow the information private to be exposed to Riverbed managers and planners. He says that even the names of the employees are not planning / Essbase, we should charge them as employee1, employee2 etc. Only HR should have the real names of the employee1... employee5000.
  
  Anyone can weight with their opinions as to whether it is a good idea to store salary information in Essbase? A simple mistake in the Essbase security implementation could expose pay for bad budget managers. In addition, all the people of the Hyperion have access to salary info. Is this 'kosher' with companies in the United States?

  Essbase Fan,

  I can speak only from my experience and I've been in the private, public and not for profit. Employee and salary information usually remain within the pay system. I don't think it's if the data longer in Essbase specifically as the users who access Essbase as you had mentioned on security.

  In addition also the Essbase administrator would have access to all salary information. So the question arises is the Essbase administrator and payroll the same people? If this isn't the case, you have now more than one person with knowledge of sensitive information.

  Loading data as ' employee 1' with salary 5000' is not really hide the data because the specific planners are likely to pine point by the amount. "

  What we do when we analyze the salaries one transactional and OLAP (essbase) methods is to summarize information on the salary by office and send to the analytical tool. In this case the sum your salary by office/division/region information, and then import into Essbase to do your analysis of planning in this way.

  Although it shows how each office has he can't pin wages highlight what makes each person.

  JTS

• Satellite L830 Screensaver and the power Plan does not activate using Win 7

  I have a new L830 Satellite with Windows 7 Home Premium (x 64)
  My problem is the same if I set the power plan and screen saver that they refuse to activate.
  All suggestions will be welcome.

  Mike Wallis

  To be honest I have never heard of this problem.
  Provided your laptop with preinstalled operating system or you use a clean install?

  You need to change the power management Windows (balanced and high-performance, energy-saving)?

  The whole story is a bit strange, and to be honest, Toshiba has nothing to do with it. Two of them are part of the standard options of windows.

• How to set up the Intel Graphics = battery / AC Power = nVIDIA GPU?

  Right, so I formatted my laptop and reinstalled all the drivers Lenovo stocks to avoid headaches

  I'm on a High Performance plan for the moment

  What I want to do is... set the plan of the High Performance always use the nVIDIA GPU if I was connected to the power adapter or battery.

  I also want to set the balanced plan to use the GPU nVIDIA while on AC power, but go to the Intel graphics card when I use the battery

  How can I configure it that way?

  Thank you

  Never mind, I just realized I can simply press the button located on the right side of the laptop to switch between graphics chipsets

• Accelerometer reading is not being updated smoothly when you move your device on the left to right or right-left in the Horizontal plane

  I'm developing an app for BB 10 devices using the accelerometer. I tested on a BB 10 Dev Alpha device.

  When I move the camera in LANDSCAPE MODE on the left to right or from right to left direction in the Horizontal plane, the accelerometer readings are not updated day smoothly as they do in other directions.

  In addition, the update in the Vertical plane is not as by expectations, is not through with Android, Iphone or other blackberry devices.

  I even checked BlackBerry example project of the accelerometer. It has the same problem. Has anyone else facing the same problem? Is there any solution for this?

  Accelerometer reading is not updated because the example provided on github at this rate of accelerometer is set to very high. code: ACCELEROMETER_RATE = 25000 which is high. As directed by their document

  Is the rate at which the data from the updates of the material. The rate of update of the material
  is defined below using sensor_set_rate. If we set this to 1000, then it properly updated and gives the readings that we arrive on the java BB device.

  Replace the code: ACCELEROMETER_RATE = 1000, then it updates corretly.

• BlackBerry smartphones set up the e-mail on my 9320

  Hello

  Please bear with me, I need help to set up the service message on my phone, I get the message that there is no message services configured then I am redirected to establishing assistant who shows a PIN and no active account, then ask my email and password activication, where can I find it? I use Vodafone with EA Mobile 4 G Wifi,

  Hello and welcome to the community

  You must enter any of the configuration section 'Enterprise '. Rather use the BB exclusive services (including the ability to Push email, BBM, etc), you must have an adequate data of your carrier plan. Carriers BIS (BlackBerry Internet Service) host for their BB users. In general, BIS is not available through generic data plans. Several ships make stop what is needed the Blackberry data plan. Whatever they call it, it is the carrier that delivers BIS users of BB - contact - the for assistance. Once you have an email Push-enabled compatible BIS data plan on your BB (fees regardless of your carrier will charge, btw), your exclusive services BB will work (for example, you will have a staff/Internet Email added to the email Setup Wizard, your BBM will work, etc.).

  With hundreds of carriers in the world, each with dozens of different data plans it is impossible to say that any plan service could actually expressly provide for. Only carriers can answer this question. The best thing to do is to decide what services you want and then talk to your carrier about obtaining a data plan that allows what you want (to them).

  Good luck!