character set and the capacity planning

Similar Questions

• Character sets during the upgrade from 9i to 11 g

  Scenario of
  =====
  Oracle 9i Enterprise Edition (9.2.0.8)
  Windows Server 2003 (32-bit)
  --- to ---
  Oracle 11g Enterprise Edition (11.2.0.3)
  Windows Server 2008 R2 Standard (64-bit)
  
  
  
  Hi Experts
  
  I am a (32 bit) 9i upgrade to 11g (64-bit) and I tried to understand the character of the next Oracle doc sets section. http://docs.Oracle.com/CD/E11882_01/server.112/e10897/install.htm#BABCABAC
  
  I did a SELECT * FROM NLS_DATABASE_PARAMETERS; Here's the result... I hope to keep my current character sets in the new 11 GR 2, this will be possible? I'm risking error asking if I change my character sets, especially 32-bit to 64-bit? Thanks for all your contributions.
  
  
  
  VALUE OF THE PARAMETER
  ------------------------------ ----------------------------------------
  NLS_NCHAR_CHARACTERSET AL16UTF16
  NLS_CSMIG_SCHEMA_VERSION 2
  NLS_LANGUAGE AMERICAN
  NLS_TERRITORY AMERICA
  NLS_CURRENCY $
  NLS_ISO_CURRENCY AMERICA
  NLS_NUMERIC_CHARACTERS.,.
  US7ASCII NLS_CHARACTERSET
  NLS_CALENDAR GREGORIAN
  NLS_DATE_FORMAT DD-MON-RR
  NLS_DATE_LANGUAGE AMERICAN
  
  VALUE OF THE PARAMETER
  ------------------------------ ----------------------------------------
  NLS_SORT BINARY
  NLS_TIME_FORMAT HH.MI. SSXFF AM
  NLS_TIMESTAMP_FORMAT-DD-MON-RR HH.MI. SSXFF AM
  NLS_TIME_TZ_FORMAT HH.MI. SSXFF AM TZR
  NLS_TIMESTAMP_TZ_FORMAT DD-MON-RR HH.MI. SSXFF AM TZR
  NLS_DUAL_CURRENCY $
  BINARY NLS_COMP
  NLS_LENGTH_SEMANTICS BYTES
  NLS_NCHAR_CONV_EXCP FAKE
  NLS_RDBMS_VERSION 9.2.0.8.0
  
  21 selected lines.
  
  Published by: 940854 on October 29, 2012 23:36

  PL indicate how you plan to upgrade. If you are about to upgrade directly on-site using DBUA scripts or migration, the characters will not change as part of the upgrade. The character set can be changed if you create a new 11.2.0.3 empty database and then perform an upgrade via export/import.

  Oracle recommends to use the AL32UTF8 (http://docs.oracle.com/cd/E11882_01/server.112/e25494/create001.htm#ADMIN13343) characters, but if your application does not expect never to use any characters that do not appear in US7ASCII, you can continue to use this game.

  HTH
  Srini

• Changing the character set in the database 11G

  Running Windows 2008 Server 64-bit and Oracle 11 g (V 11.2.0.1.0). I would like to change my default character set when installing from 11 G to CS AL32UTF8.
  
  I read the utility Guide and Guide Support for globalization (http://docs.oracle.com/cd/B28359_01/server.111/b28298/ch11charsetmig.htm#g1011430), but none of these documents shows how you can effectively change everything / the character set of the migration. I would do this using the export and import utilities since this seems to be the most popular recommendation. But I'm really not sure of the procedure to follow to change the CS. For example, should I first export and then import then run the CSCHANGE script that is described in the globalization support Guide?
  
  I would be grateful any guidance on how to actually change the character set to AL32UTF8 and all documentation that explains not only the concepts, but the STEPS of HOW this can be done. Thank you, J

  Salvation;

  Please see:

  Change the character set of database - a brief overview Doc ID: 225912.1
  The National character located in Oracle 9i, 10g and 11g Doc ID: 276914.1
  Change the character set of database - definitions valid superset Doc ID: 119164.1

  Respect of
  HELIOS

• Find the character set of the export dump file

  I have a dump export, I don't have the log for this export dump file. How can I check the character set, as it had been exported?

  878226 wrote:
  Connected to: Oracle8i Enterprise Edition Release version 8.1.7.4.1 - Production
  With the partitioning option
  Jserver version 8.1.7.4.1 - Production release

  Export file created by EXPORT: V08.01.07 by conventional means

  CAUTION: objects have been exported by IN, not by you

  import in WE8ISO8859P1 NCHAR character set and WE8ISO8859P1
  export server uses UTF8 NCHAR (possible ncharset conversion) character set

  As a result, UTF8 here is the character set used? Is - this ri8?

  Yes that's correct.

• Is it possible to set the character set to the instance level?

  Hi all
  
  I have some confusion.
  
  means my database character set AL32UTF8.
  
  and I want tio character set of instance is WE8MSWIN1252
  
  He is liable to set the character set to the instance level?
  
  Please answer Yes or no and why?
  
  
  
  
  Thank you and best regards,

  Instance is memory process structure and background.

  Character set is for the data and the data is stored in the database that differentiate the instance.

  So the answer is no.

  Kind regards
  Teymur Hajiyev
  Oracle 10g certified master
  http://Teymur-Hajiyev.blogspot.com
  http://DBA.AZ

• character set and block corruption

  Hi master,
  
  It is not a kind of question, but a discussion...
  
  I would like to know how we can find the character set of database with dynamic display (under Oracle 10.2)? can we change after the installation of the database of characters?
  
  in fact I was facing a problem when you import a .dmp file...
  
  
  I was importing a dmp to oracle oracle 10.2 10.2 but the character set is different, so importation has not been started, he said possible character set conversion...
  
  and another topic is very different from the previous... What are the causes of corruption block?
  
  So what is the solution for this? I searched the net and got "try the new export file error or a State to support."
  
  and what is the difference between NLS_NCHAR_CHARACTERSET and NLS_NCHAR_CHARACTERSET? and how they affect datbase internal operation?
  
  any suggestion is appreciated
  
  
  Thanks and greetings
  VD
  
  Published by: vikrant dixit on March 3, 2009 04:11
  
  Published by: vikrant dixit on March 3, 2009 04:19

  Hello..

  ALTER DATABASE SET of CHARACTERS ?;

  From metalink
  >
  This note defines the character combinations that are valid for the
  "ALTER DATABASE CHARACTER SET xxxx;" command that can be used in Oracle
  8i and 9i.

  In Oracle 10 g Cslater script should be used to perform character set conversion.
  Csalter depends on CSSCAN to work. >

  Go well with

  1. change the database character set or National character set of the database (for 8i/9i)
  DOC - ID: 66320.1 I

  2. for 10 g

  Installation and configuration of CSSCAN 10 g and 11g
  DOC - ID: 745809.1

  3. change the character set of database - valid superset definitions
  DOC - ID: 119164.1

  HTH
  Anand

  Published by: Anand... on March 3, 2009 18:45

  MEtalink DOC added id

  Published by: Anand... on March 3, 2009 18:48

• Character set for the words

  Hello

  Does anyone know what charset LPX uses for the words when you export a project at noon?

  I have set in Hungarian language of OS X. The correct character set for the Hungarians should be ISO-8859-2 (Latin 2), yet when I export a logical project that uses these words at noon, the external drive is not displayed correctly the

  That is to say. o is displayed as Ăł or similar, any set of characters I use in other software

  P. S.

  I submitted a bug report, as this seems to be a bug, but there was no reaction yet on the report

  PS.

  Never mind, I just realized the character encoding used is UTF-8

• Difference between file system capacity and the capacity of the disks in Capacity Planner reports

  Hello

  I had to go on my Capacity Planner tool training soon, but I have a question on the front that frustrates me. In the evaluation report that comes out of the tool after the analysis, a use of disc section, which lists all the servers for analysis there. A column of this report is directed to file system capacity, another disk capacity. In all cases, the first is less than the latter. What is the exact meaning of these labels?

  Some of the numbers differ substantially between the columns, for example 20 GB for a capacity of 36 GB of disk space for a server and file system. He said that only 20 GB to 36 GB disk is formatted/partitioned to use?

  As previously stated:

  Disk capacity is 36 GB - physically, there are 36 GB of storage.

  File system is logical capacity - the amount of space used by files on the disks.

  File system and the capacity of the disks will never match because fees General table of file.

  I hope this helps.

  -abe

  INTEGRITAS!

  Abe Lister

  Just a guy who likes to virtualize

  ==============================

  Won't lie. I like points. I mean, if something useful for you, consider slipping a few points for him!

• How to interpret the data cache setting and the current value of data cache?

  How to interpret the data cache setting and the current value of data cache? We found that even, we configure a larger data cache in Essbase 2 GB for example, the current value of the data cache is always much lower. Does that indicate an activities of data at very low recovery or something else?
  
  Thanks in advance!

  Hello

  When a block is requested, Essbase searches the data for the block cache. If Essbase is the block in the cache, it is immediately accessible. If the block is not found in the cache, Essbase in the index for the appropriate block number and then uses the index of the block entry to retrieve from the data on the disk file. Retrieve a block requested in the data cache is faster and therefore improves performance.

  So as you say that its current value is much lower then % is very low, that a requested block is in the cache of Essbase data.

  Hope that respond you to the.

  Atul K

• Satellite L830 Screensaver and the power Plan does not activate using Win 7

  I have a new L830 Satellite with Windows 7 Home Premium (x 64)
  My problem is the same if I set the power plan and screen saver that they refuse to activate.
  All suggestions will be welcome.

  Mike Wallis

  To be honest I have never heard of this problem.
  Provided your laptop with preinstalled operating system or you use a clean install?

  You need to change the power management Windows (balanced and high-performance, energy-saving)?

  The whole story is a bit strange, and to be honest, Toshiba has nothing to do with it. Two of them are part of the standard options of windows.

• Recommendation of the capacity planning tool

  Anyone have any suggestions about a good capacity planning tool?  Aware and some exposed to the CapacityIQ and vKernel and reflected on the operations of vCenter.  Someone at - it experience with VMTurbo or SolarWinds?  Thank you

  I would also like some the best analytics that I saw in the treatment of pre-virtualization capacity planning through immune in the mix - as long as the ongoing capacity management.

• Speed max and the capacity of RAM of Pavilion dv6

  Hi guys,.

  I don't know, you have been asked before, but each post I find little answers my question, but not exclusively:

  What is the maximum speed and the RAM capacity can put in my Pavilion dv6 (Beats edition)? Completely factory standard

  I want the fastest and most large amount of RAM I can get (I'll make heavy photo editing) and then I put a SSD in as well?

  HP Pavilion dv6 Notebook PC

  Windows 7 Home Premium 64-bit Service Pack 1

  Intel Core i3 - 2330 M CPU @ 2.20 GHz

  RAM:

  Slot 1: 2 GB SODIMM Hynix 1333 MHz

  Slolt 2: 4 GB SODIMM Samsung 1333 MHz

  Radeon (TM) HD 6490 M

  Motherboard: 17F9 10.5 A

  BIOS: F.1B

  Sincere greetings

  Justin

  You are the very welcome, Justin.

  Yes, that's correct. 2 x 8 GB PC3-10600 memory.

  Memory will not run any more quickly than the FSB of the processor. Your CPU FSB is 1333 MHz.

  For example: If you have installed 2 x 8 GB PC3-12600 (1666 MHz) memory, he would go only to 1333 MHz.

  I don't think that there is no outside but except DDR5 memory in video cards.

  But you can not mix DDR memory types, because they work with different voltages and the notches are cut at different places on DDR, DDR2, and DDR3 memory modules to prevent someone to install the bad memory in the PC and damage memory, motherboard or both because of the different voltages they run on.

  Best regards

  Paul

• Setting up the workforce planning

  Hello
  
  We have an obligation to put in place a planning that is a requirement of the day 2 of the workforce.
  
  1. can create a normal planning application and then convert it to a workforce planning? If so, how?
  2 have we not create a separate Plan with the workforce planning selected type when creating the application, implement the planning of labor?
  3 Prereqquisites for the manpower planning?
  
  Help, please

  Hello

  1. can create a normal planning application and then convert it to a workforce planning? If so, how?
  Rep. : you can have a separate planning application and customize it to planning by creating your own labour
  dimension custom as an employee etc. But you cannot convert in workforce planning that comes with the installation of vanilla from planning.

  2. don't we have create a separate Plan with the workforce planning selected type when creating the application, implement the planning of labor?
  Rep. : You don't have to create the type of separate plan for labour. When you select labor during the creation of the planning application
  and initialize after the creation of the app, it will automatically create the actual cube plan type or of the active population of Essbase for her.

  3. prerequisites for the manpower planning?
  Rep. : No configuration required, you can see the workforce_admin guide to learn more about the workforce planning.

  Thank you
  Sourabh

• Location of Composites of the EBS and the deployment Plan generator

  Hi all
  I have a question of high level on the AIA.
  I understand that a PIP (process integration Pack) is an integration of end to end into the information system from one end to the other. If the names of a pip could be:
  SAP for integration of Ebiz invoice
  Ebiz integration Portal invoice
  Etc.
  I also understand that a BSE (Business Enterprise) is a reusable service that can be invoked by a number of different applicants. For example, InvoiceEBS, etc.
  My understanding is that an EBS can be part of many glitches.
  
  I worked through the update and I got to the point of using the deployment Plan generator to generate a deployment plan. When you run it I came across this message:
  [java] EBS composites should be under $AIA_HOME/pips / < projectCode > or $AIA_HOME/pips / < projectIndustry > / < projectCode > for the seeds of the industry.
  [java] The CBA and the AdapterServices must be under $AIA_HOME/services.
  
  That said, it is expected that the composite EBS under the directory of a PIP in particular. This means that if SAP_to_Ebiz_Invoice_Int and Portal_to_Ebiz_Invoice_Int use the same EBS then composite EBS must be duplicated in the two directories. This is clearly wrong that we would have to keep several copies. (This has implications for maintenance, Version control, etc.)
  
  It is not sensible, so there must be an error in my logic. Does anyone know where I have gone wrong?
  Oracle expects that in a few years when we need to make an update to BSE or other objects in the PIP as go us back and use the same project in PLW or should we create a new project in PLW and add all objects?
  
  Thank you
  Robert

  Robert,
  I checked with the genius of the FP and it comes to new behaviors introduced with 11.1.1.4 that I wasn't aware of the institutions. I have recorded a request for internal improvement because I think that it is not ideal for the clients of the FP.

  It seems it must be under $AIA_HOME/pips /, where is the code that you have entered in the PLW and you would also find in the BOM.xml. Have you tried both?

  Just to make sure that I understood: the error means only that RFP generator cannot find the composite and, therefore, can not assing a path to the composite in the DP and you will need to add that manually. Or is the generation of DP even stop alltogether?

  Gerhard

• Character constants and the color constants

  There are many useful character constants,

  but sometimes (if English is not the mother tongue) is not easy to guess what it looks like on the device

  is there anywhere a document showing the visible result of all character constants, or can I do it by myself?

  even for constant colors - is there a document where you can see how would resemble a color?

  For character constants, you can look at the code published by the Unicode Consortium tables. They have an alphabetical list of all Unicode characters to http://www.unicode.org/charts/charindex.html. Each character links to the appropriate code chart.

  Alternatively, there is a nice searchable data base of characters at http://www.fileformat.info/info/unicode/char/search.htm. Just type the name of the character (without the features of underscore) as it appears in the documentation of the api for the characters.

  A web search for "html color table" shot to the top of http://www.devguru.com/Technologies/html/quickref/color_chart.html, which shows the HTML colors by name.