Setting up windows xp as a server desktop and by linking a laptop Windows 7 via linksys E2000
I have a Dell Inspiron desktop on windows xp computer. I just plugged by ether net to a Linksys E200 wireless router. I was able to get my wife to recognize the router's cell phone and take the line with two computers (desktop via ether net, wireless laptop). My problem is: I can't do both at the network as a whole if I can use the office as a shared print server (USB Canon Mp170 printer). I am licensed and cannot afford to buy a wireless printer just for the laptop, so I would like to make this work. I tried the dell networking tool, I tried windows networking and they are not "see each other... any ideas?
Hello
You must configure the printers to share on the XP computer and install the drivers for the printer as a network printer on other computers using the correct version for each computer.
To set up sharing system.
Win7 when configured on the peer-to-peer network has three types of configurations of sharing.
Group residential network = only works between Win 7 computers. This type of configuration, it is very easy to entry level users to start sharing network.
Working network = fundamentally similar to previous methods of sharing that allow you to control what, how and to whom the records would be shared with.
Public share = network Public (as Internet Café) in order to reduce security risks.
For the best newspaper of the results of each computer screen system and together all computers on a network of the same name, while each computer has its own unique name.
http://www.ezlan.NET/Win7/net_name.jpg
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq.html#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
------------------------------
Win 7 networking with other version of Windows as a work network.
In the center of the network, by clicking on the type of network opens the window to the right.
Choose your network type. Note the check box at the bottom and check/uncheck depending on your needs.
http://www.ezlan.NET/Win7/net_type.jpg
Win 7 network sharing folder specific work - http://www.onecomputerguy.com/windows7/windows7_sharing.htm
Vista file and printer sharing - http://technet.microsoft.com/en-us/library/bb727037.aspx
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspx
Setting Windows native firewall for sharing XP - http://support.microsoft.com/kb/875357
Windows XP Patch for sharing with Vista (no need for XP - SP3) - http://support.microsoft.com/kb/922120
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-------------
If you have authorization and security problems, check the following settings.
Point to a folder that wants to share do right click and choose Properties.
In the properties
Click on the Security tab shown in the bellows of the photo on the right) and verify that users and their permissions (see photo below Centre and left) are configured correctly. Then do the same for the authorization tab.
This screen shot is to Win 7, Vista menus are similar.
http://www.ezlan.NET/Win7/permission-security.jpg
The Security Panel and the authorization Panel, you need to highlight each user/group and consider that the authorization controls are verified correctly.
When everything is OK, restart the network (router and computer).
* Note . The groups and users listed in the screen-shoot are just an example. Your list will focus on how your system is configured.
* Note . There must be specific users. All means all users who already have an account now as users. This does not mean everyone who feel they would like to connect.
---------------------
* Note. Some of the processes described above are made sake not for Windows, but to compensate for different routers and how their firmware works and stores information about computers that are networked.
Jack-MVP Windows Networking. WWW.EZLAN.NET
Tags: Windows
Similar Questions
-
Just set up a Win 2 K server 8 and trouble with FTP.
FTP on windows 2008 serverJust set up a Win 2K 8 Server and have trouble with FTP. FTP and IIS roles are installed and port 21 is open on the firewall but still can't connect. Any suggestion would be appreciated. Thank youHello Spacekowboy
If the suggestions of the Ing. Ladislav Cermak do not work then repost it please your question in the Windows Server forums from the link below. Thank you.
http://social.technet.Microsoft.com/forums/en/winservergen/threads
-
On my desk, I configure printer sharing, but it cannot add my laptop.
I can use internet from my laptop using the network but no printer?
Any help would be really appreciated
Thank you
Ray
Hi Ray,
We would like to know more about details to help you better.
(1) what happens when you try to print by using the shared printer from your laptop? You get the error message?
(2) is the shared printer is detected on your laptop?
(3) what happens when you try to add the printer to your laptop?
(4) have you enabled file sharing and printing on your laptop?
(5) did you share the printer on the network?
(6) you are able to print from the desktop?
You can view the steps in the link below and then check if it works.
Share a printer
http://Windows.Microsoft.com/en-in/Windows7/share-a-printer
Write us with the details asked so that we can understand the question better to help you.
-
I currently run a personal use license of Illustrator CS3 on windows XP on dell desk top and AComputer dell laptop > high Dragon died and the xp is on its last breath, I upgraded to na mini apple mac and one Apple top pro tour. the two run the parallel software with windows 8.1 for any substance of windows ole I still need, I tried to install the illustrator software, but as I am still registered with older machines and the limit is 2 PCs, can't do the software to load. We know how to unregister my existing machines for me to migrate software to my new machines. Keep in mind on computer, portable said is completely dead
Thank you
with support of chat line, they disabled the existing records, directed me to a download site for CS 3 software I have loaded and was subsequently able to activate using the original serial number.
Thank you
JOHN
-
I have a Windows XP desktop PC. I also have two laptops. I can connect to the internet via laptops via my wireless router, but I can't connect to internet via desktop even when it is plugged directly into my DSL modem. I replaced the Ethernet cable, nothing helps. My status of connection to the Local network on the desktop shows little or no connectivity, but I've done all the troubleshooting procedures, (including / Release ipcong & ipconfig / renew) cause a message saying: unable to contact your DHCP server. Any thoughts on how to solve this problem?
What's your DHCP enabled router wireless
If yes then brand IP automatically defined in properties Office lan yor
or try set ip next ip address manually your portable computer ip address serial with the same mask of the subnet and the gateway address.
It can happen when dsektop cannot find the DHCP server
Concerning
Hope this will do the needfull
-
Remember - this is a public forum so never post private information such as numbers of mail or telephone!
Ideas:
- You have problems with programs
- Error messages
- Recent changes to your computer
- What you have already tried to solve the problem
How is your question about the Windows Update feature?
McAfee community forums-online http://community.mcafee.com/community/home ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft
-
Can I run CS6 on the desktop and CS5 on laptop at the same time?
First of all, let me start by saying that I am a small business owner. I'm at work between 10 to 16 hours a day, every day. I have very little time in my life that I'm not sitting at my desk main macintosh, unless I SLEEP.
All my my work files on my desktop in CS5. I intend to continue to use CS5 to all working files for now. I bought only CS6 to backsave.
But I want to LEARN CS6 and work slowly in before making a sudden or dramatic change.
I want to turtorials, and go through the CS6 curve on my laptop. He finds peacfully beside me, every day. No downtime, I can play, learn and experiment. Without fear of doing any harm to my CS5 files or my mac of main production.
If I try to run CS5 on the desktop and CS6 on the laptop, at the same time - they CALL HOME, STOP, FREEZE, LOCK UP, or and send me, in any form and to ADOBE PRISON or ABUSE CENTER?
Someone has an answer for this?
Yes, I have the answer. No, nothing horrible will happen.
Bob
-
you are the network administrator for abc.com domain. All domain controllers are running windows server 2000 with the company wants to set up a more secure network server OS the company will modernize the ADS?
Please repost your request in the appropriate in the Windows Server Forum. Thank you!
-
Error in windows after Microsoft sql server desktop engine has been ininstalled
I uninstalled microsoft sql server 2000 desktop engine after I installed sql server 2005 and now when windows ends and goes to the home screen I get errors on these files sqlevn70. RLL, opends60. DLL, atxcore. DLL, sqlmangr.exe could not initialize the property (0xc0000142)
My system info Advanced says on May 5, the Description of the Source (service control manager) (timeout (3 000 milliseconds) waiting for service MSSQL$ MICROSOFTSMLBIZ to connect.) Service MSSQL$ MICROSOFTSMLBIZ didn't start or control request in a timely.Then the CD-ROM driver has detected an error in the controller on \device\cdrom0. Then he repeated the process again and again until the app.management is completed with the following error. The specific module could not be found. Microsoft Antimalware has encountered an error trying to update signatures. New Signature Version: Previous Version of Signature: 1.149.1260.0 updated Source: Microsoft Update Server Update step: Source path of research: http://www.microsoft.com S ignature Type: service MSSQL$ MICROSOFTSMLBIZ could not start due to the following error: service has failed to demand launch or control in a timely. Type of update: full user: NT AUTHORITY\SYSTEM current engine Version: previous engine Version: 1.1.9402.0 error code: error 0x8024402c description: an unexpected problem occurred when checking for updates. For more information on installing and troubleshooting updates, see Help and Support.Timeout (30000 milliseconds) waiting for service MSSQL$ MICROSOFTSMLBIZ to connect. Service MSSQL$ MICROSOFTSMLBIZ could not start due to the following error: the service did not demand launch or control in a timely.Hello
I suggest you to ask your question on the TechNet Forums.
http://social.technet.Microsoft.com/forums/en-us/category/SQLServer
I hope this helps.
-
original title: file and printer sharing problem
I can't set up file and printer between my laptop and desktop sharing, both running Vista Home Premium. The printer is connected to the desktop computer that is connected to the router. The laptop is wireless. In network and sharing center when I do a "view full map", both computers show, but one that I'm not on (either way) is indicated by a line broken instead of solid, and I don't see any info on it on
Hello
What exactly happens when you click the icon of the computer on the network map? You get the error message?
If possible after return the screenshot of the network card that could help us help you better.
See the bottom of the articles that might help you resolve this problem.
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Troubleshoot file and printer sharing
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing
File and printer sharing: frequently asked questions
http://Windows.Microsoft.com/en-us/Windows-Vista/file-and-printer-sharing-frequently-asked-questions
Use the network adapter to manage and troubleshoot networked devices
-
setting up windows for the server pop3 or imap Charter of Kalamazoo messaging
Charter of the server pop3 or imap to Kalamazoo
need help to set up mail to windows mail
Hello
you need to configure your e-mail account windows mail with your ISP internet service provider
They provide you with account settings you need to do
Ask them to
username
password for your access broadband account / distance with themServer of incoming POP3 mail
outgoing mail SMTP serverand here's how to configure windows mail after getting the email correct account settings
-
Need to set up Windows mail for incoming and outgoing mail server
I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)
I am trying to set up my mail in windows for the first time, can someone please help me with the details of the incoming and outgoing server (pop)
Hey Kim Clement
Contact your ISP (internet service provider).
They offer your broad band/dial-up connection.
Ask them to:
username
password for your access broadband account / distance with them
Server of incoming POP3 mail
outgoing e-mail serverand read this on how to set up windows mail on the microsoft below link
Windows Mail: Setting up an account of end-to-end
Walter, the time zone traveller
-
How to add a Gadget in Windows 7 to display AN image on the desktop and set its size
The slide show in Windows 7 Gadget displays the images to a predefined size.
I want to increase the size of this form, if possible.
If this is not possible, how can I do (add) a Gadget to display a picture on the desktop and set its size.
Thank you in anticipation of some tips.Click with the right button on the desktop background and select Customize,
Click the downstairs desktop background link on the left
Another thing would be edited / Resized in a photo editing program at least the size in pixels of your monitor.
Right-click on your desktop, and then select the screen for your recommended resolution setting resolution / pixel dimensions.
-
HP ENVY 750-175se: stuck on "Set up Windows" - fresh install of Windows 7
Hello
I have a new install of Windows 7 Ultimate 64 bit on my desktop HP Envy. I installed myself, everything went well. However, now when I am setting up Windows (on the screen where it says "Select a username for your account and your computer name to distinguish it from the network"), the keyboard nor the mouse work.
The mouse on the background light is on and both work until I have start Windows (ie. the BIOS) and both are plugged into the USB 2.0 ports. I tried different USB ports around the system, but that did not work at this stage (well that as well the mouse and keyboard worked for the previous points of the facility before the restart brought me to this screen). I tried to disable Legacy Support in the BIOS, but that only returns an error message saying "Boot Device Not Found". I tried another keyboard that I know works on other systems, no difference here. I did research online that some users recommend using a PS/2 keyboard, but there is no port for a on this machine. I'm literally not to penetrate into my operating system, but none of the USB devices work. I've also seen suggestions about how to disable of EHCI or XCHI driver settings Pre-boot in the BIOS but I can't even find those on this BIOS. So maybe someone knows I am missing a setting in BIOS that can help me out here or something? Thank you!
Hello:
Here is what, in my view, the problem is...
Intel has removed support for USB 2.0 chipset chipset Skylake.
This means that only USB or normal DVD installs windows 7 will not work.
Microsoft Windows 7 ISO not the USB 3.0 drivers natives either.
Therefore, add USB 3.0 drivers in Windows ISO. Intel has on it. They have a utility that does all the work for you.
https://Downloadcenter.Intel.com/download/25476/Windows-7-USB-3-0-creator-utility
Run the utility and point your support Installation USB and windows 7 above should install.
There is a readme on the link above for instructions on how to convert your DVD in a bootable usb flash drive.
-
I have an ASP application developed with Interdev 6.0; part of .NET and using the time to design Windows server 2000 controls.
I need to upgrade the application to run on Windows server 2008 and IIS 7.0 ASP. I find some compatibility problems.
The part that I'm stuck at the moment is the creation of objects in the runtime that gives an error.
: "800a01ad" VBScript runtime error
Component ActiveX cannot create objectCode:
Set OF = Server.CreateObject ("DERuntime.DERuntime")
Application("de") = OF. Load (Server.MapPath ("overall. (ASA"),"_private/DataEnvironment/DataEnvironment.asa")The MSDERUN. DLL is properly registered on the server with the correct permissions.
What are the possible solutions outside the upgrade of all of the ASP.net project. ?
Post in the Windows Server Forums:
http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/
Maybe you are looking for
-
I want to keep my albums separate when I move to a flash drive!
How can I keep my albums separated when the flash drive!
-
Inspiron 17R 5720/Windows 8 Wifi
I installed the drivers available in the order appropriate for Windows 8, and he does not even as an option on the new settings. FN/F2 toggle Bluetooth, and I get the same notification icon that I had on Win 7 Wifi turn power on and off. I guess we e
-
Smartphones blackBerry how to move everything to one BB to another?
I have a 8520 and looking at goes a Bold 9900. I have four sons of my phone e-mail account, more texts, etc. I want to spend all THE e-mails and folders from the e-mail to the other account. A year ago, I had to do this as my old 8520 died, but the t
-
Hi guys,. Small question. Recently updated my motherboard, CPU with heatsink. Did a clean format on my SSD and since using this fresh version I get some strange blue screens... I was wondering if someone can make sense of them? Here is a link to the