Setting Windows 8 to automatically update the drivers for your hardware

Similar Questions

• refresh rate... How to update the drivers for the monitor in Vista

  How to update the drivers for the monitor in Vista

  You are welcome.

  Normally, you go to the Web site of the pre-installed drivers.

  But, if you have any problems, andf Forum hardware drivers is the best place to ask.

  See you soon.

  Mick Murphy - Microsoft partner

• ENVY 750-197c: cannot download drivers Win 10? "We have found the drivers for your product...". »

  I just installed Win 10 (64-bit) on my desktop and I want to install/update the drivers on my computer because my internet on it is a little wonky (and in general I want to update the drivers anyway). However, when I go to the page "Software and drivers" and enter my name/type of product, I get a message saying "we have found the drivers for your product. Drivers may be in development, so please check back at a later date or visit the product home page. ». There were drivers available here yesterday. How long this change usually take? Can someone help me find the drivers of the template from another computer that might work for my computer? Thank you!

  Hello:

  It looks like all the drivers, specifications and manuals are missing from the pages of support again.

  This happened earlier in the week also.

  Another Member of the forum has reported the problem to administrators forum, which will be in touch tour HP, but since I am not employed by, nor do I represent HP, I don't know how long it will take to restore the missing data to the support pages.

  Whether the weekend will not help much either.

• This who should I insert for "installation media" interviewed "load the drivers for your hard disks?

  I am trying to repair my installation of Vista Ultimate 64 bit (my system does not boot into Vista at the moment - something wrong).  I am running the recovery by booting from the Vista installation disc in my CD/DVD drive.  When the System Recovery Options screen appears, there is no operating system is displayed.  I wonder to 'load the drivers for your hard disks' by inserting the installation media.  The wizard goes into a mode of navigation, but I have no idea of what he seeks.  The only drive I've delivered with my hard drive, installed months ago and works well so far, doesn't seem to have the type of the file of the search dialog box.  Please help - what is needed to move forward with this repair? Brett Henrichsen

  Download the SATA drivers:

  http://www.ASUS.com/product.aspx?P_ID=ShiLE9XNeuFKwFDC

  "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/

• How to configure Windows 7 to automatically install the drivers, mine is set to never install drivers.

  Ineed to install an audio driver, when I go to do this, I get a message that says my computer / Win 7 is configured to never install drivers. How to change that?

  You don't want to automatically install drivers from Windows Update or another source.

  If you want to update the drivers, do it manually and get them directly from the device manufacturer websites.

  Do NOT use the finders of pilot no more...

• My Windows Vista laptop (dv9000 HP) is unable to update the drivers for the drive DVD-cannot use the device.

  The above mentioned laptop displays error Code 39 in Device Manager. I tried to remove the device and scan for hardware, but not able to download the drivers needed to use the device. Help, please. Thanks to you all.

  Hello

  Thanks for posting in the Microsoft Community Forum, please be assured that we would do our best to help you.

  There are many causes of Code 39 errors in Device Manager:

  a. a required device driver is missing.

  b. a required binary file is corrupt.

  c. There is a problem with the file I/O process.

  (d) a pilot that refers to an entry point in another binary file cannot load.

  The recommended solution is to remove the device and reinstall the drivers for this device. As you have tried this step, I suggest you to try the steps mentioned below and check:

  Step 1:

  Try the fixit mentioned first and check if the dvd player works:

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  Step 2:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  The CD drive or the DVD drive does not work as expected on a computer that is running Windows Vista

  http://support.Microsoft.com/kb/929461

  Step 3:

  Try the steps in the following link and check if the dvd player works:

  Important this section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/314060

  If you have any questions do not hesitate to answer, we would be happy to help.

• I learned that I needed to update the drivers for the following: isatap. (A8155B21-EFDB-4EC7-856F-EE7D24CE44987).

  My Windows Vista (pc HP) has been crashing lately. I managed to install the latest updates with the help of this community, but when checking for errors, I came across the outdated driver (Microsoft network adapters) as indicated above. If I went to the Device Manager and deleted the old driver, could I then update the same drivers by downloading from the Internet? Don't want to try it if I can replace the software safely. Thank you.

  Hello Raine480,

  1. that you get any code or an error message when the system crashes?

  2. are you referring to the Microsoft ISATAP card, if so you can ignore this message.

  Regarding your query, not all drivers will be automatically charged, some drivers are pre configured in the operating system and some must be downloaded.

  The best choice that you make before you uninstall the driver and install them will be to download the driver on the manufacturer's Web site just to be on the safer side.

  Or you can try to update the driver by following the link below:

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly? SignedIn = 1

  Refer

  On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message

  http://support.Microsoft.com/kb/932520

  Also, check the below link to find the necessary drivers for your Vista system.

  http://Windows.Microsoft.com/en-us/Windows-Vista/finding-drivers-what-to-do-when-your-hardware-wont-work-with-Windows-Vista

  Hope the helps of information.

• Windows does not allow me to update the drivers for my Nexus 7 (USB port)

  I'm having a problem connecting my Nexus 7 compressed (version 2013) to my desktop. I've successfully connected to my laptop. The two computers running Win 7 (64).

  When I plug the USB cable in my office, says Windows is to install the device driver software. After a short interval, it pops up a message saying that the software has not been installed correctly.

  So of course I went on Google Nexus web site and downloaded the latest version of the driver and unzipped the file.

  I opened the Device Manager. The Nexus is not listed, but under "Portable devices", it a "MTP USB Device", which I think will turn out to be the Nexus.

  I right click on this point, then "Update Driver Software", then "Browse my computer...". "and"Search for driver software in this place"(and of course, I've come to the place where my file downloaded and unpacked.

  Click "next".

  INSTANTLY, I have "Windows has determined the driver software for your device is up to date. It seems there being no attempt to load the new driver. I maybe trying to load the drivers in the wrong place?

  FWIW, I checked to see if there are group policies that would prevent Windows update drivers, but there is not. I'm not aware of the problems of updating all drivers.

  I even tried to copy the drivers in my laptop, without success. When the Tablet is connected to my laptop (with success), it appears in device under portable devices-> Nexus management, but this does not happen on the desktop.

  This who should I try next, please?

  Hi TRHD,

  Depending on your answer update, I suggest to run the next fixit and check if it helps.

  Diagnose and automatically fix the Windows USB problems

  Please post back your results for assistance.

• Automatically update the drivers via WSUS 3.0 SP1

  Posted November 16, 2010, 15:51

  Hello

  Recently at the company that I work we started pushing updates to the video card driver via WSUS. While users have no problems of installation, we had difficulty to automate the process. Basically, we have 7 computers that are run continuous tests that cannot be interrupted, except for 430 in the morning when they restart. We have a script that does the reset and we try to make these computers to install updates before restarting. I tried WuInstall, Remote X Reboot, this script:http://www.wsus.info...?showtopic=7298 and this: http://msdn.microsof...28VS.85%29.aspx where all work, ideal for installing Windows updates but none of them install updates of the driver as well! The updates appear as high priority and all other updates installed without problem, every single script/program that I use to try to automate the updates says "No update available" even if the Windows Update icon is still there. We tried this on Windows XP and Windows 7 computers and got the same result, we use WSUS SP1 on Server 2008. Any help/link to a program/script would be greatly appreciated.

  Thank you

  Please repost your request in the Forum of WSUS.  Thank you! Carey Frisch

• Wen, trying to update the drivers for the sound. Gets the windows error code 0 x 80070103 update encountered a problem

  Original title: MY VICTORY 8 speakers do NOT WORK

  the pilots, but an error message appears...

  code80070103 windows update has encountered a problem... this help as soon as possible

  Get all your drivers from this site:

  http://www.Dell.com/support/home/us/en/04/product-support/product/Vostro-2520/drivers

• Update the drivers for my HP Pavilion

  I have problems with my HP Pavilion, the p6112p, the NP211AA of office.

  Drivers must be updated on my audio/visual programs, in addition to the general instability; as the gel, etc...  I noticed that you have given information to a person on his computer, where he could get the updates for all components of its specific computer.

  I am not very computer savvy, so I need all the help I can get.

  Thanks for you help with anything that can give me.

  Hi again,

  It seems that your computer is so either little bogged down - I think that we will be able to make it work even better with a few steps.

  Here are things that will help to clear up, and then we'll see how it does later.

  1. empty the Recycle Bin:

  1. From the Windows desktop, double-click Recycle Bin .

• I need help to find a way to correct or update the drivers for two DVDs that I have on my PC. Device Manager indicates that they are missing or have been corrupted, and they are a product of microsoft.

  I tried to play a number of different disc, both DVD players and nothing seem to work.

  Your CD/DVD drive is missing or is not recognized by Windows or other programs:

  http://support.Microsoft.com/kb/982116

  Your CD or DVD drive cannot read or write media - Fix It:
  http://support.Microsoft.com/mats/cd_dvd_drive_problems

• (KEYBOARD ERROR) Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  (KEYBOARD ERROR)

  Windows cannot load the driver for this hardware device because a previous instance of the device driver is still in memory. (Code 38)

  Hello

  I don't know how it happened.

  I tried unistalling the software but have the same problem when connected to e

  Help, please

  Hi Davedirect,

  ·        It's a wired keyboard or a wireless keyboard?

  ·        Who is the manufacturer of keyboard?

  ·        Since when are you facing this problem?

  ·        You did changes to the computer before this problem started?

  ·        Have you tried to restart the computer and check if the keyboard works normally?

  However, you can try to uninstall all the previous and software drivers installed for the keyboard by following the steps below.  More later, restart the computer and install the latest drivers and software and check if that helps you solve the problem.

  Step 1

  Remove the drivers from the computer. To remove the drivers to follow the steps below:

  a. Click Start and enter the type of search box of start of the press and "appwiz.cpl".

  b. in the programs and features window select the keyboard software installed on the computer and uninstall the drivers.

  Step 2

  During the uninstallation, the device in the Device Manager, make sure that you follow the steps below:

  a. Click Start.

  b. access control panel > system > hardware > Device Manager.

  c. open Device Manager and expand the keyboard device.

  d. right-click on the device keyboard and uninstall the device.

  During the uninstallation of the device in Device Manager, make sure that you place a tick against 'delete the driver for this device '.

  Step 3

  Also, you can try to update the drivers for your keyboard from the Device Manager and check if it helps. Access the link below and follow the steps to update the drivers.

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Access the link below to learn more about the error code 38:

  http://support.Microsoft.com/kb/310123

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to update the drivers

  How to upgrade drivers for windows 7?

  Hi John,.

  Thanks for posting in the Microsoft community.

  John, I understand you want to know the method to update the drivers on your Windows 7 computer.

  There are 2 ways you can update the drivers.

  Method 1:

  You can visit the manufacturer of the peripheral site and download the drivers for the model you own. You can then double-click on the file and install the drivers.

  Method 2:

  You can use the automatic update option in Windows to update the drivers.  Visit the link and follow the steps which provides article.

  Update drivers: recommended links

  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links

  You can also check this link for more information.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Let us know if you need additional assistance.

• When can Qosmio F50 - I get the drivers for Windows 7?

  Hello

  do you know if Toshiba drivers for new windows, especially F50 series? I would like to pre-order Windows 7.

  Thank you

  Hello

  I put t know how long it takes until Toshiba going Windows 7 drivers, but you should not forget that Windows 7 is not on the market now, so I think we should be a few weeks or months.

  In my opinion, you can order Windows 7. Most of the drivers for Vista are also working on Windows 7 and you can the pre-test with the Windows 7 RC.
  It s worth a try! ;)