Setup could not initialize - not the same issue as everyone else... ?

Similar Questions

• Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Setup could not initialize - I've lost hours trying to find solutions online and forum... to change the file to add .old - does not work; Open the file 2/2 still didn't work... Help!

  Please see the links below:

  https://forums.Adobe.com/thread/1848277

  https://forums.Adobe.com/thread/2055767

  Let us know, if you still get the same error even after trying it all the steps mentioned

• When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor th detect the problem. "However, when we click on"Get Adobe Support Advisor.

  When we install, we get massage: "we met the following problems. Setup could not initialize. This could be due to a missing file. Please download Adobe Support Advisor detect the problem. "However, when we click on"Get Adobe Support Advisor. It is not to us to show how to solve the problem.

  Hello

  Please see failed to initialize the installation program

  "Installer initialization failed." I have tried everything what it but no dice.

  setup initialization failed

  I hope this helps!

• I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, he says that Setup could not initialize

  Hello. I have download CC and installed the trail of the illustrator of last week, but it disappears all of a sudden, I couldn't find it on my computer and I try to reinstall, but it says that Setup could not initialize. I use win8

  Please see the links below.

  • Error: "cannot install initialize | Windows
  • The Adobe CC Installer failed to initialize [windows OS]
  • Creative cloud Installer fails to boot into OSX Mavericks

  Hope this will help you.

  Kind regards

  Hervé Khare

• Setup could not initialize - DesignStandardCS5.5

  Hi all

  I'm trying to install Adobe Creative Design Standard on an iMAC OSX, running, but I still get the error that Setup could not initialize.

  I tried running the cleanuptools and rebooted, but nothing works.

  I called the Support technique Adobe but says to use the forums to get answers

  Can you help me

  CS6 and previous programs have not been tested and will not be updated to run on Mac El Capitan

  -which means you are trying to use CS6 and earlier at YOUR risk of having problems

  Maybe it's a fake because of Mac El Capitan and OLD programs error

  This information is a MUST to install old programs on Mac El Capitan

  -You can't get the same error message, but here are some links that CAN help with old programs

  Install CS5 on Mac 10.11 https://forums.adobe.com/thread/2003455 can help (also for others than CS5)

  -also a TEMPORARY security change https://forums.adobe.com/thread/2039319

  -http://mac-how-to.wonderhowto.com/how-to/open-third-party-apps-from-unidentified-developer s-mac-os-x-0158095 /

  -the guardian https://support.apple.com/en-au/HT202491

• I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  MSI 4.5 installation problems

  I try to install MSI 4.5 with the windowsXP-KB942288-v3 - x 86 .exe file. I get a lot of messages that Setup could not back up the registry key... 5. access is denied.

  I get this for about 10 different registry keys. If I hit ignore whenever Setup ends, but he told me that he have not installed properly and windows may not work.

  Any body have ideas of how to do to solve this problem?

  Thank you

  I did some further research and came across this http://support.microsoft.com/kb/949377 while it is not the same update I tried to install it, the problem seemed similar. I tried Microsoft fix it at the bottom of the page and I tried again to install MSI 4.5. This time, it worked.

• Error - Windows needs to continue Setup could not be installed during the upgrade to Service Pack 2.

  Original title: computer locked up on upgrade to xp p2.

  I've been upgraded to xp p2 to p1 and the computer gave me a fatal error - one of the components of Windows needs to continue Setup could not be installed - how do this and to the computer.  I tried safe mode, but it kicks me back to the same screen

  Hi jodyjones,

  You can use the automatic recovery feature to recover your computer to its previous configuration. For more information, follow this link & check if it helps.

  How to use the automatic recovery feature to recover your computer or your Tablet PC if the Windows XP Service Pack 2 Setup program is not completed successfully

  
  Reference: installation of the Service Pack 2 (SP2)

  Hope the helps of information.
  Please post back and we do know.

• 5 error message when you try to run gimp - 2.18.16 - Setup could not create the directory

  5 error message when you try to run setup.exe gimp - 2.18.16 after downloading... it reads:
  Setup could not create the directory
  c:\Users\DEBSWO~1\AppDate\Local\Temp\is-IKDP5.tmp ".
  Error5: Access denied
  In the Temp folder under Security I have:
  'SYSTEM' with full control
  "Administrators" with full control
  "Username" with full control
  All of which is listed in the permissions, but the box for'Include the permissions that can be inherited from the parent to this object "below is checked but not really dim so that you cannot check or uncheck the box?"
  The two latest downloads gave the same error message.

  Thank you for your time.
  Debbie

  I suggest you do this:

  1. click on the start planet.
  2. type cmd.exe in the search box.
  3. press on Ctrl + Shift + Enter
  4. click on "run as Administrator".
  5. type the following commands exactly and press ENTER after each:
  takeown /f "%Temp%" / r

  Cacls "%Temp%" / t/c/g "%nom user %": F System: F

  (Enter Y when you are prompted "Are you sure?")

• Windows Setup could not configure Windows on hardware of this computer Installation error on the new hard drive

  Okay so if please bear with me and be patient.  I'm not tech savvy.  I know enough to be able to remove an old hard drive and put another one, but when there are errors, I don't know what to do.

  Here's the situation.

  I have a Dell Studio XPS with Windows 7 installed.  I started having these notifications that my hard drive could be a failure.  I tried everything that I could find to fix it without having to buy a new HARD drive without success.  The current system has a 1 TB Seagate hard drive.  I installed a memory additional bar thingie right after that I got the computer about 4 years ago.  (If someone tells me how to find the properties of real system, I post them if necessary).  Anyway, I bought a new WD 1 TB black disk hard to install before my old dies and loses all my photos and documents, etc...

  I took the old drive yesterday and installed the new hard drive.  I put back the case and turned on the machine.  I put in my Windows 7 installation disc.  He began installing Windows 7... It's completely past the initial screen where it says it to load it and the other... I had accepted the license agreement, but did not have to make a profile and do the work and the reader.  I hope all this makes sense.  Then it pops up this message "installing Windows could not set up Windows on hardware on this computer."  I couldn't figure out what to do from there.  I got the new drive and put the old one back to and here I am. I tried to find solutions to this problem, but I either don't can't make heads or tails out of the responses on the internet or the solution is not exactly my problem.

  Please help if you can!  And if you have any suggestions, please dumb them down so I can understand what to do.  I CAN do if loaded, you just have to not talk too irritable.  Laughing out loud

  Thank you in advance!

  Maybe not...

  The Windows installation is not happy about something, and since it gets at least started which is a good thing, but your installation problem can not really be with Windows - perhaps something about Dell hardware or your 1 TB HARD drive.

  I looked at your system and found this article that you can read to see if it sounds like your original question:

  Windows Setup could not configure Windows on hardware on this computer.

  http://www.Dell.com/support/article/us/en/19/SLN293812/en

  Since Dell has written an article for help on this subject, it means they've met enough times to take the time to compose the article and put it on their WWW site (but, they say, it is a possible resolution).

  Could you take the issue in the Dell online community where experts hang out (especially your amber light).

  Another good place for support is www.bleepingcomputer.com where there is a similar topic as your question (except Vista) on a Dell and a new disk of 1 TB (also a Seagate) and Dell ideas did not work, but someone else has found a way to fix it:

  http://www.bleepingcomputer.com/forums/t/453378/installation-fails-to-complete-on-new-HDD/

  The bleepingcomputer for your error message search reveals other areas and people who have got things to work in different ways, then it is perhaps another place to look for ideas.

  If the installation still fails it would not hurt to do the BIOS setting and see if things are getting longer, and since you are going to write the current settings before proceeding with the adjustment you can always cancel the adjustment if things get worse.

• DirectX on Windows 8 (64-bit) "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ""Setup could not download the file. Please try again later or check the connection to the network. »

  So I tried to get this to work at least for a day now, but whenever I try to launch my new game I'm away I kept getting this error: "your DirectX Runtime is up-to-date. Download and install this file from Microsoft. ' When I was re-directed I downloaded, it opens and clicks on agreed and all this things, but after 10 seconds initialization, it gave me this error: "Setup could not download the file. Please try again later or check the connection to the network. " I checked all that nothing seemed to be wrong, I did it again and again and again. So I just went to a solution or any news for DirectX. So far, no luck.

  I am running on DirectX 11 right now, is if there is a new DirectX or am I a jerk, and that is a different problem? I can't understand it.

  Thank you

  Hello

  Try this link... it's a complete Installer for DirectX Runtime June 2010... This is an optional package that use a lot of games...

  http://www.Microsoft.com/en-us/download/confirmation.aspx?ID=8109

  The file is self-extracting, so take note where extract you it to.

  Open the folder, and then double-click DXSETUP...

• "Setup could not detect all the printers.

  I've recently set up a new computer and the network.  The host computer is running Vista.  I have connected a Deskjet 6940 via an ethernet cable into the Linksys router and can print from the host computer.

  I have a laptop which is under XP Pro, and who has a connection with the network.  I downloaded the driver from HP on the laptop to try to connect with the 6940, but during the install process, I get the message "Printer not found - Setup could not detect all the printers on the network."

  Firewalls on both computers is disabled.

  When I type the IP address in the address of the host computer or on the portable bar, I page of the printer, including its SSID.

  I tried to type the IP address in the field suitable for the installation of HP on the portable routine, however and always got the "printer not found."

  Ideas?  TIA

  The Deskjet 6940 being on the network, we will try to add the printer manually. Here is the sequence to XP:

  1. Click on the button 'Start'--> Printers and fax machines.
  2. Under print jobs, click on "Add Printer".
  3. Click 'Next' in the Add Printer Wizard window.
  4. Select " printer local to this computer. Deselect "automatically detect and install my Plug and play printer." Click "next".
  5. Under Select a printer Port option, select "Create a new port" and choose "Standard TCP/IP Port" and click "Next".
  6. In the "Welcome to the Add Standard TCP/IP printer port Wizard" make sure that the printer is turned on and connected to the same network that your computer is connected to. click on the button "next".
  7. Under "Add Standard TCP/IP printer Port", enter the host name of the printer . You can also use the IP address of the printer if it is static. Click 'Next' and then click 'Finish '.
  8. Now, select HP in the manufacturers list, select your printer from the printer model list and click the button "next".
  9. If you can't find your printer, you will need to find the installation CD and use the 'Disc' option to select one of the files hp*.ini. You can also select another model of the same type HP printer.
  10. Add the name of print spooler and click on "next".
  11. Click "next".
  12. Click "Next" and "Finish."

• I bought adobe photoshop online 14 items. It will not install on my Win 8 64 bit machine. Setup could not initialize.

  Maybe it's a missing file. I tried everything on the support page. Do I have to re - download.

  Hey chigger

  Please see these topics

  Items 13 Setup could not initialize

  First Elements 13 - Installer fail to initialize

  Let us know if this helps

  Concerning

  ~ Assani

• Items 13 Setup could not initialize

  Items 13 Setup could not initialize

  Optimistic almond,

  Do you get any error messages? What operating system do you use?

  Here is information on the download items and links to the files:

  Photoshop elements 13, 12, 11, 10 | 9, 8, 7

  First items 13, 12, 11, 10 | 9

  Here are some links that can help with the installation, if elements:

  Photoshop elements help | Photoshop Elements learning & support

  Troubleshoot installation | Photoshop Elements, Elements first. Windows

  Troubleshoot installation | Photoshop Elements, Elements first. Mac OS

  Troubleshoot installation using newspapers | Elements

  Troubleshoot and resolve installation errors

  Guinot

• Setup could not initialize. That's happened?

  Just purchased Adobe CS6 Design & Web Premium (academic edition) installed.

  Setup could not initialize. Downloaded Adobe Support Advisor to detect the problem, but childless. That's happened? Please advise on how I can install the software.

  If you are using windows, right-click on the exe, and then click "Run as Administrator".

• CS6 InDesign trial download: "Setup could not initialize".

  Hi, I downloaded Adobe InDesign CS6 successfully, using the Download Manager software. When I click on "install", a window appears with a bar ('install Adobe'), progression and the bar gets about 2/3, then I get an error message saying "we met the following problems." Setup could not initialize. Please download Adobe Support Advisor to detect the problem. "Then a link to download Adobe Support Advisor, or button to quit.

  So, I downloaded and ran the Adobe Support Advisor. After initialization, the software only says "no problems found".

  -My machine meets the system reqs for InDesign CS6

  -Of course I tried to restart my computer and run all these steps again. We are still getting the error.

  Help, please! Thank you.

  Thank you, Jeff Wright. I went through my log files, searched errors and found another thread on the support forum that simply directed me to remove a process in my activity monitor.

  For anyone else who has this problem:

  Go to Applications / Utilities / on your mac activity monitor and delete the process "'AAM Update Notifier' or «AAM recording notify»» Then start Setup again. He now works for me.

  Thank you very much!