Several chips debugging

Similar Questions

• Chips debugging in general - help me understand

  Before I try to put a token of debugging on my new camera alpha dev, I want to have a better understanding of some general aspects:

  (1) are the tokens of debugging different BB10 of Tablet OS debug chips?

  (2) can I use the same token for applications WebWorks and AIR apps?

  (3) not my own debugging token allow me to install applications not signed to other develolpers? or if not, peux I push two debug chips on my device? or would I need to pass tokens to load my apps at once personal and professional?

  Thanks for the clarification!

  Anna

  My app: Get set - get up!   Get ready for the revolution snooze.

  (1) n ° a debugging token tells the playbook to allow unsigned applications debugging running token owner. so if your application unsigned for bb10 and your unsigned for tablet os applications contain the same author/authorid in their blackberry files - matching tablet.xml, there is no difference

  (2) Yes, you can, if you use the same author/authorid in both

  (3) No. also, you can have two different developers debugging tokens at the same time, because you are replacing the old one.what you can make is the following: comment out your id of your personal application of the author and add the id of the author of your work around in this way, you can debug your applications to both personal and professional with the same debugging token. BUT you must sign your personal application (in the best of cases) with your own computer, where you have installed your own keys. Do not install your keys on your work computer unless you know how without crushing your working keys

• How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  How to set the name of the author and where I find all of the debug option token during the race or the creation of the application on QNX IDE?

  Here is the error

  Failure of deployment: Info: request shipment: install and launch
  Info: Action: install and launch
  News: Native debugging: on
  Info: File size: 219949
  Info: Installing com.example.UIBB10AppTest1.testDev_B10AppTest15dd51c62...
  Info: Treatment 219949 bytes
  actual_dname:
  actual_id:
  actual_version:
  result::failure 881 the application author does not match the author token of debugging

  The author information is located in the bar - descriptor.xml in the tab "General". But the information must be defined automatically. In addition, you must install the token debug on your device.

  If everything is configured properly there is only one problem that happened to me. I had several chips debugging Momentics. I had to remove all chips debugging and leave alone the I want to use. Perhaps, you have also several debugging chips installed in Momentics. This seems to be a bug in Momentics who can't handle several chips debugging.

• error debugtokenrequest: not yet registered to request debugging tokens

  Hello

  I created several chips debugging manually in the past, but now I have the "error debugtokenrequest: not yet registered to request debugging tokens" error.

  My C:\Users\dev\AppData\Local\Research In Motion folder contains barsigner.csk, barsigner.db and my .p12 files - the p12 file seems fine as I just signed and downloaded an application in draft mode.

  The debugging token request is the same as all the others, I created (just CutnPaste)

  I read some of the other comments on this subject, but it seems a mistake with many causes.

  Everyone had this error and solved?

  See you soon

  Steve

  Thank you, not quite a permission thing, but having to look in the folder, I can see the barsigner.db was zero byte, it opens and it was empty, just replaced with the back facing upwards.

  It seems that the upgrade had created an empty file?

  Weird, but now debug token created, the signature was working because I was using the backup even when for in jam deploy tool.

  Bravo for that.

  Salim

• Are there other ways to install debugging other than its use qde token

  Hi all

  Currently I use q to install my token of debugging on the phone.

  Are there other ways to install the debugging token without using the QDE?

  Thanks in advance.

  jessica99327, there is an alternative. Looks like you can learn how to use the "draft" mode in the supplier portal.

  In a Word, instead of using chips debugging, you can create a copy of the signed receipt of your application. You download which, at the entrance of product that you create for your application in the portal provider as a new version. You attach the .bar file as you normally would, but after you save the new version you do NOT submit them as you would for a final version. It will be marked as a 'project' instead.

  Now, you use the 'sandbox' feature in the supplier portal to add emails your testers as sandbox accounts BBID to sand. (In the main menu in the provider portal.) These users must then put their devices in development Mode, and then run BlackBerry World. They slip down to obtain the settings menu of the application, select the page in development Mode that should be visible and enter the SKU or product id (that you provide) to the application under test.

  They should then see entry application (this may take a few hours before it is visible, when you perform this operation for the first time) and can hit download (without having to pay for it). It will install and should work exactly as he would have if you had released it and that he had bought the app.

  There should be multiple threads in the BlackBerry World Development forum which describe this in detail or answer the questions about it, if you try this and need more help.

• Problem with refresh PDFKit full screen

  I do a lot of presentations in PDF format (they are usually created with LaTeX, but I as explained below, this detail has nothing to do with the problem).

  Very often a slide appears in increments - think of several chips which are revealed one by one.

  What is really happening, is that each step is a separate page, but the user should not notice it.

  So if you have a bulleted list

  •A

  •B

  •THIS

  There are really three separate pages (one that contains just A, an and B and a with A, B, C).

  When you advance to the next overlay, it seems that a and B has been added to the screen, and then a C (even if every time an entire page is replaced by the next).

  In the Sierra this screen refresh is not smooth and the public can clearly see the screen "shaking."

  I tested it on two machines. I did a test of the Keynote presentation, which looks great; and then did the same with the PDF version and it is fragile. It was regardless of what program I used to view (Preview, Skim, TeXShop), which indicates that the problem is in the common framework, they use all - PDFKit.

  I already submitted comments to Apple, but I'd like to hear if people also see this; just to make sure that it is not something weird on my machines.

  Yes, I confirm this. It seems that PDFKit "re-focuces" fonts whenever we turn the page. While this might be great for static pages (best font anti-aliasing) is certainly a problem for presentations: you can clearly see the fonts from blurry to sharp in the slides with incremental changes. That's all just awful. On the other hand, PDFKit is not smooth images embedded in pdf files in the Sierra at all: those with straight lines will look on-screen civet. Once again, all just awful. Bad bad, Apple!

• OfficeJet pro 8500: print heads and things

  OK, maybe it's a bit confusing. I have three printers Officejet 8500. No. 1 went into a never-ending cycle of clean print heads (after more than 30,000 pages) and without me being in the room the right side of the printer depot of ink on the table. Tried the reset but not good. Bought a second hand and after a few weeks, it came in paper jam mode. Could not resolve so finally bought number three. Works a treat and has no problem. Numbers one and two are for recycling. Print heads removed and stored in an airtight box with damp cloth. What is staging. Now after spending all that money, the last thing I want, it's having problems with number three. However, I have three cartridge sets new and unopened from PC World (their own brand) which cost £39. They came with the number two of the machine. They are not dated and has no way to know at what age they are. They are not oem, I can't any advice on their likely performance, but what worries me, is can the ink begins to solidify and block print heads as they age? Like I said they are still sealed. If I change the cartridge and use a spare set of the print heads to check the print output and that something is wrong if I can swap cartridges and print heads back without the printer enter the cycle of constant head cleaning. I know there have been issues with these printers but mine is on 27 000 pages and all tests are reports back in good health. I have also several chips of HP cartridges genuine that I can use.  Sorry as that a little long-winded.

  Hello @notahappybunny,

  Welcome to the forums of HP.

  I understand that you have some questions and concerns about your ink cartridges non OEM 8500 and some.

  I would like to help.

  The following document explains on the expiry of the ink.

  Consumable inkjet HP - ink Expiration

  From what I've read, it's I think I understand that the ink may change over time.

  Because ink is sealed I don't think they're going to solidify, but the pigment used in the ink may eventually separate from water. This will certainly cause print quality problems.

  In addition, your first 8500 printhead might not be good.

  A bad print head may cause the impression of entering the cycle without end cleaning.

  I hope that I have answered your question.

• HPE-470f built in SD card reader reads the cards as write protected

  WIN 7 Professional 64 bit, SP 1 and all the updates, latest Bios and drivers installed, HPE-470f

  The SD card reader to work properly.  Put it in any piece now, the camera sees the chip, reports that it needs to be formatted (not true) and when he tries, then says it cannot complete.  Displays the disk disk management is write protected.  I suspect the internal switch inside the drive is blocked or broken.

  have you tried: blowing the dust out of the drive, spray of contact cleaner in the device, try several chips (all of which work well in my cameras before and after trying in the HP drive.)

  Any suggestions?

  Apart from the drive of cleaning dust and spray contact cleaner in the drive, I have:

  1 uninstalled all USB devices in Device Manager and forced the system to reinstall everything.

  2 uninstall the drive itself in the Device Manager and forced the system to reinstall.

  3 tried several cards in the reader with similar results: the system sees the card, says it has to be formatted (it was already formatted in the camera).  Formatting attempts get an error that it cannot be completed.

  4. the program of HP, but it can not format the card to be downloaded.  Reports "unable to format the device.

  I've always used player soft and methods of ejecting device to remove cards.  I think that it is a loss with a broken read/write switch.  It's too hard getting the subassembly of legacy of the case card reader.  It takes almost a complete disassembly of the machine to get out.

  Thanks for trying to help.

• Looking for guidance, Clip Zip or Clip +.

  My beloved clip zip just died.  I thought to replace it with the new sport clip, but a check of the forums told me it would be disappointing to at least.  I use my zip primarily audio books and have an extensive library of books on several chips for my Zip.  As I wanted to replace the Zip file, I discovered that it seems to be abandoned.  I can find a little but they are twice what I paid initially for mine and if Sansa is not making more...  Anyway, it also seems the Clip + is still in production.  Can someone tell me, the Clip will be + play chips I put in place for the Zip.  That what I lose in the way?  You recommend staying with the Zip for as long as I can get a new one to last?  I started with a simple clip and improved because of the chip.  Albumn art and color are not important to me, but with success to listening to audio books without editing each track is.  I'm looking for advice from my fellow lovers of Zip.  Thank you

  That's the beautiful thing about the microSD - can exchange cards in and out, including between the actors (including the Clip + and Clip Zip).

• WRT610N v2 distribute IPs when wireless security is enabled

  I got my wrt610n v2 for several months and it has worked very well.  But today, something happened.  When I could not get an IP address on the wireless, I reset it.  That did not help.  So, I have connected from a wired computer and spent several hours debugging.  What I've discovered, is that when wireless security is enabled the DHCP wireless no longer works (ALL the wireless security).  If I turn off security, the instant connection of all wireless computers.  Turn it back on, all clients will try to connect, but get no IP address.  (Yes, the security settings on clients are correct).  I do not use the 5 GHz, only the 2.4 for B/G.  Here are some things I've tried:

  1. reset to factory settings.  No change.

  2 reinstalling firmware.  No change.

  3. all types of wireless security.  They do the same thing.  Once activated, no more IPs get handed out.

  4. different SSID. No effect.

  5. remove all wireless network PC and their implementation from scratch.  The problem is not with the customers.  All machines (more my phone) have the same problem.

  6. different wireless channels.

  Other notes:

  -The router is properly broadcast the SSID when activated.

  -It passes both the type of security.  My laptop win7 will correctly identify the type of security and request the appropriate key/expression/whatever whenever security is enabled.

  -J' had the same SSID and WPA phrase for years and used for several months with this router with no problems.  So I know that security is properly configured on all my machines.

  Any ideas?  Right now I have a non-secure network set in place and it works fine.

  Just thought I'd give an update.  A new router hooked up and got the same behavior.  So that it reduces... should be environmental.  Later I thought about it.  A neighbour had stolen my SSID but not broadcast it so I couldn't see it.  All my devices were getting confused.  Choose a new SSID and bam, fixed everything.   I was not even using a default SSID.  I'm guessing they were putting it router for the first time and just picked up something they had seen before.

  EDIT > I tried different SSID as solution before (see the original post), but that has not worked.  I think that I also need a different channel.

• BB10 Simulator on Vmware ESXi

  I'm trying to get the BB10 Simulator to work on a VMWare ESXi server. Here's what I've done so far:

  1. Installed the Simulator on yhe development machine, started VMWare workstation, open the vmx file and downloaded the VM on the ESXi server.
  2. Disabled 3D acceleration on the machine virtual (on ESX) and selected 'Full touch safe mode' after starting the virtual machine.

  At this point, the virtual computer screen displays the IP 'telnet ftp ssh qconn', the axis of the device and the build number.

  The next step is to connect the Momentics IDE to this virtual machine.

  The Simulator is in need of a vmx file configuration dialog box (likely to run vmware specific commands). In the configuration of ESXi, there is no vmx file.

  If I try to connect to the virtual machine by IP address, I need a device password, I did not.

  Someone at - it suggestions on what do I do now?

  In response to my own question because I found the answer:

  Now that I have the IP address, I just follow the steps described in

  http://supportforums.BlackBerry.com/T5/native-development/BB10-native-Cascades-SDK-not-connecting-to...

  Because I had never set up a password for the Simulator, I left the empty password field.

  Copy-paste the details:

  Of your IDE

  -Right click on your project in the Project Explorer

  -Go to Blackberry tools and click on configure target...

  -Click Add new target it... button and enter the IP address of your Simulator in the host name or IP address field, enter your password if you have one then click on finish

  To run your application on the Simulator:

  -In the Project Explorer view, double click on file bar - descriptor.xml, then click on chip Debug Set button to set the author of the application information.

  -Set the configuration of the correct version for the Simulator first by right-clicking on your project and selecting Configurations of Build > Set Active > 4 Simulator-Debug.

  -In the Project Explorer view, right-click the project and select build project.

  -Right click on the project again, and then select run as > BlackBerry Application C/C++.

• I don't think that my DHCP 43 option works

  I get this in the console of the AG of 1130 when I reset the button on the AP. I tried to give the CISCO-LWAPP - CONTROLLER.nccvt.k12.de.us ip address of the AP server management point but no dice.

  Thank you

  Gary

  % LWAPP-5-CHANGED: LWAPP changed state of DISCOVERY

  * 00:00:32.837 Mar 1: % ADDRESS_ASSIGN-6-DHCP: Interface FastEthernet0 assigned D

  Address HCP 10.228.50.163, mask 255.255.0.0, hostname ap

  Translate "CISCO-LWAPP - CONTROLLER.nccvt.k12.de.us"... the domain server (10.228.1.3

  )

  * 1 Mar 00:00:37.109: LWAPP_CLIENT_ERROR: lwapp_name_lookup - could not resolve

  CISCO-LWAPP - CONTROLLER.nccvt.k12.de.us

  The other network could be a problem after you connect, but I don't think it's your problem of controller. Try the date and time fix first. I would like to know how that works. I think that your 43 option does not work well. Use option 43 with the IP address of the controller. Also, make sure all the ports on your switches are shared resources for the appropriate VLAN. The answer with the 1131 lies in your network or the controller, but seems to be your Option 43. I would like to start a TAC call on it if you have. They should have executed several LWAPP debugs. I'm betting your dns or IP address of the controller input is not correct. Look at your dns server and see which resolves the name of the controller. If you resolve the AP Manager interface and not the interface of management that would be the problem.

• PIX-to-PIX VPN does not

  Here is my configuration:

  local-pix 501 connected to the DSL line.

  506th pix remote control connected to the dsl line

  unique IP address routable on each PIX (so using PAT, no NAT).

  try to create a site to site vpn. Tried of PDM, CLI via documentation cisco CLI via the book of Richard Deal. I can apparently make the connections, but no traffic flows. I have no idea what I'm doing wrong. Here are the relevant configs:

  PIX of premises:

  6.3 (3) version PIX

  interface ethernet0 car

  interface ethernet1 100full

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password

  passwd

  hostname encima

  domain name gold - eagle.org

  fixup protocol dns-length maximum 512

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  fixup protocol tftp 69

  names of

  access-list outside_access_in allow accord 64.144.92.0 255.255.255.128 no matter what newspaper

  outside_access_in list of access permitted tcp 64.144.92.0 255.255.255.128 eq pptp pptp log any eq

  outside_access_in list access permit icmp any any echo response

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit icmp any any source-quench

  outside_access_in list all permitted access all unreachable icmp

  outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

  outside_access_in list of permitted access esp 67.100.95.114 host 66.159.222.109

  access-list 90 allow ip 172.17.0.0 255.255.255.0 172.24.1.0 255.255.255.0

  pager lines 24

  opening of session

  registration of information monitor

  logging buffered information

  ICMP permitted host 67.100.95.114 outside

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside x.x.x.109 255.255.255.0

  IP address inside 172.17.0.1 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  location of PDM 172.24.1.0 255.255.255.0 outside

  location of PDM 172.17.0.0 255.255.255.0 outside

  location of PDM 64.144.92.0 255.255.255.128 outside

  location of PDM 172.17.0.0 255.255.0.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0-90 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 66.159.222.1 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  LOCAL AAA authorization command

  Enable http server

  x.x.x.x 255.255.255.255 out http

  x.x.x.x 255.255.255.128 out http

  http 172.17.0.0 255.255.255.0 inside

  No snmp server location

  No snmp Server contact

  SNMP-Server Community public

  No trap to activate snmp Server

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set strong esp-3des esp-sha-hmac

  toEssex 20 ipsec-isakmp crypto map

  correspondence address card crypto 20 90 toEssex

  peer set card crypto toEssex 20 67.100.95.114

  toEssex 20 set transformation-strong crypto card

  toEssex interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 67.100.95.114 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 9

  ISAKMP policy 9 3des encryption

  ISAKMP policy 9 sha hash

  9 1 ISAKMP policy group

  ISAKMP policy 9 life 86400

  Telnet 172.17.0.0 255.255.255.0 inside

  Telnet timeout 60

  SSH x.x.x.x 255.255.255.128 outside

  SSH timeout 60

  Console timeout 0

  dhcpd address 172.17.0.2 - 172.17.0.32 inside

  dhcpd dns x.x.x.100 66.218.44.5

  dhcpd lease 3600

  dhcpd ping_timeout 750

  dhcpd outside auto_config

  dhcpd allow inside

  username ckaiser password * encrypted privilege 15

  Terminal width 80

  Cryptochecksum:xxxxxx

  : end

  PIX remotely:

  6.3 (1) version PIX

  interface ethernet0 car

  Auto interface ethernet1

  ethernet0 nameif outside security0

  nameif ethernet1 inside the security100

  activate the password

  passwd

  EVL-PIX-DSL host name

  domain essexcredit.com

  fixup protocol ftp 21

  fixup protocol h323 h225 1720

  fixup protocol h323 ras 1718-1719

  fixup protocol http 80

  fixup protocol they 389

  fixup protocol pptp 1723

  fixup protocol rsh 514

  fixup protocol rtsp 554

  fixup protocol sip 5060

  fixup protocol sip udp 5060

  fixup protocol 2000 skinny

  fixup protocol smtp 25

  fixup protocol sqlnet 1521

  names of

  access-list outside_access_in allow accord any any newspaper

  outside_access_in list access permit tcp any any eq pptp newspaper

  outside_access_in list access permit icmp any any echo response

  access-list outside_access_in allow icmp all once exceed

  outside_access_in list access permit icmp any any source-quench

  outside_access_in list all permitted access all unreachable icmp

  outside_access_in esp x.x.x.114 host 66.159.222.109 host allowed access list

  outside_access_in list of permitted access esp 66.159.222.109 host 67.100.95.114

  access-list 80 allow ip 172.24.1.0 255.255.255.0 172.17.0.0 255.255.255.0

  pager lines 24

  opening of session

  timestamp of the record

  monitor debug logging

  logging buffered information

  recording of debug trap

  history of logging warnings

  logging feature 22

  ICMP permitted host x.x.222.109 outdoor

  ICMP allow any inside

  Outside 1500 MTU

  Within 1500 MTU

  IP address outside x.x.x.114 255.255.255.248

  IP address inside 172.24.1.240 255.255.255.0

  alarm action IP verification of information

  alarm action attack IP audit

  PDM location x.x.x.x 255.255.255.255 outside

  location of PDM 172.24.1.0 255.255.255.0 inside

  PDM logging 100 information

  history of PDM activate

  ARP timeout 14400

  Global 1 interface (outside)

  NAT (inside) - 0 80 access list

  NAT (inside) 1 0.0.0.0 0.0.0.0 0 0

  Access-group outside_access_in in interface outside

  Route outside 0.0.0.0 0.0.0.0 67.100.95.113 1

  Route outside x.x.x.0 255.255.0.0 66.159.222.109 1

  Timeout xlate 0:05:00

  Timeout conn 01:00 half-closed 0:10:00 udp 0: CPP 02:00 0:10:00 01:00 h225

  H323 timeout 0:05:00 mgcp 0: sip from 05:00 0:30:00 sip_media 0:02:00

  Timeout, uauth 0:05:00 absolute

  GANYMEDE + Protocol Ganymede + AAA-server

  RADIUS Protocol RADIUS AAA server

  AAA-server local LOCAL Protocol

  the ssh LOCAL console AAA authentication

  LOCAL AAA authorization command

  Enable http server

  x.x.x.x 255.255.255.255 out http

  http 172.24.1.0 255.255.255.0 inside

  SNMP-server host within the 172.24.1.11

  Server SNMP Emeryville, CA location

  Server SNMP contact Charlie Kaiser

  snmp4esx SNMP-Server community!

  SNMP-Server enable traps

  enable floodguard

  Permitted connection ipsec sysopt

  Crypto ipsec transform-set strong esp-3des esp-sha-hmac

  toEncima 10 ipsec-isakmp crypto map

  correspondence address card crypto 10 80 toEncima

  peer set card crypto toEncima 10 66.159.222.109

  toEncima card 10 game of transformation-strong crypto

  toEncima interface card crypto outside

  ISAKMP allows outside

  ISAKMP key * address 66.159.222.109 netmask 255.255.255.255

  part of pre authentication ISAKMP policy 8

  ISAKMP strategy 8 3des encryption

  ISAKMP strategy 8 sha hash

  8 1 ISAKMP policy group

  ISAKMP life duration strategy 8 the 86400

  Telnet 172.24.1.0 255.255.255.0 inside

  Telnet timeout 60

  SSH x.x.x.x 255.255.255.255 outside

  SSH timeout 60

  Console timeout 0

  username ckaiser password * encrypted privilege 15

  Terminal width 80

  Cryptochecksumxxxxxx

  : end

  When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. Connectivity Internet is fine. I can ping the addresses outside each pix OK.

  My debug output for isakmp shows the State of return is IKMP_NO_ERROR and the SAs look OK; everything matches. Several configs / debugs available upon request.

  No idea why I can't get from one network to the other?

  Thank you!

  Charlie Kaiser

  "When I try to ping an address on the net since the first pix of 172.24, I get no response. When I try to ping an address on the net since the second pix 172,17, I get no response. »

  It could be as simple as because you try to ping from the PIX (because you can't) and your tunnel could in fact be working properly

  Try to ping from a device on 172,17 to one in 172.24.

  (Make sure that your access point to the opposing LAN for these host devices are set to be the PIX)

  HTH

• Passage of token in Oracle APEX 5.0

  Hi team,

  In 5.0.

  There is the new parameter optional x 01 (f? p = 100: 1:... & x 01 = < token >), and we can directly access the value with APEX_APPLICATION. G_X01

  
  

  But by the way several tokens are not allowed here. Does anyone know if we have several chips to the next page without creating the page elements, or if we have the ability to switch tables in this token?

  
  

  Someone at - it have an idea about it?

  
  

  Thank you

  Sunil bhatia
  

  Sunil Bhatia wrote:

  I tried to learn the new features present in 5 APEX and got a feature where we can pass the token as 01 x and use via APEX_APPLICATION. G_X01 in the page target. My issue was that as we know there are 01 to x 49 x channels, are therefore several channels also present in a similar way for the creation of items hidden on the target page is saved?

  No, there is only the x 01 parameter.

• Path to the folders in MXI

  Hello

  I have seen that there are several chips of path in the MXI Tech Note pdf file.

  Because ExtendScript offers a different set of tokens (which I use in my scripts to manage files), I'm currently trying to understand what is the intersection of these two groups (MXI and ExtendScript tokens).

  My goal is to install files (say, the documentation pdf) via the extensions Manager bundled with scripts PS - so that scripts can find and open them if necessary, then.

  In particular, I was interested in the user Documents folder and the folder of the user's desktop. While they are easily defined with the folder my documents and desktop in ExtendScript chips, I couldn't find any token MXI path to get there - the closest I have is $userhomefolder.

  Y at - it no safe, regardless of the language (I mean: not only in the English operating systems) to set these records in a MXI? Would be $userhomefolder/Documents and $userhomefolder/Desktop do the job?

  My doubt is that, for example, an Italian user installation files via ExtensionManager under his Home/Office folder will have disorders because my script Photoshop (looking real desktop) will try to locate them in the House of /Scrivania, failed.

  Thanks in advance!

  Davide

  Hi DBarranca,

  $usernhomefolder/documents and $userhomefolder / Office works in your case. It is language independent. In the file Explorer, the full name of 'Documents' or 'Office' is dependent on language, but in the file system, the paths are language independent. Thank you.

  Xiaoyi