Several copies on different computers

Similar Questions

• If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as a photoshop and illustrator, for example.

  If I buy the adobe cc then can I use it on several laptops at the same time? I use two different computers for my work. as one for photoshop and Illustrator for example.adobe

  This excerpt from: terms of conditions of use Adobe software should help to clarify the terms for you:

  ..... You can activate the software on up to 2 devices (or virtual machines) at the same time, if these activations are associated with the same Adobe ID for the same person, except http://www.adobe.com/go/activation_fr. However, you cannot use the software on these devices simultaneously.

  You can also see:FAQ: where can I find the terms of membership and the terms of use?

• Order several copies of some pictures?

  This probably a stupid question, but I can't figure out out to different order numbers of copies for the various impressions through the photos app. For example, I need 4 a single photo, another 1, 2, etc. I've been through the options several times but only to see a way to order several copies of all the photos in order. Thanks a lot if you can answer this!

  MacBook Pro, OS El Capitan

  Diana

  Select Photos and click on + and select impressions - choose a photo and at the bottom of the window that appears is the number of copies of this photo

  LN

• Can I synchronize the counters on two different computers in the C API?

  I installed the M-series cards (6254) in several computers. I would like to synchronize the counters for each card.  The best way that I came with to do this was to have the counter on each counter entries read a common external clock signal running at 10 KHz I have would then feed a second signal to each card and trigger the task that runs each counter starts when the second line goes high.

  Following the examples provided with the C API, it was easy to get each card KHz signal and then to match the beginning of the counter that I tried to read

  DAQmxCfgDigEdgeStartTrig (taskHandle, inputLineStr, DAQmx_Val_Rising);

  However, this did not work and gave me the following error:

  DAQmx error: the specified property is not supported by the device or is not applicable to the task.
  
  Property: DAQmx_StartTrig_Type
  
  Task name: task
  State code:-200452
  
  End of the program, press the Enter key to exit
  
  

  I know it's very simple sync the cards within a computer using the RTSI interface, but it is not possible that my cards have to reside in different computers.

  It is even possible to synchronize the counters on computers, and if yes how can I do it with the C API?

  ------------------

  Here's what I've written so far:

  
  
  
  
  #define DAQmxErrChk (functionCall) if (DAQmxFailed (error = (functionCall))) goto error; on the other
  int main (void)
  
  {
  
          int         error = 0;
  
          TaskHandle  taskHandle = 0;
  
          uInt32      data = 0;
  
          tank        errBuff [2048] = {'\0'};
  DAQmxErrChk (DAQmxCreateTask ("task", & taskHandle));
  
          DAQmxErrChk (DAQmxCreateCICountEdgesChan(taskHandle,"/Dev1/ctr0","",DAQmx_Val_Rising,0,DAQmx_Val_CountUp));
  
          DAQmxErrChk (DAQmxConnectTerms ("/ 10MhzRefClock/Dev1", "/ PFI8/Dev1", DAQmx_Val_DoNotInvertPolarity));
  
          DAQmxErrChk (DAQmxCfgDigEdgeStartTrig(taskHandle,"/Dev1/PFI14",DAQmx_Val_Rising));
  DAQmxErrChk (DAQmxStartTask (taskHandle));
  printf ("without interruption of the poll. Press Ctrl + C to interrupt\n");
  
          While {} (1)
  
                  DAQmxErrChk (DAQmxReadCounterScalarU32(taskHandle,10.0,&data,));
  
                  printf ("\rCount: %u", data);
  
                  fflush (stdout);
  
         	}
  
  Error:
  
          puts("");
  
          If (DAQmxFailed (error))
  
                  DAQmxGetExtendedErrorInfo (errBuff, 2048);
  
          If (taskHandle! = 0) {}
  
                  /*********************************************/
  
                  Stop DAQmx code
  
                  /*********************************************/
  
                  DAQmxStopTask (taskHandle);
  
                  DAQmxClearTask (taskHandle);
  
          }
  
          If (DAQmxFailed (error))
  
                  printf ("error DAQmx: %s\n",errBuff); ")
  
          printf ("end of the program, press the Enter key to quit\n");
  
          GetChar ();
  
          return 0;
  
  }
  
  

  Hi neurostu,

  Arms start triggers are disabled by default, so they do not have a default PFI line.

  You will need to set some properties DAQmx to configure a trigger for start of arms. Try adding between DAQmxCreateCICountEdgesChan() and DAQmxStartTask():

  DAQmxSetArmStartTrigType (taskHandle, DAQmx_Val_DigEdge);

  DAQmxSetDigEdgeArmStartTrigSrc (taskHandle, "/ Dev1/PFI14" ');

  DAQmxSetDigEdgeArmStartTrigEdge (taskHandle, DAQmx_Val_Rising);

  You have the file "help NOR-DAQmx C reference"? It should contain descriptions of the trigger > more > arm Start properties.

  Brad

• LabVIEW move things on different computers block diagram

  We have a site here license to my work, and I use several computers to develop and deploy our test code. However, I discovered that between computers, often things move on the block diagram simply by opening them on different computers. Mainly text fields. We have some text fields next to rows of a table of block diagram that are alliged with the lines of table on a single computer, while the same without code change when opened on another PC, all text fields are compressed vertically so that they no longer align with the rows of the table. This could be the cause, and is it possible to fix it?

  Thanks for the replies. It is the size of the police which was the issue. However, although I have tried to change the default Application font size (by the "default font" settings of "modification of the characteristics of text") to match the computers that had "correctly" it was not solved the problem. I finally realized that I had to change the police system from the Options > environment > fonts > menu fonts application of the front screen of "Open/create", then completely restart LabVIEW. Problem solved.

• Cannot close a session on 2 different computers

  Hi all, I took a CD of a choir of school, my daughter is in her school. The teacher recorded them & gave the children a CD. However parents couldn't play (30 CD & 3 hours of burning!). When I checked the CD on my computer the session had not closed the songs were there in a directory & I could only play on my computer by going into the sub directory. He didn't finalize or close on the menu that I could click. I was lent the master copy which looked OK & was playable as a normal CD & songs on top of the CD, cda files do? I burned the album to the library then ripped the CD - R disc. The disc is ejected after the meeting, but I had the same problem with CD player & the session did not close on my CD that I burned either. I clicked on properties of the CD player & the box has been checked to log off. I tried another CD of my library burned & I could play on the CD player... strange. I tried the choir & the same thing. I could not read it on a CD player. If I remember the memory I usually get asked if I want to finalize the CD when recording is finished. Again not to finalize or close a menu, I could see.

  I then decided to see if I could rip the CD to a playlist that i Tunes so see if it works & that finalized & closed OK & could read the CD in a CD player. What seems to be the case on 2 different computers? I don't know what version of Windows Media, the school's computer runs but mine is the 64-bit version of VIsta with the latest version of Media Player.
  Look forward to any thoughts on this... See you soon... David

  Thank you for that.

  I just got home & loged on my computer. I checked my library & files was torn off as files wma & titles numbered 1 to 23 artist unknown, because it is a choir from the local school. I have insterted the disc that I threw in the trash as it partially written for her. I opened Windows Media Player & move the files on the CD, but he asked me for a blank disc & not go.

  I then opened windows Explorer & could drag & burn that way on the disc. Is that mean that the original CD was recorded as a cd data & not playable as DC music? As in the Explorer Windows Media not? Or in the form of wma files that can be read in computers & cars with wma players?

  I now ejected the CD & the computer "says please wait so it can be used & complete on other computers. He did not originally when I was burning the disc.
  I tried on the my Sony Music center. It read the disc but only displayed 3 tracks, but would not play. They are wma files. I can read it on my car CD player that can play WMA discs. I think the fact is that the original disc has been saved as wma files & maybe I Tunes ripped it converted to MP4 & engraved on the disk in the form of music files that can be played on a conventional CD player. When it was initially torn, or when I did it I should have selected a format to burn different although I only see wma in the burning options.
  What do you think?

  =============================================
  Good grief... it's complicated.

  If the directory of the CD shows media with extensions like... WMA,
  MP3, etc... It's a data CD.  And Yes... 'some' but certainly not all CD
  Players will recognize these formats. The manual of the CD player will list
  all compatible formats.

  The directory of the CD shows the CDA files... If, in fact, encoded as a
  Audio CD and should be recognized in all CD players with the exception
  of the few who simply will not play any type home made CDs.

  If you start with a new, Virgin CD - R and burn an Audio CD using
  . WMA files... the result (assuming your burner working properly) will be
  play in addition to all the readers of CD and it is one that you could use to
  make the copies with ImgBurn

  The real advantage to create an ISO is that each subsequent copy
  doesn't have to be re-encoded and drives only burn faster
  but will be more consistent.

  I feel like I'm just going around in circles rehash old news so that
  is about all I can offer.

  Good luck with your project.

• How to extract the same song, several times using different bit rates or formats and store all the digital music files in WMP 12 default on the same HDD music library

  Using Windows Media Player 12 (w/under Windows 7), "can I ripping the same song, several times, using different bitrates & and/or formats and store all the digital music files in the music library by default WMP - 12, on the same hard drive?

  1.) #1 goal: tear up the same song repeatedly, w / "different rates" as a WMA file.

  2.) #2 goal: tear up the same song repeatedly, w / "different rates" as an mp3 file.

  3.) #3 objective: NOT to each subsequent copy (version) of the song, deleted & and/or replaced by the previous version of the song [even].

  4.) question Bottom Line Up Front--> is Windows Media Player 12 (included with the Windows 7 operating system) are able to achieve '#1 objectives; #2; & #3 above?

  5.) details/example: I want to tear the piece "Maria Maria by Carlos Santana" to my laptop as a Windows Media Audio [WMA] file.  In addition, I would like to rip the song 'Maria Maria' three several times with 3 different bitrates in format WMA; and, as an MP3 file.  Therefore, my final result wished (after the extraction process), will take place the four 4 audio files split up as follows: (a) 'Maria Maria by Carlos Santana'--> Format: file WMA; Ripped @128 Kbps bitrate.  (b) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped to the "Variable bit rate; (c) ' Maria Maria by Carlos Santana'--> Format: file WMA; Ripped commissioning "Lossless." and (d). 'Maria Maria by Carlos Santana'--> Format: MP3 file. Ripped @256 Kbps bitrate.

  6.) my preference: I do NOT want to rename the file (s). {for example, 'Maria Maria by Carlos Santana' renamed/changed for--> "Maria_Maria_by_Carlos_Santana_128kbps.wma",...} 'Maria_Maria_by_Carlos_Santana_256kbps.mp3 '; etc.}.  In addition, I am not concerned about the additional disk space that will be consumed after multiple copies of the same song with different speeds of transmission and different formats.

  7.) my experience w / Windows Media Player 10 (w / the operating system of Windows XP): using WMP - 10, my goal (s) described above is not a problem at all.  Simply insert the CD purchased by Carlos Santana, containing the song "Maria Maria"... Select the desired Format (WMA; WMA VBR; WMA Lossless; or mp3)... Select the desired flow rate (WMA... 128/160/192kbps_mp3: 128/192/256/320 kbit / s; etc.) ; and click on the "RIP" button to start the copy process on the hard disk of of Carlos Santana's "Maria Maria".  This process (w / WMP-10) would result in having the same song, copied on the hard disk, with levels of quality different "audio" (via the different bit rate settings); regardless of the format (MP3/WMA) which was chosen.

  8.) my experience w / Windows Media Player 11 (w / the operating system of Windows XP): using WMP 11, to described above of my objective (s) could not be reached e-a-s-i-l-y.  The problem with WMP - 11 - in short - which was after the desired selection "Rip settings" tab 'Options' of WMP - 11 (i.e., Format & Bit Rate) and heart-wrenching piece wanted to {'Maria Maria by Carlos Santana'} a moment later/second, WMP11 remove / would crush the previous version of the song [even].  Therefore, the program would NOT allow the user to have multiple copies of the same song on the hard drive of the PC; which obviously restricts a user to have the freedom to choose what level of quality digital audio, they prefer to listen to.

  9.) the ability to have multiple copies [at my descretion] of the same song (on my hard drive) with different bitrates and formats in my music library, is important for me because it has a direct impact on "how I enjoy MY music ', and in what form (audio quality), I choose to listen to my music.  {For example, when I exercise and listening to my camera, digital audio player (Zune), a song ('Maria Maria by Carlos Santana'), will usually be torn off at a lower rate due to the unit of capacity reduction of storage - compared to the storage capacity of notebook PCs/desktop/external hard drives PC.}  However, when I listen to my music through my home cinema or entertainment system (which contains a hard disk dedicated with a large storage capacity), I prefer to load the entertainment system with digital music files that have been ripped to WMA... with the bit being rate-setting is for the: settings "WMA Variable Bit Rate" or "WMA Lossless.

  10.) there you have it.  This is my first post in this forum.  I hope that [detailed] explanations, will be sufficient to encourage these "with knowledge & the hands on experience" using Windows Media Player 12 (as well as with WMP-10/WMP-11 respectively), by providing a [step] "How-to"... "solution to my situation.  It would be highly appreciated.  I'm looking forward-'the solution' - and relevant suggestions & and/or community feedback regarding my request for assistance.

  * Thank 'All' (that would) in advance... For your time & Assistance *.

  Certainly, you can, but I would say that they be in different folders, for your convenience as well as Windows.  You can create one for each debit/format, then you will know who is who.

  In Windows Media Player, on the toolbar, select Tools, Options, Rip, and then select the flow you want first, rip music, then change the folder (higher on the same tab) and rip again... and so on and so forth.

  When you are at home on your home theater, you can use the 320 bitrate folder, when you transfer to the Zune, you can use one of the lower bitrate files (although I personally tear it up to 320 and let the Zune reduce as he wants, even with the iPhone via iTunes, hard drive space is not really a problem here) my server has several hard drives, and I can always add more if and when space is low!

• Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Hi I would like th different creative cloud buy 2, only photoshop/lightroom one and the other with all pack.is it is possible because I saw that we can only install on 2 different computers at the same time

  Creative desktop cloud applications can be downloaded and installed on multiple computers, regardless of the operating system. However, the activation is limited to two machines per individual related to the composition, and you may not use the software on these devices simultaneously.

  You can also see:

  FAQ: Can I install Creative Cloud on several computers?

  You can either sign of Creative cloud on a computer to connect to another, or as you said, buy a membership second using an AdobeID different so that you can leave, signed at on 4 computers.

• I want to know if I can use creative cloud with the same account on different computers

  I want to know if I can use creative cloud with the same account on different computers, because my children want to she and I have known if I buy when I can use it on several computers at the same time

  If it is the individual subscription, you can activate on 2 computers only.

  However, there is no limit for installation, but you can connect and activate on 2 computers only.

  If you had already signed and activated CC apps on 2 computers, and there still if you want to activate on a 3' rd computer, you can simply disconnect one of the 2 comps, so that you can keep counties of activation.

  For more information, see the link below:

  https://www.Adobe.com/content/dotcom/IE/products/creativecloud/FAQ.html

• If you have CC on two different computers and you forget to sign out how do you use CC on the second computer?

  If you have CC installed on two different computers and you forget to sign out how do you use CC on the second computer?

  Please see this link for more information on the installation of creative cloud on multiple computers:

  FAQ: Can I install Creative Cloud on several computers?

• Can I manage a site using two different computers using Dreamweaver CS6?

  Can I manage a site using two different computers using Dreamweaver CS6?

  Yes, by using Check In / Check Out and a computer do not replace the work of the other or create copies in conflict.

• I have Thunderbird on 3 different computers, all connection on the same e-mail account, but they do not always appear to be in harmony

  Access my account of personal e-mail with Thunderbird 3 different computers/smart devices. They do not seem to be in harmony. For example, I have deleted hundreds of emails from one of my computers, but they still came into my account from one of the other computers. Maybe I don't understand how parameters work?

  IMAP only multiple devices to synchronize because it is based on the server. POP only downloads the messages from the Inbox to the server and stores them on the local disk. There is no communication to the server on the deletion of messages.
  You should learn the differences between POP and IMAP to decide what works best for you.

• Why my ipod has several copies of the same album on my ipod, but only one on my list of itunes

  My ipod has several copies of both albums, but I only have everyone on my list of itune. Synced the ipod, but it remains the sam (several copies of both albums)

  For general advice, see grouping of tracks in albums . Older IPod such as classic to do not apply artist album so an album that looks OK in iTunes can break upward on the device. I recommend using a consistent value for the artist and the artist comments/featured information moving in the track names.

  TT2

• LaserJet P1005: LaserJet P1005 unintentionally print several copies after the decommissioning of 10 of Windows to Windows 7

  My LaserJet P1005 trustworthy priinter was perfectly printing for a few years on my HP TouchSmart 300 running Windows 7 and connected via USB1.  I have upgraded to Windows 10 for two weeks before deciding that he was turning too slowly.  Subsequently, I have downgraded to Windows 7.

  Since the downgrade, the printer has been printing several copies of all documents (eg.  Word, Excel, Web pages).  He prints a copy, waiting (the State indicates a copy pending) and continues to print 3 or 4 future COPs..

  So far, I have tried the following:

  1 deleted and reinstalled the printer P1005 driver.

  2. guarantee that no multiple copies are selected in the options of the software and a printer.

  3. you click Printer Sharing tab in the printer properties.

  I know that's not a printer for the State of the art, but any suggestions on my printer P1005 back to normal would be greatly appreciated.

  Tom

  Hi @Amoeba,

  Welcome to the Forums of HP Support! I see by your post that the printer prints multiple copies of the same document. I would like to help you today. If this helps you to find a solution, please click on the button "Accept as Solution" down below in this message. If you want to say thanks for my effort to help, click on the 'Thumbs Up' to give me a Kudos.

  Try to clear the record of spool and restart the spooler to print, see if this will help, clear how current Print queue in Windows Vista & Windows 7.

  Please try the steps listed in this document, if the problem persists, HP printers - Print Jobs stuck in the print queue (Windows). They should help this situation. What were the results when you ran the Print and Scan Doctor?

  I used this document to the network printers, you can try it to see if it will help with the USB connection, HP LaserJet Pro P1102w and printers P1606dn - printer continuously prints the same Print Job after it is installed on a network.

  Please let me know the results and if there is anything else I can help you. Thank you.

• Container for several tables of different length

  Hey,.

  I'm doing an algorithm for labelling component connected in LabVIEW.  I came across the problem that I need some sort of data structure that I can't create.  I hope that I've missed something and someone can report this to me.

  What I'm looking for is a container that can contain lists of lists of 2 values.  Basically, I have several labels.  Each label will have a list of coordinates in.  The closest I came to this creation is a 2D cluster table.  Then, the cluster contains the coordinates X and Y.  The problem is that each list is not the same size, and for a table of 2D in labVIEW, all rows/columns must have the same length.

  In summary, I'm looking for a way to store multiple lists of coordinates.  The lists will all be of different lengths, and I don't know how many lists there will be.

  Is it possible to do this?

  If not, does anyone know an easier way than that looking for a 2D for concentrations table all?  At the back of my mind, I want to say that there may be a Vision VI of OR who can do this, but I can't find a.

  Thanks for your help,

  Dominic Walker

  A way to manage several arrays of different lengths (but all the same type of data) is to put the berries in a queue.  Each element in the queue must be a table, but they can be of different lengths.  To get to all the tables, you use the preview queue feature.  It returns an array of clusters with each table queue in a separate group (if I remember correctly).   Perhaps an array of clusters of berries would work for you.  I just checked that this allows arrays of different lengths.  You can also place a control of the chain with the label of the cluster if it is appropriate.

  Lynn