Several Destinations to the Upload

Similar Questions

• When exporting photos, lightroom saves several versions of the image on my destination folder

  Hello

  I've been using lightroom for editing my pictures for about a year now.  First, I noticed the problem a few months ago, but did not bother to seek a solution so far.  Whenever I finish photo editing, I export it to my destination folder.  My problem is that when I go in the destination folder, I see several versions of the photo, even if I only export (save) once when I am fully satisfied with the modified final image.  For example, I'll see img_2222, img_2222-2, img_2222-3 and so on, sometimes up to 10 versions.  I also noticed that the images are a little different with the final image is the image with the largest number suffix (for example, img_2222-10).  I hope I am making sense here...

  As you can imagine, it's frustrating, because I end up spending an absurd amount of time to delete the versions that I don't need.  Is there any solution for this?  I searched all the settings and don't see even an option where I can record all the steps of my editing process images...

  Help!

  Hi cindymaya,

  Could you please share the version of Lightroom that you use?

  Could you please share the Lightroom export settings by using a screenshot?

  When you export an image, Lightroom displays the top progress bar left referring to the number of images that are exported.

  This progress bar says exporting a photo when exporting?

  suggest you try to export to a new empty folder, and then check if it exports several versions.

  Kind regards

  Claes

• In the treatment of the Upload, I have a progress in inventory for 11 days

  Hello

  In the treatment of the Upload, I have a progress in the inventory for 11 days.  I think it might be hung.  I already have another inventory, but it might stop the others for the last 2 weeks.

  Thank you

  Clark Collins IV

  SWN

  Hello Clark,.

  We have experienced some problems at that time load balancing, resulting in several clients pushing multiple downloads, which has compounded the problem. Dorsal team is actively addressing the issue. We ask that you not in additional downloads queue until it completes the process.

  Thank you.

• Is it possible to see the names of the places for the uploaded images of office?

  I downloaded several collections of images Fund (lightning, moon, scenery, etc.), but cannot see where these images are taken.  My office of Bing puts a new picture every day and I can move my cursor over the "i" zone and see where he is.  Is anyway to do this with the uploaded images?

  Thank you!

  Hello

  Thank you for contacting Microsoft Answers.

  Details of the images found in the Details tab of the image properties. If you do not see such a thing, you cannot find the location without the support of the photographer.

  Usually, these days, cameras equipped with GPS are available. They will download the information of location automatically, if the option is enabled, and you can easily find the location, according to the coordinates.

• Win LR 6.4 import/Add - cannot change the destination of the catalogue

  Using LR 6.4 and has several hard drives installed on my desktop computer.  LR (.lrcat) catalogs are on the G drive - and have always been on the G drive.  LR and Photoshop are also installed on drive G.  My photos are in the folders on the F drive.  My two catalogues are given due recognition in the preferences as being on drive G.

  When I use the import - Add command, LR allows me to choose the source, but immediately chooses the destination as "My catalog" C drive.  Although there is a small box next to the C drive, it is unusable and I can't find a way to change the destination.  If I use other commands such as copy, I am able to change the destination.  But whenever I load photos from a disc, I have for them to make a folder on the F drive and copy them from the disk to the new folder.  Then, I want to add these pictures to the catalog that is currently active.  I want to add them without moving... l

  I did a search for .lrcat and all the catalogs were on drive G, as they are supposed to be.  However, there is an entry on the C drive that is marked as a MS Word file and it is called: Lightroom assessment.docx.  A paragraph seemed more likely guilty, but I don't know if I should change it and if so, what to change:

  The application folder: G:\Program Adobe Lightroom

  Library path: G:\Lightroom Backups\June2015\June2015.lrcat

  \Adobe\Lightroom

  Settings folder: C:\Users\mg\AppData\Roaming

  Thanks for any help or suggestions.  Is to make the process even very frustrating catalog help

  No matter that one of your hard drives, the catalog is on. If this catalog is one that is active, then it is one which will contain references to imported pictures. When you use the add in the import dialog box images are added to the catalogue of their current location. You cannot specify a different destination when you use this option. When you use the copy option, then you are able to specify a destination in the right column of the import dialog box. You must choose the appropriate drive and the main folder in the folder tree that appears. Then, specify the name of the subfolder in the highlighted area:

  

  You talked about change the destination of the catalog. It was a poor choice of words or you don't understand how the catalog works. The catalogue is available in one place. Normally it does not move anywhere unless you choose to do it manually. You can control the destination of your imported images, and Lightroom will import to the destination on any hard drive. But they are managed using the catalogue that remains in one place.

• Several files with the same name.

  Cannot publish to Business Catalyst because of a fatal error, where it is said "why do we have several files with the same name?  The website and all its contents have not changed in more than a year with the exception of minor changes to the wording so unable to understand what the error is encountered. Are there not better misdiagnosed at one point less for the files in question.

  The problem is the result of a mixture of case-sensitive and case-insensitive between how files within the .oam are put into interaction with and what is written in the muse_manifest.xml file during a re - download full compared to an incremental download.

  If all .oam packages files are tiny and the original .oam were replaced in Muse with the all new tiny .oams, then you should select Upload: publish all the files in the dialog box Options. From there, forward publication of incremental changes should work without errors.

• Return of the mistake of MUSE: why do we not have several files with the same name?

  Well - I thought I had all this worked and fixed, but I met the download error 'Why do we have several files with the same name' once again.  (I downloaded all the files several times today in order to 1) works the way it worked the last time and 2) get an OAM file that is not loading for some reason any load again and the download takes about an hour to transfer all the files manually.

  To recap:

  (1) an option "Upload only modified files" returns the 'Muse has encountered an error and closes.  Why do we have several files with the same name? "error just as before.

  (2) a full download will work but takes forever and is NOT a substitution for work changed files option.

  Please advise with possible solutions!

  -Dave

  Is it possible to have two .oam different files in different folders on your computer where the .oam files have the same name? I'm theorizing that there may be a bug in the treatment to ensure the folder created for a .oam placed on the server receives a unique name, particularly in the case of a partial update of the site on the server.

  Please send us the .muse file and all the files in .oam related to [email protected] along with a link to this topic for the context so we can attempt to reproduce this error and isolate the root cause. If files are larger than 20 MB, you'll need to use a service such as Adobe send & Track, Dropbox, creative cloud, WeTransfer, etc. file sharing. Thank you.

• Download error - why don't we have several files with the same name?

  Since the upgrade to 2015.1 a couple of days, I can't update my site using the feature "only changed files.  If I do I get this error, followed by the Muse stops completely.

  

  If I change the upload to 'all files and folders' everything is wonderful, even if it takes an hour to update the entire site rather than the usual 10 minutes.  Given that it will only grow of it is I hope it is on the radar of the Adobe + 400 current pages team.  What should I do?

  Well, I got the error to stop on my own.  I downloaded several times with a full scale 'all files' downloading and finally opened the site on my iMac to perform the update it.  Same configuration, the same file, even software - after uploading each file one last time on the other machine I can now do a upload "only changed files" to be.

  What the hell was that?

• travel-vmhost error - the destination of the specified parameter expects a single value

  I run in an error using Move-VMHost under PowerCLI version 5.5 R2 Patch 1 and 5.8 Release 1.

  There are 6 clusters in the data center.  To the host of the virtual machine between 5 of the clusters that I can run successfully:

  Get-VMHost vmhostname | Moving-VMHost Destination 'NOMCLUSTER '.

  But one group in particular always fails when it is specified as destination of the error message:

  The specified parameter "Desintation" expects a single value, but your criteria of name "cluster6" corresponds to multiple values.

  The only way I can get this working is to do:

  Get-VMHost vmhostname | -Move Destination VMHost (get-cluster | where {$_.name - eq "cluster6"})

  How 'cluster6' could correspond to several cluster names?  Is this just a bug in PowerCLI?  I started using PowerCLI more recently and noticed that some cmdlets can be a bit odd (for example had a few other problems with Get-VMHostStorage and found others have had similar problems with it).  I use this process of moving part of a more automated deployment script.  Prefer to make it as efficient as possible without having to insert the extra if possible Get-Cluster command.

  The Destination parameter on the Move-VMHost cmdlet accepts any VIContainer, not only the clusters.

  I suspect it could VIContainer one another with the same name.

  What this does?

  Get-inventory-name 'cluster6 '.

• The latest changes to the 'Upload to the FTP host' function has made it useless - no point using a program such as Muse if I can't easily and automatically upload work to the Web server.

  The latest changes to the "Upload to Host FTP" function made it useless - no point using a program such as Muse if I can't easily and automatically upload work to the Web server.  I use BlueHost webhosting with a main area and I have several domains with this account (such as subdomains or folders on this server) - with older versions of Muse when downloading pages it simply opened a warning window to tell me (what I already know) the Web site I am downloading does not point to the main domain BUT now Muse is trying to create a new folder separated into the root directory of the main domain. completely ignoring the directory path that I am giving him - useless!  Why do these crazy changes to the program - and so often - it is very frustrating as amateur ware!

  Hello Stephen,

  There are some problems with the download of ftp through Muse, who knows the team of engineers and those will be corrected in a future version of Muse. At this point, the work around would be to export the html code of Muse and then download via some third party client like filezilla ftp.

  I would recommend that you keep an eye on our page of release notes to get updates more about it - Release notes | Adobe Muse CC

  - Abhishek Maurya

• __How is a applies a layer of individual pshop on several files in the same position?

  __How is a applies a layer of individual pshop on several files in the same position?

  
  Here's an example - I 12 images of fruit bowl, and I want to put a separate image of an Apple (cropped) on the 12 in the same position (without zoom to the exact pixels)

  Thank you

  Hold down SHIFT and drag one doc to another. Or use the layer > duplicate and use the destination drop-down to select the good doc.

• Hyperlinks to PDF creation repeating the Destinations of the 1st Page, last hyperlink

  I created a document with several links.  Each hyperlink is named uniquely and is created by creating a "new destination" assigning the new hyperlink to a specific text.

  Yes, the checkbox 'include hyperlinks' has been checked before the PDF export.

  Interestingly, in the 3-page document when processing the entire document to PDF, the last link on the first page is repeated for all other links later in the following pages.

  If I export each page individually, all hyperlinks work as it should.

  Any suggestions?

  As I said, I think it's a bug, and it probably relates to having a lot of hyperlinks. Given that you can't fix in CS3, export a page at a time and combine them in Acrobat.

• Change the location of several pictures at the same time?

  I see how to change the location of a photo at a time. Is it possible to change the location of several pictures at the same time?

  Thank you

  Phil

  Select the photos and info - enter the location (or any other field of the info) and it is applied to all photos

  This is described in using Photos - a good place to get help with Photos

  View and add information about the photos

  To view or change information for the photos, you select one or more photos, and then open the information window.

  

  • Open the Info window: Double-click a photo to view it, and then click the Info button in the toolbar or press on command I.

  • Add or change information: Change the following.
    • Title: Enter a name in the title field.
    • Description: In the Description field, type a caption.
    • Favorite: Click the Favorites button to mark the photo as a favorite. Click the button again to deselect.
    • Keywords: Enter the keywords in the keywords field. When you type, Photos suggest keywords that you have used before. Press enter when you have finished a keyword. To remove a keyword, select it and press DELETE.
    • Faces: Click on and type a name to identify a face. Click on several times, and then drag the identifier of the face different faces to identify many faces in a photo.
    • Location: Enter a location in the location field. When you type, Photos suggest places you can choose. To change a location, you can search a different location or change the location by dragging a PIN on the map. To remove location information, delete it or choose Image > location, then choose Remove location or back to the original location. You cannot assign a location if your computer is not connected to the Internet.

  LN

• Delet several addresses in the drop-down list on the e-mail page

  on the page of the mail, the box where you put the address in I put the first letter of the address and a drop-down list box appears with several address of the person even all but 1 is false. I went to the address book, and there is only one address of this place.
  How can I remove all the wrong address in the drop-down list?
  Thank you
  Herbalifeman

  Look for these wrong email addresses in your address book and remove them.
  Make sure to look in all address books you may have, including the "collected addresses".

• Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Try to go here and see if you can add them to your Apple ID.