several execution errors in situations that worked almost perfectly before

Similar Questions

• CF gives error of application that works in Oracle

  The following query gives a 'not a valid month' mistake in CF, but works fine when in Oracle. This is happening more and more frequently. I also tried to launch the to_date() date string as well as the phase_one_launch date to_date(), but no change. This looks like it should be simple enough, but obviously I'm missing something. Please show me the error of my ways! Thank you!
  
  SELECT pa_code, dealership_name, apm.dealer_id, dsp_id, phase_one_launch launch
  FROM: apm_alerts, dm dealer_master apm
  WHERE p1_launch_admin IS NOT NULL
  AND apm.dealer_id = dm.dealer_id
  AND dm.primary_manufacturer_id = 2
  AND dsp_id in (1,3)
  AND phase_one_launch < 1 July 2006 00:00:00 '
  AND phase_one_launch > 1 June 2006 00:00:00 '

  If you use the tronque() function, you will not have to worry about the time portion of the date:

  Select * from tbl_mytable
  When trunc (my_date) = 1 October 06 ')

  Note the date format - this is the date format default for Oracle. You can also use the to_char() function to convert before the comparison:

  Select * from my_table
  where to_char (my_date, "mm/dd/yyyy") = 1 July 2006 ")"

  I hope this helps...

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• I have several items in my trash that I can't remove. I get the message "the operation cannot be completed because one or more required elements could not be found. (Error code - 43) "when I try to do.

  The operation cannot be performed because one or more required items be found.

  (Error code - 43)

  I have several items in my trash that will not delete. I get the message that precedes, when I try to do. I deleted successfully other files using "delete immediately", but these just won't. I also can not move out of the trash to another folder.

  I'm using an iMac with OS X El Capitan 10.11.6 operating system

  Have you tried the instructions in the order that they are arranged in you may not empty the trash or move a file to the Trash - Apple Support?

• I can not express outlook to work on this laptop. Emails from test provider sent e-mail that came on the old laptop, but not this one. Error code indicates that there is an error with the password.

  I can not express outlook to receive or send emails usning my other e-mail account.  Their support had me through each entry several times but I still have an error code indicating that my password is incorrect.  The provider to reset the password and I did the change in outlook and it says that the password is incorrect.  They suggested that there may be a software problem in my outlook express.  Your thoughts?

  Completely remove the account. Restart, and then add it again. Who help me? If this isn't the case, you can get enough to try a new identity?
   
  You may have a damaged identity especially if it's the default main identity. File | Identities | Add the new identity. Create a new one and try it. If all goes well, you can import your messages and address book from the old identity and delete it.
   
  Note: Do not use the main word in the name of the new identity.

• My HP officejet 4500 works very well on my laptop (my computer alone), but windows has an error message saying that the printer is not a dirver. How can I fix this message?

  My HP officejet 4500 works very well on my Toshiba laptop (my computer only and not shared) but windows has an error message saying that the printer driver.  How to stop this message?

  Visit the HP website and download the driver you need.

  Good luck.

• various error messages - cannot get old matrix printer that works with xp for the printer in windows 7

  I have a new pc with windows 7 - I have an old panasonic kxp 3696 PARALLEL port printer that works fine with xp - I bought a decoder directional bi to convert the port PARALLEL to the usb port and is connected to my lenovo m81 - computer came with pre installed epson fx series 1 136 driver in the Inbox (this is the driver of windows 7 recommended by panasonic for this printer)-I managed to print a test page and something of Word-, I then downloaded our accounting software and added an hp printer - in the process, I removed the usb connection and later reinstalled anbother port - since then I could not print all documents or bills - I uninstalled and reinstalled the printer - I deleted and created ports - initially the docs crammed into a queue for printing - I then changed the setting to print online and print test page new - now I send documents to print and they do not appear in the print queue - it seems to be multiple of the printer on the computer copies when I reinstall - also get a message that is not network printer (the printer is connected by usb) and another message00? 0000? etc.

  I used the printer add - local port - function and then create a new port that I called epson - someone can talk me through the process in detail.

  specifically what port should I use (local or create new)? I used the port usb - is that correct?

  If I print a test page? I would be able to print documents?

  If I get epson 1 and exemplary epson 2 - has actually deleted the printer driver?

  Please note I have contacted panasonic who can't stand the printer-I called epson that does not support the old drivers and lenovo that says it's a software problem talk to microsoft.

  We also run windows 7 64 bit in xp for the printer mode if so? How?

  Hello

  I suggest you to uninstall the printer drivers and then use the driver file that you want to install by using the procedure - below

  a. click Start, click Control Panel , and search for printers , and then double-click Printers.
  b. now, click Add Printer.
  c. Select Add a local printer and click create a new port.
  d. Select Local Port and click Next.
  e. type in "[\\computer name\printer name]"(sans les guillemets) for the Port name and click OK. ""
  f. follow the instructions to complete the installation. During the installation, when you are prompted to choose a good driver; Click the "disk".
  g. navigate to the driver file that you have on the computer, and then click OK. Now, check if the printer is correctly installed.

  I hope this helps.

• 0 x 80080008 and data prevention execution error message

  Question

  Prevention of encryption of the data-Microsoft Windows

  Applies to: Windows | Windows XP | Performance and Maintenance

  I use Windows XP SP3 using Mcafee Sercurity.
  This problem started after an update 19 Dec/2011 after an automatic update of Microsoft nearby.  I am not able to open files without using (run and browse) no applications will work. I tried a system restore to press F8 several times, nothing. I tried to open the files and programs in different ways, they all fail. No way to open my computer / control panel
  I don't know anything about technology on PC I just try to do the things that I see in www.microsoft.com< almost="" forgot,="" i="" have="" been="" able="" to="" use="" firefox.="" also="" cannot="" open="" control="" panel,="" cant="" open="" a="" thing.="" downloads="" will="" only="" work="" if="" they="" are="" in="" zip="">
  Any help that could do this thing works will be greatly appreciated.

  name: Windows Explorer
  Publisher: Microsoft Corporation

  clicked on what do I do?
  response
  RUNDLL an execption occurred while trying to run C\WINDOWS\System32\sysdm.cpl,NoExcecuteProcessException C:\Windows\explorer.exe

  Windows Explorer has encountered a problem and need to close. Sorry for the inconvience.
  more information, click here

  Error signature
  EventType PI: explorer.exe P2: 6.02900.5512 P3: 48025 C 30 P4:UNKNOWN P5: 0.0.0.0, P6: 0000000 P7: 0000000
  P8: c0000005 P9: 00000008

  technical information
  C:\DOCUME~1\Gamer\LOCALS~1\Temp\WER9860.dir00\explorer.exe.mdmp
  C:\DOCUME~1\Gamer\LOCALS~1\Temp\WER9860.dir00\appcompat.txt

  a popup appears and then IE asking if I want to run scripts

  Windows Update log

  2011-12-19 01:57:24:687 1532 e84 DnldMgr * update may not download due to regulations.
  2011-12-19 01:57:24:687 1532 e84 DnldMgr * DnldMgr: downloading new job [UpdateId = {5806952E-E863-466D-B840-87B92EC29F6B}.100] *.
  2011-12-19 01:57:24:687 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-5806952E-E863-466D-B840-87B92EC29F6B update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:687 1532 e84 DnldMgr * update may not download due to regulations.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr * DnldMgr: downloading new job [UpdateId = {D70E1388-2333-4CFE-88D1-C7F73735C532}.100] *.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-D70E1388-2333-4CFE-88D1-C7F73735C532 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr * update may not download due to regulations.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-5F538841-7F26-40E8-BECD-A7DB23309333 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-EE422CBA-EBF3-4D9E-AA65-CED2DFA526C2 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-E1A10857-639C-455E-9367-2B2DE9B18B89 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:703 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-7CF1F0A7-11C6-4C99-9931-9A564835026F update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-2634CE31-7829-405B-A061-4CC4B009EE2A update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-C3CCEEFC-ABE0-4A63-8903-82FFDD2BADE0 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-CA941FB2-4A4A-454D-8572-130F843937A2 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-0C9BA2D3-5012-44EB-8A0D-6B7CEB0A4CD3 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-CCDB4FB0-CC89-4D5E-9368-6A2BB1FDF331 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-13A236DB-B32A-4B54-B872-66BF72EE382B update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-C42D3771-F89B-433C-B81B-FC06DD795EE1 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-2F94F53F-4C17-4FBE-98A5-EDA26AE09994 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-8149C838-F942-47E6-A699-0AFF65015072 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-B8173122-D069-4D08-A042-44119E9F20F8 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-5806952E-E863-466D-B840-87B92EC29F6B update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.
  2011-12-19 01:57:24:718 1532 e84 DnldMgr rules: {7971F918-A847-4430-9279-4A52D1EFE18D}-D70E1388-2333-4CFE-88D1-C7F73735C532 update is "PerUpdate" regulated and can NOT download. The 9321 sequence vs AcceptRate 0.

  2011-12-19 02:09:22:000 244 1532 to THE # to THE: initialization of automatic updates.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.
  2011 1532 244 FATAL DnldMgr 12-19 02:09:22:125: DM:CBitsJob:SetCallbackHandler: SetNotifyInterface failed with 0 x 80080008.

  Sometimes I would be considered sober...  I'll try to work in some chatter as soon as POSSIBLE.

  Here's my standard order to determine the DEP from the Explorer errors:

  Note that as I collect things that people tell me cause their DEP problems (I add them at the bottom), it seems that you can get one of these... :)  You can consider ditching McAfee - at least temporarily, to use their tool and uninstall instructions official:

  http://service.McAfee.com/FAQDocument.aspx?ID=TS100507

  Don't forget to restart later and test.

  You can always reinstall McAfee later if you feel compelled to do it, right?

  When the Windows Explorer (not Internet Explorer) is wrong (especially when right click), begin to suspect third-party add-ons explore extension.

  Those who would be the Explorer extensions that do not belong to Microsoft.  This means that extensions that you have added.  Solution Explorer extensions are generally well and installation of certain applications will install extensions from Explorer solutions for you, give you a choice and sometimes they can be added without your knowledge when you install the new software.

  Solution Explorer extensions are sometimes added as a new right-click option, you see on folders and files (like the scan of this file, open that file, play this song...).

  If there is something in particular that you do during exploration that you know will be the cause of the problem, which will help focus on the problem and the help that you suddenly know, when you have found and corrected.  If you can get there when you want it, make an adjustment and then there is no message the next time you don't do anything, you do, you have found and corrected.

  First of all you need a way to see what modules explore you have installed now and a way to turn them off (not uninstall them) so you can understand that we are at the origin of the problem.  You can have a lot of extensions not installed Microsoft don't even know you about.

  Download ShellExView here to see what Explorer extensions you have loaded:
  http://www.NirSoft.NET/utils/shexview.html

  ShellExView does not install anything on your computer, simply of runs and displays.

  After launching ShellExView, under Options, choose "Mark non-Microsoft Extensions" and extensions not Microsoft will be pink, clear, but on some systems which is a difficult color to see, so click on display, choose the columns and move the column Microsoft closer to the top, so you can see on your screen without having to scroll left and right.

  Click on the column header for Microsoft sort display (by clicking on the column of Microsoft) then all the non Microsoft extensions are on top and easy to see.

  Non-Microsoft extensions would be things you have added (non-Microsoft) and are what you should be suspect.

  You can also Google the name of a suspect add-on and see if there is any success on the mistakes of the DEP and what other people have done about it.
  You can Google something like:

  Explorer XP crashing (you must fill in the name of add your suspect on.)

  See what kind of search results hits you get and are looking for solutions or situations that sound like yours.

  I'm not a defender of trial and error, but I can't think of another way to do...

  Right click and disable the non Microsoft extensions one at a time (or maybe in groups of 3-5 at a time), keep a list, so you can enable them again later if you wish. The result of the change is immediate and no reboot is necessary.  Test your failure condition.  If the Explorer starts to behave, you will know that an extension of this group of 3-5 is the culprit in order to start to enable them one by one until the Explorer fails again.

  If you recognize all the extensions that have been added or recently downloaded, start with these first.

  Don't forget - disabling the extension does not uninstall the extension - it is just disabled so you can always turn it on again.

  Disable them one at a time until your right click on do not generate an error, then restart and test again.  You have disabled the last extension would be suspicious.

  You can also just disable all non-Microsoft extensions, restart and allow them one at a time until you find the one that generates the condition.

  If you have a large number of extensions, you can disable them is small groups, 3-5 at a time instead of 1 at a time until your system starts to behave.  When it does not, you will know that the problem is one of the extensions of this small group and you can enable members of the Group at a time until the problem returns, then the problem is with the last extension that you enabled.

  The hope is that you will find an extension that caused the error, and then you can figure out what on this subject - either uninstall it or see if you can get an update of the author of the extension of their web page.

  I have not your problem, but I can when you toggle extensions, the extension is immediately disabled, so disable an extension does not seem to require a restart, but if you think that you have found the problem, I reboot and repeat the test in any case to be sure the problem disappeared.

  If you post your non-Microsoft extensions list, maybe someone will recognize it as a potential problem.

  If you find the offending extension that's the problem, please let us know what it is that I can add to my list.

  Some I know not: menu popup "CtxMenu Class" in the context of McAfee VirusScan menu.

  PowerDesk ZIP Extension was a culprit
  PowerDesk v7.x was a culprit

  PowerDesk 6 and 7 will crash Explorer if certain versions of Norton installed.

• Standyby.exe - bad picture message arising and several programs are now no longer works

  Original title: Standyby.exe - bad Image message 19/08/12

  Hello world

  I get a Standyby.exe - bad picture message arise. Several programs are now no longer works as iTines, Photshop and MS Word. In the message window begins C:\Windows\assembly\NativeImages_v2.0.50727... I have run several anti virus and malware programs normally and in safe mode, try the system restore, run registry cleaner programs and even took the computer to my local computer guy. All of this is without effect. Given the nature of the message and the type of programs not responding, it seems that I have a missing or corrupt file regarding execution of the images, but I don't know. Can anyone help. I'm pretty close to the stage where I could reinstall Windows, but I only want to do this as a last resort, given the amount of programming that I have to re - install. Oh - the system I'm using is Windows7 home premium, 32-Bit, RAM decent, proccessor and HD etc.

  Any help... Thanks Jim

  Hello

  1 did you changes to the computer before the show?

  2. when exactly you receive this error message?

  3 have you experienced the issue when you opened the 'Safe Mode'?

  I suggest you follow these methods and check.

  Method 1:

  Step 1: Try to restart your computer in safe mode and check if you receive the error message.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  If it works fine in safe mode, perform the clean boot and check.

  Step 2: Perform the clean boot using the suggestions mentioned in the link mentioned below.

  http://support.Microsoft.com/kb/929135

  NOTE: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

   

  Method 2: Run the tool (SFC.exe) System File Checker and verify the.

  Measures of the follow this link: http://support.Microsoft.com/kb/929833

  If the problem persists, I suggest you to bring observant event logs.

  Check Event Viewer for events, at the time, the problem occurs:

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

• Palm Pre crazy symptoms: 'phone in offline mode', won't charge battery, won't start, message error "an error has occurred that cannot be resolved.

  This is a long description of a series of problems with my new Palm Pre. You can search text to find your specific problem. There is no solution in my post. Looking for possible answers in future responses.

  I bought my Palm Pre 4 days ago and it arrived 2 days ago. Phone was working fine. Last night I plugged the phone and updated the operating system. After, I've selected "Done" and went to bed.

  -First set of questions: 'Phone offline', will not charge battery.

  In the upper left corner of the phone, there is the message "phone offline. Although the phone was in charge all night, it reads "battery of 26%. I called the general number of on the Sprint tech support and we tried the following things:

  (1) the phone reboots (press on and hold the power button / stop, then select 'Disable'. After setting down, hold down power button / power stop.)

  (2) to reset the phone (several ways - call tech support so that you do this properly)

  The individual Sprint and then sent me to another tech support person, likely to level 2.

  -Second series of questions: message error "an error has occurred that cannot be resolved;

  #2 Sprint tech support person had me also to restart and reset the phone in a number of ways. In his own words 'we tried all the palm pre stuff I know' and whenever the phone was insensitive. Often, we received the message error "the phone is in offline mode. We did a full erase and after that the phone will not re-start is no longer. At this point, the error message came up saying "an error has occurred that cannot be resolved" that referred me to www.palm.com for assistance. I think it's important to note here that this was not the typical error message (black screen with white letters) but rather the blue sky with a translucent box on background with white text.

  #2 Sprint tech support person then me connected with the support of the Palm and the dance continued. Yet once, we tried a whole bunch of reset and restart and the erasure of the options. Palm support asked me to go to: www.palm.com/rom to download WebOS Doctor, which I did. I downloaded the file. Although that was the case he had hold the button "volume +" and connect the phone to the charger. This caused a USB symbol will appear on the phone. When the record was complete, I got an error message which could not run the file. Palm tech support person seemed surprised. I mentioned that I was on a Mac and he said he couldn't help me. He me transferred to another person from Palm support that works with Mac users.

  Palm #2 tech support person advised me that I should have selected the download option 'mac' on www.palm.com/rom. I verbally walked him through the series of Web pages, telling him it is said that you need Windows (any version) or Mac (whatever version), but that at no time was there a possibility to download another WebOS doctor for different operating systems. After an exchange of views over she told me that she would have to have someone call back me tomorrow.

  -Third series of questions: phone stuck on the USB symbol.

  So for the moment, the phone is completely useless. Not fantastic. I started the mac on Windows 7 and downloaded WebOS Doc and received the same error message. I also ran Windows Vista virtually and received the same error message. Later this afternoon, I head into work to try the same thing on Windows XP.

  In the meantime, I got on this forum and found a thread that has provided a direct link to the necessary file:

  Palm.CDNetworks.net/Staging/ROM/webosdoctorp100ewwsprint.jar

  After downloading this file, I realized could totally be a virus, I was able to get WebOS Doc work on my computer. It took that I recharge the phone before, and now it's on the screen that says 'do not disconnect your phone' and the full file of 3%. Only... it was completed for almost 30 minutes to 3%.

  I hope that Palm will follow-up with me tomorrow, but I'm leaving on a business trip at 7:00 and I would love to have the thing work. All suggestions are welcome, even if you can just tell me how to get her think disconnected safely before my flight tomorrow. I want to get through security with my phone plugged into my laptop.

  Thank you.

  I picked up the phone at the local Sprint store and the sales ago replaced the phone. They were unable to understand what went wrong and, essentially, has declared a complete failure of the unit. I'm sorry that I'm not able to offer better news, but I hope that this info is useful to you.

• We have more than one PC connected to the same (IMAP) account, there is an error sending server and works as a single computer at a time.

  We have three computers to check the same email account (IMAP) and when more than one is not working and try to send a message is displayed:. 'Server offline [email protected] that the server may have dropped or there may be a network problem.
  Right next to Thunderbird on other computers, with only a computer connected to the error disappears, and everything works fine.
  When that happens, sometimes gives error when sending an e-mail, "error save message in sent" and the mail is not stored in the thunderbird or on the server, but is sent.

  Menu Tools > account settings > server settings > asvanced and reduce the number of connections from 5 to say 2 and see how it goes. I m the connection altogether on the total machines is the question can be reduced then should help.

  Seriously have several concurrent users is not a good way to manage an imap account.

• Code of RT that works ok interactively but breaks as a built application

  I just solved this interesting but frustrating problem in which a real-time program would go well interactively, but would be broken when run as an application built.  I thought I would document it here in case someone of another falls into the same trap.

  In short, I had several indicators on the front of the RT, which each was tied to a shared, Variable, which has the advantage of writing to the shared variable and indicator all in one easy process.  This has worked well in an interactive way, because of course that FP is responsible before the program is executed.  However once integrated in an application and execution at startup, the public Service does not load and for some reason, the application are broken and does not run.

  What was particularly frustrating, that's how it was hard to track down.  RT documentation seems to suggest that connection front panel is ok, and interactively that is.  The Front Panel Binding mass Configuration dialog box supports screw RT suggesting that it should be ok.  A question is not listed in the LabVIEW features not supported in the RT no indication of broken code was not given during the build process.  When I used the Application Operate/Debug and connected to the application of the RT, he would not be running and to show an arrow broken Run, but even with debugging enabled, there is no way of knowing what was causing the program to break.

  In the end, I removed parts of my code until I got a job request and then started putting things back in.  It turns out the only thing I had to change to get a work request was during dissociation of the lights.  The bonus is now, I reworked the writing of the shared variables to open the connection to them only once, instead of every time they are written - probably, it's faster, although I have not all a point of reference to show that.  Oh, and it's LV 2012, then, maybe, things have changed since then.

  Resolved for now!

• Several applications have frozen or stopped working after connecting to the server for a few minutes

  Hi all

  I am facing the problem with my windows server 2012 R2. After I connect to the server and leave it there for a few minutes:

  • Some of system applications such as device, power, system, etc. Option Manager are stopped working. When I opened them, I have nothing.
  • All my applications c# (.Net Framework 3.5 ~ 4.5) was an error 'could not load file or assembly 'my_reference_libraries' or one of its dependencies. The system cannot find the specified file. ». I'm sure that's not the error I can run the application correctly before this problem occurred.
  • When I open "Manager configuration SQL Server 2014", I get the error "the instruction at 0x0023ae20 referenced memory at 0 x 00000058. The memory could not be read. »

  Strange thing is when this is the case, I can open "Event Viewer" and after opening, everything back to normal. I can open applications, including my c# programs without any error. It's not just my guess that I tried this work many times. Opening every time the "Event Viewer" has solved the problem. There may be other applications system who will be doing that job, too, but I have not tried everything.

  In case the Viewer, I got tons of errors for:

  • GroupPolicy - Group Policy processing failed. Windows could not apply the policy settings based on the register of the LocalGPO Group Policy object. Group Policy settings will not be solved until this event is resolved. View the event details for more information on the file name and path that caused the failure.
  • DistributedCOM - the server {06622D85-6856-4460-8DE1-A81921B41C4B} is not registered with DCOM within the required time.

  What could be the problem? My user session froze? I get trouble solving this for several weeks already and still got no chance.
  Any help would be greatly appreciated!

  Please advise!

  Thank you and best regards!

  Hello

  Any recently installed application? Examine the cpu and memory use?

  Let me you suggest reviewing your material, including memory. Added new hardware recently? A updated driver recently? Please update hardware drivers.

  The following forum might be more appropriate for your question:

  https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

  I hope this helps.

  Kind regards

  Alberto Morillo
  SQLCoffee.com

• My Dell all-in-one 962 stopped printing all of a sudden. The error messages are that the computer cannot communicate with the printer.

  My Dell 962 All In One Printer suddenly stopped to print. I get an error message that the computer cannot communicate with the printer. The error message suggests that I unplug and plug back the power plug and the USB cable to the printer and make sure that there are no restrictions of firewall to the printer. I did what was suggested and still no printing. I have resinstaled the printer from the CD software, I got with the computer and also installed the latest driver using the software of the software upgrade wizard.

  and also installed the latest driver by using the Software Update Wizard software.

  That would not have been the best idea... but it is unlikely that the cause of your immediate problem.

  The next thread does not make much sense to me, but it describes a situation similar to what you described and the proposed solution is supposed to have worked.  Try it and see--> http://en.community.dell.com/support-forums/peripherals/f/3528/t/19483019

  I suspect that what really happens is that the driver has become corrupted.  In many cases, simply reinstall the driver is not fix things; you have to clean the old corrupt driver before installing the new.  Thus, it is more likely that the part "Uninstall" the related response is what is helping rather than playing with services... but go ahead and follow these directions, just in case.  In fact, I suggest that you run under first antimalware scanners before following the tips in the above link.

  If I had not found the link above, that's what I would have suggested (whichrequires that you have Windows XP):

  Often, but not always, the symptoms you describe are caused by a corrupt print job stuck in the queue or a damaged printer driver.  However before you clean things up, on general principles, that you can download, install, update and run full scans with each of these two free programs.

  MalwareBytes AntiMalware

  SUPERAntiSpyware

  Use the free version, not the free trials of "pro" versions  Pay attention during installation uncheck any prechecked boxes that would install some additional third-party programs.

  Do not run the scans at the same time.  Each scan will take a while.  Start one and go do a non-it chore.  Once the scan is finished, leave the program to deal with anything it finds.

  Once done, you can keep or uninstall programs, or both.  If you keep SAS, I suggest to change its default setting does NOT automatically when Windows starts.

  Uninstall all software from Dell to control panel > Add / Remove programs

  Download Microsoft Fixit 50126 impression: http://go.microsoft.com/?linkid=9662904

  Close all running applications (anything with an icon on the taskbar).

  Run the Fixit routine.  Note: The routine Fixit has two modes, light and complete.  It will run in full mode when you check the box "Reset the spooler to print on values."  This will remove all printers, so if you have any other printer installed, I recommend running the Fixit in full mode.  If you have other printers and you do not (necessarily) want to reinstall them, run the Fixit in light mode (box unchecked).  This may work anyway.  You must restart the computer after you run in full mode; you need not restart after the Chase mode.

  After the Fixit has executed and you have restarted if necessary, make sure that the printer is disconnected from the computer and run the installation software.  You will be asked to connect the printer to a suitable place.  You can use the CD that came with the computer or download the software here (which is relatively hard to find, the claims of the main page of the 962 product support it cannot find the drivers)--> http://www.dell.com/support/home/us/en/19/Drivers/DriversDetails?driverId=R89490

• Loading of the connected battery, do not... (found the solution that worked for my Dell Inspiron

  Well, the charger is plugged, but he says not charging. What happened twice. I would have thought bad battery or bad, but fortunately the first charger, that it took place just after buying a new hard drive. I did a hard reset on the battery and that worked.

  Now, it happened again. I tried resetting the regular battery, but that didn't work. I tried to uninstall the device and reinstall... did not work either.

  Curiously, what worked was this:

  I have had about 38% battery remaining. I unplugged the laptop computer power cord and the wall.

  I removed the dough. Computer has been cut.

  I wiped the connectors of the battery with a clean cloth, several times.

  I put the dough back in and turned the laptop on battery only.

  I plugged the power cord into the side of the laptop, and then into the wall outlet.

  Immediately, the laptop began to charge again!

  I don't know why it worked. Maybe some grumpy off he can know. When I tried to reset the battery, I turned off the computer before you take out the battery. Then he went out. Laptop with power cord is plugged in and powered it. Then stop down and placed battery. I turned her back... but nothing...

  It may have to do to have the laptop when you remove the battery, or place the power cord in back, or could be simply wipe cloth?

  Hi thelights007,

  Please share the system model and the installed operating system. The error "plugged not charging" can be caused for a variety of reasons as defective adapter or a faulty load Board.

  Try the below mentioned steps that can help fix the problem. Procedure for running flea power is:

  • Turning the system off.
  • Disconnect all external devices (printers, external hard drives, flash drives) of the computer.
  • Disconnect the power adapter and remove the battery.
  • Press and hold the power button for 20 to 30 seconds to release the residual charge of the laptop.
  • Reconnect the battery and the AC adapter.
  • Once the system is turned on and booted properly, replace the battery. Check whether you still receive the error.
  • Start the system BIOS by pressing the F2 key on the Dell logo screen when you turn on the system.
  • Press the F9 key to load the BIOS default settings. When finished, press the F10 key to save and exit. System will reboot. Check to see if the error is still there.
  • Try to wiggle the cable of the AC adapter / CC and check if it makes a difference.
  If it still does not work, spare parts may be necessary.

  I hope this helps. Please share the findings.