'Start' 'run '.
How can I access the functions of 'Start', 'Run' by using the key board
Press WIN key + r. "a programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
Tags: Windows
Similar Questions
-
About a week and a half, it started running very slowly with the spinning beach balls popping up all the time. This reminds me of how when I have too many tabs of the browser as in the past, but now, even with browsers had closed, open Word or Skype is really slow. (I'm sorry for any confusing formulation; I'm not very computer customer connected, unfortunately!)
Some of the things I've tried so far and EtreCheck below):
-safe mode
-detection of hardware problems (control + D)
-reset the PRAM
-using the utility disc for repair/first care; also check
-wipe the hard drive and reinstalling original OS X Lion (was still slow with beach balls; I tried to install OS X El Capitan to see if that would help, but installation could not finish)
-wipe the hard drive and restarting from a backup previous (one month before the problems started)
EtreCheck version: 3.0.3 (307)
Report generated 2016-09-11 17:51:16
Download https://etrecheck.com EtreCheck
Duration 34: 39
Performance: poor
Click the [Support] links to help with non-Apple products.
Click the [details] links for more information on this line.
Problem: Beachballing
Description:
also very slow in general
Hardware information: ⓘ
MacBook Pro (13-inch, mid-2012)
[Technical details] - [User Guide] - [warranty & Service]
MacBook Pro - model: MacBookPro9, 2
1 2.5 GHz Intel Core i5 CPU: 2 strands
4 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 2 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 2 GB DDR3 1600 MHz
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: en1: 802.11 a/b/g/n
Battery: Health = Normal - Cycle count = 1054
Video information: ⓘ
Graphics Intel HD 4000
Color LCD 1280 x 800
System software: ⓘ
OS X El Capitan 10.11.4 (15E65) - since startup time: less than an hour
Disk information: ⓘ
TOSHIBA MK5065GSXF disk0: (500,11 GB) (rotation)
EFI (disk0s1) < not mounted >: 210 MB
Macintosh HD (disk0s2) /: 499,25 go-go (349,39 free)
Recovery HD (disk0s3) < not mounted > [recovery]: 650 MB
HL-DT-ST DVD - RW GS31N)
USB information: ⓘ
Apple Inc. Apple keyboard / Trackpad
Computer, Inc. Apple IR receiver.
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Information crush: ⓘ
Apple Inc. Thunderbolt_bus.
Goalkeeper: ⓘ
Mac App Store and identified developers
Launch system officers: ⓘ
[loaded] 6 tasks Apple
[loading] 164 tasks Apple
[operation] 68 tasks Apple
Demons of launch system: ⓘ
[loaded] 43 tasks Apple
[loading] 161 tasks Apple
[operation] 85 tasks Apple
Launch officers: ⓘ
[loading] com.google.keystone.agent.plist (2016-07-12) [Support]
Launch of the demons: ⓘ
[loading] com.adobe.fpsaud.plist (2016-06-29)
[loading] com.google.Keystone.daemon.plist (2016-09-11) [Support] [loading] com Microsoft.Office.Licensing.Helper.plist (2011-03-10) [Support] Launch User Agents: ⓘ
[loading] com.valvesoftware.SteamClean.plist (2016-05-14) [Support] Internet Plug-ins: ⓘ
FlashPlayer - 10.6: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support] QuickTime Plugin: 7.7.3 (2016-04-05) Flash Player: 22.0.0.209 - SDK 10.9 (2016-07-22) [Support] Default browser: 601 - SDK 10.11 (2016-04-05) o1dbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-21) [Support] SharePointBrowserPlugin: 14.2.4 - SDK 10.6 (2012-10-03) [Support] googletalkbrowserplugin: 5.41.3.0 - 10.8 SDK (2015-12-12) [Support] Silverlight: 5.1.10411.0 - SDK 10.6 (2014-03-29) [Support] The internet user Plug-ins: ⓘ
Web of Google Earth plugin: unknown (2013-01-24) The Safari Extensions: ⓘ
AdBlock - BetaFish, Inc. - https://getadblock.com (2015-10-14) 3rd party preference panes: ⓘ
Flash Player (2016-06-29) [Support] Time Machine: ⓘ
Mobile backups: WE Automatic backup: YES Volumes to back up: Macintosh HD: Disc size: 499,25 GB disc used: 149,86 GB Destinations: X. backup [Local] Total size: 999,86 GB Total number of backups: 7 An older backup: 05/01/16 17:26 Last backup: 28/08/16 23:43 Size of backup drive: adequate Backup size 999,86 GB > (disc 149,86 GB X 3) Top of page process CPU: ⓘ
11% Firefox 4% kernel_task 3% hidd 2% sandboxd 2% WindowServer Top of the process of memory: ⓘ
1.00 GB Firefox 457 MB kernel_task 291 MB mdworker (15) 143 MB mds_stores 90 MB Microsoft Word Information about virtual memory: ⓘ
36 MB Free RAM 3.96 GB Used RAM (657 MB cache) 0 B Swap used Diagnostic information: ⓘ
Sep 11, 2016, 16:37:21 Self test - passed Sep 11, 2016, 09:20:57 ~/Library/logs/DiagnosticReports/suggestd_2016-09-11-092057_[redacted]. Crash /System/Library/PrivateFrameworks/CoreSuggestions.Framework/versions/A/support/s uggestd
Thank you in advance for your answers - I'm just at a loss for what could be the real problem!
You Mbps HARD drive is suspect. Start the recovery (COMMAND-R) partition and select in menu 4 disk utility. Run disk utility > first aid > repair.
Unrelated, but your battery has seen a lot of use. I suggest to replace.
Ciao.
-
My 27 "IMac just started running slow and has a hard time, opening of Yahoo and other sites
My IMac 27 "just started running slow and is struggling to open Yahoo and a few other Web sites. I bought it last August, but he has only started to slow market over the last two weeks. I have reset the pram, restarted with Cmd - R. I restarted in safe mode and as a guest and it still runs slowly. I have used Etrecheck, the only suspect think I wonder on "3.10 GB com.apple.WebKit.WebContent (5). What is webkit?
last week I installed 2 Apple airpot extreme and hard wired two airports and my mac, my wifi I and the entire system is running 5, speed, download upload, and ping 11ms. 8mbps 5.9mbps I uninstalled Silverlight, Lightroom and most of the apps I use, but I can't figure out the problem. Any ideas on what I can do to get my mac back to the current? I'm about to take my mac at the Apple store because she is still under warranty.
Kind regards
Rick
Top of page process of memory: ⓘ
3.10 GB com.apple.WebKit.WebContent (5)
698 MB kernel_task
Softwareupdated 475 MB
254 MB Solitaire
180 MB Safari
EtreCheck version: 2.9.1 (251)
Report generated 2016-02-03 22:56:23
Download EtreCheck from http://etrecheck.com
Time 01:18
Performance: Excellent
Click the [Support] links to help with non-Apple products.
Click [details] for more information on this line.
Problem: Another problem
iMac (27 inch, at the end of 2013)
[Data sheet] - [User Guide] - [Warranty & Service]
iMac - model: iMac14, 2
1 3.2 GHz Intel Core i5 CPU: 4 strands
8 GB of RAM expandable - [Instructions]
BANK 0/DIMM0
OK 4 GB DDR3 1600 MHz
BANK 1/DIMM0
OK 4 GB DDR3 1600 MHz
0/DIMM1 BANK
Vacuum
BANK 1/DIMM1
Vacuum
Bluetooth: Good - transfer/Airdrop2 taken in charge
Wireless: unknown
NVIDIA GeForce GT M 755 - VRAM: 1024 MB
iMac 2560 x 1440
OS X El Capitan 10.11.3 (15 d 21) - time since started: about 2 days
ST1000DM003 disk HARD APPLE disk0: (1 TB) (rotation)
EFI (disk0s1)
: 210 MB HD (disk0s3)
[recovery] recovery: 650 MB Macintosh HD (disk 1) /: 999,01 go-go (942,10 free)
Storage of carrots: disk0s2 999.35 GB Online
Apple Inc. BRCM20702 hub.
Apple Inc. Bluetooth USB host controller.
Apple Inc. FaceTime HD camera (built-in)
Hub keyboard Apple, Inc.
Apple Inc. Apple Keyboard
Apple Inc. Thunderbolt_bus.
Mac App Store and identified developers
/ Library/Application Support/org.pqrs/Karabiner
[loading] org.pqrs.driver.Karabiner (10.15.0 - 10.11 SDK) [Support]
[loading] 157 tasks Apple
[operation] 79 tasks Apple
[loading] 191 tasks Apple
[operation] 96 tasks Apple
[loading] org.pqrs.Karabiner.load.plist [Support]
[loading] A spot of Apple
iTunesHelper Application (/ Applications/iTunes.app/Contents/MacOS/iTunesHelper.app)
Carabiner application (/ Applications/Karabiner.app)
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000003.Solitaire
[ongoing] com.Apple.XPC.launchd.oneshot.0x10000007.Karabiner_AXNotifier
[ongoing] com.etresoft.EtreCheck.115232
[ongoing] org.pqrs.Karabiner.73632
Default browser: Version: 601 - SDK 10.11
QuickTime Plugin: Version: 7.7.3
Silverlight: Version: 5.1.41212.0 - SDK 10.6 [Support]
None
Time Machine not configured!
4% WindowServer
3% fontd
0% kernel_task
0% dock
0% cloudpaird
Top of page process of memory: ⓘ
3.10 GB com.apple.WebKit.WebContent (5)
698 MB kernel_task
Softwareupdated 475 MB
254 MB Solitaire
180 MB Safari
86 MB of free RAM
7.91 used GB RAM (1.03 GB being cached)
10 MB of Swap used
February 1, 2016, 14:05:24 Self test - passed
1 February 2016 13:47:18 / Library/Logs/DiagnosticReports/com.apple.WebKit.Networking_2016-02-01-134718_ [redacted].cpu_resource.diag [details]
System/Library/Frameworks/WebKit.Framework/versions/A/XPCServices/com. Apple.We bKit.Networking.xpc/Contents/MacOS/com.apple.WebKit.Networking
Is very slow, or just web browsing? Was - this slow until you have changed the network?
-
My MacBook suddenly started running slow
Reading this thread: my MacBook suddenly started running slow
I followed the instructions of Linc Davis to post the following are produced by the Terminal application and using the command:
syslog -k Sender kernel -k Message CReq 'Channel t|GPU D|I/O|find tok|n Cause: -' | tail | open -ef
The following text has been updated with the door...
Jan 29 06:47:19 core Mason-MacBook-Pro [0]
: cause of previous stop:-60 30 Jan 10:01: 18 localhost kernel [0]
: cause of previous stop:-60 30 Jan 10:19: 49 kernel Michael-MacBook-Pro [0]
: SSanadnbdobxox: Sandboxmdmwdowrokrekre (r(: 38838) 5md woden) YY (d1e) n (f1) I i/oAns/ppClialceatindar.apop/Cns/onCatelnentdasrer d/Ap-daplticaat lef-irleea-dr-edaatark. () / Mapp/acO38S/CCona7) lteentn sd/MaacOrS /. 30 Jan 10:19: 57 kernel Michael-MacBook-Pro [0]
: SSaandndbobox: x: mmdwodrwkeorkrer ((385387)) dendeyny ((1) 1) fifillee-read-r-dateaad-d/Aatppal ination/Applionscati/oGansme /GaCentme er. Capenp/Contetern.ats/pMacpOS Jan 30 22:52:48 core Mason-MacBook-Pro [0]
: nspace-Manager-unlock: found no token 11211 3 Feb 07:16:39 localhost kernel [0]
: cause of previous stop:-60 There was several abnormal stoppages in the last days. A negative stop code may indicate a hardware problem. The precise meaning of the codes is not publicly documented.
If you haven't already done so, you can try to reset the system management controller. Otherwise, or if the reset has no effect, see below.
Do a 'genius' one appointment at an Apple Store, or select another authorized service provider. You may need to leave the machine there for several days.
Back up the data on the internal disks before you turn on your computer to anyone. There are ways to back up a computer that is not fully functional - ask if you need advice.
If privacy is a concern, delete the partitions of data with the ability to write zeros * (do it only if you have at least two backups complete, independent, and you know how to restore on a blank disc from any one of them.) Do not delete the recovery partition, if it is present.
Keep your confidential data safe during the repair of the equipment
Apple recommends that you remove permission to a device in the iTunes store before serving.
* One SSD has no need to be set to zero.
-
Cannot download PC cd-rom - 1000 games. State of instructions ' cclick on start, run. But with windows vista, there is no race
By pressing the Windows key + R at the same time must bring up the box run. All the answers and suggestions are provided by an enthusiastic amateur and are therefore no explicit or implicit guarantee. Basically, you use my suggestions at your own risk.
-
When I go to start-run and type ipconfig it happens only for a second. How I keep reading?
Hello
- Click Start
- Click on run
- Type cmd and press enter
- In the black window resulting type ipconfig and press enter
Tricky
-
Start &#62; Run & Start &#62; Search does not.
When I click on start > run or start > Search he wants to create a shortcut on the desktop instead of opening. How can I fix it?
Hello
- What were the changes made before the show?
- How long have you been faced with this problem?
You can view these methods:Method 1:Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state.a. refer to the article below for the procedure safe mode in Windows XP
A description of the options to start in Windows XP Mode
b. it is a possibility that there is a startup program that is launched with a command line and it appears.
You need to perform a clean boot to find the program that is causing and then disable or remove.How to configure Windows XP to start in a "clean boot" State
Note: When you have finished troubleshooting, proceed as explained in the article to reset the computer to start as usual.I hope this helps.
Method 2:Iwould suggests a system full scan just to be sure.
Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss. -
I'm on XP, start - run is not find any program when I am logged in as a user, except for the Explorer and Taskmgr. It seems to work as a different user. I installed Microsoft Security Essentials as another user and completed a scan of the system. Still can't make it work. Pointers are appreciated.
I'm on XP, start - run is not find any program when I am logged in as a user, except for the Explorer and Taskmgr. It seems to work as a different user. I installed Microsoft Security Essentials as another user and completed a scan of the system. Still can't make it work. Pointers are appreciated.
See PML answer and I would add the following. Start | Run will not work for each program that you have installed. In general, it should work * only * for programs that are part of Windows.
See please tell what works when you type in the start menu. Run, and what does not.
-
XP SP3 with ALL critical & almost all critics not updated.
I'm trying to follow the instructions in MS Article 871122 OTF Windows to configure my wireless network settings.
But when I try to... Start > run > ncpa.cpl I get message error "file doesn't have a program associated with it".
Thank you
Steve
HDTV - calibration.com
Ok. That's what steps 1 and 2 of the instructions in KB 871122. You are now up to step 3.
Now we will solve the problem "file does not have a program associated with it". Go tohttp://www.dougknox.com/xp/file_assoc.htm . Read the explanatory text and then click the 5th from the top:CPL file Association Fix download the zip file, extract the reg file, then run it.
Because this association should not have broken, I suggest that you download, update and run
-
Where can I find the line start/run in the box start Windows
I want to use the Msconfig function but cannot find the start/run line in which to enter. When I hit the start icon (the microsoft logo), it is not clear. I'm looking in the wrong place. If this is the right place where it appears. If this is not the right place to be looking, where should I look?
Thank you
1. you can use the search box instead of running it. It all works the same.
2 in this case is to know how to restore/enable option run in the right side of the Start Menu:
Right click on the Start button > properties > at the top, click on Start Menu tab > click Customize > scroll to find command run, put a checkmark in the box > OKYou check Startmenu. Execution option should be there now.
-
Every day when I start running Amadeus seeling platform, it does not work.
Original title: Amadeus seeling platform
I want to wish Merry Christmas from my heart to your background...
Hey guys, I have a question about a software very often. I am currently working in Air ticketing Office in Italy. We issued tickets by the sales platform Amadeus. every day when I started running Amadeus, but it is not executed. I take a look in administrative tools > services and looked at Amadeus automatic update. but he was not running. When I clicked on start I could see an error 1053. Give me a solution.
Thank you. Good bye
Hi Susan,.
Thanks for posting your question in the Microsoft Community.
Merry Christmas!
According to the information, you face questions run Amadeus seeling platform.
Given that you have a problem with Amadeus, I suggest you contact The Amadeus Support for assistance.
Hope the helps of information.
If you need assistance in the future to resolve any issues related to Windows, post your query and we will be happy to help you.
-
Hi all
I was able to start / run SitesExplorer / ContentServerExplorer.exe (11.1.1.8.0) on Windows 7 64 bit
error starting turning
"This application has failed to start because its side by side configuration is incorrect. "
" Please see the application event log or use the command-line sxstrace.exe for details."
Picture AFP for reference "ContentServerExplorer_error.png".
Where as on my system still Sites runs correctly.
Kind regards
Anoop.
I had not myself but a quick search suggests this may occur if VC ++ and Visual Studio is installed also, causing the SitesExplorer to load one different version of the C++ runtime other than that it provides. Event log Windows could give more details.
Please see
http://www.chiefarchitect.com/support/article/KB-01046/
and
http://support.Microsoft.com/kb/2525435
for suggestions how to solve.
Phil
-
My 5s recently started running HOT
In the last two weeks, my 5s has started to run really HOT when using Safari and photo editing, HELP!
The battery may be defective. I recommend having the phone tested on an Apple Store as soon as possible.
-
I have a mini-tower with windows OS computer using the Firefox browser, it started to run slowly, 3Mbps, while on the same machine using for example the download speed is about 6 Mbps, which is what I used to get with Firefox. Oddly enough, I have another machine a net book with Linux OS and Firefox browser and who always gets a good speed to about 6 Mbps, which seems to point to the windows version of Firefox being the problem. I tried twice to reinstall Firefox, but there is no improvement, recently, there has been a couple of updates for Firefox and would like to know is possible to go back to an older version to see if that solves the problem.
I was so sure that I could be that the problem was with the combination of f-secure, windows vista and Firefox. The O.S. I can not change, Firefox I won't change if f-secure has drawn the short straw. Fortunately, I don't have a long contract with f-secure, I so uninstalled and moved, replacement works very well, too short life.
-
HP Photosmart and Microsoft Digital Image Suite 2006 will not start/run correctly
I meet what I think, it's a security problem or software problem and I need help.
I have Microsoft Digital Image Suite 2006 on my computer and a week ago, when I clicked on the icon to start the program, a message popped up box:
Run as
Current user (nameofcomputer\nameofowner)
box with a check mark next to this statement: protect my computer and data from unauthorized program activity
This option can prevent computer viruses from harming your computer or personal data, but selecting it might
cause the program to function properly.
My first thought was that the program had been corrupted by a virus or something, so I ran SpyZooka both Windows OneCare but they found nothing, and after that, I uninstalled Digital Image because I have the software and could re - install. I did all this and the program does not open and displays the above message. Then, he suddenly decided to let me do an edition on a picture but when I click on "save under" the entire program window has disappeared. That's what it is. I can get the program to open, but if I click on options such as you upload a photo or save an image, or if I click on 'Help' and try to look at the user manual, etc., the program immediately shuts down / disappears.
Today, I decided to use HP Photosmart for the first time (since I installed the printer last week), edit a few photos. The first time I clicked on the icon, the program window appeared and I would like to look at the features and watch the video tour. I got to download the updates I needed and when I tried to open HP Photosmart subsequently, the above message appears and the program would not open/run.
Help! What I did wrong to cause, it's a setting on my laptop? I don't know and all setting that I have authorized which would cause the message to appear with a check mark next to "protect my computer and data from unauthorized program activity.
Your PC has XP?
Here are some links I found by searching Help for you:
http://blogs.msdn.com/aaron_margosis/archive/2004/06/23/163229.aspx
http://blogs.msdn.com/aaron_margosis/archive/2004/09/10/227727.aspx
It will be useful.
Maybe you are looking for
-
Prevent firefox from crashing and opening of the pop ups
Windows 8.1 Firefox keeps crashing and the popups will drive you nuts!Can anyone help to / or should I return to windows 7?
-
I pay for HBO now to my Apple account. I wish only and cannot find their way to terminate a subscription. I'm not even where I subscribe. Any suggestions will be greatly appreciated.
-
I have a laptop HP probook 6560 b, Product number: LW953PA #ABG Windows 7 Professional 32-bit Service Pack 1 When I looked in the Device Manager, in another subfolder of devices, there is a yellow! for "unknown devices". Details of the hardware ID ha
-
HP 3050 J610: range of printers hp 3050 J610
My printer scans ok. But when I try to sace the scan it hangs up. I already rebooted the software nothing works. Suggestions are welcome. Joe
-
How to activate Windows Vista when the key is passed out on the laptop?
Hey my product key is missing on my laptop that juice I brought my companion, and he had to wipe so I used my nans recovery cd, now I can not activate the window which can do to activate it