several functions of transfer in a graphic bode

Similar Questions

• How to create a filter by using the function of transfer mathscript in labview

  Hi all

  I am currently designing a filter in labview using a Mathscript loop. The filter can be represented in the transfer function. I have attached the equation of transfer as well as its value function and the desire of graphic amplitude vs. frequency should I got to it. Also, here is the transfer function written in Matlab.

  B1 = tf ([57.5221845], [1 51,017077 205.1868]);
  B2 = tf ([1 0], [7.6991]);
  B3 = tf ([1 0], [14.32433403]);
  B4 = tf ([1 0], [137.6017]);

  F = B1 * ((1+B3)/((1+B2) *(1+B4)));

  Plot (F)

  I also change the encoding as Labview Mathscript does not support Matlab coding "tf" as function of transfer to "bilinear".

  I am facing problem to are:

  (1) cannot display the graph of the labvie filter.

  (2) cannot have sinewave as an entry in the filter.

  (3) the output can not be display in graphical form.

  We hope to have the earlier response of you guys. Thanks in advance

  I have attached the version 8.5

• Function button "Transfer" CTS?

  We run 1.7 on our endpoints CTS and the Midlet running on PSTN phones as well.  I've been asked for the ability to transfer a call from one piece of CTS to the other.

  Currently, it seems that the MIdlet control programmable keys that are presented on the phone, is that correct?

  I can't get a transfer softkey to appear on PSTN phones.  Is it normal?  Endpoints support CTS same call transfer feature?

  Thank you!

  Hello

  The soft keys are part of the MIDlet which are served by the codec software.  The function button 'transfer' is not included, as CTS endpoints do not support the call transfer feature.

  Thank you

  Paula

• Convert the function of transfer system model

  It is a practice "IF convert to transfer function of CDT.vi" in the system identification toolkit, but is a VI to go the other way? I used the id of system tools to estimate the TF from my system, but I want to compare it to the base of the first order response of the system to my real stimulus data.

  I can build a first TF command using the 'create order 1 model.vi CD' but I don't know how do to then turn this into a model of continuous system in which I can plug my real data.

  I am able to build a model system using 'IF create system model.vi' but it is a polynomial model, if there is a way to cajole this in the form of an order of 1st exponential base, it would be a great solution as well.

  (I'm experienced with LV, but my theory of control is rusty and I am totally new to CD modules and IF - then I apologize if this is a silly question)

  Hello

  You can use IF partially known continuous transfer (1st order) .vi model function and IF partially assess continuous known model transfer function (1st order SISO) .vi to estimate a 1st order TF, in which the parameters are defined as in CD create 1st order Model.vi

• Selection of blackBerry Smartphones of several sms and transfer as a mail

  Hello

  I would like to know how we can transfer a group of several SMS messages at the same time as a mail (a kind of chat history with send/receive with the same person - contact).

  In BBM, you can transfer the cat as a mail but I did not find the same option in SMS.

  Thanks in advance if anyone knows how to do this!

  Yes, he is spoken here several times...

  You cannot, within the native device software. You can get a third-party as DexRex application to archive your SMS to your PC. Or use Magic Berry to extract your SMS to a backup of the device.

• Several Bluescreens when you use the graphics card

  I've been making blue screens because of the VIDEO_TDR_FAILURE for some time now, and recently reinstalled windows to see if it would fix it. Unfortunately, it didn't, and I get more accidents all in game. So far, I checked my HDD with Seatools, entered back fine, RAM with memtest which was very good. (but only a couple going so far) The only thing that I have not been able to verify correctly is the graphics card. Right now, game will work if I use my integrated graphics to run, but even then it sometimes freezes.

  What should I do to troubleshoot my graphics card? I use a laptop, so opening the case is out of the question. I cleaned the dust and used several different discs, including my laptop was originally and the newest one. The temperatures are not the issue that the accidents have occurred anywhere between 50 to 70 degrees C. Can I still help out, or should I take the laptop in the computer store and let them look?

  Hans

  The pilot checked dumpster was related to your driver Audio MBfilt64.sys 4 + years of Creative Technology Ltd.  I'd install the most recent driver available.

  You can disable the auditor auditor/reset from an elevated command prompt

  Microsoft (R) Windows debug 6.3.9600.17029 AMD64 Version
  Copyright (c) Microsoft Corporation. All rights reserved.

  Loading dump file [C:\Users\Ken\Desktop\070114-15906-01.dmp]
  The mini kernel dump file: only registers and the trace of the stack are available

  Symbol of validation of the path summary *.
  Location of response time (ms)
  C:\Users\Ken\Desktop OK

  Symbol of validation of the path summary *.
  Location of response time (ms)
  Deferred SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Symbol search path is: SRV * H:\symbols* http://msdl.microsoft.com/download/symbols
  Executable search path is: C:\Users\Ken\Desktop
  Windows 8 Kernel Version 9200 MP (8 procs) free x 64
  Product: WinNt, suite: TerminalServer personal TerminalServer
  By: 9200.16384.amd64fre.win8_rtm.120725 - 1247
  Computer name:
  Core = 0xfffff801 'b161e000 PsLoadedModuleList = 0xfffff801' b18e8a60
  The debugging session: Wed Jul 2 02:35:24.384 2014 (UTC - 04:00)
  System Uptime: 0 days 0:00:19.201
  Loading the kernel symbols
  ...............................................................
  ................................................................
  ...................
  Loading user symbols
  Loading unloaded module list
  ........
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  Use! analyze - v to obtain detailed debugging information.

  Bugcheck A, {0, 2, 0, fffff801b168fb76}

  WARNING: Unable to verify timestamp for MBfilt64.sys
  ERROR: Module load completed but symbols can be loaded for MBfilt64.sys
  Probably caused by: MBfilt64.sys (MBfilt64 + 1817)

  Follow-up: MachineOwner
  ---------

  7: kd >! analyze - v
  *******************************************************************************
  *                                                                             *
  * Bugcheck analysis *.
  *                                                                             *
  *******************************************************************************

  IRQL_NOT_LESS_OR_EQUAL (a)
  An attempt was made to access an address pageable (or completely invalid) to a
  application interrupt level (IRQL) that is too high.  It is usually
  caused by drivers using a wrong address.
  If a kernel debugger is available, download the stack trace.
  Arguments:
  Arg1: 0000000000000000, referenced memory
  Arg2: 0000000000000002, IRQL
  Arg3: 0000000000000000, bit field:
  bit 0: value 0 = read operation, 1 = write operation
  bit 3: value 0 = not an enforcement operation, 1 = performance operation (only on chips that support this level of State)
  Arg4: fffff801b168fb76, address memory

  Debugging information:
  ------------------

  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff801b1974168
  GetUlongFromAddress: cannot read fffff801b19741f8
  Paged 0000000000000000

  CURRENT_IRQL: 2

  FAULTING_IP:
  NT! KeSetEvent + 1 c 4
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx]

  CUSTOMER_CRASH_COUNT: 1

  DEFAULT_BUCKET_ID: VERIFIER_ENABLED_VISTA_MINIDUMP

  BUGCHECK_STR: AV

  Nom_processus: System

  ANALYSIS_VERSION: 6.3.9600.17029 (debuggers (dbg). 140219-1702) amd64fre

  TRAP_FRAME: fffff880031fd960-(.trap 0xfffff880031fd960)
  NOTE: The frame trap does contain not all registers.
  Some registry values can be set to zero or incorrect.
  Rax = 0000000000000000 rbx = 0000000000000000 rcx = 0000000000000000
  RDX = 0000000000000000 rsi = 0000000000000000 rdi = 0000000000000000
  RIP = fffff801b168fb76 rsp = fffff880031fdaf0 rbp = 0000000000000000
  R8 = 0000000000000000 r10 = 000000000000f28e fffff88003041180 = r9
  R11 = fffff880031fdb00 r12 = 0000000000000000 r13 = 0000000000000000
  R14 = 0000000000000000 r15 = 0000000000000000
  iopl = 0 nv in pe of na EI pl nz cy
  NT! KeSetEvent + 0x1c4:
  fffff801'b168fb76 b 488 09 mov rcx, qword ptr [rcx] ds:00000000'00000000 =?
  Reset the default scope

  LAST_CONTROL_TRANSFER: from fffff801b1698369 to fffff801b1699040

  STACK_TEXT:
  fffff880 '031fd818 fffff801' b1698369: 00000000' 0000000 a 00000000'00000000 00000000'00000002 00000000'00000000: nt! KeBugCheckEx
  fffff880 '031fd820 fffff801' b1696be0: 00000000 00000000' fffff880 '1bdc7178 00000000 00000000' fffff880' 031fd960: nt! KiBugCheckDispatch + 0 x 69
  fffff880 '031fd960 fffff801' b168fb76: ffff93a6 ' f5176c5f fffff801 'b16bed9f fffff980' 0bb2cea0 fffffa80 ' 0d0148b0: nt! KiPageFault + 0 x 260
  "fffff880 '031fdaf0 fffff880' 08f52817: fffff880 00000000' fffffa80 ' 00000008 fffffa80 ' 0c1223d0 00000000'00000080: nt! KeSetEvent + 0x1c4
  fffff880 '031fdb60 00000000 fffff880': fffffa80'00000008 fffffa80 '0c1223d0 00000000 00000080' fffffa80' 0f891ab0: MBfilt64 + 0 x 1817
  fffff880'031fdb68 fffffa80'00000008: fffffa80'0c1223d0 00000000 00000080' fffffa80 '0f891ab0 fffff801' b1c67b64: 0xfffff880'00000000
  "fffff880 '031fdb70 fffffa80' 0c1223d0: 00000000 ' fffffa80 00000080"0f891ab0 fffff801' b1c67b64 fffffa80 ' 0f891ab0: 0xfffffa80'00000008
  fffff880 '031fdb78 00000000' 00000080: fffffa80 ' 0f891ab0 fffff801 'b1c67b64 fffffa80' 0f891ab0 fffffa80 ' 0f891ab0: 0xfffffa80'0c1223d0
  fffff880 '031fdb80 fffffa80' 0f891ab0: fffff801 ' b1c67b64 fffffa80 '0f891ab0 fffffa80' 0f891ab0 fffffa80 ' 0c1223d0: 0x80
  fffff880 '031fdb88 fffff801' b1c67b64: fffffa80 ' 0f891ab0 fffffa80 '0f891ab0 fffffa80' 0c1223d0 fffff801 ' b196e800: 0xfffffa80'0f891ab0
  fffff880 '031fdb90 fffff801' b1c67917: fffff801'b18b3a50 00000000 00000080' fffff801 'b18b3a50 fffff801' b196e880: nt! ViPendingCompleteAfterWait + 0xc4
  fffff880 '031fdbd0 fffff801' b1640521: 00030038'00010001 00000400'000001 c 8 00000000 00000000 ' 0000228 b'00000003: nt! ViPendingWorkerThread + 0x2c
  fffff880 '031fdc10 fffff801' b167edd6: fffff801 ' b1914180 fffffa80 '06b19b00 fffff801' b196e880 fffffa80 ' 06ad6940: nt! PspSystemThreadStartup + 0 x 59
  fffff880'031fdc60 00000000' 00000000: fffff880 '031fe000 fffff880' 031f8000 00000000'00000000 00000000'00000000: nt! KiStartSystemThread + 0x16

  STACK_COMMAND: kb

  FOLLOWUP_IP:
  MBfilt64 + 1817
  fffff880'08f52817?              ???

  SYMBOL_STACK_INDEX: 4

  SYMBOL_NAME: MBfilt64 + 1817

  FOLLOWUP_NAME: MachineOwner

  MODULE_NAME: MBfilt64

  Nom_image: MBfilt64.sys

  DEBUG_FLR_IMAGE_TIMESTAMP: 4a7267b0

  FAILURE_BUCKET_ID: AV_VRF_MBfilt64 + 1817

  BUCKET_ID: AV_VRF_MBfilt64 + 1817

  ANALYSIS_SOURCE: KM

  FAILURE_ID_HASH_STRING: km:av_vrf_mbfilt64 + 1817

  FAILURE_ID_HASH: {984c922a-7f81-464e-cf02-f67be39b2b6a}

  Follow-up: MachineOwner
  ---------

  7: kd > lmvm MBfilt64
  start end module name
  fffff880 '08f51000 fffff880' 08f5f000 MBfilt64 T (no symbol)
  Loaded symbol image file: MBfilt64.sys
  Image path: \SystemRoot\system32\drivers\MBfilt64.sys
  Image name: MBfilt64.sys
  Timestamp: Wed Jul 30 23:40:32 2009 (4A7267B0)
  CheckSum: 0000FF02
  ImageSize: 0000E000
  Translations: 0000.04b0 0000.04e4 0409.04b0 0409.04e4

• bug in several functions of IMAQ vision mask

  Some functions IMAQ Vision bad work if you use the image source as the mask. I keep running into this bug in IMAQ Vision, Vision functions exhibit this behavior, and others do not. It is not documented in job descriptions. Even if it were, it would still be a bug. Example:

  1. create an image source U8 containing zeros and nonzero values.

  2. son of the image in the entry source and IMAQ mask entry quantify and return the value of % of the global report to see what percentage of pixels are different from zero.

  The answer is wrong. If you copy the image in a separate image first and distinct picture of wire in the input mask, you get the right answer. See attached VI for building

  

  See you soon,.

  -root

  If someone knows a way to return the number of pixels not dummies in an image without duplicating the image in memory, please post the method here so I can mark it as a solution. I find that using IMAQ getpixelvalue in a double loop is extremely slow, even with a shift as a counter register.

  Using the histogram IMAQ VI seems to work (with no mask image)-the first index of the returned histogram array is the number of zero pixel, so the sum of the table no less (or less area this) is the number of pixels non-null.  The VI has the same bug with the image of the mask (and I agree with you that document a bug does not correct!) but at least you can use for this problem.

  Cheers ~ Greg

• Writing data to a file of several functions of reminders.

  Hello

  I'm new to LabWindows and I try to save test data in a file where my project directory. I was able to save the data to test the function main cvicallback in result.txt but not the test data of another cvicallback function that were called by the function main cvicallback in result.txt. Can someone tell what I'm doing wrong here? Here's what I have in the main call feature cvi back.

  GetProjectDir (path);
  MakePathname (path, "result.txt", path);
  FID = fopen (path, "a +");

  status is fprintf (fid, 'Test data' or hand CVICallback message);.

  fclose (fid);

  And here's what I have in the other cvicallback who was called by the main function of cvicallbak.

  FID = fopen (path, "a +");

  status = fprintf (DIF. "The data to test the CVICallback another message");

  Thank you

  Yuna

  Yuna:

  Do you get any error messages?

  How is the second function called?  Are you sure it is called?  You can set a breakpoint on one of its lines of code to make sure.

  You must post more code to get the bigger picture.

  Is the overall or is path - this local to your hand?

  If pathname is local, how it is passed to the second function?

  You close the file in your second function?

  I'm guessing that it's just a typo, but the fprintf in the second function shows a period after that IDF and there should be a comma.  You are better to paste the code in your message instead of having to retype.

• Non-functional processor DV7 - what a graphic problem?

  Hi all

  Edit: I think that it maybe the wrong section for this so I she published more than crash & block but since I saw some views on this one, did not delete in case someone was following this so leave it here for now. Administrators can remove if necessary.

  I have a product number, dv7-4273us: XZ295UA #ABA. Bought July 11 or 15th, 2011.

  Current problem:

  Saturday, August 16, 2014, I visited a friend to download far cry 1, 2, 3 and the DLC via steam. We left my computer download and went out. On our return 2 hours later, when I tried to make out the hibernation mode, it does not start and the caps lock light kept flashes once, indicating a CPU failure according to the error code to connect to this site.

  Performed troubleshooting:

  I checked the plug and discovered that the taken light was red, so I went taking points, and the 2nd which shine white.

  Connected to an external monitor no dice.

  noticed that the light on the drive on the side right hand turns red, so tried the hard reset - removed the battery and tried to start it with just the connected plug, he came but it's same - caps lock flashes indicating once cpu failure.

  Previous problems:

  So far, the only problem I had with the computer was that full screen, sometimes the light blue light and I would not be impossible to access anything. I would be put to sleep to get it out or restart.

  My Questions:

  (1) could download have hurt the CPU?

  1 (b) if I ran out of har of disk space to download making the failure of the cpu?

  (2) the graphic problem I had known would be the cause of the failure of the cpu?

  2B) if I replace the map move the cpu would resume the feature?

  (3) is anyway to get the laptop working again without having to buy a new processor?

  (4) I have used my computer plugged into a surge protector, but when I visited my friend was firectly plugged into the wall, he suggested that the computer overheating. Is it correct?

  4 (b) but do not tell the flashes, could something else have been damaged?

  (5) it is just better to buy a new computer and forget fixing it? I can't afford it, but I'll ask just in case.

  Thank you in advance for your help, much appreciated!

  Note: I'm not in the United States, I'm in Barbados, so I do not have access to online services like amazon - they often don't ship here, and I won't be able to get my computer to any physical location in the United States for repair.

  Hello

  You should be able to order a replacement CPU from the laptop. This would occur in the maintenance and Service guide (which is in my previous post). It can be a stand-alone item however, some laptops, it's part of the system board replacement.

  I hope you're able to help.

• "Group Policy" block several functions and there is no way to fix it

  When I try to change some features/functions on my Win7 system, the operating system blocks attempts, telling me that "group policy" prevents me from doing what I want and to consult my "system administrator".  Because my house is not a system administrator or IT Department, this suggestion is unnecessary.  The latest incident was when I tried to add/modify one of the desktop gadgets.  When I search the online group policy problem, I'm advised to run gpedit.msc but program that causes an error, "MMC could not create the snap."

  How can I get gpedit.msc to work or to disable the reorganize of group policy on my Win7 Home Premium system? (I have already mentioned the UAC level 'None' and my profile the user has administrator rights).

  Hi Peters4,

  Thank you for visiting Microsoft Answers!

  You may need to remove some snap-ins to the console MMC Snap.

  To do this:

  1. click on start, in the box, type start research "mmc", right-click on mmc, and then click Run as administrator and press ENTER.

  2. click on "file-> add/remove snap-ins."

  3. in the to ' Selected Snap-ins box, click on and remove all entries except "the Console root.

  You can consult the following link: http://windows.microsoft.com/en-us/windows-vista/Microsoft-Management-Console-snap-ins

  Concerning
  Divya R - Microsoft Support Engineer.
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Optimization, so or several function calls?

  Which one would be best?  This is the code that must decide what to do with each increase in decimal, 10/100/1000... up to 1 m.  'value' increases by 1 whenever an event occurs, if it's important to decide who is most optimal

  I think that the first would be the best way to do it, with multiple functions?

  for (var x = 10; value % x == 0 && x < 1,000,001; x *= 10){
   this[ "functionName_" + x.toString() ](x);
  }
  
  
  
  

  or

  for(var x = 10; value % x == 0 && x < 1,000,001; x*=10){
    if(x == 10){
     //do 10 effect
    } else if (x == 100){
     //do 100 effect
    } else if (x == 1000){
     //do 1k effect
    } else if...{
     //all values up to 1m
    }
  }
  
  
  
  

  Bingo, the more of the less successful appeals, as it gets.

  Your best bet if you really need Super optimization it is to test to do a test of pressure, but in general, except if there is crazy heavy lifting where functions, is not watch much (until it does).

  So, I would first look at the code it fires like your not getting a very complex logic. Personally, I think that your first solution is very elegant, even if a function is a little more taxing (in theory - as it all depends on what happens in the script executed).

  If its really critical test both and see what works best.

• Several function returns

  Hello

  I would like to know if there is a way to return more than one result of a PL/SQL function.

  I wanted to write a single function in a package that returns the total value, 3 results, the amount and the average value, but when I do something like this:

  FUNCTION FNC_OPEN_TITLES (P_CITY VARCHAR2) RETURN NUMBER IS

  NUMBER OF V_MAX_VALUE;

  NUMBER OF V_QTD;

  NUMBER OF V_AVG_VALUE;

  BEGIN

  FOR VREG IN (SELECT...)

  LOOP

  V_MAX_VALUE: = V_MAX_VALUE + VREG. VALUE;

  V_QTD: = V_QTD + 1;

  V_AVG_VALUE: = V_MAX_VALUE / V_QTD;

  END LOOP;

  RETURN V_MAX_VALUE;

  RETURN V_QTD;

  RETURN V_AVG_VALUE;

  END;

  
  

  Then, when I want to run it:

  SELECT PCK_NAME. FNC_OPEN_TITLES ("CITY NAME '");

  FROM DUAL;

  Only the first return appears, the V_MAX_VALUE.

  So, is there a way to show online single run all my returns?

  Thank you very much.

  You should use a collection.

  Create Type List_Num_T as VARRAY(3) OF NUMBER
  /
  

  FUNCTION FNC_OPEN_TITLES (P_CITY VARCHAR2) RETURN List_Num_T IS
  v_ret_value List_Num_T := List_Num_T(0,0,0);
   BEGIN
        FOR VREG IN (SELECT ...)
        LOOP
                 v_ret_value(1) := v_ret_value(1) + VREG.VALUE;
                 v_ret_value(2) := v_ret_value(2) + 1;
                 v_ret_value(3) := v_ret_value(3) / V_QTD;
        END LOOP;
        RETURN v_ret_value;
  END;
  

  Code is not tested

  Kind regards

• Can I add several function calls application CreationComplete?

  Hello

  I need to call two functions when the application is launched. How can I do this?

  Thanks in advance.

  POOJA

  I think what said Sri is that you try to process the result data just after the call to the function that sends the request.  HTTPService calls are time consuming, so you can't expect to have the results for the following line of code.  Instead, you addEventListener to hts to listen to a RESULT event.  In the event handler, do you the things you have coded to func1.  Like this:

  
  http://www.adobe.com/2006/mxml" xmlns:Components = "com.hillelcoren.components.*" creationComplete="CreationCompleteHandler()" layout="absolute">
  
  
  
   
  
  
   
      
  
  

  This is the basic idea.  You want a default event handler to intercept the events of the fault where the file was not present, etc.

  In this way, you make sure that the result is back before trying to process the data.

  -Marty [ http://www.theflexguy.com ]

  The useful answer? Please mark it as such.

• implementation of a function of time transfer real Labview program

  Hello

  I want to spend my control signal U through the 146 function /(S+276) for U_filtered

  How do I?

  I tried a low-pass filter, but I have the same results in comparison with Matlab.

  I mean I want to have:

  U_filtered = 146 /(S+276) * U.

  I have attached a picture for the signal U (yellow) and U_filtered (pink) in Matlab.

  I want to use in a real-time application

  Thank you

  How you implement the function of transfer in labview?

  I think this should be a separate implementation and maybe you already do. So forgive me if this is something you already know.

  Please see http://en.wikipedia.org/wiki/Low-pass_filter#Discrete-time_realization for an excellent time discreet introduction, low-pass filters.

  Essentially, you have to implement a discrete equation to achieve this. Something like:

  y(k+1) = 0.53 * alpha * x (k) + (1-alpha) * y (k)

  where alpha is related to the low-pass frequency and the frequency of sampling by alpha = flp /(fs+flp), flp is the low frequency of success and fs is the sampling frequency.

  In your case, flp = 276 and fs, it's whatever you choose to implement: it is the speed at which your loop runs on the RT or the FPGA or whatever. If speed is not a problem, I recommend 5000 rad/s or above as a starting point.

  The factor of 0.53 above is just the gain of the filter described you 146/276.

• Problem of transfer function

  Hello
   
  I created this function to transfer in Labview. But I realized that a small entry value (in my case, I used 0.0014) will produce a different result to compare with that of Matlab. I couldn't understand what the problem is. Could you help me in this?

  Attached are the LabVIEW and Matlab files I created.

  FYI, I used 2009 LabVIEW and Matlab R2007b.

  Thank you

  The input parameters used by the control and the Simulation Module does not solve the problem you have. This value, which "walk" down and swinging is wrong because you only have a first-order model, and as you know, you should expect a first order response, similar to a capacitor taken from a step response. If you change the maximum size step at 0.01, you should get the answer expected that converge to 0.0014.

  This shows how simulation can be misleading if you do not have an idea of what to expect from him and, above all, no simulation cannot substitute for knowledge or intuition of the expert developer. You should always validate your simulation results and convince yourself that you are getting good results, any package or seller you have.