HP ENVY Phoenix 810-209 Deskto: network does not work

Similar Questions

• Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should.

  Someone in the building uses Apple can 790-795 network this person hack me and who is? Berlin writes. Very often, I notice that my network does not work as it should. Thank you. I'm really not sure if it's true that Apple can´t be hackend? First because I use Google and Google mail on the same computer.

  Someone in the building uses Apple can 790-795 network this person hack me and who is?

  Wi - Fi networks will be displayed in the menu OS X Wi - Fi, including those created by other Apple routers. It's normal. It does not necessarily indicate that users connected to these networks can connect to yours. In particular, if you use a wireless password and change it often.

• Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Once I changed my ISP my computer network does not work and does not recognize my router lynsys

  Hi George,.
  Please go to the Microsoft Community Forums.
   
  1. do you get an error message?
  2. do you have the internet connection wired or wireless?
  3. What is the brand and model of the computer?
   
  I suggest to refer to the links and follow the steps in the articles:
   
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help?T1=Tab03#network-problems=Windows-XP&V1H=win8tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1
   
  Resources for the resolution of the problems of modem in Windows XP
  http://support.Microsoft.com/kb/308022#top
   
  How to troubleshoot wireless network connections in Windows XP Service Pack 2
  http://support.Microsoft.com/kb/870702
   
  How to reset the Protocol Internet (TCP/IP)
  http://support.Microsoft.com/kb/299357#appliesTo
   
  If the problem persists, contact the Internet service provider for assistance.
   
  I hope this helps.

• The administrator password for all computers on the network does not work for ONE of the computers on the network

  original title: the computers of network/administrator password

  The administrator password for all computers on the network does not work for ONE of the computers on the network. I need to log on as an administrator to install software, but the password does not work. It works on other computers, but not this one. How is this possible and how can it be solved?

  Hello
  Microsoft technical support engineers cannot help you recover the passwords of the files and Microsoft who are lost or forgotten product features. For more information about this policy, please refer to the below sticky

  http://social.answers.Microsoft.com/forums/en-us/vistasecurity/thread/3eba3150-8742-4264-be9f-0daaad2282cd

• Networking does not work! Help me ASAP!

  Recently, I got my motherboard replaced due to a technical problem and now networking does not work... I have tried re installing the drivers but nothing works...

  What should I do now? BLUETOOTH WORKS FINE

  DETAILS:

  Dell inspiron N5420 laptop

  OS: Win 7 Ultimate 64 bit

  Qualcomm ethernet drivers

  I finally figured it out... it's a hardware problem and I would replace... Thanks for all the suggestions

• WANT to Phoenix 810-210nj: my computer does not detect my TV card

  I recently tried to install a TV (Hauppauge 1200) card in my office, I tried in two different locations, it was not detected by the computer.

  Is it possible the slots do not work, or is there another problem.

  The card works in my old hp Windows vista desktop.

  Any help would be appreciated.

  Hello @abeavi,

  I understand that you are having problems, install your Tuner TV WinTV - HVR - 1200 MC PCI - Express on your desktop PC HP ENVY Phoenix 810-210nj running 8.1 for Windows 64 - bit. According to WinTV Media Center Kit Quick Installation Guide for Windows Vista Home Premium and Vista Ultimate, this card is made specifically for Windows Vista, and I doubt that Windows 8.1 will know that it is there.

  If you need additional support on this map I recommend you to contact Hauppauge.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• I have a laptop hp envy dv7 - 3723cl, the simple pass does not work

  My simple pass does not work. I have check the biometric device, the software is up-to-date, and it gives me an error code 19.

  On my installed programs I do not see the simple pass program is no longer.  How can I get the correct software to reinstall?

  Help, please

  Hi @GStefanakis ,

  Welcome to the HP Forums!

  It's a great place to find answers and information!

  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I was unable to locate specific information about a desire dv7 - 3723 cl.

  How can I find my model number or product number?

  Here is a link on technet.microsoft.com that can help.   Code 19: Windows cannot start this hardware device because its information of configuration (in the registry) is incomplete or damaged

  You can try a system restore to a date well known.  Using Microsoft System Restore (Windows 8)

  If the above did not help, I uninstall and reinstall the software Simplepass.  Using the Recovery Manager to restore the software and drivers (Windows 8)

  I hope this helps!

  

• HP Envy 17: HP Envy 17 Notebook Synaptics click & drag does not work

  My Synaptics-click & drag does not work. When I click on an icon it will highlight, then I click on the new icon and drag, and it do not drag. If I manual pushes the lower left corner of the Tablet and make it work. Sometimes it works but 90% of the time it does not work. The problem makes this laptop a laptop of poor and done really click and drag a pain.

  I deleted the driver and installed the latest driver HP Synaptics for my laptop than a couple of times and no luck. I even downloaded the Synaptics ' generic driver for win 8.1 "and it's worse. I can see why there are so many people not loving is not this Synaptics click on the button and I would certainly not buy another if this is not resolved. All other synaptics features work except this one.

  Any help would be greatly appreciated.

  REB

  Figured it out. My mistake. Must click twice VERY quickly and hold to drag on the second. I have been to much too much time between clicks and it wouldn't hang in the window or icon. Hope this helps others who may have difficulty with this.

• Network does not work after Windows 2000 SP4 P2V

  It has been a roller coaster get this virtualized machine.

  A little history: this machine is Windows 2000 SP 4 with update Rollup 1. After you install the Update Rollup 1, virtualization tried it and it gets to 97% and then I get the message error "vmware agent has encountered an error. When I try to start the machine, I get a BSOD with error inaccessible_boot_device.

  After reading some discussions fo I found a solution of reconfiguing the virtual machine then it will start. So now, I have a virtual machine that will start.

  Now my problem is that networks do not work. I removed the network card, has added a new, tried static and dhcp, through the Add/Remove programs and uninstalled all the devices HP and Compaq, went into Device Manager and deleted all drivers HP and Compaq or component, rebooted countless times and I am still ending up with no network connectivity.

  The network card on the computer virtual says it is connected and he says is to receive, but not send. It is not pulling a DHCP address and a static address gets no where also.

  I have more than 50 virtual machines so I know this isn't a problem with my network, it must be on the virtual machine itself. I don't know what else to try, and I'm open to suggestions.

  Thank you!

  Have you tried to repair the winsock?

  1. Go in Start > run, type: netsh int ip reset c:\resetlog.txt

  2. Restart your computer and you're done.

  3. Follow the steps below if you have XP SP2 (this only works on windows XP SP2 and later versions).

  4. Go to regedit.

  5. Go to HKEY_LOCAL_MACHINE/System/CurrentControlSet/Services

  6. Click on Winsock and Delete.

  7. Click on Winsock2 and Delete.

  8. Close registry.

  9. Restart your computer

  10. Access the properties of the LAN connection

  11. Click the install button in the Properties window

  12. Select PROTOCOL, and then click the Add button.

  13. Click the disk...

  14. Type C:\windows\inf\nettcpip.inf in the dialog box, and click OK.

  15. Choose from the list of INTERNET TCP/IP PROTOCOL in the list, and then click OK.

  16. Click CLOSE.

  17. Restart your computer. (At this point the Winsock is complete)
      not only avoid this problem from happening in the future, but also
      to make the process much easier you update Windows.)

  Try the following steps: http://support.microsoft.com/kb/837333

• Why the network does not work after update to ios10?

  I can't make and receive calls. In addition, I can't send and receive messages.

  Reset your network settings. Tap Settings > general > reset > reset network settings. This also resets the Wi - Fi networks and passwords, cell parameters and VPN and APN settings you used before.

  If this does not help, try here > If you can not connect to a cellular or cell - data Apple Support Network

• HP ENVY Beats Audio - Subwoofer m6-1231ea does not work

  Recently purchased HP ENVY with beats audio and triple bass subwoofer m6-1231ea

  But how to get the subwoofer to work? By pressing fn + b does nothing...

  Hello @Gurtais,

  I read your post about how you try to get the subwoofer on your laptop for work, and I'd be happy to help you in this case!

  Because the subwoofer is an automatic feature of your sound system, I recommend reinstalling the drivers software and hardware original that came with your system. This can be done by following the steps described in this document on the use of the Recovery Manager to restore the software and drivers (Windows 8). Once installed, please update the drivers by Using HP Support Assistant (Windows 8).

  If you are still not able to use the subwoofer after update the software, I recommend to return your system to a previous restore point to where the subwoofer was working. To do this, please follow this document on using Microsoft System Restore (Windows 8).

  Should the subwoofer still not work with the rest of the sound system, I suggest you perform a backup and restore of your operating system. This can be done by following this resource on the backup of files (Windows 8), and more to perform a recovery of the HP (Windows 8) system. This should help get your system back to factory settings.

  If the problem persists, please call our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number.

  http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  I hope this helps!

  Concerning

• Wi fi network does not work anymore, is no longer recognized

  Hi all

  The problem:

  I can't connect my router wirelessley.

  The wireless network icon went from my system tray. His was replaced by a monitor and an icon of cable (with a red cross until I plug the ethernet cable).

  Other info:

  The router works fine and can be accessed by my phone, Tablet, the ps3 without problem.

  Ive tried to turn on and turn off the connection to the network space 2 (adapter cisco systems vpn for windows 64-bit)

  Ive checked that the drivers are up to date.

  To unravel it any help would be greatly appreciated as I've almost tripped over the ethernet cable, trailing across the room about ten times so far.

  Thank you very much

  EET

  Hello

  Thanks for posting your question on the forum of the Microsoft community.

  I would like to know some information about the problem so that we can help you better.

  1. What is the brand and model of your computer?
  2. have you made any changes to your computer hardware or software?

  I would suggest trying the following methods and check if it helps.

  Method 1:
  Run the network troubleshooting and check.
  Reference:
  Using the troubleshooter from network in Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

  If this does not help, then use method 2.

  Method 2:
  Please use the suggestions provided in this Microsoft support article and check if it helps.
  Reference:
  Wireless and wired network problems
  http://Windows.Microsoft.com/en-in/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

  See also:
  Why can't connect me to a network?
  http://Windows.Microsoft.com/en-us/Windows/cant-connect-to-network#1TC=Windows-7

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• Get-file - name 'network' - does not work?

  Hello

  Is it just me, or this doesn't work as it should?   (Using vCenter 4.0 Update 1)

  Get-file-name 'network '.

  Returns:

  Get-file: 07/10/2010 22:57:03 Get-file with the name 'network' is not found, using the specified filters.

  They work very well:

  Get-file-name "vm".

  Get-file-name "of home.

  Get-file-name 'datastore '.

  Basically, I am trying to create a place of reference to use in a cmdlet New-folder to create a folder in the area of networking (and then eventually move networks to this new folder).

  Thank you!

  Eric K. Miller, Genesis Hosting Solutions, LLC

  http://www.genesishosting.com/ - lease of our ESX cluster frame!

  I'm afraid that the current to PowerCLI version does not support the network folder.

  As a temporary diversion, you could do something like that

  $NetFolder = Get-View (Get-Datacenter -Name "Genesis Data Center").Extensiondata.NetworkFolder
  $NetFolder.ChildEntity | where {$_.Type -eq "Folder"} | %{Get-View $_} | select name
  

  The example above shows just the name but you have access to all the properties in the managed folder object.

  ____________

  Blog: LucD notes

  Twitter: lucd22

• Tecra A9 - network does not work after wake up from the sleep/hibernation mode

  I have TECRA A9 and it works fine, but I found that when computer portable GB extended standby/sleep mode and after the return to work on the laptop to the network not working not.
  Keep it light, but there is no network and to solve it, I need to restart the laptop.

  Any help please.

  Kind regards.

  This is a known issue so take a look at this site:
  http://APS2.toshiba-tro.de/KB0/TSB8902FC0000R01.htm

  Updated the BIOS, and then it will work.

• Wireless network does not work on Satellite A305-S6898

  Hi all

  I just wanted to know why my wireless device doesn't work anymore. There for awhile he last internet connection detection.
  Would it be a malfunction of the pilot or something else?

  Thanks in advance for any assistance.

  Hello

  > . Would it be a malfunction of the pilot or something else?

  Yes, it can be. First of all, download driver Wlan:

  http://APS2.toshiba-tro.de/WLAN/?page=downloads

  If this does not resolve your problem, we will think what to do next...