Several links to counterparts in vPC between two Nexus 9 K

Similar Questions

• I got a prob while creating a link/link between two tables in a jdeveloper11g

  Hi guys...

  I got a prob while creating a link/link between two tables in a jdeveloper11g, help me.

  I use two table employee, Department.

  Unfortunately there is no primary key and foreign key in these tables.now i updated on those of table structure.

  I want to create a form like it should be a link between the Department data, i.e. data and employee while the Department is changed then only present corresponding employees in this block...

  Table structure as follows

  Employee:

  -------------------

  employe_id,

  name,

  Department,

  GR,

  Date of birth

  Department of justice

  Department:

  --------------------

  department_id,

  department_name;

  Note: in the employee department table is the same as in the department table department_id...

  So, you want to build master / detail between Department & sub_departments?

  In the same way, create a new, yet another link between departments & sub_departments, so that the connection is:

  Department.Department_Id = sub_departments.department_id

• How do a link led between two forms that independently of moving

  Hi all

  I am looking for many tutorials how to create something like this:

  http://turbulence.org/works/MyPocket/graph/

  (the video is on the right)

  But could not.

  I have for each shape, I do 2 circles (move separately) and between them, making a shape that works as a link, related on each circle on the sides... is it clear? I need the link to 'stretch' and follow the two circles...

  Do you know if there is a way?

  Thanks in advance

  m.

  Use something like this technique from an old blog post, I did years ago:

  I created a layer named string and a layer called Kite. I drew a mask on the layer of string that forms a gentle arc, added the effect of outline with a width of 3 pixels and paint on Transparent selected. The race goes from the left edge to the right edge of the layer in the chain, and it is important. The string layer is slightly narrower than the model to make it easy to work with. The last step with the layer of string is to move the anchor point to the left most vertice point of the mask at exactly a value X 0. It is also important. The two layers are converted to 3D.

  The Kite layer is simply a square solid with a mask in the shape of the kite and the anchor point where is used the string.

  The following terms are added to the string layer:
  String scale:

  point1 = position;
point2 = thisComp.layer("Kite").position;
L = length(point1, point2);
w = thisLayer.width;
r = L/w*100;

  [r, value[1], value [2]]

  String Orientation:

  t = thisComp.layer("Kite");
l = thisComp.layer("String");

  fromPoint = l.position
atPoint = t.position
lookAt(fromPoint, atPoint)

  If you look closely the language, you'll see that I'm calculating the distance between the anchor and then dividing the difference in the width of the layer and multiplying that number by 100 to arrive at a scale factor to make the string layer is always the same length as the distance between the end of the chain and the kite. The part of the Orientation of the expression simply indicates the string to the wing. There is a problem which must be overome. The string layer is perpendicular to the wing and this part is important, the rotation must be changed to-90 to get things to normal. This isn't another expression, it's just a value that you put in.

  The kite layer also needs an expression to point the wing at the end of the string. The expression of the orientation of the kite is basically the same as the string Orientation expression with definitions for the to and the reverse point. It looks like this:
  Kite Orientation:

  t = thisComp.layer("String");
l = thisComp.layer("String");

  fromPoint = t.toWorld(position);
atPoint = l.toWorld(thisComp.layer("String").anchorPoint);
lookAt(fromPoint, atPoint)

  Now the kite can be moved and the string will follow.

  Here's the project file

  Here is a movie.

• Form must pass back between two users several times for signature

  I have a project agreement form that has specific steps that must be signed by both parties in order. User for example, a section of 1 Complete signs and forwards it to B user for confirmation, then he needs to deliver to the user so they can sign once completed section 2 and B user for confirmation, and so on for many individual sessions in the same document.

  I don't know if there is a way I create this kind of back and comes from the string between two users with conditions on a signature field, or how it could be achieved.

  It's awesome... basically what I thought I couldn't do, and EchoSign initially said was not possible.

  He said later that it is possible and their explanation is essentially yours, but they suggested also adding multiple roles to a single user (the user would get 3, role5, role1, etc.) in the same kind of sequence.

• "Limited connection" when you configure the network between two computers XP.

  Original title: Configuration of the network connection

  Trying to establish a network connection between two home PCs., both running Windows XP Pro. Have been through the network on both PC Setup Wizard but, they still say limited, in fact no connection. I use an Ethernet cable between the two Crusader. If it is true what I'm doing wrong?

  Thanx Terry

  Old but good, networking tips from MVP Malke, MS:

  The best and simplest is to buy a wireless router. This way you get Internet connectivity both machines and the added benefit of security more between you and the Internet. Then you configure your network wireless safely, and then you configure file/printer sharing. Here is information on the implementation of a router and also in networking. It seems long, but don't be intimidated. Setting up a router and the LAN of sharing between two computers takes about 15 minutes.

  The router configuration

  Setting up a router is simple enough. Normally, you run the CD that came with the router and follow the instructions. If you're running Vista, maybe the CD that came with the router does not work; I do not know this. But you can set up the router without the CD. Note that if you have Internet cable for the connection you have just set up the router to DHCP (or there may even be a choice of cable to choose). If you have DSL Internet, you select TRP usually and enter the username and password you selected when you initially set the DSL connection. So:

  1. turn off the power to your cable modem.

  2. attach a cable (usually supplied with the router) course Ethernet cat5e Internet/WAN port of the router to the Ethernet port on the cable modem.

  3. connect the ethernet cable cat5e from the network card in your computer to one of the ports on the router. If you do not have an ethernet cable (because you were using USB), you will need to go to the store and buy a.

  4. turn on the cable modem. After that all the lights are on, turn on the router.

  To configure the router:

   

  Have a computer connected to the router with an ethernet cable. Examples given are for a Linksys router. See the manual of your router or the router mftr's Web site. for the parameters by default if you don't have a Linksys. Open a browser such as Internet Explorer or Firefox and in the address bar type:

  http://192.168.1.1 [Enter] (it is default IP address of the router, which varies from router to router then check your manual)

  This will bring you to the login screen of the router. The default username is blank and the Linksys default password is "admin" without the quotes. Enter this information. You are now in the configuration of the router utility. Your configuration utility may be slightly different from mine.

  Click the Administration link at the top of the page. Enter your new password. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE. Re-enter the password to confirm it, and then click Save settings at the bottom of the page. The router will reboot and show you the box of connection again. Do not fill in the user name and put it in your new password to enter the configuration utility.

  Now, click on the link wireless at the top of the page. Change the network name (SSID) wireless by default to something, you'll recognize. I suggest that my clients not use their surname as the SSID. For example, you might want to name your network wireless network "CastleAnthrax" or similar.

  Click on save settings and when you get the prompt that your changes were successful, click the wireless security link which is just beside the Basic Wireless Settings link (where you changed your SSID). If you have a newish computer, you will be able to affect security WPA2-Personal Mode. Do this and enter a password. The password is what you enter on all computers that are allowed to connect to the wireless network. MAKE A NOTE SOMEWHERE THAT YOU WILL NOT LOSE.

  At this point, your router is set up and if the computer that you use to configure the router will normally connect wireless, disconnect the Ethernet cable and wireless of the computer should see your new network. Enter the password you created to join the network and start surfing.

  *****

  B. file/printer sharing of

  Excellent, comprehensive, but easy to understand article on sharing files/printer under Vista. Contains information about sharing printers and files, and the folders:

  http://TechNet.Microsoft.com/en-us/library/bb727037.aspx

  For XP, start by running the Network Setup Wizard the on all machines (see warning in section A below).

  Problems sharing files between computers on a network are usually caused by 1) a misconfigured firewall or a firewall neglected (including a dynamic firewall in a virtual private network); or (2) inadvertently run two firewalls such as the firewall of Windows and a third-party firewall. and/or (3) do not have accounts to the same users and passwords on all computers in the workgroup. (4) tries to create actions where the operating system does not.

  A. configure the firewall on all machines to allow traffic to local area network (LAN) as being approved. With the Windows Firewall, it means which allows file sharing / print on the Exceptions tab normally run the XP Network Setup Wizard will take care of this for these machines. The only "witch hunt", it will turn on the XPSP2 Windows Firewall. If you are not running a third-party firewall or you have an antivirus with "Internet Worm Protection" (like Norton 2006/07) which acts as a firewall, you're fine.  With a third-party firewall, I usually set up the allocation of LAN with an IP address range. E.g. would be 192.168.1.0 - 192.168.1.254. Obviously you would substitute your correct subnet. Do not run more than one firewall. DON'T STOP FIREWALLS; CONFIGURE THEM CORRECTLY.

  (B) to facilitate the Organization, put all computers in the same workgroup. This is done from the System applet in Control Panel, the computer name tab.

  C. create the counterpart of the user accounts and passwords on all machines. You do not need to be logged into the same account on all machines and assigned to each user account passwords can be different; accounts/passwords just need to exist and to match on all machines. DO NOT NEGLECT TO CREATE PASSWORDS, EVEN IF ONLY OF SIMPLE. If you want a machine to boot directly to the desktop (a particular user account) for convenience, you can do this. The instructions on this link work for XP and Vista:

  Set up Windows to automatically connect (MVP Ramesh) - http://windowsxp.mvps.org/Autologon.htm

  D. Si one or more of the computers is XP Pro or Media Center, turn off Simple file sharing (Folder Options > view tab).

  E. create share as you wish. XP Home does not share the users directory or the Program Files, but you can share folders inside those directories. A better choice is to simply use the Shared Documents folder. See the first link above for more information on Vista sharing.

  F. you have the job of file sharing (and tested by exchanging a file between machines), if you want to share a printer connected locally to one of your computers, share of this machine. Then go to the printer mftr Web site. and download the latest drivers for the correct system. Install them on the target machines. The printer must be collected during the installation procedure. If this isn't the case, install the drivers and then use the Add Printer Wizard. In some cases, printers must be installed as local printers, but it is outside this response.

• Linking rising switch config - Communication between them

  I'll install UCS with two Catalyst switches (3560 and 3750G). Make a channel of port pair-bond between them? It is a requirement for communication in the workplace?

  To connect the port-channel coming from the FIs to each of two switches? Or I can cable two links to the same uplink switch?

  Plase answer quickly because I am short on time...

  Post edited by: Atle Dale

  Hi Atle,

  Yes we need a l2 of common platforms for VLAN set them on the UCS, as the two FI create two different fabrics (A & B) and all traffic on the blade on B A and vice versa should be settled by the switches upstream. If you do not have a common upper the 3560 and 3750 the then you need to have a link between the two switches. Make sure that enable the VLAN (set on ucs and others if necessary) on these ports but also to ensure that the protocols spanning-tree does not block the.

  I'm not very sure of your second question, but on what I understand:

  (1) If you have several links will even pass his favorite to put in a purchase order

  (2) given that these switches are different and not in a VSS, you need seprate in. for each switch.

  I hope this helps!

  . / Afonso

• Catalyst 3560 liaison network between two servers ubuntu 12.04

  Hello world

  I'm trying to transfer data with more than 1 Gbit/s between two servers, but I just get a card (approximately 1 Gbps) NETWORK performance. Here is my configuration:

  srvnettest1 and srvnettest2 are two 12.04 servers ubuntu with three network cards in each. management eth0, eth1 and eth2 are network cards that should work as a team. ;-) Here are the relevant parts of fit it:

  [email protected]/* */:~# less /etc/network/interfaces
  ...
  auto bond0
  iface bond0 inet static
  address 172.16.200.100
  netmask 255.255.255.0
  bond-mode 4
  bond-miimon 100
  bond-slaves none
  bond-lacp-rate 1
  bond-primary eth1 eth2
  auto eth1
  allow-bond0 eth1
  iface eth1 inet manual
  bond-master bond0
  auto eth2
  allow-bond0 eth2
  iface eth2 inet manual
  bond-master bond0
  ...
  
  

  
  [email protected]/* */:~# less /etc/network/interfaces
  ...
  auto bond0
  iface bond0 inet static
  address 172.16.200.200
  netmask 255.255.255.0
  bond-mode 4
  bond-miimon 100
  bond-slaves none
  bond-lacp-rate 1
  bond-primary eth1 eth2
  auto eth1
  allow-bond0 eth1
  iface eth1 inet manual
  bond-master bond0
  auto eth2
  allow-bond0 eth2
  iface eth2 inet manual
  bond-master bond0
  ...
  
  

  It's the switch configuration (btw, this is a version of IOS in course WS-C3560G-48TS 12.2 (55) SE)

  Switch#show running-config
  ...
  interface Port-channel10
  switchport access vlan 200
  switchport mode access
  !
  interface Port-channel20
  switchport access vlan 200
  switchport mode access
  !
  interface GigabitEthernet0/1
  switchport access vlan 200
  switchport mode access
  channel-group 10 mode active
  !
  interface GigabitEthernet0/2
  switchport access vlan 200
  switchport mode access
  channel-group 10 mode active
  !
  interface GigabitEthernet0/3
  switchport access vlan 200
  switchport mode access
  channel-group 20 mode active
  !
  interface GigabitEthernet0/4
  switchport access vlan 200
  switchport mode access
  channel-group 20 mode active
  ...
  

  This is my summary etherchannel:

  Switch#show etherchannel summary
  Flags:  D - down        P - bundled in port-channel
  I - stand-alone s - suspended
  H - Hot-standby (LACP only)
  R - Layer3      S - Layer2
  U - in use      f - failed to allocate aggregator
  M - not in use, minimum links not met
  u - unsuitable for bundling
  w - waiting to be aggregated
  d - default port
  Number of channel-groups in use: 2
  Number of aggregators:           2
  Group  Port-channel  Protocol    Ports
  ------+-------------+-----------+-----------------------------------------------
  10     Po10(SU)        LACP      Gi0/1(P)    Gi0/2(P)
  20     Po20(SU)        LACP      Gi0/3(P)    Gi0/4(P)
  

  My test tools are nuttcp (by transfer) and bmon (to watch what is happening during the transfer). Unfortunately, I am not able to transfer more than 1 Gbps:

  [email protected]/* */:~# nuttcp -i1 172.16.200.100
  97.1875 MB /   1.00 sec =  815.2409 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.4763 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7321 Mbps     0 retrans
  98.1250 MB /   1.00 sec =  823.1001 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.5306 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7560 Mbps     0 retrans
  98.1250 MB /   1.00 sec =  822.9890 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.6753 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.5528 Mbps     0 retrans
  98.0625 MB /   1.00 sec =  822.7058 Mbps     0 retrans
  982.5000 MB /  10.03 sec =  821.9606 Mbps 21 %TX 37 %RX 0 retrans 0.32 msRTT
  

  In bmon, I see that a NIC (eth1) of bond0 the uplink and the other a (eth2) made the downlink:

  #   Interface                RX Rate         RX #     TX Rate         TX #
  qqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqqq
  srvnettest2 (source: local)
  0   lo                         0.00B            0       0.00B            0
  1   eth2                     269.26KiB       4175       0.00B            0
  2   eth1                     123.00B            0     102.56MiB      71030
  3   eth0                     179.00B            2     491.00B            1
  4   bond0                    269.38KiB       4176     102.56MiB      71030
  

  I tried a lot of things, but now I have no idea what to do or what to try next. It is true that I have no deep understanding of Cisco etherchannels yet, so I guess that my mistake is somewhere in the IOS configuration.

  Thanks a lot for your support and welcome to Germany

  Stephan

  Hello Stephan,

  With EtherChannels, a single flow (the flow of images/packages with the same source and destination) is always carried by a single link only. Implementation of Cisco implements not balancing on connections in an EtherChannel load by package, and it avoids a reason: executives could get reorganized, something this plain Ethernet never should do. This means that you will not see an improvement in bandwidth on the speed of a single link to your EtherChannel for a single stream. It is only the overall bandwidth for several stream which increases. The advantage of EtherChannel becomes therefore obvious that if your server starts many conversations and several stream handling.

  Best regards

  Peter

• TimesTen - Communication between two DSN

  Hello
  
  Currently I have a setup in Oracle DB in which there are two databases and objects are accessible in all of these databases via the link/synonyms database.
  
  Now, I need to replicate that in a Cache Timesten InMemory DB underlying of Oracle databases configuration that would involve the creation of a link between two DSN names stored on two different servers.
  
  Can you guide me on how to go about it.
  
  Thank you
  Karan

  Unfortunately there are several constraints here that aren't going to help you:

  1. when using the TimesTen "cache" feature a single TimesTen database can only cache data to a backend Oracle single instance. Only regular tables can be cached (not views, dblinks etc.). So, if you have two instances of Oracle Db and you need data in cache at the same time you will need two TimesTen databases.

  2. as mentioned, TimesTen does not support dblinks, remote queries or queries/transactions distributed between various databases TimesTen (well, what he does in some circumstances, but anything that will help you I think).

  3 TimesTen can replicate data between different databases TimesTen, but in general you can not use the level replication table with cache tables.

  So I think, to adopt TimesTen in your application as an important architectural work may be necessary. Only you can be the judge of that, of course, but considering this please keep in mind the constraints above.

  Kind regards

  Chris

• Is it possible to route signals of relaxation between two chassis PXI-1002 with the PXI-8335?

  Hello

  as the subject says, I am interested in the delivery of a signal to trigger between two chassis PXI-1002. At present, these two chassis are connected by a MXI - 3 system using maps PXI-8335. The software is Labview 2010 sp1 and 380 NIScope drivers.

  We want to keep (a PXI-5122 by chassis) scanners supply separated due to the requirements of our measure! The chassis are connected via cable to fiber optic. This explains why I can not just use the shutter release in Star, or connect via 'Trigger' or 'clk' cards (the inputs / outputs to the front of the cards).

  I found a few examples, but they seem to all be designed for use with a chassis only, I'll call later to the examples that inspired me to this point. Each guide explaining the synchronization of several chassis systems seems to use another material or VI is not accesible to me. This makes me wonder if my hardware has the capacibilities I need.

  The first picture shows approximately where I started from (sorry I can't post VI, confidential...):

  Only the middle part is interesting. Two sessions are initialized and manipulated parallel, trigger too. This has led to delays in the signals and should now be fixed. This apart from the VI works fine.

  Goal is to trigger only on one channel but both devices! If possible, the device will trigger must be chooseable.

  I started to rebuild the VI using the "EX Synchronization.vi 5xxx niScope' seeming spontaneity. The result is shown in the following image:

  

  I tried different RTSI lines, but had no positive results. only the main channel has triggered.

  After this first approach, I looked in the "niScope EX .vi multi-Device configured Acquisition (TClk)" and other examples of TClk which seem to work for similar problems. The VI of reconstruction can be seen in the following images:

  

  (Sorry, I had to use two photos..)

  In this case, I didn't have no choice for trigger lines, it would automatically set the VI TClk. I tried to trigger on both devices, though. This second approach seemed promising to me, but it was an error:

  "niTClk Synchronize.vi:1".

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  Status code:-89125niTClk Synchronize.vi:1

  Index (starting at zero) of the session: 1

  The error reported by the pilot of the instrument:

  No registered trigger could be found between the
  devices on the route.

  If you have a PXI chassis, the chassis correctly identify in
  MAX and make sure that it has been configured correctly. If you use PCI
  devices, make sure they are connected with a RTSI cable and that the cable RTSI
  is saved to the MAX. Otherwise, make sure that there is an available trigger line
  the trigger bus shared between devices.

  Source device: PXI1Slot4

  Target unit: PXI2Slot4

  "Status code:-89125"

  This error came back even after I've identified this drug as possible to the MAX, as shown in the screenshot:

  

  In some of the textbooks, they showed how to get the MAX trigger lines, but as you can see, there is only booking options in my MAX. Whatever I do, I can't find options to define how to get my trigger signals...

  In principle, it is possible to trigger instruments in different chassis, which is indicated in this Guide and others... the question that remains is can it be done with my set of components?

  I understand that the use of multichassis compromised the integrity of the lines very adjusted as trigger in Star etc., so the configuration should be taken into account in some way, that my approach does not, I knew... But there must be a way to do this? And to start: to get just any signal from one device to the other trigger!

  For any advice on this issue, I would be very thanfull!

  Concerning

  Max1744

  Hi Max,.

  Thanks for the detailed post and explanations of your application and requirements. You're right using TClk, because this is the optimal method to synchronize the 5122 digitizers. The original VI you worked with is unique for some of the legacy scanners and does not directly work with scanners based on the most recent CMS (for example the 5122). The good news is that you can synchronize these cards to separate chassis, but it will use the calendar 66xx and synchronization (T & S) cards in the chassis of the master and the slave, as indicated in the guide that you have accessed. These are needed because a common reference clock must be shared between them as well as a couple of tripping. MXI itself can not handle export triggers and clocks, so there is no way to do this without physically wiring between the chassis with cards T & S. Unfortunately, regardless of what specific method, you use for synchronization, it will take a material extra beyond what you currently have.

  As one of your needs looks like it is necessary to retain wiring between the chassis directly, you may need to consider to synchronize using 1588 or GPS protocols. 1588 Protocol is a system for synchronization on the network while GPS course use antennas and locks for a common wireless signal. Although these synchronization methods may allow you to keep your chassis isolated, they will also require some manual configuration because you would be able to use the TClk synchronization and so the level of synchronization you can get between the cards may not be as good that can physically wire signals between the chassis using T & S cards.

  Hope this helps,

• Measure the time between two digital pulse

  Hello

  For a non-critical calendar application, I need to measure the time interval between consecutive TTL pulses, ranging from the order of 0.5 s for a few seconds, with a low accuracy of +/-10-50ms. The interval being measured varies between the rising edge of the first pulse and the front of the next and so on.

  I have several input lines I need to deal with. Because it's a critical machination low cost, I don't want to use digital counters for each line, so I work with an acquisition of data USB6008 and have connected the input rows TTL on the digital inputs of the device. Avoiding will be sufficient.

  I found a good example of VI on discussion forums that does almost the same thing, only it uses instead of the DAQ Assistant user input. The VI works including the time the program going on in a while loop. I replaced with the DAQ Assistant output (a channel) user input in the hope that it is still work.

  

  When I run the program in "run once" mode, it seems to work perfectly. However, in "continuous run" it measures only a very small interval, probably just the time between two samples.  I think it has something to do with the help of a while loop in combination with the DAQ Assistant. Anyone who has any suggestions how to solve this problem?

  Thank you!

  OK... first of all, you should never use the button "run continuously.  I wish that NEITHER would be to eliminate it, but told me that it is sometimes useful for debugging.  If you want your program to run over and over again, use a while loop with a stop"" button.

  If I'm reading your code correctly, you make your initial moment, and then collect data from data acquisition.  When one of the channels is "T", you stop your loop and the end time of capture.  (By the way, why you convert your table to a cluster?  Why not just index the appropriate channel in the table directly?)

  Since you want to capture the time between two consecutive pulses, you need to know when a transition has occurred... i. e when your digital line went from F (no pulse) to T (pulse start).  This will give you your forehead.  Right now, all you're doing is looking for a value T - so you have no way of knowing if you are looking for to the previous impulse again, or a new impetus.  You also burn 100% of your processor with the way you have your programme in place.

  You need a small loop delay so that your VI is not 100% of your hogs CPU time.  Given that you can live with an accuracy of 50msec, what I suggest that you use.

  See attached picture for you give an idea of how to implement.  He will probably need some refining operations, but it should point you in the right direction.

  

  I hope this helps.

• The way of writing to a wireless bridge between two different routers.1:broadband and dir 2:dlink 605 l

  I want to bridge.and wireless I can't do that... Please send me how to write to a wireless bridge between two different routers.

  1:broadband
  and
  2:Dlink dir 605 l,

  Hi Mohammed Ehsan Jourah,.

  Thanks for posting the request in the Microsoft community forums.
  I understand that you need to know how to make a wireless bridge between two different routers

  What version of the operating system is installed on the computer?

  To connect multiple computers, install a network adapter in each and run a network CAT5 cabling to connect each one to a hub (and thus the other.) The computer that will serve as a transition will have a standard network card for wired and a wireless network adapter that will connect to the wireless (WAP) access point or gateway on the second network.

  A network bridge is software or hardware that connects two networks or more so that they can communicate. You can create only a single bridge network on a computer, but a bridge can handle any number of network connections.

  You can try the steps at the bridge between two different routers wireless.
  a. determine the coverage area. When using two or more routers, the coverage area should be divided, and each router should be placed in a central location in each subdivision. If you add a wireless router to an existing network, this may mean moving the first router.
  b. decide which router is the main router. The main router is connected to the Internet, a LAN cable or other networks. It should be as close to the wired network connections or who has the best line of sight to another wireless network. In addition, the main router should be a high range router, allowing large tables of State and more users.
  c. buy a spare antenna, as the antennas that come with most routers do not have very good range. Quality omnidirectional antennas can push the range and signal strength of each of the routers, which, in turn, will reduce the cost by allowing routers less cover more space overall.
  d. deploy the primary router carefully. This router is the most important and requires most of the time of installation and options. Set the WEP (Protocol) encryption Service Set Identifier (SSID) and wireless, set up the Internet connection and test the router with some clients (computers). Once you get the main router deployed, deploy other routers should be easy.
  e. deploy the secondary routers, which must be configured to operate in "mode of transition." Secondary routers should be deployed around the perimeter of a large area or 'hot spots' where users placed - for example, will convene a bench Park or the table.

  Links:
  Create a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/create-a-network-bridge

  Add a connection to a network bridge:
  http://Windows.Microsoft.com/en-us/Windows7/add-a-connection-to-a-network-bridge

  Hope this information helps you. If you need to get help or information with decision-making wireless bridge between two different routers, I'll be happy to help you.

• The DDE network between two PCs running windows server 2003

  We seek to transfer data between two excellent sheets (Office 2003). Two excellent books are on different PCs running windows server 2003 and office 2003. The two PC's belonging to the same workgroup. One of them being run by Siemens PCs 7 process control system. I have ensurred running on both PC Netdde.exe. When excellent both books are on the same server they connect perfectly. When I run the client excel book on the other Pc (without changing something in the formulas of cells) the connection is lost. The DDE connection is approved on the PC server and this connection permission is full control for everyone. What is perhaps the reason for this problem? I think I missed a point. Can I get help for this. Thanks in advance for you.

  Hello

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the appropriate Forum TechNet. You can follow the link to your question:
  http://social.technet.Microsoft.com/forums/en-us/categories/

• active task bar has an empty space between two icons

  Why my Active taskbar has an empty space where the icon should be, but there is none.

  It shows the applications running, but between two of them, there is a space for one, but he's not here.

  As if it were invisible... nothing to do with the button "see the hidden icons.

  This is the way it shows:

  from right to left: clock, volume, network connection icon icon, icon options power, BLANK, anti virus, the webcam icon and so on

  Hello

  ·         Are you referring to the system tray?

  ·         Did you the latest changes on the computer before the show?

  Method 1:

  I suggest you to refer to this article and check if it helps.

  Remove icons from the notification area (system tray)

  http://Windows.Microsoft.com/en-us/Windows-Vista/remove-icons-from-the-notification-area-system-tray

  Method 2:

  If the problem persists I suggest you perform the clean boot on the computer and check if it helps.

   

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135/en-us

  Note: Don't forget to start the computer in normal mode by following step 7 from the link.

• Vs LACP LAG between two PowerConnect 5448 s

  Hi all.

  Just got a switch configuration quad for our infrastructure EqualLogic SAN using PowerConnect 5448 s.  One thing I never did before her configuration of aggregation of links.

  If I wanted to set up an aggregate of 4-port connection between two switches, say on ports 1 to 4, and our iSCSI VLANS is 1000, the below will work?

  serial interface ethernet g(1-4)

  channel-group mode 1 on

  interface port-channel 1

  switchport general

  switchport General pvid 1000

  I've seen documentation on how to get the ports-working channels between a 5000 or 6000 switch and a Cisco Catalyst switch, but not just any what docs on how to connect two switches PowerConnect.  The doc of interoperability for Cisco <->Dell seems to want to use LACP on the side of Dell.  I wonder, should I configure and link LACP on the two 5448 aggregate s I have are running?

  Thanks for in advance for any advice or assistance!

  Joe

  
  

• What is the fastest way to transfer files between two Windows 7?

  I have two machines windows 7. I use LAN to copy files. It is only 140 Kbps. Then I use TeraCopy to the task. The speed is now 410 kbit/s. It is still too slow to copy a 80 GB of files via the LAN.

  You have any good ideas?

  I Googled that there are a lot of said articles file copy Windows 7 via the LAN is slow as it is the case, is it?

  I tried to use Windows Easy Transfer. Well, I do not see the speed, and I don't know how long it will take for the transfer file either.

  I want to see a better plan and advice.

  Hello

  Transfer of files from one computer to another depends on many factors such as the speed of the computer and the method you choose to transfer the file.

  Visit the link to learn more about the methods for file transfer between two computers:

  http://Windows.Microsoft.com/en-us/Windows7/transferring-files-and-settings-frequently-asked-questions

  Reference: http://social.technet.microsoft.com/Forums/en/w7itpronetworking/thread/c30f6649-a0d9-4f5e-8671-904a8f5469bb