several loops with error handling and controll
I have a project where I spin 4 loops at the same time and must stop all the loops with a stop button as well as all the loops if one of the loops will receive an error.
Loop 1.
Loop start
control the other 3 loops
Loop 2.
Analog voltage reading
Loop 3.
Digital inputs to read
Loop 4.
Write digital output
Someone knows how to do this?
Two other methods not mentioned in the otherwise excellent document that mentioned Matt are the use of a global variable 'stop all' and a relative using a Global Variable of VIG/functional. The reason to talk about, is that they can be used also stop 'detached' live, live which are defined to run asynchronously (and therefore a bit 'out of control') regarding the main VI.
I use a "combination of ingredients" for some projects I'm developing using LabVIEW 2016 and its support of the channels. For example, I use a Messenger channel to create something akin to a message in queue manager. When the event loop detects that the exit button has been pushed back, it puts a Message "Exit" on the channel of Messenger and stops himself. When the Message Loop sees "Exit", it sends one release Message who else has need to see (in one case, the producer of a producer/consumer model) and stops himself. When the producer Gets the output Message, it puts a "last element is invalid" on the flow of the channel for consumers and stops himself. When the consumer gets the message of the last element, he stops himself. A magnificent waterfall.
And I work (not yet 100% complete) how to extend this to start the asynchronous calls that do not (yet) support channels as easily...
Bob Schor
Tags: NI Software
Similar Questions
-
Error handling and the basic flow data
Hello
I'm learning the basic error data and flow management. The seal is a simple VI to implement this.
How do I implement this code to display an error.
Thank you.
You must assign a value of your choice for the cluster of error - in errors generated by the LabVIEW functions, error is already assigned/etc, but to find user customized errors, the user must assign values. Just make sure you do not use the same error values that LabVIEW uses for predefined errors. If you do a search for error codes, you will be able to find this error varies from code - so pick something that is not already used.
And Yes - using an error handler would be a simple way to accomplish what you're trying to do. This error handler will appear a message error only if your feature will remain smooth.
-DP
BatchTest Corp.
NEITHER Alliance Partner
-
cursor for loops with exception handling
Hi all
I use oracle11g I need to write a stored procedure to about 10 select statements with the managements of exceptions for each select statement. I am unable to handle the exception handling.please guys help
Here is the code sample I wrote
CREATE OR REPLACE PROCEDURE TEST_PROC
(P_ID IN VARCHAR2,
P_MOB IN VARCHAR2,
P_OUT_MSG OUT VARCHAR2)
AS
CURSOR CUR_RES AS SELECT NAME, INFO, VER_DETAILS FROM TABLE_NAME WHERE ID = P_ID AND MOBILE_NO IS P_MOB;.
BEGIN
FOR REC IN CUR_RES LOOP
P_OUT_MSG: = 'BKY000. '
END LOOP;
EXCEPTION
WHEN NO_DATA_FOUND THEN
P_OUT_MSG: = 'BKY001. '
END;
OUTPUT DESIREE WHILE RUNNING IN A JAVA APPLICATION IS REQUIRED
IF THE DATA FOUND BKY000 | RESULT OF THE SELECT STATEMENT
IF DATA NOT FOUND BKY001
PLEASE HELP WITH SAMPLE... PLEASE FRIENDS
It's more clear now
create or replace procedure test_proc (p_id in varchar2, )
p_mob in varchar2,
p_out_msg out varchar2,.
p_result on sys_refcursor
) as
v_err_msg varchar2 (300);
row_count number;
no_data_returned exception;
nonunique_column exception;
Start
Open Select p_result *.
WCP
where deptno = to_number (p_id)
and job = p_mob;
Select count (*)
in row_count
WCP
where deptno = to_number (p_id)
and job = p_mob;
If row_count = 0 then
raise no_data_returned;
end if;
Select keep max (count (*)) (dense_rank first order by Count)
in row_count
from (select *)
WCP
Union all - simulating a duplicate line
Select 7839, "ETBIN', 'PRESIDENT', null, trunc (sysdate), 3000, null, 10
of the double
)
where deptno = to_number (p_id)
and job = p_mob
Group by empno
view count (*) > 1;
If row_count > 1 then
raise nonunique_column;
end if;
p_out_msg: = 'BYK0000 ';
exception
When no_data_returned
then p_out_msg: = "BYK001";
When nonunique_column
then p_out_msg: = "BYK002";
while others
then v_err_msg: = ' procedure TEST_PROC: error: ' | SQLCODE. ': ' || substr (SQLERRM, 1, 200);
raise_application_error(-20000,v_err_msg);
end;
declare
R_C sys_refcursor;
E_r emp % rowtype;
E_m VARCHAR2 (255);
DEPTNO number: = 10;
VARCHAR2 (30) employment: = "PRESIDENT";
Start
dbms_output.put_line (' input parameters: deptno = ' | to_char (deptno) |) '; job = ' | Job);
test_proc (to_char (DEPTNO), Job, E_m, R_C);
dbms_output.put_line (' result: ' | e_m);
If e_m = "BYK0000" then
loop
extract r_c in e_r;
When the exit r_c % notfound;
dbms_output.put_line (to_char (E_r.empno) |' |) '|| RPAD(E_r.Ename,10) |' | '|| RPAD(E_r.job,10) |' | '|| TO_CHAR (E_r.SAL, 'fm99990'));
end loop;
end if;
exception
While other then dbms_output.put_line ('exception: ' | sqlcode |) ': ' || substr (SQLERRM, 1, 200));
end;
input parameters: deptno = 10; job = PRESIDENT
result: BYK002
Statement processed.
Concerning
Etbin
-
Problems with error 1053 and start my printer spooler
Hi, I also got an error 1053 come when I am trying to install my new Canon MP250 printer to my laptop with Windows 7 installed.
Can anyone help?
Hello
A 1053 would occur if the service does not correctly record his status as started with the service control manager.
Difficulty for the spooler service dependency information from and then restart the print spooler service and check if it helps.
Step 1: difficulty for the spooler service dependency information
Click Start, run and type the following text:
CMD /K SC CONFIG SPOOLER DEPEND = RPCSS
Alternatively, to achieve this by using the Registry Editor:
1. click on start, run and type Regedit.exe
2. navigate to the following branch
HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler
3. in the right pane, double-click the DependOnService value
4. remove the existing data and then type RPCSS
5. close Regedit.exeImportant This method contains steps that tell you how to modify the registry. However, serious problems can occur if you change the registry
incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then, you can
restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to display
the article in the Microsoft Knowledge Base:Back up the registry
http://Windows.Microsoft.com/en-us/Windows7/back-up-the-registryStep 2: restart the spooler service print;
Follow the instructions below to start the Printer Spooler service.
1. click on start.
2. type services.msc in the search to start.
3. right click on the Printer Spooler service and click Start.
4. on the general tab, next to startup type, make sure that automatic is selected.Open the printer Troubleshooter
http://Windows.Microsoft.com/en-us/Windows7/open-the-printer-Troubleshooter
You can also check this thread for more suggestions:
Kind regards
Amal-Microsoft Support.
Visit our Microsoft answers feedback Forum and let us know what you think. -
Choose several folders with choosing menu and empty their contents
Hi all
new to applescript and want to create a file menu choose where I can choose several folders and empty their content. There will be a dialog box at the end let me know that the files have been purged. The script I'm working for an individual file:
say application 'Finder '.
Close each window of
Open (choose folder with prompt "including one or more folders should purge?" multiple selections allowed location 'True' by default ' / users/bryceratops / ')
Set an to front Finder window
move each agenda a in the trash
Close front The Finder window
end say
say application 'Finder '.
display the dialog box buttons "purged records." {"ok"}
end say
But Im having this script to open, purge and close every finder window, if I selected several files in the menu choose a wire installation difficult.
Any ideas?
See you soon
Hello
Put the output of the command 'choose folder' in a variable (no need to open these folders).
----
the tFolders value (choose a folder with default location "including one or more folders should purge?" guest "/ users/bryceratops / ' with multiple selections allowed)
Tell application "Finder".
Repeat with thisDir in tFolders
remove items from thisDir - trash
end repeat
tell the end
activate
display the dialog buttons "purged records." {"ok"}
---
-
For two weeks now my HP Photosmart Plus B210a was wrong to behave. Until that time, I was a happy user, but since it says there is an error in the printer and that I should turn it works again.
Putting out voltage is actually not possible using the button, as this will trigger a reboot, ending up on the same screen as before. During the start cycle, I have a brief moment where I can access the regular menu before it shows a blue screen with the B8145558 error code. 2 seconds after it is shown, a white screen appears with the title of printer error and the message to reboot.
So far, I have cleaned the print head and the connections of all dirt and residues. I even managed to start and finish in a copy process, before it gives me the error. However, the error will come, and then it's over.
Someone has encountered this problem before? Currently, I find only 1 reference to this error in Google and not on this site. Any suggestions that I could try?
Hi @kootstra,
From your description, I suspect there is a problem with the firmware that may be irreparable. We can try a reset, but because the printer will not stay on very long main screen until the error appears that we are not able to access the menu of support, we need to reset.
I'll send you a PM (private Message), but before I do, please see the HP Privacy Statement.
This privacy statement informs you of our privacy practices and the choices you can make about the way information about you and your online activity is collected and how that information is used. This statement is available on our homepage at the bottom of each web page of HP and HP.com.
There are a growing number of messages in this forum and elsewhere in the internet with the steps to do a reset on different printers. Reset to will sometimes fix problems, so resetting is not the issue.
A few resets require you to enter key combinations to open special menus on your printer that you were supposed to never access. These special menus are used by developers and staff support for debugging of problems, but they are not intended for inexperienced users and can have unexpected results. A wrong button push and you might no longer have a printer, but rather an expensive paper weight. On top of that, if you happen to the 'brick' the printer in this way, it is considered as customer induced damage and voids the warranty automatically. These resets are only intended to be distributed and used as a last resort and under the direct instruction of a representative of the HP technical support. They should not be made lightly!
Reset the printer: what you need to know
Please check the little envelope on the upper right of the forums page to check your Inbox of Forums.
-
I can't install KB976325 update.
The system is Vista Ultimate (64-bit) Service Pack 2.
Error returned is
"WindowsUpdate_8007371C" "WindowsUpdate_dt000"
I did the following:
* Reset Windows Update via KB 971058
* Check the files with the file system Checker: no problem found
* Downloaded KB 976325 as a stand-alone file, the update failed (no error given)
* Ran Windows Live OneCare Safety Scanner: no problems found.
* Ran Windows Defender quick scan: no ound problems
* Clean the registry and temporary files with Windows DefenderThere must be a solution to this problem!
In desperation, I tried the Windows 7 upgrade. The upgrade failed at the last step. Vista was reinstalled and it works OK. However, I can't yet do the KB 976325 update! Oh, the Windows Defender definitions file has been updated through Windows Update fine.
Walter,
FYI-you are in the right forum. All Windows Update components are in the same enclosure. It is important to publish the specifications of your system, as you did.OK, lets start with a few basics. This KB976325 update is an update of security for Internet Explorer 7.
-First question is therefore always you use IE7 or have you moved to IE8?
-If you are looking for your update history is this show as installed KB? It is possible that it is already installed and that it is presented again for some reason any.Take a look at this article. It does not appear that you have tried these steps yet. Mike - Engineer Support Microsoft Answers
Visit our Microsoft answers feedback Forum and let us know what you think. -
Laptop Vista hangs very often with error 4375 and 4385 error error 80073712.
My laptop has always hang all the time. Error 4375, 4385 error & error 80073712.
Using the information system, this error window report said ' Application Hang"- iexplore.exe program ceased to interact with windows and was closed"I use Vista X 86 - BASED 32-bit PCPlease help me. Thank youThis Microsoft Knowledge Base Article seems to suggest a possible explanation:
For example, this problem may occur in the following scenario:
- Configure you a Windows Vista-based computer for use with a docking station.
- The docking station has a printer that requires the use of the parallel port (Parport) service.
- You disconnect the computer from the docking station, and then you restart the computer.
http://support.Microsoft.com/kb/935497
I'm not sure it is hanging on the line. Are there other errors?
-
Several BSOD with error different ntoskrnl.exe + 75c00 involving most of the messages
I am running Windows 7 64 bit on a homemade pc with the Asus motherboard, 8 GB of ram and a quad-core processor amd; If you need more specific information please ask. Most of the Bluescreens have different error messages, but all except one have been
Ntoskrnl.exe "caused by the driver" and "caused by the address. Most occurred when playing computer games. in the middle of the test I have updated my graphics card drivers and a few various other and I checked the ram to find errors although I should probably give him a half-dozen more going on.I will try to download a few zippers of depressed on skydrive. bear with me, I never did this before. NOPE, I can't. I can't even * find * skydrive. Someone please care to direct me to how it works yet? * edit *-it won't let me zip minidumps anyway. I give up. I'm about to perform technical support on this thing with his sledgehammer.
I tried to analyze the accident using windbg, but it fails to load the symbols for ntoskrnl. Here are some summaries of crash as recovered by the blue screen:
062713-13478 - 01.dmp 27/06/2013-21:31
KMODE_EXCEPTION_NOT_HANDLED
0x0000001E
FFFFFFFF "c0000005
fffff800'02e86d9c
00000000 00000000'
FFFFFFFF'ffffffff
Ntoskrnl.exe ntoskrnl.exe + 75c00 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062713-13478-01.dmp 4 15 7601 276 080 6/27/2013 21:31:51
062913-14024 - 01.dmp 29/06/2013-07:34:23
KMODE_EXCEPTION_NOT_HANDLED
0x0000001E
FFFFFFFF "c0000005
fffff800'03159 cd 0
00000000 00000000'
FFFFFFFF'ffffffff
CLASSPNP. CLASSPNP SYS. SYS + 1901 x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-14024-01.dmp 4 15 7601 276 080 29/6/2013 07:35:21
062913-13384 - 01.dmp 29/06/2013 18:54:47
IRQL_NOT_LESS_OR_EQUAL
0x0000000A ffffba80'09f27a60
00000000'00000002
00000000 00000000'
fffff800'02f31c5f
Ntoskrnl.exe ntoskrnl.exe + 75c00
NT kernel & system Microsoft® Windows® operating system Microsoft Corporation
6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-13384-01.dmp 4 15 7601 276 080 29/6/2013 18:55:47
062913-13962 - 01.dmp 29/06/2013-01:30:16
PM MEMORY_MANAGEMENT
0x0000001A
00000000'00041284
fffff680'0012 d 001
00000000'00000250
fffff700'01080000
Ntoskrnl.exe ntoskrnl.exe + 75c00 NT Kernel & System Microsoft® Windows® operating system Microsoft Corporation 6.1.7601.18113 (win7sp1_gdr.130318 - 1533) x 64 ntoskrnl.exe + 75c00 C:\Windows\Minidump\062913-13962-01.dmp 4 15 7601 276 080 29/6/2013 13:31:17
No specific information but if you look at the history of BIOS updated between your BIOS Setup and the last BIOS available you would appreciate that a number of improvements have been made.
You cannot count any error report when you have detected a faulty RAM. RAM corrupt system files, making it unreliable reports. When you installed the replacement RAM you run the System File Checker.
http://support.Microsoft.com/kb/929833I won't say there is no risk of update the BIOS, but if the instructions are followed carefully you shouldn't encounter any problem. The caveat is that you should not threatened the data files which can easily be saved on an external. You can't replace family photos and others.
-
Cannot install the windows updates with error 80240016 and 646 code
I tried to download updates manually and automatically. There are 14 of them, but nothing helped. I have a windows vista OS and I tried to find the error codes in line staring at me but still not joy. can help you. all updates, I think that refer to microsoft office and the student that is installed on my computor.
Hi Tina500,
Thank you for using the Microsoft Windows Vista Forums.
You probably found this error message because
Windows Installer is outdated.
Here is a link to an article that addresses this issue
http://support.Microsoft.com/kb/957308
If please reply and let us know if your problem is resolved or if you need further assistance
David O
Microsoft Answers Support Engineer
Visit our and tell us what you think. -
Problems to return several rows with setting SLIDER and SO, to OTHER DBMS_OUPUT
Hi people
I use 11g Express Edition 11.2.0.2.0.
I'm trying to return the name of a student, all of their exams, grade, grading and if it is a pass or fail.
In the code I 'fiddled', if the student has failed it works. However, if the student has spent just returns 'result = Pass' and cannot return their name, rank and tests, pass mark.
Second question (and please let me know if I need this post in a separate thread) is if a student has completed multiple tests, it returns only one.
Thanks for any advice you can give me.
SET SERVEROUTPUT ON DECLARE CURSOR c_pass_fail_cursor (p_studentid number) IS SELECT students.firstname, test_history.score, test_id.test_name, test_id.passing_grade FROM students INNER JOIN test_history ON students.STUDENT_ID = test_history.student_id INNER JOIN test_id ON test_id.test_id = test_history.test_id WHERE students.student_id = p_studentid AND test_history.SCORE < test_id.passing_grade; v_name students.firstname%type; v_score test_history.SCORE%type; v_test test_id.test_name%type; v_passing test_id.passing_grade%type; v_result varchar2(4); BEGIN OPEN c_pass_fail_cursor (1); LOOP FETCH c_pass_fail_cursor INTO v_name, v_score, v_test, v_passing; EXIT WHEN c_pass_fail_cursor%notfound; END LOOP; CLOSE c_pass_fail_cursor; IF v_score < v_passing then v_result := 'Fail'; DBMS_OUTPUT.PUT_LINE (v_name || ' ' || v_score || ' ' || v_test || ' ' || v_passing || ' ' || 'Result = ' || v_result); ELSE v_result := 'Pass'; DBMS_OUTPUT.PUT_LINE (v_name || ' ' || v_score || ' ' || v_test || ' ' || v_passing || ' ' || 'Result = ' || v_result); END IF; END; /
Hello d670...
I would try this code:
DECLARE
p_studentid NUMBER;
v_result VARCHAR2 (20);
BEGIN
p_studentid: = 1;
FOR rec_result IN (SELECT students.firstname
test_history.score
test_id.test_name
test_id.passing_grade
Students
JOIN test_history
ON students. STUDENT_ID = test_history.student_id
JOIN test_id
ON test_id.test_id = test_history.test_id
WHERE students.student_id = p_studentid
AND test_history. NOTE < test_id.passing_grade ="" --=""> this line needs to be removed!
)
LOOP
IF rec_result.score<>
THEN v_result: = "Fail";
ANOTHER v_result: = "Pass";
END IF;
DBMS_OUTPUT. Put_line (rec_result.firstname |) ' ' || To_char (rec_result.score) | ' ' || rec_result.test_name | ' ' || To_char (rec_result.passing_grade) | ' ' || "Result =" | v_result);
END LOOP;
END;
/
I hope it helps.
Best regards, David
-
I am putting together a file and initially had this as:
Stop();
var myLoader:Loader;
function loadScene (): void {}
If {(telephone)
myLoader.unloadAndStop ();
removeChild (myLoader);
}
myLoader = new Loader();
var url: URLRequest = new URLRequest ("scene.swf");
myLoader.load (url);
addChild (myLoader);
(optional)
myLoader.x = 30;
myLoader.y = 30;
}
loadScene();
var singleLoader:Loader = new Loader();
backButton.addEventListener (MouseEvent.CLICK, backButtonClick);
function backButtonClick(ev:MouseEvent):void
{
var request: URLRequest = new URLRequest ("scene.swf");
myLoader.unloadAndStop (true);
myLoader.load (request);
addChild (myLoader);
}
Works very well. Then I added this to her for a Play/Pause button on the music I'm inserting:
import flash.events.Event
import flash.events.MouseEvent;
var isPlaying:Boolean = new Boolean();
var pausePosition:Number = new Number();
Create an instance of the Sound class
var soundClip:Sound = new Sound();
Create a new SoundChannel object
var sndChannel:SoundChannel = new SoundChannel();
Load sound using URLRequest
soundClip.load (new URLRequest ("Midnight_Clear.mp3"));
Create an event listener that wll updated as soon as the loading is finished his
soundClip.addEventListener (Event.COMPLETE, onComplete, false, 0, true);
controller.addEventListener (MouseEvent.MOUSE_DOWN, btnPressController, false, 0, true);
function onComplete(evt:Event):void {}
Read his load
sndChannel = soundClip.play ();
isPlaying = true;
}
function btnPressController(evt:MouseEvent):void
{
Switch (isPlaying)
{
real deal:
controller.gotoAndStop (2);
pausePosition = sndChannel.position;
sndChannel.stop ();
isPlaying = false;
break;
false case:
controller.gotoAndStop (1);
sndChannel = soundClip.play (pausePosition);
isPlaying = true;
break;
}
}
It's my mistake:
Scene 1, layer ' layer 4 ', 1 environment, line 41 1152: there is a conflict with definition inherited from namespace public flash.display:MovieClip.isPlaying.»
Line 41 is in italics above (var isPlaying:Boolean = new Boolean();).
Any ideas?
Change the Boolean variable name
isPlaying is a class action script
-
[Android] Several problems with Acc.meter and camera
Hello
I did some tests on my Galaxy S on its sensors. Here is the code:
import flash.sensors.Accelerometer;
import flash.events.AccelerometerEvent;var acc:Accelerometer = new Accelerometer();
acc.addEventListener (AccelerometerEvent.UPDATE, {Function
accX.text = e.accelerationX;
accY.text = e.accelerationY;
accZ.text = e.accelerationZ;
});Well, while this works fine in device central, with the sensor three showing 0 when the unit is always, when I install it in the device itself those are the default - -:
0,0195 G x
0,0195 G in Y
1,0152 G to Z
Does anyone have an explanation?
Then, the second strange thing is on camera obj. Here is the code:
import flash.media.Camera;
import flash.media.Video;var: camera = Camera.getCamera ();
var vid:Video = new Video (800, 480);
vid.attachCamera (cam);
addChild (vid);The displayed video is extremely slow, like 1-2 fps. Am I missing something?
Thank you
http://en.Wikipedia.org/wiki/G-Force#Measuring_g-force_using_an_accelerometer
I think your camera problem is a bug, the fix that will be available in the next version of AIR. The problem should disappear when you switch your app and back into him.
-
When I log on my computer its is open for a minute and then a blue screen with error lights and him stops
I can only log in safe mode of network.
original title: blue screen error
If you can properly connect mode without failure, you can use "msconfig" to toggle various programs that load at startup. Finally, find the one that is causing your program to crash.
"How to solve configuration errors by using the System Configuration utility in Windows XP"
<>http://support.Microsoft.com/kb/310560 >"System Configuration Utility overview"
<>http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/msconfig_usage.mspx?mfr=true>HTH,
JW -
Error handling: response of VI to any error
Hey guys,.
I make sure that a piece of code runs whenever there is a mistake in the VI. I'm pretty new to Labview and cannot wrap the head around to "extract" the errors, so I can share in an error handler... All I want is my code know that there is an error, do something and then stop execution.
Any help is greatly appreciated, thank you!
You simply wire the error for the selector of a box structure. Click on file/new/from model/frameworks/Subvi with Error Handling
Maybe you are looking for
-
Impossible to programmatically access a shared variable
Hello I am attaching a file in project where I created 2 shared variables When I try to access it programmatically im getting this error "error-1967362038 occurred to read Variable in Untitled 1." "vi IAK_SHARED: (Hex 0x8ABC700A) not found." can some
-
RECOVERY DISK FOR COMPAQ PRESARIO LAP TOP
Im making for the computer recovery disk portable mypresario. I cannot do the DVD using the program. How can I change the CD
-
Recovery partition after reclassification to win 8 to Win8.1
Recently, I used the recovery partition to reset my laptop. I used 8.1, was back to 8, then I did the upgrade to 8.1 again. I would like to recover the original factory state again, to start over. I learned there may be problems using the recovery pa
-
I did textbox in blackberry using EditField. his works fine, but its not displayed as textbox. You can never know who is the text box... his keyboard display only when I use to put emphasis on the editField. So I want to make a text box that appears
-
I have Win7 64 bit all the latest updates SP1, the value auto. What is this file for and why is it not identified by the creator? ANY information located on the web or on Microsoft as to what this file is or why it is there. Found in the Windows f