Several questions I need help solve

Similar Questions

• Need help solving any internet connection. This happened to me several months ago and the supplier

  Need help solving any internet connection. This just started today, but it's happened to me several months ago and at that time the provider thought it was software related and suggested that I have to contact HP. I have a HP 2006 m7674n, Windows XP. For several days, I worked with HardBeatZ on a different issue that has been resolved today. However, for several days, I had been working msconfig to track down the cause of the problem; This resulted in several reboots the computer - this would have something to do with it? Also, I just started getting a RUNAS box popping up. HardBeatZ has provided a link to a possible solution to this, but since I can't do internet connection I can't get the fix. Right now I'm on a laptop with Wi - Fi for the same service internet/modem as my PC. I changed nothing onmy PC in the last days of several for the internet connection or services.  I always use eithernet connection from the router to the computer. I tried Wi - Fi today with my PC but not connect. I tried to unplug the router and reconnect but it does not solve the problem. I did a Network Diagnostic and printed the report; Here are the warnings and error messages in this report:

  1. under the terms of the bridge diagnosis; Warning: "www.microsoft.comcould hostname not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: ' 12007 connection error at www.microsoft.com: the server name or address cannot be resolved. " and the error was unable to establish a connection.

  Still under network adapter diagnosis; It shows the connection status of network as "connected."

  Also, I have an older computer that I connected with eithernet and was able to connect to the internet but has been disconnected because the version of Windows is too old to support the connection. But I could briefly connecting on HP website before you log out. The point being I think it's a computer problem and not an internet router or provider problem.

  I read a few entries on this site and it seemed that the recovery of the system was the only solution. I hope that there are other things to try before I resort to that.

  I would appreciate any advice on the steps to diagnose the problem and insight as to what may have caused this to happen. Thank you. dt2012

  Sorry... still with you... OK, we know that your network card is good and we know that your first post;

  1. under the terms of the bridge diagnosis; Warning: 'host www.microsoft.com name could not be resolved (0x2afc error code). Could be the gateway or DNS problem.

  2. under diagnosis of layer IP; Corrupted IP routing table. Default route, road closures, route host itinerary local subnet and local are all valid; Invalid entries in the ARP cache. ACTION: the ARP cache has been emptied. »

  3. UNDER HTTP, HTTPS, FTP Diagnostic; all three had this warning: "error 12007 connecting to www.microsoft.com: the server name or address cannot be resolved." and the error was unable to establish a connection.

  4. still under network adapter diagnosis; It shows the connection status of network as "connected."

  For me, it seems that Internet Explorer is corrupted or damaged. Your computer is shipped with Microsoft Windows XP Service Pack 2 Media Center Edition 2005 but since you can have updated to XP SP3 or upgraded to a newer version of Internet Explorer. Please try the options listed in this document to Microsoft titled "how to reinstall or repair Internet Explorer" , since there are several options depending on your system configuration, please post if you need help to solve your problem.

• Question: I need help to install CS4 on a pc running Windows 10.

  Question: I need help to install CS4 on a pc running Windows 10.

  Hello

  Please Download CS4 products

  Kind regards

  Sheena

• Vmxnet3 questions. Need help!

  Hi all

  Deploy a virtual computer using powershell and powerCLi. Each VM has 4 adapters vmxnet3. Windows server 2008 is installed unattended.

  After windows setup is complete, I rename the LAN and INF1 INF2 INF3 adapters by running a script and restart the virtual machine.

  Once connected the names are preserved. But when I stop the virtual machine and poweron, adpaters, names are not preserved. . They are referred to as the connection to the LAN, local area connection2 and surrounding area connection3 connection1.

  Show Device Manager that previous maps are disconnected and from new cards.

  Any help much appreciated.

  Kind regards

  Bharath

  

  Think that this patch will help you:

  Windows 2008 R2

  http://support.Microsoft.com/kb/2344941

  Windows 2008 R2 with SP1

  http://support.Microsoft.com/kb/2550978

  MIT thank wurde/best greetings

  Andreas Neufert

  Veeam Software

  Central European systems engineer

  Konrad-Zuse-Platz 8

  81829 München, Germany

  + 49 173 8393888 mobile

  [email protected]<>[email protected]> email

  www.Veeam.comhttp://www.veeam.com/> web

  Andreas.Neufert.Veeam.com Skype

  Neufert-to - veeam.blogspot.comhttp://neufert-at-veeam.blogspot.com/> blog

  Hunderte VMs - Ausgereifte Antworten fur den Notfallhttp://go.veeam.com/wp-2011-virtual-backup-new-standard-de.html> white paper

  University of Veeam customer previewhttp://dl.dropbox.com/u/14976415/BackupCBTrev3.zip> training

  Http://neufert-at-veeam.blogspot.com/2012/02/Einrichtung-veeam-backup-replication.htmlof Virtual Lab Installationshilfe (deutsch) > training

  Von: bharathphatak [email protected]

  Gesendet: Mittwoch, 8 February 2012 11:48

  Year: Andreas Neufert

  Vacancies: New message: 'questions VMXNET3. Need help! »

  Http://communities.vmware.com/index.jspaVMware communities >

  Vmxnet3 questions. Need help!

  created by bharathphatakhttp://communities.vmware.com/people/bharathphatak> PowerShellers - view complete discussion onhttp://communities.vmware.com/message/1984625#1984625

• Run multiple chooses due to several input values (need help in SQL)

  Hello
  
  I would need to run multiple SQL select statements I get input of several results of the subquery. In my test case, I get three 3 results of the subquery
  
  Select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = "IHS" AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED
  The complete query is:
  
  SELECT SDE_ID, SERVER_ID, REGISTRATION_ID, TABLE_NAME, CONNECTOR, START_TIME, NODENAME OF THE
  
  * (select ALL_TABLES where LAST_ANALYZED is not null AND OWNER of TABLE_NAME = 'IHS' AND TABLE_NAME LIKE '_TBL_PROCESS %' AND (SYSDATE-LAST_ANALYZED) < 1 order by (SYSDATE-LAST_ANALYZED)) *.
  
  Can someone help me to get the appropriate SQL code?
  
  Thank you
  Dejan

  Right. I should have put a comment explaining that. I used the name A_TBL_PROCESS because the WHERE clause has
  'AND table_name like '% _TBL_PROCESS' ' then yes that should be a table name that will be selected.

• HP Slate 7. more than questions and need help

  Just him and it recharges but

  (1) when I go to MyComputer in Win7, the reader of slate is NOT displayed.

  (2) I want to transfer/download files of slate, but cannot do so if the reader of slate doesn't show; or can I?  Is there a workaround

  (3) how can I time "screen turned off" to stay longer.  Display disappears / goes dark after 1 minute.

  For anyone interested, there is a series of videos of courses on youtube: https://www.youtube.com/watch?v=vZd4eUSqAXs

  Hello and welcome to the HP support community!

  Here is a link to the Pages of Support for the 7 slate more.  Here you will find answers to many questions you may have.  There are some user Guides for download, FAQ, problem solving guides and much more.

  I have already answered in one of your other posts duplicated on the connection to your computer.

  To prevent display of the tablet to sleep longer, go to the settings app, then 'Sleep' on the right column.  Change to all you want but be advised - it displays when using the battery, the faster the battery can discharge.

  WyreNut

• 3 questions I need help

  Hi guys. Ive been given the VMware hardening document to follow and there are a few things im stuck on.

  1 to deny root FTP option generally I thought/etc/ftpusers would exist but it does not work, can anyone help with this for ESX 3.5 update 2

  2 also Im looking at a section in the document by "the center for internet security", who has a guide on the strengthening of the ESX, but document was completed in 2007 and it is recommended to change the umask for all the demons that syslog creates log files that are readable in the world, but when I do a ls - la in/var/log all files are updated

  -rw - 1 root root

  which is not world readable for me?

  3 to get ESX to authenticate to AD is to install services for Unix on the domain controller a must?

  Ideas or recommendations would be appreciated, I have about 10 ESX host, that I need to address this issue.

  Thank you

  Hello

  Hi guys. Ive been given the VMware hardening document to follow and there are a few things im stuck on.

  What Guide?

  1 to deny root FTP option generally I thought/etc/ftpusers would exist but it does not work, can anyone help with this for ESX 3.5 update 2

  No it would not exist because there is no FTP service on an ESX host. You can create the file to pass a check however.

  2 also Im looking at a section in the document by "the center for internet security", who has a guide on the strengthening of the ESX, but document was completed in 2007 and it is recommended to change the umask for all the demons that syslog creates log files that are readable in the world, but when I do a ls - la in/var/log all files are updated

  -rw - 1 root root

  which is not world readable for me?

  Some of them are world readable. Some are not. There are a LOT of files under/var/log. The simplest solution is to change the permissions that everything under this directory which is a file has only rw permanent... as the use of

  Find/var/log - type f-exec chmod 600 ().

  3 to get ESX to authenticate to AD is to install services for Unix on the domain controller a must?

  N ° it depends on what level of integration, you need... See http://www.astroarch.com/wiki/index.php/Remote_Authentication for a few ways to make partial or complete integration of ads into ESX.

  Ideas or recommendations would be appreciated, I have about 10 ESX host, that I need to address this issue.

  Best regards, Edward L. Haletky VMware communities user moderator, VMware vExpert 2009, url = http://www.dabcc.com/channel.aspx?id=279DABCC analyst [url]
  "Now available on Rough Cuts: url = http://www.astroarch.com/wiki/index.php/VMware_Virtual_Infrastructure_Security' VMware vSphere (TM) and Virtual Infrastructure Security: ESX security and virtual environment ' [url]
  Also available url = http://www.astroarch.com/wiki/index.php/VMWare_ESX_Server_in_the_Enterprise"VMWare ESX Server in the enterprise" [url]
  [url =http://www.astroarch.com/wiki/index.php/Blog_Roll] SearchVMware Pro [url] | URL = http://www.astroarch.com/blog Blue Gears [url] | URL = http://www.astroarch.com/wiki/index.php/Top_Virtualization_Security_Links Top security virtualization [url] links | URL = http://www.astroarch.com/wiki/index.php/Virtualization_Security_Round_Table_Podcast Virtualization Security Table round Podcast [url]

• 2 questions I need help

  Since the update of the firmware in September when I delete a song or photo and video if takes 3 minutes to do and then I get the white screen of death. Since it does not solve the firmware how do I remove it from my pc when I connect it to the pc without reformatting my rocket and losing everything (more than 1,000 songs)? the problem is that I have more than 100 photos I want to delete but it should always be if I do it this way.

  and

  When I convert a movie on my rocket (8 GB) their delay in the audio contrast of the video (about 4 seconds) what can I do for this?

  As long as you delete the files in the same mode USB (MTP or MSC) you transfer to the player in, you should be fine. If your screen INFO does not reflect changes in memory, it is possible that when the player is refreshing your media, it is simple to update existing information and not catch the memory now vacant.

  If you connect your player in MSC mode, you will see an MTABLE. SYS file in the root directory along with all files (MUSIC, PHOTOS, etc.). It is the file of the player database. Select, and then delete it. It's OK to do so. When you unplug your player, it will completely re - build the deleted file now database based on what it is (and isn't) currently on the player.

  Search now for your INFORMATION screen. Is there more free memory shown?

• BSOD-need help solve the problem.

  Hi, my computer just BSOD would for the first time and I have the analysis of the dmp file, can someone tell me the problem and how to solve?

  Crash Dump Analysis provided by OSR Open Systems Resources, Inc. (http://www.osr.com)
  Online Crash Dump Analysis Service
  See http://www.osronline.com for more information
  Windows 7 Kernel Version 7601 (Service Pack 1) MP (8 procs) Free x64
  Product: WinNt, suite: TerminalServer SingleUserTS Personal
  Built by: 7601.18409.amd64fre.win7sp1_gdr.140303-2144
  Machine Name:
  Kernel base = 0xfffff800`03008000 PsLoadedModuleList = 0xfffff800`0324b890
  Debug session time: Fri Oct  3 19:15:42.940 2014 (UTC - 4:00)
  System Uptime: 2 days 19:08:57.924
  *******************************************************************************
  *                                                                             *
  *                        Bugcheck Analysis                                    *
  *                                                                             *
  *******************************************************************************
  
  NTFS_FILE_SYSTEM (24)
      If you see NtfsExceptionFilter on the stack then the 2nd and 3rd
      parameters are the exception record and context record. Do a .cxr
      on the 3rd parameter and then kb to obtain a more informative stack
      trace.
  Arguments:
  Arg1: 00000000001904fb
  Arg2: fffff8800c77b558
  Arg3: fffff8800c77adb0
  Arg4: fffff8000303d7a1
  
  Debugging Details:
  ------------------
  
  TRIAGER: Could not open triage file : e:\dump_analysis\program\triage\modclass.ini, error 2
  
  EXCEPTION_RECORD:  fffff8800c77b558 -- (.exr 0xfffff8800c77b558)
  ExceptionAddress: fffff8000303d7a1 (nt!FsRtlUninitializeFileLock+0x0000000000000011)
     ExceptionCode: c0000005 (Access violation)
    ExceptionFlags: 00000000
  NumberParameters: 2
     Parameter[0]: 0000000000000000
     Parameter[1]: 0000000800000018
  Attempt to read from address 0000000800000018
  
  CONTEXT:  fffff8800c77adb0 -- (.cxr 0xfffff8800c77adb0)
  rax=fffff8a0113fed40 rbx=0000000800000000 rcx=0000000800000000
  rdx=fffff8a0113feb70 rsi=0000000000000705 rdi=0000000000000705
  rip=fffff8000303d7a1 rsp=fffff8800c77b790 rbp=0000000000000706
   r8=0000000000000000  r9=0000000000000000 r10=fffff8a0113feb40
  r11=fffff8a0113fec70 r12=0000000000000000 r13=0000000000000000
  r14=0000000000000000 r15=fffff8a0113feed8
  iopl=0         nv up ei ng nz na po nc
  cs=0010  ss=0018  ds=002b  es=002b  fs=0053  gs=002b             efl=00010286
  nt!FsRtlUninitializeFileLock+0x11:
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h] ds:002b:00000008`00000018=????????????????
  Resetting default scope
  
  CUSTOMER_CRASH_COUNT:  1
  
  DEFAULT_BUCKET_ID:  WIN7_DRIVER_FAULT
  
  PROCESS_NAME:  System
  
  CURRENT_IRQL:  0
  
  ERROR_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_CODE: (NTSTATUS) 0xc0000005 - The instruction at "0x%08lx" referenced memory at "0x%08lx". The memory could not be "%s".
  
  EXCEPTION_PARAMETER1:  0000000000000000
  
  EXCEPTION_PARAMETER2:  0000000800000018
  
  READ_ADDRESS: GetPointerFromAddress: unable to read from fffff800032b5100
  GetUlongFromAddress: unable to read from fffff800032b51c0
   0000000800000018 Nonpaged pool
  
  FOLLOWUP_IP:
  Ntfs!NtfsDeleteScb+240
  fffff880`012c6a70 e972feffff      jmp     Ntfs!NtfsDeleteScb+0xb7 (fffff880`012c68e7)
  
  FAULTING_IP:
  nt!FsRtlUninitializeFileLock+11
  fffff800`0303d7a1 488b6918        mov     rbp,qword ptr [rcx+18h]
  
  BUGCHECK_STR:  0x24
  
  LAST_CONTROL_TRANSFER:  from fffff800030c6b7e to fffff8000303d7a1
  
  STACK_TEXT:
  fffff880`0c77b790 fffff800`030c6b7e : fffffa80`6666744e fffffa80`000003ab fffff8a0`113feed8 00000000`00000000 : nt!FsRtlUninitializeFileLock+0x11
  fffff880`0c77b830 fffff880`012c6a70 : fffff880`0c77b8e8 fffff880`0c77b8e8 00000000`00000705 00000000`00000705 : nt!FsRtlFreeFileLock+0xe
  fffff880`0c77b860 fffff880`012cacdb : 00000000`01010000 fffff8a0`113feb70 00000000`00000000 fffffa80`00000028 : Ntfs!NtfsDeleteScb+0x240
  fffff880`0c77b8a0 fffff880`01244343 : fffff8a0`114bcb60 fffff8a0`113fec70 00000000`00000000 fffff880`0c77ba12 : Ntfs!NtfsRemoveScb+0x5b
  fffff880`0c77b8e0 fffff880`012c8a3c : fffff8a0`113feb40 fffff800`03223280 fffff880`0c77ba12 fffffa80`145e1570 : Ntfs!NtfsPrepareFcbForRemoval+0x53
  fffff880`0c77b910 fffff880`0124ba52 : fffffa80`145e1570 fffffa80`145e1570 fffff8a0`113feb40 fffff880`0c77ba00 : Ntfs!NtfsTeardownStructures+0xdc
  fffff880`0c77b990 fffff880`012d82d3 : fffffa80`0fa2f180 fffff800`03223280 fffff8a0`6366744e 00000000`00000009 : Ntfs!NtfsDecrementCloseCounts+0xa2
  fffff880`0c77b9d0 fffff880`0132ad32 : fffffa80`145e1570 fffff8a0`113fec70 fffff8a0`113feb40 fffffa80`0fa2f180 : Ntfs!NtfsCommonClose+0x353
  fffff880`0c77baa0 fffff800`03087261 : 00000000`00000000 fffff800`03374c01 fffffa80`169e8b00 00000000`00000002 : Ntfs!NtfsFspCloseInternal+0x186
  fffff880`0c77bb70 fffff800`0331973a : 00000000`00000000 fffffa80`169e8b50 00000000`00000080 fffffa80`0ca715a0 : nt!ExpWorkerThread+0x111
  fffff880`0c77bc00 fffff800`0306e8e6 : fffff880`02f65180 fffffa80`169e8b50 fffffa80`15f64640 00000000`00000246 : nt!PspSystemThreadStartup+0x5a
  fffff880`0c77bc40 00000000`00000000 : fffff880`0c77c000 fffff880`0c776000 fffff880`0c77b8a0 00000000`00000000 : nt!KxStartSystemThread+0x16
  
  SYMBOL_STACK_INDEX:  2
  
  SYMBOL_NAME:  Ntfs!NtfsDeleteScb+240
  
  FOLLOWUP_NAME:  MachineOwner
  
  MODULE_NAME: Ntfs
  
  IMAGE_NAME:  Ntfs.sys
  
  DEBUG_FLR_IMAGE_TIMESTAMP:  52e1be8a
  
  STACK_COMMAND:  .cxr 0xfffff8800c77adb0 ; kb
  
  FAILURE_BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  BUCKET_ID:  X64_0x24_Ntfs!NtfsDeleteScb+240
  
  Followup: MachineOwner
  ---------
  

  Great, keep me updated on the situation of the accident and let me know if it worked.

  Kind regards

  Patrick

• Construction of several slides/images - need help!

  Hello, I have only recently started to learn AS3 and have been unable to accomplish what I consider one of the most simplest tasks, create multiple images/slides. In fact, I was unable to conclude to the existence of what I consider to be a core function.

  I want to set up multiple pages, with a 'go to the next page button. For example:

  Executives Dias/1
  Go to the next slide button

  Now, when the user clicks the next button slide reach I would like the following to appear...

  Slide/Frame2
  Go to the previous slide, the button

  Noting that I don't want the scripts of the first frame/slide or objects are present or active on the second picture/slide.

  Thanks for the help.

  on your first image place a next button and previous button (for example, next_btn and prev_btn).  expand the layer that contains both on the scenario you want to act as a slide show.

  Create a new layer actions and add the following script:

  Stop();

  next_btn.addEventListener (MouseEvent.Click, nextF);

  prev_btn.addEventListener (MouseEvent.Click, prevF);

  buttonVisF();

  function nextF(e:MouseEvent):void {}

  nextFrame();

  }

  function prevF(e:MouseEvent):void {}

  prevFrame();

  }

  function buttonVisF (): void {}

  next_btn.visible = prev_btn. Visible = false;

  {if(this.currentFrame>1)}

  prev_btn. Visible = true;

  }

  If (this.currentFrame<>

  next_btn. Visible = true;

  }

  }

• Import of ODI 10.1.3.6 question. Need help

  I have the old back to the top of the ODI 10.1.3.6 (master and repository work) and import into the new installation of ODI 10.1.3.6 on my PC. I managed to import the master repository. But I forgor password from the repository to work so I can't import the working directory. I did following steps.
  
  1 installed ODI 10.1.3.6 on my PC (64-bit windows 7 Home premium)
  2. have you inside the repository master old backup zip file. (Has not created the new master).
  3. I can't sign in the designer because the work Rep is not yet imported.
  4. in the topology Manager, I must first of all insert new job REP but I do not have the old password work Rep.
  5. Once created rep work linked to the master imported rep, then I will import the old zip file work rep.
  
  How to solve this problem? The step above is correct?
  
  Thank you

  I've done some testing and it worked... Copy your password and try. Before performing the update do not forget to close studio odi.

  Let me know

• Dynamic Variables question. Need help as soon as possible :(

  Hi I am new to ActionScripts and I use about 3000 + variable. Hard coding each variable would take a lot of time and load time because I would be passing those variables to a php page in my fla.

  Here is my code:

  varReceiver = new LoadVars();
  varReceiver.load ("http://localhost/Syn... ")
  varReceiver.onLoad = function()
  {
  var DengueCasesZone;
  x = 1;
  so that (x < 12)
  {
  DengueCasesZone + x = number (this. [DengueCasesZone-x]) ;
  x ++ ;

  }

  I'm passing the variable DengueCasesZone from PHP to flash that has the same name to use in flash itself

  
  DengueCasesZone1, DengueCasesZone2, DengueCasesZone3 til DengueCasesZone12.

  Basically, I wanted to produce 12 variables in my above code

  I get an error when executing code that says "left side of the assignment operator must be variable or property."

  PS: I'm passing a string of my php to my flash which is / should be converted to a number.

  You target them incorrectly.  You use strings when you use the notation of support...

  varReceiver = new LoadVars();
  varReceiver.load ("http://...");
  varReceiver.onLoad = function()
  {
  x = 1;
  then (x<>
  {
  This ['DengueCasesZone' x] plus Number ((this ["DengueCasesZone" + x]));
  x ++ ;
  }

  just to confirm
  x = 1;
  then (x<>
  {
  trace (this ["DengueCasesZone" + x]);
  x ++ ;
  }
   
  }

• NEED HELP! HP Pavilion Entertainment PC has no audio

  Hello.

  My laptop has all of a sudden no sound after my update to windows update.

  Need help solving this.

  Thank you!

  Hello

  Try to use Recovery Manager to reinstall your original IDT HD Audio Driver - the procedure to use the Recovery Manager to reinstall the drivers and software is detailed in the document at the link below.

  Recovery Manager - Windows Vista

  After reinstalling, stop the laptop.  Disconnect the power adapter and remove the battery.  Press and hold the Power button for 30 seconds.  Reinsert the battery and plug in the AC adapter.

  Robinet tap away at the key esc that you start the computer to launch the Start Menu, and then select f10 to open the bios menu.  Press f5 to load the default values (sometimes it's f9, but the menu below indicates the correct key), use the arrow keys to select 'Yes' and press ENTER.  Press f10 to save the setting and still use the arrow keys to select 'Yes' and press on enter.

  Let windows take over completely for a few minutes and then check if your audio works.

  Kind regards

  DP - K

• Several VSS writers fail and my backups are failling too. Need help!

  Several VSS writers fail and my backups are failling too. Need help:

  I have a desltop installed SP3 x 64 XP and a laptop with seven x 64 SP1. In both the machine that my backups fail. I'm trying to back up data by using boats to storage, backup Windows also is failling. I'm taking a full backup on a USB external drive (2 TB).

  I did "vssadmin list writers" and showing several writers are in the failed State.

  I've done SFC/scannow, it did not help. There is no error in the disk and Chkdsk.

  I don't know how VSS works and how to solve the problem. Help, please!

  A lot of people told me they found this informative article. That's why I upgraded that and display back again.

  -------------------------------------------------------

  Before you stat is working on this issue make sure that the volumes have no system disk/file error. Run Chkdsk and ensure.

  (1) in the case of a failure of backup/writer, we first check the drivers associated with the VSS backup.

  These drivers are:

  VOLSNAP. SYS

  NTFS. SYS

  SWPRV. DLL

  -Check the version of above mentioned MS 3 files and update using MS Hotfix.

  If we have installed other suppliers, who might be the supplier of StorageCraft, Symantec suppliers and suppliers of Acronis, he must ensure that their files are also updated.

  Note: You can see the list of suppliers using this command: VSSADMIN LIST PROVIDERS

  Some of the DRIVERS PROVIDER commonly find are:

  stcvsm.sys

  symsnap.sys

  snapman.sys

  (2) this step is performed only when we find him

  VSS writers in a failed State. If we find the stable writers and backups still fail, or we get errors, do not perform this step if you please.

  In this case, the VSS writers fail, we can delete the following registry key, after of course saving and restart the server.

  HKLM/Software/Microsoft/EventSystem/{26c.../Subscriptions.

  This key will be automatically recreated when you restart and writers should return to the stable state.

  The writers pending the completion status is not a problem. It's also good that Stable.

  We can do on the Server 2003, 2008 and 2008 R2 OS as well.

  However, in Windows Server 2003, after you delete and restart the "vssadmin list writers" server cannot display all the writers, in this case must register the dll:

  For a list of the dll files to register, please check KB: http://support.microsoft.com/kb/940184

  Note: The reinstatement of dll in Windows Vista/2008 and especially is NOT recommended.

  (3) if we have only one / specificwriter (s) in a State of failure, which would always be SQL, EXchange, IIS or NTDS, then we have need to revive their respective service Console of service.

  If they fail repeatedly, then make sure that the application and its components are updated. See their respective engineers immediately. Make sure that the latest service packs and patches are installed.

  (4) make the foregoing, resolves generally 80 to 90% of the questions. If we believe that the issue is occurring, or we have VSS event errors, it may be the providers, the origin of the problem. If the creation of the snapshot does not properly, it can affect writers and other components involved.

  Please check providers using "vssadmin list providers. If we find any other provider, other than the Microsoft software shadow copy provider, we have to remove from the list.

  To do this: start the registry editor.

  HKLM/System/CurrentControlSet/Services/VSS/suppliers/GUID.

  One GUID would be for Microsoft Software Shadow Copy provider. The other GUID would be for other providers such as StorageCraft. We will save the GUID, and then delete it. Then restart the machine.

  Now when we do vssadmin list providers, we will see only the default Microsoft provider.

  I have seen in many cases where our supplier of StorageCraft may not work properly and continue of not not the authors. In such

  case, if we get rid of the supplier, then the issue is resolved and not re occurs.

  -However this would impede the functionality of StoaregCraft or any other similar to this backup software.

  That's why to engage respective software tech support for further assistance.

  (5) If a shadow copy is enabled on the volume, make sure that the storage area is set to the default location.

  For example:

  If we take a snapshot of C: then the storage area should be C:

  We are changing that, if we do not have enough free space (at least 300 MB) free.

  We can click with the right button on the volume, goto the cliché tab and change it accordingly.

  Also note that the minimum value of the storage area should be 300 MB and maximum can be 3000 MB.

  We can also set any value between the two, which is a multiple of 300, 600, 900, 1200, 1500 etc... According to the available space.

  In the cases where errors in the event viewer on wait times (event id: 12298, 12310, 2004, 12290) then we also need to put the MinDiffArea in the registry.

  HKLM/System/CurrentControlSet/Services/Volsnap

  Right side, new DWORD VALUE - "MinDiffAreaFileSize" - change and set the value between "300-3000 Mo" or any multiple

  300 between the two. Ideally, we can define it on 3000 MB which works even better if we have space.

  Ref: http://support.microsoft.com/kb/826936

  (6) also, please make sure we have plenty of free space. If we go by the book, a snapshot requires at least 10% of the volume

  to be free.

  Storage controllers (SCSI/RAID controllers) could also be a problem and may need to be updated.

• [SOLVED] I need help for Shared Documents and Documents on my computer XP Home

  I need help with my shared Documents and other folders on my computer. I have an administrator account. My son has a limited access account.

  I clicked on the option 'make my private files and folders '.  His file was renamed to Documents now my shared Documents. It's just my account.

  I tried to undo what I did. I tried everything (I mean everything) has proposed to do online.

  First of all, I logged in Safemode administrator account. I went to the Documents folder, and I've added the Administrators group and click full control.

  Then I restored system a few weeks before. Then, I went to http://computers.douglasthrift.net/winxpfaq/#faq3_shared_documents and did everything.

  None of them worked. I did so much, that I don't remember.

  Then, I found that the registry key for the Shared Documents lacked in the MUi cache. @shell32.dll,-21785. I entered, but after I rebooted a few times, he disappeared. I have to hurt... In addition to this. Now I face a different problem. I don't know it is normal but when I login my account and click on

  My computer, I see Documents of my name and the name of my son in addition to Documents (Shared Documents).

  When I save a new file in the My Documents folder, it is automatically created in the folder of Documents of my name, too. I can't delete them because they are system folders. I crossed my registry keys in the MUI cache and discovered that 4 of them did not exist in other accounts.

  @shell32.dll,-21792; 21793; 21794; 21795 (%, etc. of music of % documents). I don't know if I can delete them or not.

  I'm not an expert in computers. I'm sorry that it is very long.  I hope someone can help me. Thank you.

  Hello

  I suggest you follow the troubleshooting steps and check if this solves the problem on your computer.

  Method:

  Ra SFC scan to search for the missing or corrupt files that can cause this problem.

  Of file system (CFS) when checking that all the Windows XP system files are intact and not altered, changed or damaged.

  a. Click Start, click programs, accessories, command prompt principally made.

  b. in the type in the following command prompt window and press ENTER:

  sfc/scannow

  If you are prompted to insert the Windows XP disc, load the disc of Windows XP on the CD drive on your computer.

  Once the scan finished restart your computer and test to see if the problem you are experiencing is resolved or not.

  Reference: http://www.microsoft.com/resources/documentation/windows/xp/all/proddocs/en-us/system_file_checker.mspx?mfr=true

  I hope this information helps. Please get back to us if you have any other questions on this subject.