Several select Insert null during the first

Similar Questions

• Satellite L500-1ZR - battery died during the first installation

  Hello

  I really hope someone can help me.

  During the first time I started my new Toshiba Satellite L500-1ZR battery died and my laptop turns off. I was in the middle of the installation and now when I start it, it gives a word of warning: "the computer restarted unexpectedly or encountered an unexpected error." Windows Setup cannot continue. To install Windows, click OK to restart the computer, and then restart the installation. "However, when I click OK it restarts and I find myself the exact same caveat. I tried F2 and F12 to see if he had options to do a startup repair and also I inserted a disc on which I downloaded a hardware configuration, but it won't work.

  Anyone got some ideas on how to solve this problem?

  Thanks in advance.

  Hi belisu,

  The advanced boot menu, you can access via the F8 key before Windows starts.
  With the F2 and F12 button, you can access the BIOS menu and start.

  So try to use the F8 key to access the Windows Advanced Boot menu and try to start the Windows repair option. It starts from Toshiba HARD drive recovery and restore settings factory.

  Good luck! :)

• blank resource visa info during the first round

  Hi all

  I am trying to run the pilot of 6100 fluke on a fluke remote 6100.  When I run the initialization of the remote device, I always get the following error message:

  VISA: (Hex 0xBFFF000E) the given reference of session or the object is not valid.

  I followed the problem and saw that the visa being passed resource name contains no valid information (see below).  That is not sensible, since when I select the name of the resource from the drop-down list, the program has clearly recognized the remote device.  Why the program allow the user to select the resource of visa but won't visa valid for driver information?

  This error occur only during the first inning.  If the user run the program again, the error disappears.  Can anyone help?  Thank you!

  Yik

  When the program is run for the first time, visa name contains valid information:

  General

  The resource name of the canonical VISA = blank

  Visa refnum = white

  Session ID = 0

  I/O timeout = 0

  Type = 0 INTF

  Value = empty

  Stop? = True

  Condition

  session valid? Fake

  Instr is? = False

  Stop? True

  AHA!

  You select the resource from the drop-down list BEFORE the start of the loop?  An SR might help

• Other results: preliminary report does not properly during the first run in a loop

  I have an unusual problem with NI TestStand 4.1. I have a loop For and it contains, I have a call from sequence configured as a test of numerical limit. This test is configured to report additional results. All other results are preconditioned test cases. Here's the unusual part: during the first iteration of the loop, the test passes yet additional results for the parameters of all inputs are reported (output parameters are not presented at the time, but more on this later). Spend all additional this test iterations in the loop For and additional results are not reported.

  Regarding output parameters... If a test fails I'm expecting (input and output parameters) results to report. However when I encounter a failure only the additional results that are output parameters are displayed on the test report. Input parameters are not reported.

  If anyone else has experienced this? My expectation was that all additional results would be declared in case of failure. In addition, in the absence of a failure I expect not to see additional results. Thanks in advance!

  The short answer is that the condition of additional results for input is evaluated before it's called the subsequence, so that it uses the value of the previous iteration Step.Result.Numeric (or by default on the first).

  You can see this described as stage 15 in the following link:

  http://zone.NI.com/reference/en-XX/help/370052P-01/tsfundamentals/infotopics/step_execution/

  Kind regards

• My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

  My photography plan has expired during the first month, I can't update and make a new payment, what should I do?

  You can also make reference to: FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• I want to cancel my plan during the first month. How do I?

  I want to cancel my plan during the first month. How do I?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific Time)

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• HP Envy 15 t-j1000: HP Envy 15 t-j1000 Select Edition died during the night?

  I tried to start up my HP Envy 15t - j1000 select edition yesterday morning and I get no response what so ever. At first I thought I had left it on the exhaustion of the battery during the night. However, after a lot of troubleshooting (remove the battery and you try to start on the whole, hard reset, try another AC charger, removing RAM Modules and other components) I still can't you it to Sunrise power. The power led next door where my adapter plugs on it used to light either. It's as if the machine of the entry is completely dead, has no sense as long as its been runing perfectly without any problems.

  In addition, it has beats audio, but no button beats on the chassis (as far as I can tell) because I know it's a problem reported causing some laptops with her boot.

  Help, please!

  Hi @DrexLock,

  Thank you for your update.

  I understand you have changed the power button Board and the problem persists.

  The led indicates the power is getting to the laptop. After replacing the power button you know power going to the motherboard, but it seems to stop there.

  The next step would be to replace the motherboard.  Because they tend to be expensive, you can do a price comparison to see if the replacement of the motherboard, or the purchase of a new laptop is the best option for you.

  Good luck!

• BlackBerry Smartphones New - fatal error during the first update by using the Office Manager phone

  During my first update using the Desktop Manager, there were 13 steps, and I had to unplug to half way through.

  Now when I try to repeat the process, the update gets steps 1-6 and just after reconnecting to JVM (step 6) I get a "fatal error update device software, please try again" I tried several times and it always stops in the same place.  The phone then has the radio turned off, and I have to restore the connections.

  I'm not an irritable person, so any help would be appreciated.

  Thank you!!!

  Never disconnect during an update. Never.

  This is therefore a new phone, follow the instructions below.

  First, remove the battery from the BlackBerry when lit, to subject a minuite, replace and see if it restarts. If this is not the case, continue below.

  First find your operator and the system operating file that you want to use.
  http://NA.BlackBerry.com/eng/support/downloads/download_sites.jsp

  Make a backup of your device first, using Desktop Manager > backup. Close the office at the end Manager.

  1. download the OS files to the PC then install on the PC by running (double click) the downloaded file.
  2. go in c:\program files Research in motion\apploader and delete the file named "vendor.xml."
  3. plug in the BB and double-click on "Loader.exe." It is located in the same place as the above vendor.xml file.

• How to select and default hightlight the first line in a programmatic Table(ADF Table created based on a SortableModel) ADF.

  Hi all

  
  

  We use JDeveloper Studio Edition Version 12.1.3.0.0 and deployed on GlassFish Server Open Source Edition 3.1.2.2 (build 5) and connect to the SQLServer database.

  
  

  We created a table ADF programming related to a SortableModel created programmatically to a bean.

  
  

  We need to select and highlight the first row in the table just after making it to retrieve data based on the first line.

  
  

  We tried the based on the following thread: How to call the bean support just after JSFF / page fragment loads? and a few other posts online, but it does not work very well.

  
  

  W has created a hidden text in the bottom of the JSF model as follows:

  
  

  < af:table varStatus = "rowStat" Summary = "table" value = "#{pageFlowScope.crudBean.dynamicTable.collectionModel} '"

  Rows = "#{pageFlowScope.crudBean.dynamicTable.collectionModel.RowCount} '"

  contentDelivery = 'immediate' var = 'row' rendered = 'true '.

  Binding = "#{backingBeanScope.crudBackingBean.tasksTable} '"

  selectionListener = "#{backingBeanScope.crudBackingBean.customListener} '"

  "rowSelection ="single"id ="t1"partialTriggers =": pt_gr2 "columnStretching =" column: clmn0 ">

  < af:forEach items = "#{pageFlowScope.crudBean.dynamicTable.columnNames}" var = 'name' varStatus 'vs' = > "

  < af:column sortable = "true" sortProperty rowHeader = "#{name}" = "no style" headerText = "#{pageFlowScope.crudBean.dynamicTable.columnLabel [name]}" "

  inlineStyle = "width: 100px;"  ID = "clmn$ {vs.index}" >

  < af:activeOutputText value = "#{row [name]}" id = "aot1" / >

  < / af:column >

  < / af:forEach >

  < / af:table >

  ....

  
  

  < af:outputText id = "hiddenOutputTextId" visible = "false" value = "#{backingBeanScope.crudBackingBean.afterPageLoad} '"

  Binding="#{backingBeanScope.crudBackingBean.hiddenOutputText}"/ >

  And we have added the code to the bean to support below:

  public String getAfterPageLoad() {}

  If (!.) {AdfFacesContext.getCurrentInstance () .isPostback ()}

  selectFirstRowInTasksTable();

  }

  Return afterPageLoad;

  }

  public void selectFirstRowInTasksTable() {}

  try {}

  RKS RowKeySet = new RowKeySetImpl();

  RowKeySet rksEmpty = new RowKeySetImpl();

  Model CollectionModel = tasksTable.getValue ((CollectionModel));

  ROWCOUNT int = model.getRowCount ();

  If (rowcount > 0) {}

  model.setRowIndex (0);

  Key of the object = model.getRowKey ();

  RKS. Add (Key);

  tasksTable.setSelectedRowKeys (rks);

  SelectionEvent selectEvent =

  new SelectionEvent (tasksTable.getSelectedRowKeys (), rks, tasksTable);

  selectEvent.queue ();

  customListener (selectEvent); / / to retrieve data

  AdfFacesContext.getCurrentInstance () .addPartialTarget (tasksTable);

  }

  } catch (Exception e) {}

  }

  }

  I think that () selectEvent.queue; should work even without calling the customerListener, but it is not working in all cases.

  What is the problem in my code?

  
  

  
  

  Have you tried to bind property of 'selectedRowKeys' to selection configuration / bean there?

  Something like:

  public RowKeySet getSelectedRKS() {
      if (rks == null) {
          // make first record as selected
          // create RowKeySet and assign it to rks variable(where rks is variable defined in bean with some scope higher than request scope)
      }
      return rks;
  }
  

  Dario

• [JS] CS6-&gt; how to insert character at the first location of text style range

  Hello

  I have a string of text that has a block of text, anchored in the first character position of a range of text Style.

  The I normally updated text is to insert text around the ankles and that works, but I can't seem to make it work if the anchor is located at the first character.

  Example, where [a] represents the location of the anchored object (the special character):

  [a] my text

  new text:

  Under the pretext of [a] my updated text

  If this is not possible, then it is possible to move the anchor point?

  Any ideas? Thank you

  Hello

  Because you selected the frame, you can try to feed the fist PointInsertion content:

  App.Selection [0] .insertionPoints [0] = .silence 'before the anchor. "

  HTH,

  Loïc

• Cannot access a property or method of an object coming null for the first time reference

  Hello

  I have four components, two textInputs and two Date fields.
  Where my requirement is enetred TextInputs in one line and display DateFileds selected in another line in a text box.

  < mx:Canvas label = "Search Datebase" toolTip = "Search Datebase" >

  < mx:TextInput id = "FromTI" x = "85" width = "373" change = "enterContext ()" / > "
  < mx:TextInput id = "ToTI" x = "85" y = "33" width = "100%" change = "enterContext ()" / > "

  < mx:DateField id = "AfterDF" x = '80' y = '17' / >
  < mx:DateField id = "toDF" x '80' = y = "56" / >

  < / mx:Canvas >

  I tried this way:

  Application.application.myTA.text = FromTI.text +""+ ToTI.text + "\n"+AfterDF.text+""+ toDF.text;

  
  The problem is, I get this error whenever I walked into something on the FromTI TextField (it's only coming for the first time)

  Could someone please help me, thanks.

  Initially, I would do the following, to see who has the null value:

  if(application.application.myTA == null) {}

  trace ("application.application.myTA");

  }

  if(FromTI == null) {}

  trace ("FromTI");

  }

  if(application.application.myTA == null) {}

  trace ("ToTI");

  }

  if(application.application.myTA == null) {}

  trace ("AfterDF");

  }

  if(application.application.myTA == null) {}

  trace ("toDF");

  }

  However, if one of these referenced components are in the opinion of non-use first to a ViewStack, accordion or TabBar, and this container navigator isn't creationPolicy = "all", then it will probably happen.

  If this post answers your question or assistance, please mark it as such. Thank you!

  http://www.chikaradev.com
  Adobe Flex development and Support Services

• Insert hyphen after the first two digits

  I don't see just how I can insert the hyphen in one of my filed talbe. for example I have 123456789, 321654987 I want just to add the hyphen after the first two digits. 12-3456789, 32-1654987. Do I need an update statement to change that in my talbe. Thank you

  Of course, the column is VARCHAR2, then

  UPDATE t
     SET a = SUBSTR( a, 1, 2 ) || '-' || SUBSTR( a, 3 );
  

  Or you can leave it as it is and create a new view on the table in the format of the string you want.
  Or you can just format the selection of the table.
  Or you can add a virtual column with data formatted as you wish.

  All depends on your needs.

• Skype no sound during the first call, a constant buzzing afterwards.

  Hello

  I'm running Debian unstable, and I've recently updated my system after several months of not doing (the last time was before the latest version of Debian). Once the upgrade is finished, I noticed that Skype (I have 4.2) had ceased to work properly with the following symptoms:

  • If I make a call immediately after the start of Skype, I get no sound. I can see in the controls of PulseAudio that Skype has opened an output stream, and yet nothing comes out the speakers. The microphone, on the other hand, works fine (the other part of the call confirmed that they could hear me).
  • If I can put an end to this call and try to start another one, without leaving Skype first, a buzzing begins at the time the call is trying to produce a sound. The buzz persists even after that I ended the call and indeed persists until I have quit Skype.

  Since I've updated many packages at once, it is virtually impossible to tell what package updates may have caused this. In addition, the problem is specific to Skype; all other sound generating programs work very well. In any case, I would be happy to provide you with additional information that might help.

  Thank you

  Vasilis

  I actually "solved" this by running Skype from the command-line in the following way:

  PULSE_LATENCY_MSEC = 30 Skype

  It is still is not ideal because it does not work out of the box, but it does the trick. However, in the meantime, it stopped recognizing my webcam, so things aren't great yet. :-(

• void / buttons vi of the single of structure event during the first round.

  I have a project that contains separate programs. In the past (for 15 years), I develop a 'main Menu' which uses a structure of producer-consumer (events). The user selects "Program 1" says event loop of consumer to open "program 1". Program one opens, running tests, exit button returns the user to the main Menu. All programs are maximized, open front audio, closed when finished, etc.

  It is the first project that I did in LV 2013 as it and now it does not work. If I go back to the main Menu and reinstate the program 1, none of the operator buttons don't market, which are supported in a loop of event also structure/consumer.

  No variable is passed to and from the main Menu. Each separate program uses the structure of consumption of the producer with an additional of 10 ms loop that reads/writes on DAQmx tasks. All tasks are closed and removed to exist, the queues are closed.

  I'll continue searching for a solution in the discussion forums and knowledge base but if someone sees what I'm doing wrong, please let me know!

  Thank you.

  I put this little sequence before I call the initialization block and now it works... Usually I initialize my variables in the block of initialization, but for some reason that this program doesn't. My producer loop check for "first time" so that they do not give up so I don't know why it has to be added.

  Seems to work but I'm going to run the whole project a couple of times to make sure.

  

• 10 free of charge during the first year Windows update - include Windows XP and Vista?

  Hello

  I read in the press last week that Microsoft will offer a free upgrade of Windows 10 for users of Windows 7 and 8 for a period of one year after its initial launch.  My question is Microsoft will expand the offering to users of Windows XP and Vista?

  As long as the material can cope with the new operating system - and it seems to be able to scale up to a certain extent - surely, it would be more beneficial to all parties that as many possible Windows users get the new standard rather than race systems not supported / dangerous or ineffective.

  I know several users who are quite happy with their existing equipment, but are showing more concern with the lack of support from their systems and they cannot afford to upgrade their hardware right now.  There are also many companies who do not want the additional costs of purchasing new computers if its computers are fit - for-purpose (except for the lack of OS support...).

  If the grand design is to get Windows facilities as 10 in the first year, then it would seem preferable to offer either to these users:

  (a) a free upgrade like any other Windows user

  (b) a small fee upgrade - say £10 - get to 10 Windows

  Concerning

  Nick Anderton

  Hello

  I read in the press last week that Microsoft will offer a free upgrade of Windows 10 for users of Windows 7 and 8 for a period of one year after its initial launch.  My question is Microsoft will expand the offering to users of Windows XP and Vista?

  Right now, this offer is only available for Windows 8/8.1 and Windows 7 users, but if you migrate your installation of Windows XP now to preview Windows 10, you will receive the promotion.

  As long as the material can cope with the new operating system - and it seems to be able to scale up to a certain extent - surely, it would be more beneficial to all parties that as many possible Windows users get the new standard rather than race systems not supported / dangerous or ineffective.

  I know several users who are quite happy with their existing equipment, but are showing more concern with the lack of support from their systems and they cannot afford to upgrade their hardware right now.  There are also many companies who do not want the additional costs of purchasing new computers if its computers are fit - for-purpose (except for the lack of OS support...).

  If the grand design is to get Windows facilities as 10 in the first year, then it would seem preferable to offer either to these users:

  (a) a free upgrade like any other Windows user

  (b) a small fee upgrade - say £10 - get to 10 Windows

  Concerning

  Nick Anderton