Several system crashes due to blue screen errors

Similar Questions

• Pavilion m9340f crashes with a blue screen error. Windows 7 Ultimate 64

  Running Windows 7 on my computer of Pavilion m9340f, I lived occasional crashes 'blue screen '. To try to solve the problem, I inserted carelessly the original Windows 7 DVD in the drive of the computer, thought could be used to repair the problem, or "reboot" of the software. What has resulted, it was that the newly installed Windows 7 was found to be "not a copy genuine Windows" and would not allow me to use the features of the operating system.  I was then told to format the hard drive of my computer, I did, and I did a clean install of Windows 7 Ultimate, which now has been accepted as authentic. Initially, the computer seems to work normally, but BlueScreen crashes became more frequent, occurring almost every time I used the computer. I run HP Diagnostics that shows no problem. I have eliminated most of the software programs that could cause a conflict. I am running, currently: Norton 360 first Edition, Microsoft Word 2010 and Google Chrome - one of them could be the cause of the conflict? Please advise on possible solutions. Thank you!

  Steve N.

  Hi Steve,.

  Try to delete (see below) everything except a strip of Ram in the computer and then see if it will work normally.  If this is the case, add another stick in and try again - as soon as the blue screen events happen, you will know that the last stick of ram you have installed is the problem.

  If the PC bluescreens yet with one stick of RAM, try the same stick, but in a different location - if it works OK now, this may indicate that the location of memory has failed.  If there's some bluescreens, remove the Ram and try the process above with a different memory module.

  Guide for the addition or deletion of Ram.

  Let me know the result of this.

  Kind regards

  DP - K

• Blue screen errors, hard disk crash and now the windows activation question

  These last six months, I had a problem of error frequent blue screen crash. Suddenly last month the drive crashed, hard my computer didn't load windows on several effors, finally the hard disk had to be changed. Reinstalled the operating system after copying the files of restoration for windows, now windows says is not a genuine copy. Now, today still crash blue screen error after from once again, he says that this window is not genuine. MT laptop is a sony vaio 3 years old and came with a preinstalled windows 7 licenses and the key that I use is one written behind the laptop on the microsoft certificate.

  He seems to have removed the incompatibility of CID at least.

  Please try activating suggestion of Andre now - the system is now simply say that it is out of time, require activation by telephone.

  activation by telephone (call of the operator)

  Click the Start button

  in the search box, type

  SLUI 4

  and press the Enter key

  Follow the instructions, but when asked what service you need the ansafone phone, don't answer - it should oblige the operator to answer, who can deal with you

• Satellite L20 error: DVD - RAM crashes with a blue screen with the use of cd-audio

  Hello world

  I have a very annoying problem: when I use audio-cd, my Satellite tends to crash with a blue screen. When it crashes, blue screen, scrolls and immediately a black screen and a restart follows.

  It is probably a driver problem, because I have three audioprograms installed (Windows Media player, Sonic Stage MiniDisc and I-tunes).

  Can someone give me advice? Thanks in advance

  Klaas

  Hi Klaas,

  It would be useful to know what the error message is when you get the blue screen. I suggest that you disable the restart automatic installation so that your laptop stops on the blue screen and you can read the error.

  To disable the auto restart: -.

  1. right click on 'My computer' icon and then click on "Properties".
  2. click on the "Advanced" tab
  3. click on 'Settings' in the section starting and recovering (towards the bottom of the window).
  4 uncheck 'automatically restart '.

  Please post again all the details of the blue screen error message.

  concerning

• VAIO will not boot xp. Crashes with blue screen error.

  VAIO will not boot xp.

  Sony Vaio PCG - 691L
  XP, installed at the factory has SP3 update.

  .5gig ram

  I worked on the machine to get to start XP. Sometimes it will boot in Safe Mode, but most of the time (and when it does not start in 'normal' mode), it crashes with a blue screen. The blue screen flashes fast to read, and then the machine tries to restart.
  Once I do start safe mode and got WIndows update but can't update due to the update that needs to be in normal mode.
  I was able to install Malwarebytes and a full scan. Also installed Spybot S & D and performed a full scan.

  When it does not start in normal mode it is slow, very slow. I tried rkill and it causes the machine down.

  It starts in normal mode today, but it crashed before I can get open IE and go to the windows update.

  Help...

  Thank you

  Rick

  Tired of playing with this. Re-install xp.

  Thank you...

• System unexpectedly stop restart and go to the blue screen "error code 0141.

  Original title: error code

  my lap top is suddenly happened to bluescreen, shut down and then after reboot, one, (error code 0141), appears. can you please tell me how to fix this?

  Hello

  Thank you to contact the community Microsoft and we will be happy to help you with your concern.

  According to the description, it looks like you have a problem with Windows Vista, getting automatically restart with a blue screen.

  He would be grateful if you can answer this question in order to help you further.

  1. have you made changes on the computer before this problem?
  2 what happens while accessing any special request or programs?

  I suggest you to check the information contained in the event logs? (Event Viewer)

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  Perform a clean startup will check if any third-party application is causing the problem, as the clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows vista: http://support.microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 3: to reset the computer as usual.

  I suggest you to see the steps in the following Microsoft article and check if it helps.

  How to fix a blue screen stop errors that cause Windows Vista to shut down or restart unexpectedly: http://support.microsoft.com/kb/958233

  Resolve stop (blue screen) errors in Windows 7 (similar to a few steps of the mentioned below, the section applies to windows vista): http://windows.microsoft.com/en-US/windows7/Resolving-stop-blue-screen-errors-in-Windows-7

  Notes:

  When you perform the system restore to restore the computer to a previous state, programs and updates that you have installed are removed.

  Before you perform the upgrade installation, I recommend you back up your files using windows backup.

  We would be more than happy to help you if the steps above did not solve the problem.

• Windows Vista, several blue screen errors

  Original title: BSOD

  Good afternoon

  I have the BSOD. Here they are in chronological order:

  1 IRQL_NOT_LESS_OR_EQUAL 0X0000000A (0X0000001D, 0XFFFFFFC2, 0X82424EF8, 0X00000001)
  2 0X000000c4 (0x000000A0, 0X96AEEA58, 0x995FCEE0, 0x0D99EEE4)
  3 0X000000c4 (0x000000A0, 0X968F0DF0, 0x99406EE0, 0x053F1D0A)
  4 0X000000c4 (0x000000A0, 0X9A651638, 0x993C4EE0, 0x10AB65F8)

  Additional information:

  Windows Vista Service Pack 2

  DualCore Intel Core 2 Duo E8400 3000 MHz (9 x 333)

  Gigabyte GA-G33M-DS2R (2 PCI, 1 PCI-E x 4, 1 PCI-E x 16, 4 DDR2 DIMM, Audio, Video, Gigabit LAN)

  DDR2-800 DDR2 SDRAM

  BIOS: Award BIOS v6.00PG Modular

  Could you help me... don't really know what to do...

  Hello

  Check this thread for more information using BlueScreenView, MyEventViewer and other methods
  to troubleshoot the BlueScreens - top 3 responses (+ 1 other).

  http://social.answers.Microsoft.com/forums/en-us/vistarepair/thread/3deab2fa-4000-4136-8c78-a3d22b1db009

  We can analyze the minidumps if make you it available to the SkyDrive or another file
  sharing sites (such as MediaFire). If you have problems to download the copy of minidumps
  for the office or in the Documents folder and download them from there.

  ZIP or download the content of the C:\Windows\minidump

  Use SkyDrive to upload collected files
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  ----------------------------------------------------------

  BCCode: 0a 0x0000000A

  Drivers could be at fault, however the problems of disk or security/antivirus/antispyware products are
  just as likely to be the root cause that they can force a driver to corrupt or go out of bounds.
  The video driver or something affecting it would be questionable.

  At the end of this message, I'll post a bluescreen generic and in the next convenience store
  How do to update the drivers and BIOS but also to check memory message.

  -----------------------------------

  BCCode: 0a 0x0000000A

  Cause

  This bug check is issued if the memory paged (or invalid) is accessible when the IRQL is too high.

  The error that usually generates this bug check occurs after the installation of the faulty device driver or service system, BIOS.

  If you encounter a bug 0xA control during the upgrade to a later version of Windows, this error can be caused by a device driver, system service, an anti-virus or a backup tool that is not compatible with the new version.

  Solve the problem

  If a kernel debugger is available, get a stack trace.

  To resolve an error caused by the faulty device driver or service system, BIOS

  1. Restart your computer.
  2. Press F8 to character-based menu that displays the choice of operating system.
  3. In the WindowsAdvanced Options menu, select last known good Configuration . This option is most effective when a pilot or a service is added at a time.

  To resolve an error caused by an incompatible device driver, system service, virus scanner, or backup tool

  1. Check the system log in Event Viewer for error messages that may identify the device or driver that caused the error.
  2. Try disabling the cache in memory of the BIOS.
  3. Run the diagnostics of equipment provided by the manufacturer of the system, in particular the scanner memory. For more information about these procedures, see the manual of your computer.
  4. Make sure that the latest Service Pack is installed.
  5. If your system has cards (SCSI) small computer system interface, contact the card manufacturer for updated Windows drivers. Try to disable sync negotiation in the SCSI BIOS, check the wiring and the SCSI ID of each device and confirming the proper termination.
  6. For devices (IDE) peripheral electronic integrated, set the built-in as only primary IDE port. Also, check each IDE device to the right setting master/slave/stand alone. Try to remove all IDE devices except for the hard drives.

  If the message appears during installation of Windows, make sure that the computer and installed devices are listed in the list of the products tested Microsoft Windows market.

  Comments

  Before upgrading to a new version of Windows, remove all third-party device drivers and system services and disable any antivirus. Contact software manufacturers for updates of these third-party tools.

  BCCode: 0a 0x0000000A<-- read="" this="">
  * 1025.html http://www.faultwire.com/solutions-fatal_error/IRQL-not-less-or-Equal-0x0000000A-

  ==================================================================

  Look in the Event Viewer to see if something is reported on those.
  http://www.computerperformance.co.UK/Vista/vista_event_viewer.htm

  MyEventViewer - free - a simple alternative in the standard Windows Event Viewer.
  TIP - Options - Advanced filter allows you to see a period of time instead of the entire file.
  http://www.NirSoft.NET/utils/my_event_viewer.html

  -------------------------------------------------------------------------
  Also this, so you can see the probable bluescreens.

  Windows Vista restarts automatically if your computer encounters an error that requires him to plant.
  http://www.winvistatips.com/disable-automatic-restart-T84.html

  -------------------------------------------------------------------------

  Here are a few ways to possibly fix the blue screen issue. If you could give the blue screen
  info that would help. Such as ITC and 4 others entered at the bottom left. And all others
  error information such as codes of STOP and info like IRQL_NOT_LESS_OR_EQUAL or PAGE_FAULT_IN_NONPAGED_AREA and similar messages.

  As examples:

  BCCode: 116
  BCP1: 87BC9510
  BCP2: 8C013D80
  BCP3: 00000000
  BCP4: 00000002

  or in this format:

  Stop: 0 x 00000000 (oxoooooooo oxoooooooo oxoooooooo oxooooooooo)
  Tcpip.sys - address blocking 0 x 0 00000000 000000000 DateStamp 0 x 000000000

  It is an excellent tool for displaying the blue screen error information

  BlueScreenView scans all your minidump files created during 'blue screen of death '.
  hangs and displays information about all accidents of a table - free
  http://www.NirSoft.NET/utils/blue_screen_view.html

  BlueScreens many are caused by old or damaged, in particular the video drivers drivers however
  There are other causes.

  You can do without if needed fail or the Vista DVD or recovery command prompt mode
  Options if your system was installed by the manufacturer.

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  You can try a system restore to a point before the problem started when one exists.

  How to make a Vista system restore
  http://www.Vistax64.com/tutorials/76905-System-Restore-how.html

  -------------------------------------------------------------------------

  Start - type this in the search box-> find COMMAND at the top and RIGHT CLICK – RUN AS ADMIN

  Enter this at the command prompt - sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  The log can give you the answer if there is a corrupted driver. (Says not all possible
  driver problems).

  Also run CheckDisk, so we cannot exclude as much as possible of the corruption.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  -------------------------------------------------------------------------

  Often drivers up-to-date will help, usually video, sound, network card (NIC), WiFi, part 3
  keyboard and mouse, as well as of other major device drivers.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  -------------------------------------------------------------------------

  How to fix BlueScreen (STOP) errors that cause Windows Vista to shut down or restart
  quit unexpectedly
  http://support.Microsoft.com/kb/958233

  Troubleshooting, STOP error blue screen Vista
  http://www.chicagotech.NET/Vista/vistabluescreen.htm

  Understanding and decoding BSOD (blue screen of death) Messages
  http://www.Taranfx.com/blog/?p=692

  Windows - troubleshooting blue screen errors
  http://KB.wisc.edu/page.php?id=7033

  -------------------------------------------------------------------------

  In some cases, it may be necessary.

  The Options or Vista recovery disk Startup Repair

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• Blue screen error: 0x0000001a when using system to restore with new hard drive disk

  original title: blue screen error when you use the system disk to restore with new hard drive

  I bought a new hard drive to my computer because the old one gave me a bunch of error messages on screen blues. I installed in the tower and tried to use my restore and system recovery disks that the manufacturer has given me, the process has got to the last disk then asked for the system once again restore disc, and then began to load the last steps and went to blue screen error. I don't know what to do, I mean it's a whole new drive hard, so where could the error come, theres nothing on the hard drive because I have not yet used really, yet. Help, please

  I have finally fixed the problem myself. The problem was that one of the sticks three memory was bad and the only way I could test this error. I took two sticks a left, used disks I had and was able to restore my computer, then I put a stick, turned on the computer, had no errors so I let him, so I put the last stick in and com immediately on, I had the Disconnections: memory management and that's when I knew that the last stick of memory was bad I took it back and now my computer works well and I can't buy more memory for not too. So if someone gets this BOSD error on memory, I'd say 8/10 computers have bad memory (not a number). If youcannot run the tool of diagnosis of memory like me then I would suggest to do what I did with the trial and error, it was the only way to understand the problem. Thanks for your help

• Get the blue screen Error Message: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys and Vista crashes

  Original title: crashing in Vista, something with the drivers I think

  At startup, I see a message that says: Media test failure.  I can sometimes to vista in normal mode, but then it's a matter of time (not too long usually) before the screen flickers and goes black.  I then turn off the power and restart.  Once it says graphics driver NVIDIA has stopped working properly, I've updated my driver and now it says it's working properly, but I still have the same problem.  My bucket of blue screen error is: 0x116_TdrBCR:2_Tdr:2_IMAGE_nvlddmkm.sys any help will be greatly appreciated

  Hi zambetti,.

  Bug VIDEO_TDR_ ERROR control has a value of 0 x 00000116. This error indicates that an attempt to reset display driver and recover a timeout failed.

  Check out the link:

  http://msdn.Microsoft.com/en-us/library/ff557263%28VS.85%29.aspx

  Since you've already tried to update the Nvidia drivers, you can try to uninstall and reinstall the same check.

  You can try to uninstall and reinstall all the programs and features Nvidia drivers and Device Manager.

  Step 1:

  Uninstall the audio drivers from programs and features

  a. click on start

  b. type appwiz.cpl in the start search

  c. search for all driver packages, Nvidia, right click and uninstall.

  Step 2:

  Uninstall the drivers from Device Manager.

  a. click on start

  b. type devmgmt.msc in search, and then press enter

  c. in find Manager device for the device, right-click on it and select the option uninstall.

  After you remove the drivers of these two places, you can try to remove the NVIDIA folder and restart to see if that solves the problem after I installed the generic drivers.

  Step 3:

  To delete the folder:

  one. Click on start and Type C:\windows\system32\drivers folder in start search

  b. click on drivers and select nvlddmkm.sys

  c. right click and rename nvlddmkm.sys in nvlddmkm.sys.old. or delete.

  d. restart the computer and check.

  You can also check the manufacturer's website and download the latest drivers from Nvidia:

  http://www.nvidia.com/download/index.aspx?lang=en-us

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Blue screen error crash, caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  original title: Blue error screen, accident of death caused by drivers: ntoskrnl.exe, Wdf01000.sys and tcpip.sys

  I currently own an Aura of Alienware Dell, it's an amazing computer. The only problem is that I had a lot of problems, I was able to permanently fix all except this issue. I'll randomly crash blue screen, usually it doesn't happen often and it is normally not triggered by something specific, rarely it will crash at startup. I was able to download an application that can read the cache/dump blue screen crashes:

  34 accidents

  one was caused by Wdf01000.sys

  three was a result of tcpip.sys

  and all the rest of ntoskrnl.exe

  I don't know what caused it, I've had this computer for about a year now and I've never had this problem before. I don't remember an update of the cause, or by downloading any strange apps, downloads or viruses. (I had wiped my computer about 3 months ago)

  I don't know too much about software,

  Any help is appreciated.

  Hi bloo532,

  1. what application did you use to read dump files?

  2. did you of recent changes on the computer?

  It resembles that of the driver on the computer is causing the blue screen.

  Check if the problem persists in safe mode.

  Start your computer in safe mode

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Restart the computer to return to normal mode

  Also make sure that all drivers are up to date on the computer.

  See the link below and try them the steps mentioned, check if it helps.

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

   

  If the previous step fails, then you will need to provide the minidump files.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• My computer crashes from time to time, and sometimes I have the blue screen errors.

  I am running Win 7 on a 2 years old HP Pavilion. I started having occasional blue screen errors, and some applications are a little weird. I haven't added anything recently except the recommended Windows updates. Now when I try to stop, it just display the closing, and I pressed the power switch. I tried to restore to an earlier time a few times in the last 90 days. Suggestions, or I need to reload Windows? If a reload is correct, can I charge for the recovery through my recovery cd partition?  My processor is an AMD Phenom 2.90 GB with 4 GB of ram, Win Home Premium software. Thank you... Joe

  I think that your problem is related to your wireless network connection.

  Send a copy of your dumpfile as a shared folder on your drive of sky with a link here.
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

  To get tips on how to configure your system to create dump files please read:
   http://support.Microsoft.com/kb/254649

  The dumpfile will be created in c:\windows\minidump. You may need to change your settings in Windows to be able to view the file. To show hidden files type Folder Options in the search box above the Start button and select view advanced settings and check that the box "display files and folders" and 'Hide protected operating system files' are not checked. You may need to scroll down to see the second element. You should also make sure that the box before "Hide extensions of known file types" is not checked.

  Please download and run the display driver and download a copy of the report he produced on your sky player
  http://www.NirSoft.NET/utils/DriverView.html

  Please download copies of your system logs and Application of your event viewer on your sky drive and post a link here.

  To access the system log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window select Windows and the system logs. Place the cursor on the system, select the Action in the Menu and record all events as and give the file a name. Do the same for the application log.

• MESSAGE-ACCIDENT-STOP IN A BLUE SCREEN ERROR. STOPS & RESTARTS CONTINUALLY. WORKS IN SAFE MODE. POSSIBLE SPYWARE WIN32/INFOAXE?

  the crash, blue screen, stop message-0_c0000005, 0_82627f3f, 0_a542991c, 0_a435f91c, 0_00000000.system stop & restart every time in normal mode.these all started after installing microsoft security essnentials.after that windows updates cannot download-display error message-0_80072efe ABORTED.after CONNECTION NETWORK scanning with windows defender spyware WIN32/infoaxe.remove shows all tool windows defender - succeeded.used tdskiller kaspersky to remove the spyware.after restart the system fails to load showing these in blue screen.previously stop message blue screen appeared on occations, but not constantly. Now is the case each time from windows.only can operate in security mode.give a solution for this.i tried several things start: repair, restoration of the system... etc nothing works.when open in restart mode disabled grubbing watch bluescreen stop message with bios check written above errors.also updates, disablwe memory bios options cache or shadowing.whats the solution for this.i uninstalled already expired anti-virus program norton before installing windows security essentials.pls give me some Tips to solve this problem

  I ran tdss killer - find spyware.to malicious delete everything happened for rebooting.system has crushed display blue screen with error messages.could not started at all in the normal mode.i tried several options but nothing has worked. SOLUTION finally solved this problem by reinstalling windows vista with the original product recovery disc.now it works.all started after downloading windows security essentials.after this windows automatic update stopped working.then I ran tdss killer and system crashed.now I purchased & installed internet security 2011 (kaspersky) .then yes gud. I think that reinstalling windows is the only solution to this message of the death of blue screen.

• After installing windows, there are a lot of blue screen errors

  Hello
  I just installed windows 7 ultimate. I've had computer problems for quite some time now. I tried a new operating system and I always get blue screen errors. These mistakes will be due to the lack of drivers (I have only installed 2 and everything that has been installed in the Service pack 1) or the malfunctioning of the equipment. Could you analyze these dump files and get back to me?

  Running on Windows 7 ultimate, 64-bit OS
  Toshiba with Intel processor

  Crash dump files are:

  http://rapidshare.com/files/1143482600/051213-32619-01.dmp%20-%20Shortcut.zip
  http://rapidshare.com/files/2723057529/051213-39437-01.dmp%20-%20Shortcut%20 (2) .zip
  http://rapidshare.com/files/1294305945/051213-39437-01.dmp%20-%20Shortcut.zip
  http://rapidshare.com/files/1739676114/051213-21918-01.dmp%20-%20Shortcut%20 (2) .zip

  Hello

  Thanks for posting your query in Microsoft Community!

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  Use SkyDrive download collected files and post screen shot/image

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• Blue screen error on the Satellite A100 - 920 (PSAA9)

  Hello

  I got a blue screen error during use normal and after reboot, Windows suggested updated the BIOS, so I've updated with the latest version (5.10). The next day, I got another blue screen and reboot, Windows has suggested that I update my display drivers, I did (to Ver. 8.241)... I have an ATI Radeon X 1400 GPUS. After that, the computer crashed every time that it loaded windows, with a popup on services.exe telling me the computer shuts off in 60 seconds.

  I assumed that this was linked to the display driver, so I replaced the drivers with a version earlier than day (8.241 - 034065C). Once I did, it seemed to work and I could use the computer very well for a bit, even play games like GTA, but I'm starting to take again the blue screens, usually just at the opening of the files, etc. and not when you run graphical applications with a lot. The problem disappeared when I turn off my display drivers, but which is not really a solution.
  I disabled the reboot on the parameter of the error and it is information of the blue screen of death:
  STOP: 0X0000008E (0XC0000005, 0XEE6DF5E9, 0XBAD2F99C, 0X00000000)
  System32:huy32.sys - address EE6DF5E9 base at EE6DD000, Datestamp 45abe717

  Anyone have an idea how I can solve this problem, it makes me crazy!
  I downloaded the map Omega drivers, but am slow to install that I heard that they can cause overheating and I think ATI/Toshiba should be able to provide me with a solution without having to use third-party drivers myself.

  Hello

  One question: do you use Antivirus applications and you did update the Windows operating system?
  You said something about services.exe you indicating the computer turns off in 60 seconds.

  For me, this looks like a virus! I also google for system32:huy32.sys some people said it s a malware!
  I m not 100% sure, but maybe you have some virus you OS!

  Now to the question of pilot you: Yes, Toshiba recommend that you use a clean graphics drivers on the Toshiba site. The use of original graphics drivers on the Web site of graphics card manufacturer is not recommended.
  But I read a lot of thread on the omega drivers and many users using the drivers and they have no problems.

• Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  I came to doday to find that a blue screen on my pc .This is the error number.

  Blue Screen error code RQL_Less_or_Equal stop: 0X0000000A, C0xE10039F0, 0x000000FF, 0x00000000, 0x8056CA2E

  Please provide additional information on your system:
  What is your system brand and model?
  What is your version of XP and Servie Pack?
  Describe your current antivirus and software anti malware situation: McAfee, Norton, Spybot, AVG, Avira!, Defender, ZoneAlarm, PC Tools, MSE, Comodo, etc..
  Click Start, run and enter in the box:
  Msinfo32
  Click on OK and when the system info summary appears, click on Edition, select all, copy, and then paste the information here.
  For information about video drivers, expand components, click view, click on edit, select all, copy and then paste the information here.
  There will be some personal information (such as the user name and the name of the system), and everything seems
  be personal information for you, just delete pasted information.
  This will minimize back Q & A and eliminate guesswork.
  Download BlueScreenView here:
  http://www.NirSoft.NET/utils/blue_screen_view.html
  Unzip it and run it (BSV installs nothing) and let him complete the digitization of all of your files to dump.
  If you double-click on depressed, you will get information on it (including the field caused by the driver) and you should be able to spot the problem right away - especially if you see a model in landfills where Caused by field pilot is the same (beginning with this driver).
  Select (highlight) one or more of the most recent dump files by clicking on them and hold down the CTRL key to select multiple files.  Try to select only the most recent links that relate to your problem (perhaps five or six to start dump files).
  Click on file, save selected items and save information from the dumps to a text file on your desktop called BSOD.txt.  Open BSOD.txt with a text editor, copy the text and paste it in your next reply.
  Here's an example of report ASB to a single BSOD I initiated on purpose that indicates the cause of the accident as the pilot i8042prt.sys belonging to Microsoft Corporation:
  ==================================================
  Dump file: Mini062110 - 01.dmp
  Crash time: 21/06/2010-11:51:31
  Bug Check String: MANUALLY_INITIATED_CRASH
  Bug check code: 0x000000e2
  Parameter 1: 0x00000000
  Parameter 2: 0x00000000
  Parameter 3: 0x00000000
  Parameter 4: 0x00000000
  Caused by the driver: i8042prt.sys
  Caused by the address: i8042prt.sys + 27fb
  Description of the file: i8042 Port driver
  Product name: Microsoft® Windows® Operating System
  Company: Microsoft Corporation
  File version: 5.1.2600.5512 (xpsp.080413 - 2108)
  Processor: 32-bit
  Computer name:
  Full path: C:\WINDOWS\minidump\Mini062110-01.dmp
  ==================================================
  Send information from 5 last memory dumps.
  While you wait for analysis, no matter what you use for protection against malware, please follow these steps:
  Download, install, update and do a full scan with these free malware detection programs:
  Malwarebytes (MMFA): http://malwarebytes.org/
  SUPERAntiSpyware: (SAS): http://www.superantispyware.com/
  It can be uninstalled later if you wish.

  Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!