several validations causing performance problems in forms?

Similar Questions

• a defective battery in a tablet will cause performance problems of speed

  a defective battery in a tablet will cause a matter of output speed

  Hello

  Sometimes it can cause a performance problem, visit the following link to monitor how to take care of the battery:

  Taking care of your laptop battery

  http://Windows.Microsoft.com/en-us/Windows7/taking-care-of-your-laptop-battery

  In order to increase the performance of Windows XP please visit the link below:

  Windows XP performance

  http://TechNet.Microsoft.com/en-us/library/bb457057.aspx

  Reference: PC slow? Optimize your computer for peak performance

  http://www.Microsoft.com/athome/Setup/optimize.aspx

  Note: as long, the Tablet is connected to a power source it shouldn't affect the performance in itself. However, bad battery itself a performance problem.

• VMDK + instant cause performance problems?

  Can think VMDK w / snapshots causing problems of performance by any chance?

  I'm on vSphere 4.1 (esxi)

  vmchr1s wrote:

  Can think VMDK w / snapshots causing problems of performance by any chance?

  I'm on vSphere 4.1 (esxi)

  Yes and no.

  Let's say you have VM - 1.  VM-1-snp (snapshot)

  If you have a database running on a virtual machine, and you create a snapshot, the data is READ in VM - 1.vmdk and WRITES to VM - 1 - snp.vmdk but databases need an AREA of IO, so go back and fourth could cause a problem.

  Otherwise performance is not normally a problem with the shots... space is the issue, and the time to commit data is the biggest problem, because your discs/SAN will take a major during the snapshot delete / validate the data.

• Help me. Will be the Trigger below cause performance problem?

  Experts,
  
  I'm Mohanasundar, senior Software engineer, Antares limited systems. We use oracle for our product. 16 years one of our capture of audit trail table (* LOGTABLE *) do not have a primary key column. If we write at the same time more than one journal to LOGTABLE, the column was even, due to which order of this column wasn't properly.
  
  To avoid this, we have added the trigger of bellows for LOGTABLE.
  
  CREATE OR REPLACE TRIGGER TR_PK_ATTACH_TBL+.
  BEFORE INSERT ON ATTACH_TABLE FOR EACH LINE.
  DECLARE A1 NUMBER +
  START to+.
  * SELECT LOGTABLE_SEQ. NEXTVAL IN A1 FROM DUAL; *
  *: NEW.LT_INDEX: = A1; *
  END; +
  
  LT_INDEX Here are the newly added primary key column.
  LOGTABLE_SEQ is an oracle sequence.
  
  This table contains about 10 million documents.
  Initially we updated the sequence for the LT_INDEX column to existing records.
  
  Details of our server:
  
  OS: windows Server2008 R2
  Web server: Apache Tomcat 6.35
  Oracle: 11G
  
  The problem is,
  
  "* We made this change to the production for the last version (this month)." "Our teams COMPUTER, reports that after this change, the site is too slow (Server Web is in place, but the answer is too slow)."
  
  Will this trigger slow the performance of oracle db? *
  
  Please help us, our eight month project is literally dependent on this key.
  
  Thank you
  Mohanasundar.n

  Relaxation itself I do not introduce overhead costs have a significant impact on performance, and I can see why you would use an approach to relaxation based during the redevelopment of this on an existing system.
  Could really do with some stats here, an AWR report on a busy to begin with.

  But I'll take a guess - could be contention on the right-hand side of the index, a hot block as all these inserts are consecutive values are inserted.
  A reverse key index could (maybe with the emphasis on the word!) help here.

• What is XP Anti Spyware 2011, causing performance problems in XP

  What is the anti-spyware XP 2011? My computer bascially closed and would not allow me to do something and when I tried to search on the internet it would just continue to flow to the top on the xp anti spyware 2011 and that my computer has been attacked. I had microsoft security essentails downloaded but which seemed to have disappeared. Please tell me that this isn't a virus or a bad thing because I had no other choice than to buy this product. I couldn't look again on this subject, the computer kept blocking me to do anything. Since I bought it, it seems to work ok but I am always a little leary about what happened. Help, please

  Hello

  This malware has many names and XP Antispyware 2011 is one of them.
  
  Vista Antimalware 2011 and Win 7 Antispyware 2011 change of name are fake antivirus,
  a scam for you force to pay for them while they have no advantage at all.

  Remove Vista Antimalware 2011 and Win 7 Antispyware 2011 changing name of the thugs (Uninstall
  Guide)<-- read="" this="">
  http://www.bleepingcomputer.com/virus-removal/remove-win-7-AntiSpyware-2011

  How to remove Vista Antispyware 2011 virus/malware<-- read="" this="">
  http://www.myantispyware.com/2010/11/17/how-to-remove-Vista-AntiSpyware-2011-virusmalware/

  It can be made repeatedly in Mode safe - F8 tap that you start, however, you must also run
  the regular windows when you can.

  Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone. (If Rootkits run UnHackMe)

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Malwarebytes - free
  http://www.Malwarebytes.org/

  Run the malware removal tool from Microsoft

  Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.

  You should get this tool and its updates via Windows updates - if necessary, you can download it here.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
  (Then run MRT as shown above.)

  Microsoft Malicious - 32-bit removal tool
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=en

  Microsoft Malicious removal tool - 64 bit
  http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=en

  also install Prevx to be sure that it is all gone.

  Download - SAVE - go to where you put it-right on - click RUN AS ADMIN

  Prevx - Home - free - small, fast, exceptional CLOUD protection, working with other security programs. It comes
  a scan only, VERY EFFICIENT, if it finds something to come back here or use Google to see how to remove.
  http://www.prevx.com/   <-->
  http://info.prevx.com/downloadcsi.asp  <-->

  Choice of PCmag editor - Prevx-
  http://www.PCMag.com/Article2/0, 2817,2346862,00.asp

  Try the demo version of Hitman Pro:

  Hitman Pro is a second scanner reviews, designed to save your computer from malicious software (viruses, Trojans,
  Rootkits, etc.) that has infected your computer despite all the security measures that you have taken (such as
  the anti-virus software, firewall, etc.).
  http://www.SurfRight.nl/en/hitmanpro

  --------------------------------------------------------

  If necessary here are some free online scanners to help the

  http://www.eset.com/onlinescan/

  New Vista and Windows 7 version
  http://OneCare.live.com/site/en-us/Center/whatsnew.htm

  Original version
  http://OneCare.live.com/site/en-us/default.htm

  http://www.Kaspersky.com/virusscanner

  Other tests free online
  http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1

  --------------------------------------------------------

  Also do to the General corruption of cleaning and repair/replace damaged/missing system files.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  RUN--> Enter this at the prompt:

  sfc/scannow

  Run checkdisk - schedule it to run at the next startup, then apply OK then restart your way.

  Chkdsk /f /r
  -----------------------------------------------------------------------

  If we find Rootkits use this thread and other suggestions. (Run UnHackMe)

  http://social.answers.Microsoft.com/forums/en-us/InternetExplorer/thread/a8f665f0-C793-441A-a5b9-54b7e1e7a5a4/

  I hope this helps.

• Running Windows Defender and McAfee at the same time will cause performance problems?

  Will be running Windows Defender and McAfee Antivirus at the same time slow down my laptop, and it is necessary to run both at the same time.  I have windows vista.

  Hello

  McAfee is normally disable windows defender

  read this information on the Defender:

  ·                         If you use microsoft security essentials avg avira mcafee norton etc they disable the vista version of windows defender by default

  the basics of Microsoft security has its own version of windows defender

  and other anti-virus programs use their own particular type of application to scan for spyware and malware

  It of nothing to worry and is the default action, which is designed for them to do

  If the above does not apply to your machine to read the information on the below link on how to disable the windows defender service in vista or make an autostart to enable

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-service-in-Windows-Server-2008-or-Vista/

  and here is the method to remove it from startup in vista

  http://www.groovypost.com/HOWTO/Microsoft/Vista/remove-Windows-Defender-from-Vista-system-startup/

  and this is how you would normally activate or disable windows defender in vista from within defenders of own and options tools

  http://www.groovypost.com/HOWTO/Microsoft/Vista/disable-Windows-Defender-for-Microsoft-Vista/

       and read this information to microsoft:

  Error message when you run Windows Defender: «Error 0x800106ba»

  http://support.Microsoft.com/kb/931849

  and if you need to change startup programs read this information on the other methods of doing it without using defender

  using msconfig read this tutorial;

  How to use MSCONFIG in Windows Vista

  Here's how to use MSCONFIG in Windows Vista to disable some unnecessary programs that load automatically at startup

  http://netsquirrel.com/Msconfig/msconfig_vista.html

  and also try this program;

  This utility, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services more

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

  for a good anti-malware program try this FREE

  Download update and scan with the free malwarebytes anti-malware version

  http://www.Malwarebytes.org/MBAM.php

• upgrade 9i Sql performance problems, 10 g

  I've heard several times sql performance problem if db upgrade, what is his fix, this problem SQLs appear in ADDM report with Advisor tunning/access sql to run & its suggestions bugs?

  PL see MOS Doc 466181.1 (10 g companion Upgrade) - this topic is covered in this document

  HTH
  Srini

• Page ads TitanTV affects NOW my Firefox. I usually go there - several tabs - without any problems at all. Now - suspended. Flash crash, etc... What comes to change?

  (With WiFi and all - library computers, etc...) I had the habit of maintaining several tabs open. I've come to Firefox, since it managed this use much, much better than any version of Internet Explore. Running multiple tabs from the list television future, made sense and was very convenient... A. it seems now - after eliminating the other possibilities * page TitanTV is the cause of my Firefox suspended... (when it is open to all, it slows down even more pages of scrolling..?) So yes--"suspended", on which page, flash/shockwave - type accidents etc. etc. Obviously... I don't have to use the page... or run on this browser, but ALL Of A sudden what originally do this? What is the content of the ad on there somehow? I would like to know at this point... and I prefer it to other browsers. [* And comply with the posted helps out usual as well as uninstall/reinstall Firefox and antivirus (Avast), clear memory cache...] I wish if I could solve this new mystery here... Thank you! )

  (1) can you try to start Firefox in Mode safe to see if Firefox works correctly without error? You can start Firefox in Mode safe below:

  • Windows/Mac: choose Help > restart with disabled modules
  • Linux: run firefox-safe-mode in the Terminal/Konsole

  If Firefox opens fine with no problems, it is probably one of your extensions that is causing the problem. You can reactivate your modules one by one until you find the one that is causing the problem to be re-activated.

  Some problems with Flash video playback can be resolved by disabling hardware acceleration in Flash Player settings. (See this article for more information on using the Flash plugin in Firefox).

  To turn off hardware acceleration in Flash Player:

  1. Go to the Adobe Flash Player help page.
  2. Right-click on the Flash Player logo on this page.
  3. Click settings on the shortcut menu. The Adobe Flash Player settings screen opens.
  4. Click the icon in the lower left of the Adobe Flash Player settings window to open the display panel.
     
     

     

  5. Remove the enable hardware accelerationcheck box.
  6. Click close to close the Adobe Flash Player settings window.
  7. Restart Firefox.

  This Flash Player help - display settings page contains more information about the Flash Player hardware acceleration, if you are interested.

• Satellite L40-139: new graphics driver is causing the problem after waking from sleep

  I have a three month old Toshiba Satellite L40-139 (PSL40E) with 1 GB of RAM with Microsoft Windows Vista Home Premium pre-installed. This laptop worked very well for me for the basic headquarters far tasks, and I would have no problem recommending.

  In the last days I've updated the software and drivers from the Microsoft Update web site.

  Since the update driver Mobile Intel(r) 945 Express Chipset Family (to version 7.14.10.1350, dated October 18, 2007), the screen resolution at 800 x 600 after awakening from the sleep state. The only way I found to fix it is to restart the PC.

  Other articles published on the web, I understand that this particular driver (Mobile Intel(r) 945 Express Chipset Family driver 7.14.10.1350 version) has caused many other problems on a variety of hardware and software platforms.

  Does anyone have a definitive solution for Satellite L40?

  I looked at four options.

  1. let the new installed driver and restart Windows each time after waking up from sleep mode. Rather, I must not do this.

  2. using the Restore Point created by Windows Update before the update of the driver, roll back to an earlier time. This seems to be a good course if it works.

  3 download an older version of the driver and reinstall it. I don't know which version would work but note that others have had success with the 7.14.10.1280 version. I guess a similar version could be included in the driver Package that can be downloaded from Toshiba Europe site, but have heard that the time required to download this software can exceed ten hours and am therefore reluctant to try.

  4. the fourth option is not really possible. I should be able to "Roll-Back" the driver in Device Manager, but the button is disabled.

  Although only a minor problem, it is very irritating and I would like to address them without causing other problems. Does anyone else have this problem? Someone has fixed it successfully?

  Hello Peter

  If I understand correctly, you use your usual laptop for daily work and you don't need any computer high-performance notebook. If I'm right I have to say that you should be happy if the laptop works well and stable.

  I don't really see any reason why you wanted to update chipset driver. In any case, you should try to roll back the BONES of time earlier and I hope everything will work again. There is absolutely no risk, and you can test it.

  Please post the result.

• Cannot determine or find out whether there are well on my system that may be predefined, causing access problems

  On Windows 2000 Professional SP4 o/s with IE 6, I am trying to locate any firewall, which can be on my system.  So far, I found none. I have not installed some.  I looked for answers on Microsoft.com (re: Windows XP has a built-in built in firewall is not enabled by default), but no information on Win2000Pro presenting one like that. Before the firewall issue, I thought that it may have been a virus or an anti-virus running program, causing a problem.  My pc is virus-free and I'm not now running an anti-virus program.  I have reset temporarily lower than usual security levels, but it was not the cure.  In addition, to exclude from spyware and adware.  Don't have these installed or running.  I'm currently not in a corporate network or home.  It's just a pc.  I can't get the game online, I want to play to load completely.  My Java is up to date and works fine without pop - ads or blockers interfere. (I ran the Java which tests and is ok) The support for the suggested site care service that I am behind a firewall.  How can I know for sure if this is what is happening with my pc?  Is it possible that there is an internet firewall also?  Can I play other games on this site with little or no problem, which suggests that it is a problem on their end? Also, I have run a performance scan, active disk defragmentation, no file corrupted, run Registry clean, run Disk Cleanup of the files of the irrational, ran chkdsk/f during reboot and no problem found, deleted IE temporary file browser and erasing temporary files Java.  In addition, my o/s and IE browser is supported by their system.  So now what?  I am open to suggestions and any help is appreciated.  Thank you.

  Hello Precious1,

  Thank you for visiting the website of Microsoft Windows Vista Community.

  Try the rest of the stage in this article:

  Desktop operating systems	General availability date	Direct OEM and retail license availability (end date)	Availability of the license generator system (end date)
  Windows 2000 Professional	March 31, 2000	March 31, 2004	March 31, 2005

  The pasted list of http://www.microsoft.com/windows/lifecycle/default.mspx>

  I suggest take you computer to a shop for assistance.

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have several questions about performance in XP that I asked about

  I have maybe something to do with my pc which has caused several issues that I have been asking questions on this site and have yet to get solved. Maybe it's a matter of slow internet access or an intermittent problem of internet access or a busy RAM which caused these problems for me:

  • 7 + 1 end Nows to Log Off or restart
  • IE cannot display the website (goes and load when I click Refresh!)
  • Enter the network password
  • Scrolling mouse (sometimes) when I click on a link in an e-mail or on a website or open a new tab opens to the blank page
  • Yahoo Messenger which is set to autostart in the Journal, sometimes impossible to display the weather plugin and so I just click on the v Options above and select Reset to Default height and it then displays to fill this place and it is currently running. What can I do to speed up my slow sometimes Tablet?
  • What can I do to speed up my slow sometimes Tablet?

  My Internet Explorer works fine, almost all the time and only question #2 or #4 occasionally and not very often. I need to put right at the front here saying that this isn't a malware problem and it is not a lack of program updates. If you could help me with this, just read my profile since these two are discussed in depth in my profile. I recently did a clean install and I visit unwanted websites on the internet and not much at all and I have installed Security Essentials immediately and it updates every day on its own. Also, I've updated all my programs and drivers manually and my operating system as much as possible by using Windows Update in custom update high priority mode (optional) software & hardware (optional). And I use File Hippo at each connection to find updates of programs that are available and I used another program to search for driver updates.

  I was unable to find information about malicious programs in your profile. Malware is STILL a possibility. ALWAYS. You run MBAM?

  Must you Yahoo Messenger runs at startup? (I doubt it). Plug-ins are also known to cause problems. If your plugin weather might be screwing things up.

  You have never set up a clean boot?

  Finally, you should never connect, I pointed out repeatedly. Reset must be a rare event, too.

• WRT54GS - wireless performance problem

  Dear someone

  I am currently having performance problems with my WRT54GSv1.1

  Just received my new internet connection to 30Mbit. Unfortunately, I am not able to download at that speed. If I connect via one of the linksys router's ethernet ports, I'm a happy person, but using the wireless makes me a little less happy.

  Wireless: 15Mbit/s

  Through the cable: 27Mbit/s

  Network information:

  The distance between the router and the computer laptop 3-4 meters

  Linksys WRT54GSv1.1 - Firmware Version: v4.71.4

  Network wireless - g only mode

  TV - 6 (because all the surrounding neighbor use 10-11, I noticed using Cain Abel & wireless discovered 4.9.29)

  Security: WPA2-Personal (TKIP + AES)

  All other settings are default (just reset to the factory settings).

  Laptop:

  Windows Vista Business SP1 32-bit

  Intel PRO/Wireless 3945ABG (installed the latest drivers from the website of intel, default settings)

  When you check the diagnostic of Intel tools, it tells me the link is 54 megabits and pushes meter packages of 54 megabits, while all lower speeds remain the same.

  More diagnostic information:

  Percent missed beacons: 0

  Percent transmit errors: 18

  Current Tx power: ~ 32 mW (100%)

  Supported power levels: 1.0 mW - 32.0 mW.

  Hope someone can help me here.

  Thanks in advance!

  Kind regards

  Ski Klesman

  Although wireless g "connects" to 54 Mbit/s, the maximum possible wireless "data rate" (in ideal laboratory conditions) is only about 20 to 25 Mbit/s.  Unfortunately, the phrase "in ideal laboratory conditions" generally excludes home intrusion!

  The aerial transmission for wireless connections is higher than for wired connections.   Thus, most individuals find that their Wi - Fi connection works at 50% to 70% of their speed of wired (LAN).  Your wired LAN being 27 Mbps connection speed, your 15 Mbps wireless speed is within normal limits.

  You might be able to tweak a bit more speed from your wireless network by optimizing all your wireless settings.  Here are a few suggestions:

  I guess you want actually to WPA2 encryption.  If so, set to AES only.   When you set the router to TKIP and AES, you actually tell the router to accept a WPA or WPA2 connection.

  Also, give your network a unique SSID. Do not use "linksys". If you use "linksys", you can try to connect the router to your neighbor. Also set 'SSID Broadcast' to 'active '. This will help your computer to find and lock on the signal from your router.

  Bad wireless connections are often caused by interference from other 2.4 GHz devices. This includes cordless phones, baby monitor wireless, microwave ovens, wireless mice and keyboards, wireless speakers and wireless network from your neighbor. In rare cases, Bluetooth devices can interfere. Even some 5 + GHz phones also use the 2.4 Ghz band. disconnect these devices and see if that solves your problem.

  In your router, try another channel. There are 11 channels in the band of 2.4 GHz channel 1, 6 or 11 generally works better. Discover your neighbors and see what channel they use. Because the channels overlap, try to stay at least + 5 or - 5 channels of your more powerful neighbors. For example, if you have a powerful neighbour on channel 9, try any channel 1 to 4.

  Also, try putting the router about 4 to 6 feet above the ground in an open area. Do not place behind your screen or other computer equipment or speakers. The antenna must be vertical.

  In addition, in the computer, go to your wireless software and go to 'Favorite networks' (sometimes called 'Profiles'). There are probably a few listed networks. Remove any network called "linksys". Also remove any network that you don't recognize or that you no longer use. If your current network is not listed, enter its information (SSID, encryption (if any) and key (if any)). Select your current network and make your network by default, then set it to auto login. You may need to go to 'settings' to do this, or you may need to right click on your network and select 'Properties' or 'settings '.

  If you continue to have problems, try the following:

  For wireless g routers, try setting the "baud rate" at 54 Mbps.

  If you still have problems, download and install the latest firmware for your router. After an update of the firmware, you must reset the default router, and then configure the router again from scratch. If you have saved a router configuration file, DO NOT use it.

  I hope this helps.

• Do pop ups: update of Kaspersky Anti-virus and Unspecified changes to CONFIG SYS may have caused the problem after an unexpected shutdown and attempt to restore the system.

  Original title: unable to system restore

  After the unexpected stop down and try the system restore.  I got up a window pops that says update my KASPERSKY anti-virus program, I do not have KASPERSKY.    Another said unspecified changes "caudate root found" SYS CONFIG window may have caused the problem.   Any ideas?  I have Vista and Trend Micro Internet security

  Hi JevenStulie,

  1. are you able to boot into normal mode after receiving these error messages?

  You can try these steps and see if it helps.

  Step 1:

  You can check if the problem occurs in safe mode with network.

  Start your computer in safe mode

  Startup options (including safe mode)

  Step 2:

  If you do not experience the problem in safe mode with network, then you can read the following article to download the Microsoft Safety Scanner and analysis complete on your computer.

  Microsoft safety scanner

  Note: When you perform the analysis, there are chances of losing the data that you can take a backup of important data before performing analysis.

  Hope this information is useful.

• Update KB2416473 many causes of problems

  After installing .NET 3.5 updated KB2416473 on my Vista Home Pro, I have a lot of problems:

  • Windows Media Center does not display TV program and does not update.
  • The event log viewer cannot start with the error message could not initialize a snap
  • (Computerverwaltung in German) computer management fails to start with the error message that he couldn't start a snap.
  • The sceduler of employment in the control panel may not start with an error message about problems with a snap.
  • All tasks in the background of all of the programs are obviously not performed more.

  With the help of a fresh new install of Windows and repeat all updates installed, the problem repeated. I discovered that exactly KB2416473 causes this problem. The problem goes away, when I restore the update.

  Hi StefanFrings,

  It seems that net Framework is damaged or does not properly.

  You can use the tool-.NET Framework Cleanup to remove all versions of the .NET Framework is installed. For more information, follow this link.

  When you try to install an update for .NET Framework 1.0, 1.1, 2.0, 3.0 or 3.5, you may receive Windows Update '0 x 643' error code or error code Windows install "1603".

  (b) subsequently, you can follow the link above to reinstall .NET Framework on your computer and check if the problem persists.

  Hope the helps of information.

  Please post back and we do know.

• 4.2 APEX performance problem

  Hi all

  We are facing the problem of performance when we are by selecting one of the underside of responsibility that rests in the Organization as if we select APEX_01 Reporting ALL then in this case, we can see all the organization such as ETL, BRN, CHICKEN ect in home page, but I am facing performance problem when it forms that select area of responsibility to the home page. Please indicate how to check this page's performance in the APEX and also advise how to solve this problem.

  

  LnTInfotech wrote:

  so you want to say below takes more time and we need to address this request?

  15.34901

  224.01663

  ... Run the statement: SELECT DISTINCT papf.full_name a, papf.full_name b OF po_agents pa per_all_people_f women's wear org_organization_definitions org WHERE 1 = 1 AND papf.person_id = pa.agent_id AND org.organization_CODE = NVL(:P1_WARE_HOUSE,org.organization_CODE) AND TRUNC (SYSDATE) BETWEEN papf.effective_start_date AND papf.effective_end_date AND EXISTS SELECT (SEPARATE 1 OF po_headers_all poh WHERE poh.agent_id = pa.agent_id AND poh.org_id = org.operating_unit)

  This request seems to be missing a join. An obligation to use DISTINCT in application code usually indicates that there is something seriously wrong with the data model or query...