SFC/SCANNOW couldn't solve errors

Similar Questions

• SFC/scannow does not correct errors in 64-bit Windows 8

  I updated my installation of 64-bit Windows 8 because my laptop started to become unresponsive when market overnight (requiring a reboot) and sfc/scannow detected errors but could not fix the

  The problem is sfc/scannow has detected errors in the new installation (which is a custom refresh image) and cannot be resolved between them.

  What can I do from here to correct errors?

  Thanks in advance

  The next and sfc/scannow command is now ok

  DISM / Online/Cleanup-Image /RestoreHealth

• I went through the process of the sfc/scannow and got these errors.

  2012-06-07 10:09:45, CSI Info 000001 d 8 [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "
  2012-06-07 10:09:45, 000001da CSI Info [SR] cannot repair the military record [l:24 {12}] "settings.ini" Microsoft-Windows-Sidebar, Version = 6.0.6002.18005, pA = PROCESSOR_ARCHITECTURE_INTEL (0), Culture neutral, VersionScope = 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, type neutral, TypeName neutral, neutral to the public key in the store, hash mismatch "

  I can confirm that it can be ignored.

• Is there a MS, preferably, or an alternative to a ' SFC/scannow: finds corrupted files?

  Is there a MS, preferably, or an alternative to a ' SFC/scannow: finds corrupted files "error when parsing the SFC ends?

  W7, ie11, Intel Pent 4 - 3.00

  Of course, a repair installation is needed, AS in SAY THE MANY SUGGESTIONS below, with it REQUIRING the task long and arduous the resettlement of more than 100 to perhaps more than 200 updates, then put it back some or all of the programs...  IT USUALLY TAKES THE BETTER PART OF 2 DAYS OR MORE.  For some corrupt system files.  There is no reason that the files cannot be simply installed without all this.

  WE HAVE COMPUTERS TO SIMPLIFY AND AUTOMATE THE WORK OF PR PRODUCTS AND LONG.

  THIS MESSAGE'S ADDRESS DIRECTLY TO MICROSOFT: THERE'S A SERIOUS FLAW IN MS - W7: ESTABLISH A FIX.

  IT IS THE KIND OF PROBLEM THAT IS PERVASIVE AND RECURRENT, WHICH SHOULD NOT BE BOUNCING AROUND THE FORUMS AND TECH SUPPORT OFFICES, BUT, RATHER, SHOULD BE IMMEDIATELY HIGH MS-ADVANCED TECHNICAL SUPPORT, SO THAT A COMPLETE SOLUTION, SPECIFIC, SIMPLIFIED AND PERMANENT BENCH.   AS IT IS, I HAVE RE-INSTALLED AT LEAST 3 TIMES IN THE LAST 9 MONTHS, WHAT A WASTE OF TIME, ENERGY AND RIDICULOUS DISTRACTION.

  NOTE TO MICROSOFT TECHNICAL SUPPORT: RE-INSTALL WINDOWS IS NOT A SOLUTION, IT IS A LAST RESORT, SHOULD BE REQUIRED FOR THE FEW AND NOT RECURRING PROBLEMS/ERRORS.

  I WOULD LIKE TO KNOW WHEN A FIX IS READY, THANK YOU IN ADVANCE.

  Hello

  Windows updates must be checked and reinstalled again.

  http://www.SevenForums.com/tutorials/3413-repair-install.html

  THE ELEMENTS THAT WILL BE RESET TO DEFAULT OR AFFECTED:

  • Sounds
  • Services
  • Visual effects settings
  • Devices - drivers Be sure to have these practice to reinstall. They don't always stay after the installation of repair (upgrade).
  • You may lose the opportunity to sign a session in MSN Messenger, to solve this problem have a look at this thread, unable to connect to WLM.
  • You may lose your custom themes because no permisions on the old themes. Go to the folder themes hidden at C:/Users /(User-Name)/AppData/Local/Microsoft/Windows/Themes, then take possession of the themes folder and you have now all your themes back.
  • It has been reported that you can also lose your Media Center gadget after doing the repair facility.
  • Windows updates must be checked and reinstalled again.

  See you soon.

• Error 80070490 continues. Fix - It of MS, analysis system, sfc/scannow tool and more do not help. Please can you help me walk me through this WITHOUT formatting and starting over?

  Error 80070490 continues.  Fix - It of MS, analysis system, sfc/scannow tool and more do not help.
  I can't use the Windows installation CD because the 'upgrade' option is NOT available!
  Seems like everything is against me trying to find a way to solve this error.  I have run these scans,... rebooted several times and no luck.   Spin on a startup select too trying to solve probs.  I use MS Security Essentials that updates automatically. : (Had this problem 6 months ago and email support walked me through to solve.)  However, the link to that support is no longer available.   I would LOVE it if MS Fix - It really solve problems WU, but not for me and it looks like a lot of people posting here have the same chance.

  Running Windows Vista Home Edition with SP 1 and SP 2.   All Windows updates are automatic until almost a month ago.

  Microsoft Security Essentials auto updates, scheduled full scans.  Scanned for malware and some found and removed.
  All MS site suggested I have try, I tried.  Fix, it doesn't do a thing.
  HELP :)

  Please refer to this post by another user:
  http://answers.Microsoft.com/en-us/Windows/Forum/windows_other-windows_update/code-error-80070490-checking-for-Windows-updates/4e8d0b9c-267f-46fa-9963-ea344ec886e1

  I hope this link helps and good luck Toni J...

• Windows 7 troubleshooting error 0x8E5E0247 after running sfc/scannow

  I'm having this problem of solving the problems of network connection. I ran sfc/scannow, and the results are that Windows Resource Protection finds corrupted files but was unable to fix. What should I do now?

  Hello

  Don't forget to run checkdisk so

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =====================================================

  The errors may not have something to do with the problem you are experiencing:

  Check the Option 2 here:

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228 and http://support.microsoft.com/kb/929833

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read that the journal/txt files easier if you right click on Notepad or Wordpad and then RUN AS ADMIN-
  then you can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs)
  According to the needs. (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

• Weird error display and SFC/scannow default task manager - windows 7

  My laptop had a power failure last night and it took me a day to get this operational return.
  After that the accident happened I couldn't run a sfc/scannow until after I ran a chkdsk/r.

  As soon as I got it upward and runs windows updates is now Manager tasks shows strange Asian symbols under the user part in the process tabs.
  And when I'm doing a sfc/scannow, it tells me there were errors recorded so here is my log

  https://DL.dropbox.com/u/19577155/CBS.log

  I say now that do a repair installation isn't an option, I would like to consider, my key is not useful, as well, too many activations due to reinstallation of windows 7 and more, and as I understand it, a repair installation requires reactivation

  Hello

  I recommend you to run the system restore and check with the question.

  System restore

  http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore

  Note: If you have installed an application after the date to which you are restoring, you will need to reinstall these applications

  Hope this helps!

• Violation of Windows 8 sfc/scannow, cannot correct, virus, how to solve?

  Morning,

  A laptop with Windows 8 was no protection against the virus for months. I finally installed a free promo version, there are 0 viruses, but the CPU runs continuously from 40 to 90 percent. The laptop is relatively new. I ran sfc/scannow, and there the violations which does not correct. I read how to take ownership of the files to try to correct, but did not have the files I think are in error says no path of the file was found when I try to take ownership in cmd. I would like to just pure install Windows 8 to new, but do not have the CD. The CBS from the analysis is huge, but it included many

  "Ignoring duplicate for directory... property." »

  a few "[DIRSD caveat] directory...» »

  and ends with:

  2015-04-05 19:12:01, CSI Info 0000087b Verify [SR] full
  2015-04-05 19:12:01, components repair 1 CSI Info 0000087 c [SR]
  2015-04-05 19:12:01, Info CSI 0000087 d [SR] beginning verify and repair transaction
  2015-04-05 19:12:03, Info CSI 0000087e hashes of file Member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530. PBO is not actual file [l:36 {18}] "Amd64\CNBJ2530. PBO:
  Found: {l:32 b:8I6777zGdQu3F + hGb3pbteLl4Ky4mJ8VjM0xZYBdC5E =} expected: {l:32 = b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw}
  2015-04-05 19:12:03, CSI 0000087f [SR] cannot repair the military record Info [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2015-04-05 19:12:05, info CSI 00000880 Member \SystemRoot\WinSxS\amd64_prncacla.inf_31bf3856ad364e35_6.3.9600.16384_none_9590ba64d5b91f79\Amd64\CNBJ2530 file hashes. PBO is not actual file [l:36 {18}] "Amd64\CNBJ2530. PBO:
  Found: {l:32 b:8I6777zGdQu3F + hGb3pbteLl4Ky4mJ8VjM0xZYBdC5E =} expected: {l:32 = b:n520k714Uu3utHa5JGQ6HQYbZphKhlMWq5pEmfnCDuw}
  2015-04-05 19:12:05, info CSI 00000881 [SR] cannot repair the military record [l:36 {18}] "Amd64\CNBJ2530. PBO"prncacla.inf, Version = 6.3.9600.16384, pA = PROCESSOR_ARCHITECTURE_AMD64 (9), the Culture neutral, VersionScope is 1 nonSxS, PublicKeyToken = {l:8 b:31bf3856ad364e35}, Type = [l:24 {12}]"driverUpdate", TypeName neutral, PublicKey neutral in the store, hash mismatch
  2015-04-05 19:12:05, info CSI 00000882 [SR] this element is referenced by [l:186 {93}] "Microsoft-Windows-printer-drivers-package ~ 31bf3856ad364e35 ~ amd64 ~ ~ 6.3.9600.16384.INF_prncacla '.
  2015 04-05 19:12:05, info CSI 00000883 [SR] repair complete
  2015-04-05 19:12:05, info CSI 00000884 [SR] validation of transaction
  2015-04-05 19:12:05, info CSI 00000885 NT seq transaction creation (2), objectname [6] "(null) '"
  2015-04-05 19:12:05, result of transactions (seq 2) Info CSI 00000886 created NT 0x00000000, manage @0 x 1398
  2015-04-05 19:12:05, validation of transaction start NT CSI Info 00000887@2015/4/5:23:12:05.749...
  2015-04-05 19:12:05, Info CSI 00000888@2015/4/5:23:12:05.936 CSI perf trace:
  CSIPERF:TXCOMMIT; 243285
  2015 04-05 19:12:05, info CSI 00000889 [SR] check and complete repair operation. All of the files and registry keys listed in this operation were repaired successfully
  2015-04-05 19:14:14, CBS of information trusted installer stops because: SHUTDOWN_REASON_AUTOSTOP
  2015-04-05 19:14:14, CBS reported for stop, TiWorker info up to the exit.
  2015-04-05 19:14:14, info CBS ending the main loop of TiWorker.
  2015-04-05 19:14:14, finalization of CBS information from TiWorker.
  2015-04-05 19:14:14, info CBS ending the main loop of TrustedInstaller.
  2015-04-05 19:14:14, finalization of information CBS from TrustedInstaller.
  2015-04-05 19:14:14, finalization of information CBS ending TrustedInstaller.
  2015-04-05 19:14:14, info CBS ending TiWorker final tune-up.

  I ran sfc/scannow twice and it comes with (1) violation that cannot fix every time.

  If there is enough information to go off of... Please indicate what would be your next steps to solve this problem and possibly remove the virus?

  Much appreciated,

  Lisa

  The first step is to make sure that you are not infected

  Please download the free version of Malwarebytes.
  Update immediately.
  Do a full scan of the system
  Let us know the results at the end.

  http://www.Malwarebytes.org/products

  If Malwarebytes comes back clean DISM run instructions that are at the end of this wiki

  Please run a check of system files (SFC) & DISM if you're on win 8 or higher 

  
  

  All instructions are in our Wiki article below...
  If you have any questions please ask us for .

  Check the file system (CFS) Scan and repair system files

• Error of SFC/Scannow

  Features Windows screen is empty. Tried the fix in the article of knowledge to run sfc/scannow, but he did not run. I lost hours and hours with this problem now!

  Error: Windows Protection could not start the repair service.

  Please read http://social.answers.microsoft.com/Forums/en-US/vistawu/thread/1467f44b-ee27-4f7d-98d7-f1c4b35b3395

  The "Windows features" dialog box is empty in Windows 7 or Windows Vista...
  http://support.Microsoft.com/kb/931712

  ~ Robear Dyer (PA Bear) ~ MS MVP (that is to say, mail, security, Windows & Update Services) since 2002 ~ WARNING: MS MVPs represent or work for Microsoft

• When running sfc/scannow, it says: error system3_.exe

  Original title: error system3_.exe

  When running sfc/scannow, it is said

  Microsoft Windows XP [Version 5.1.2600]
  Copyright (C) 1985-2001 Microsoft Corp.

  C:\Documents and Settings\Administrateur > cd\

  C:\>sfc/scannow
  Windows file protection could not initiate a scan of protected system files.

  The specific error code is 0x000006ba [the RPC server is unavailable.
  ].

  any suggestion?

  Thank you

  We need to back up a bit and get more information...

  Since the Microsoft Answers forum does not have any kind of information system request when a new question is asked, we know absolutely nothing about your system.  Not knowing the basic information a problem prolongs the frustration and the agony of these issues.

  Thank you MS Answers, allowing the resolution of simple problems as frustrating and a lot of time as possible.

  Provide information on your system, the better you can:

  What is your system brand and model?

  What is your Version of XP and the Service Pack?

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  The afflicted system has a working CD/DVD (internal or external) drive?

  You have a genuine XP installation CD bootable, which is the same Service as your installed Service Pack (this is not the same as any recovery CD provided with your system)?

  If the system works, what do you think might have changed since the last time it did not work properly?

  What is the problem you are experiencing that you think that sfc/scannow will correct?

  See if the remote procedure call (RPC) Service is running.   If it is not executed, it should run and many other things will not work if the RPC Service is not running.

  To do this, click Start, run and enter in the box:

  services.msc

  Click OK to launch the Services applet.

  Locate the remote procedure call (RPC) Service and see what he says in the status and Startup Type columns.

  If the RPC Service is not running (it must be), right click, choose Properties and see if you can start and change the type of start to 'automatic '.  If you make adjustments, click the OK button to save your changes, restart and make sure the settings "stick."

• sfc scannow found errors, but could not fix

  I have problems with cleaning disc. It runs, but never opens the window after execution. It gives an error at the bottom of the scan window "system error statement qued files.

  I ran sfc scannow and it finds corrupted files, but could not fix them.

  What should I do now?

  Thank you

  Jack Bowles

  Thanks for your information. I thought it was a waste of time and was upset to have to wait an hour and a half for it ends. I was under the impression that Check Disk would only verify that clusters are only valid as in they can keep information. But Check Disk resolved my sfc/scannow gap with files are corrupt.

  In addition, the utility repairman to start ran a test after a missed start and I noticed, he said there is a corrupted driver. She did not mention that now after running the disk check.

  All things look good now thanks to your information AirDump. My problem occurred after dust removal on my PC. I think that the plug for the power supply was the problem because he was a coward. Or maybe on the SSD cable was loose?

  Thank you very much for your time,

  Scott

• Microsoft C++ runtime error. When I am downloading World Of Warcraft. Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. (I ran sfc/scannow in the command window twice)

  I am trying to download the demo version of 'WoW' World of Warcraft. I get to the part where he is configing its parameters to my computer and get a runtime error that something caused my program is complete. I read the other posts which had similar problems so I ran sfc/scannow in the command prompt window. It reads...  Resources Windows Protection found corrupt files but was not able to fix some. Details are provided in the CBS.log newspaper. I've shortened, but it is easy to understand that there is a question that the scan will not fix. I tried to access the CBS.log newspaper and opened a text doc, that was a bunch of YYYYYYYYY. I'm a little lost here and my 10 free WoW trial days is weathering away without me =)

  Please help, thanks
  

  Borrow a Microsoft Vista DVD(not Dell, HP, etc Recovery DVDs) to do a repair installation

  If you see a startup Neosmart repair disk download here, this is NOT what you want.

  You want a good Vista DVD that contains the operating system files.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If you need a recovery media for your laptop back to factory settings, read this info:

  How to get Vista recovery Media and/or to use the Vista recovery Partition on your computer.

  There is no Vista free download legal available.

  Contact your computer manufacturer and ask them to send a recovery disk/s Vista set.

  Normally, they do this for a cost of $ small.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, ask them if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Ask them if you can also make recovery disk/s for the recovery Partition in case of a system Crash or hard drive failure.

  They will tell you how to do this.

  Every computer manufacturer has their own way of making recovery disk/s.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon. Mick Murphy - Microsoft partner

• SFC/scannow detected files corrupt in Windows 7 64-bit it can not solve, and continues to deny me access to fix.

  I ran SFC/scannow this evening and received an error message saying corrupted files had been found, but could not be fixed, and gave me this path to find the journal and view and/or correct the files.  I read a few articles in this community on how to access the logs as an administrator.  No instructions in all of the arrticles works, I denied access on any line to display the files and I can't have them, either.  My laptop Asus G74Sx actually works very well, these corrupt files are something that I should worry and spend hours and hours trying to coax my laptop to me as an administrator?  Can someone please tell me how to enter the newspaper and how to fix corrupted files?

  First step, run DISM to correct errors.  Instructions located in the underside of wiki

  Please run a check of system files (SFC) & DISM if you're on win 7 or higher 
  
  
  All instructions are in our Wiki article below... If you have any questions please ask us.
  Check the file system (CFS) analysis and repair system files & DISM to fix things SFC cannot

  Second step.  Re run SFC.  If errors occur in the log upload them on a single disc and we give a link to it in your next post

  There are MANY false positives and false negatives.

• sfc/scannow CBS. Corruption, resource monitor error LOG does not, the Preview picture broken, KB2538223 do not install, optional updates IE 10 and 11 unsuccessful.

  I just fixed a major problem I had with a screensaver HBO hogging all my resources. I had to reboot and when it would take place within 2 hours. Now, after cleaning and tweaking, this installation is only a few weeks and I am having some problems.

  1 CBS.log has some corrupted files after doing a sfc/scannow.

  2 resource Monitor works properly and will not load properly not display anything without error message.

  3 image preview does not work on my photos for the thumbnails and will crash after the use of native Photo Viewer after about 5 pictures in the same directory leafing.

  4. Windows Update will not be installed "Security Update for Microsoft Visual C++ 2008 Service Pack 1 Redistributable Package (KB2538243).

  5. then Windows Explorer 10 and 11 will not be installed and the optional updates that tend to bother me even though I know that I don't need them. But also say that they have failed after that reboot although says that she is successful in the history of Windows Update.

  MOD, do not hesitate to break up of my questions on the correct forums, I want to be like Windows stock as possbile.

  Hello

  Follow this link http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/resource-monitor-not-working/5b471988-ead8-47c7-9078-45ac3aa0c981

  At latest

• sfc/scannow error message - "Windows Resource Protection could not perform the requested operation".

  Recently, things are held in my computer after trying themes. I don't know what I fiddled with, but I do know something ExplorerFrame.dll in system32 and sysWOW64. I've tinkered with it to try to change my navigation settings. (The arrows in windows Explorer)  I don't know if that's the problem, but my main problem is when I try to save anything, or "save under" or try to save anything even in microsoft word or adobe reader, none of the folders in my navigation pane is there! It's just empty! I tried to solve this problem with sfc/scannow, but the message that I put in the title appears when it reaches 10%! I've tried everything literally! I tried running sfc/scannow offline, and it comes up with a message 'Protection of resources Windows could not start the repair service.' I also tried to check in my services to see if the Windows Module is manual in the startup type, and it is! The last thing I could think that I tried was the start in safe mode with command prompt, and it still does not. If anyone can help me, please! I've tried everything! * I forgot, I have try running CMD administrive rights, still won't work *.

  Thank you for the help, but I figured it out by myself. I replaced the old version ExplorerFrame.dll in system32 and sysWOW64 folders to a new! I managed to do it by copying the correct files to another computer and replacing them with the 'old' I have fiddled. Thanks for your help!