sfc/scannow poster always files corrupt that it cannot repair

Similar Questions

• sfc/scannow detected some files corrupted... unable to fix... What do I do?

  I use a windows 32-bit Home Basic, it was preinstalled on my PC so I don't have the CD of it but it has a recovery of files on my PC.

  Can you please help me solve this problem? If re - install the vista, can I install fresh or repair only... Remember I don't HAVE THE CD, IT WAS PREINSTALLE.

  Hello kwamectc,

  To determine which files can be repaired by the System File Checker tool, follow these steps:

  1. Open an elevated command prompt.
  2. Type the following command and press ENTER:
     findstr/c: "[SR] cannot repair the military file" %windir%\logs\cbs\cbs.log > sfcdetails.txt

     Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  3. Type the following command and press ENTER:
     Edit sfcdetails.txt

     The Sfcdetails.txt file uses the following format:

     The date/time SFC detail

     Repair/replace, follow the steps below:

  1. At a command prompt, type the following command and press ENTER:
     takeown /f Path_And_File_Name

     For example, type takeown /f E:\windows\system32\jscript.dll.

  2. Type the following command and press ENTER to grant administrators full access to the file:
     ICACLS Path_And_File_Name/grant ADMINISTRATORS: F

     For example, type icacls E:\windows\system32\jscript.dll/grant administrators: F.

  3. Type the following command to replace the file with a known good copy of the file:
     Copy Path_And_File_Name_Of_Source_File Path_And_File_Name_Of_Destination

     For example, type copy E:\temp\jscript.dll E:\windows\system32\jscript.dll.

  Since you already have a scan to find the file manually and replace it with the correct filter. You can copy and send your diary here also. Let us know if you need help. Make it a great day!

  "In the end, the love you take, is equal to the Love You Make"

• I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  I bought Photoshop element 14 this morning, get the serial number Adobe e-mail and downloaded the software, but... Adobe is always telling me that they cannot validate the software. What should I do now?

  Please see the links below.

  • Invalid serial number error
  • Error "serial number is not valid for this product". Creative Suite

  Hope this will help you.

  Kind regards

  Hervé Khare

• sfc/scannow command, found some corrupt dll files and can't find is not in the location of the store to fix, how to fix c:\windows\system32\opcservices.dll, TapiMigPlugin.dll, SxsMigplugin.dll, docagent.dll, tcpmon.ini files

  I checked the filesystem with the command sfc/scannow, it finds some dll files corrupted and it is also not instead of store, how to fix c:\windows\system32\opcservices.dll, TapiMigPlugin.dll, SxsMigplugin.dll, docagent.dll, tcpmon.ini corrupted files please help, I must pass several times to start my computer, it gives white screen after loading windows files. several times it gives Office to work. rest all the time balnk screen.

  Thanks for your response

  JKMV72

  When SFC cannot repair the files, it's time for a repair install from the dvd of the OS.  While you may fix one by one, you never know what else is wrong with the operating system.

• sfc/scannow "Windows Resource Protection could not start the repair service".

  With the help of an elevated command prompt I'm unable to start the Sfc/scannow. I checked Services.msc and TrustedInstaller is started. It was suggested that I should check the logs for the System File Checker. However I can only interpret the newspapers and even if I could I do not know how to correct the error that lies in the newspapers. I was wondering if someone would be able to interpret the papers for me and guide me on how to correct errors that may be found in the newspaper that prevent me from running "Sfc/scannow" thanks.

  Since it is win 7 you cannot run DISM, so your only option is to do a repair install of win 7 dvd.

• Error file corrupted or incompatible, cannot import files MP3 to Windows Movie Maker.

  Original title: Amazon MP3 in Windows Movie Maker import problems.

  Still have Windows XP.  Bought and download MP3s on Amazon, but is unable to import into Windows Movie Maker.  Says file corrupt (all of them) or is not compatible (MP3 should be).  I tried to convert it to WAV and WMA - still will not work.  Get desperate.  I would be very happy any help you could provide.  Thanks in advance.

  Experienced same problem with Amazon MP3 downloads.  Could not bring to import into Movie Maker.  Read somewhere to convert WMA of the song, but couldn't find out how to do this.  I wanted to download 3rd party software.  Had already created the CD with the songs that I wanted to use mm.   Ripped from this CD for PC with Windows Media Player, which gives you option to change the format.  Changed the format to WMA format and then imported into Movie Maker.  After all, hope this time it helps you, too.

• corrupted Media Player cannot repair

  updates the drive cannot continuously access music etc page freezes

  Have you tried the System File Checker program?

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista (or 7)
  http://support.Microsoft.com/kb/936212/#appliesTo

  How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
  http://support.Microsoft.com/kb/929833

  How to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista
  http://support.Microsoft.com/kb/928228#appliesTo

  Have you had an edition of "N" of Windows, which would explain your problem.

  Windows 7 N editions offer choices
  http://Windows.Microsoft.com/en-us/Windows7/products/what-is-Windows-7-N-Edition

  Media Feature Pack for Windows 7 N with Service Pack 1 and Windows 7 KN with Service Pack 1 (KB968211
  http://www.Microsoft.com/en-US/Download/details.aspx?ID=16546

  Here is an alternative Player to try.

  VLC media player
  http://www.videolan.org/VLC/

• SFC/SCANNOW can't fix the corrupted - files windows 7

  SFC/SCANNOW finds corrupted files, but cannot fix them in Windows 7 ultimate.

  I don't have the installation disc.

  Thanks a lot for your help!

  Hi MarkmBha,

  Thank you for visiting Microsoft Community.

  According to the description of the issue scan sfc could not fix corrupted files. I suggest you to refer to the suggestions provided in the below threads and see if it helps you to solve the problem. Make sure that you follow the steps that is marked as answer.

  sfc/scannow detected some files corrupted... unable to fix... What do I do?

  Note: This thread deals with Windows Vista but also applies to Windows 7.

  Keep us.

  Kind regards

• sfc scannow windows resource protection found corrupt files but was not able to repair

  Original title: sfc/scannow

  Hello.

  I tried to repair internet explore in windows vista with the command prompt

  I've done sfc /scannnow and it gave me

  Windows resource protection found corrupt files, but could not too distressed some of them

  details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper

  for example c:\windows\logs\cbs\cbs.log

  I found them the corrupted files, but I have no idea on how to fix or remove.

  UH how to analyze the entries in the log file generating the program Checker (SFC.exe) resources of Microsoft Windows in Windows Vista

  don't tell me no how to fix or remove.

  I have windows vista edition Home premium 64-bit service pack 2.

  Hey Crystal

  If they are difficult to pierce the CD to Windows Media Player 11 try these links below it should help them or at least show them in the right direction on how to burn a CD. Hope that helps some.

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Windows-Media-Player/11/burn

  http://Windows.Microsoft.com/en-us/Windows-Vista/burn-a-CD-or-DVD-in-Windows-Media-Player-frequently-asked-questions

• SFC/scannow can't repair corrupted files

  original title: RAN SFC/scannow have currpted files cannot get rid of them ran newspaper and he told me the members file name how can I del these files currupt Email removed for privacy

  has ran sfc scannow found cruppted of the windows file search journal first I ran microsoft Mr don't fix no newspaper help list the names lik / / can't fix the military record [01:25 {12} "settings in the microsoft-windows-bar side.

  How can I remove this file please

  E-mail address is removed from the privacy *.

  Hello

  Download Autoruns and check under the tab Sidebar Gadgets - remove anything which is a yellow Standard
  Folder marker and/or points to a temp area or non-existent.

  Autoruns - free - see what programs are configured so that it starts automatically when your system
  boots and you login. Autoruns shows you the full list of registry and file locations where
  applications can configure Auto-start settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx

  ===========================================================

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  in Windows Vista
  http://support.Microsoft.com/kb/928228

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read the newspaper/txt files easier if you right click on Notepad or Wordpad then RUN AS ADMIN - then
  You can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs) as needed.
  (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• sfc/scannow cannot fix corrupted files windows 8. DISM / /restorehealth//cleanup-online image does not work! Any help appreciated.

  Hello

  I can't try to repair the corrupted files on my Sony VAIO laptop to Windows 8. I hope someone can help me solve my problems. I would really like to know how to fix these problems I'm having. It really gets me.  If ever I have similar problems in the future.
  All my drivers are up to date. I'm pretty confident that's not a malware issue. I take care of my line on activities that could infect my computer. Although I'm not 100% that excludes. I use Mcafee security Suite (fully updated and free with my broadband package). No other scanners time real AV are running. I However sometimes use a registry cleaner, after installation and installation of various programs. but I only use the default methods, never the registry COMPLETE cleaning cleaning method. In my view, these could create problems if used files. I also defragment my HARD drive of 1 TB at least once a week.
  DISM / / cleanup-image online /restorehealth/ also is not working error message and log files can be found below!
  I ran sfc/scannow and several times,
  whenever I get the error message stating:
  Windows resource protection found corrupt files but was unsable to correct some
  of them. Details are provided in the cbs.log windir\logs\cbs\cbs.log newspaper.
  For example C:\windows\logs\cbs\cbs.log. Note that iis logging currently not
  supported in offline maintenance scenarios.
  When I reboot win 8 after running sfc/scannow. Windows 8 shows that it is far from my system of up to 100%
  It charges fine. I have run the sfc/scannow, and then he did exactly the same thing. I reboot and it updates my system. but does not not my files corrupted!
  CHKDSK /F also freezes 27%. But when I starts in the my Sony VAIO #1 recovery disk and run diagnostics hardware HARD drive repair tool to try to fix the sectors defective etc on my HARD drive
  which works 100% and says there is NO problem!
  Here are the files of newspapers that I can access. I have to admit, now, that I do not understand them.
  even after much reading online:
  20/07/2013
  sfc/scannow eror message =

  Windows resource protection found corrupt files

  but has been unable to find some

  of them. Details are provided in the CBS.log newspaper

  windir\Logs\CBS\CBS.log for example C:/windows\Logs\CBS\CBS.log.

  Note that logging is not currently supported in offline scenarios.

  (ACCESS DENIED) when I try to open the C:/windows\Logs\CBS\CBS.log log file.

  DISM / online/cleanup-image /restorehealth/

  21/07/2013 of the log files and error messages

  0x800f081f

  the source file is not found

  Use the source option to specify the location

  the files that are needed to restore the function. To learn more

  information on the specification of a location of the source,

  See http://go.microsoft/fwlink/?linkid=243077

  The DISM log file can be found at C:\windows\Logs\DISM\dism.log
  I hope that I can help to solve the problems of thses
  concerning
  How to run the command "SFC/scannow" at startup or in Windows 8
  Information

  This will show you how the sfc/scannow command to start or in Windows 8 in an attempt to trouble altered or modified system files.

  Tip

  If you get the error that Windows resource protection could not start the Repair Service when you try to run the SFC, then make sure that the Windows Modules Installer service is active and set to Manual.

  Services - Start, Stop and disable in Windows 8

  If SFC is unable to repair the system files corrupted because the Bank (source) is damaged, then you could run the Dism/online/Cleanup-Image /RestoreHealth command to set the Windows component store corruption and then then try to re-run the SFC scan.

  OPTION ONE

  To run the SFC/SCANNOW command. at startup

  
  1. open a prompt at startup.

  2 in the command prompt, type diskpart and press ENTER, and then type the size of the list and press ENTER. (see screenshot below)

  
  
  
  3 make Act your boot drive drive letters (ex: 350 MB "System Reserved" partition) and the drive of Windows 8, type Exit , and then press ENTER. (see screenshot above)
  NOTE: If you do not a "system Reserved" partition and are not multi-boot with other operating system, then the boot drive and the drive of Windows 8 may be the same drive letter.

  4 in the command prompt, type the following command and press enter. (see screenshot below)
  NOTE: , You will see a blinking cursor at the prompt to the end. It will take a while to finish running though.

  sfc/scannow damaged = C: \ /offwindir = D:\windows

  Note

  You need to replace the the drive letter of the partition or volume where your Startup system files are stored in the offbootdir = C: part of the order above instead.

  You need to replace the letter of your partition or volume Windows 8 in the offwindir = D: is part of the above command instead.

  
  
  
  5 when the analysis is finished, I hope you will see an everything is ok message as below.
  
  
  
  6 close the command prompt and restart the computer to start Windows 8.
  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file system occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  SECOND OPTION

  To run the SFC/scannow command in Windows 8

  
  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, type sfc/scannow , and then press enter. (see screenshot below)
  NOTE: It may take some time to complete the race.

  
  
  
  3 when the analysis is finished, I hope you will see that all is ok message as the screenshot below.
  NOTE: Fortunately CFS was able to repair my files automatically damaged system.
  
  

  

  Note

  If SFC could not fix something, then run the new command to see if it can be able to next time. Sometimes, it can take by running the sfc/scannow command 3 times restart the PC after each time completely fix everything what he is capable of.

  If this isn't the case, then run Dism/online/Cleanup-Image /RestoreHealth to repair any corruption component store, restart the PC later and try the sfc/scannow command.

  If still no, then you could do a Refresh of Windows 8, or run a System Restore using a restore point dated before the wrong file occurred to fix. You may need to repeat doing a restore of the system until you find a restore point that is older that may work.

  If not yet, then you can use the steps in the TIP box in the THREE OPTION section below to manually replace the files SFC could not fix.

  OPTION THREE

  How to see and read that only "CFS" Scan results from CBS. JOURNAL

  NOTE: SFC when is running, it records its actions in the C:\Windows\Logs\CBS\CBS.log. The steps of this option will show you how to view only specific SFC entries with the [SR] tags in the CBS.log newspaper. This can be useful to show you what files SFC couldn't fix automatically if you want to try and manually change them.

  1. open an elevated command prompt in Windows 8.

  2 in the elevated command prompt, copy and paste the following command and press enter.
  NOTE: This will place a file sfcdetails.txt on your desktop with only the SFC scan details of the results of the CBS. Log in this.

  Code:

  findstr /c:"[SR]" %windir%\Logs\CBS\CBS.log >%userprofile%\Desktop\sfcdetails.txt
  

  3 close the elevated command prompt.

  4. open the file on your desktop to see the SFC sfcdetails.txt analysis details in convertible bonds. NEWSPAPER.

  5 when you are finished, you can safely remove the sfcdetails.txt file later if you wish.

  Tip

  If you need to replace a corrupted system file that SFC cannot fix, this will show you how to:

  If you have many files are corrupted, then run Dism/online/Cleanup-Image /RestoreHealth to repair any component store corruption, restart the PC after and try the sfc/scannow command.

  If you have only a little, then you could manually extract a new copy directly from your installation of Windows 8 DVD or USB thumb drive, or ISO if file in a virtual machine.

  Check out the Windows 7 Installation DVD files

• I miss files Sfc/scannow but not able to repair

  Hi, I am a user of windows since 1999... I went through various uptades... But this windows 7 when I installed the first had damaged some startup files... I ran the sfc scannow as Administrator option... it verified data and said that he cannot repair the startup files... Because of that now sometimes I get the blue screen of death... So what should I do to solve my problem... Please help me with detailed steps... as quickly as you can

  Thank you

  Chebli

  Chebli

  Select Start, all programs, accessories, right-click right-click command prompt and click Run as administrator in the menu dropdown. Type or copy / paste: findstr/c: "[SR]" %windir%\Logs\CBS\CBS.log > '% userprofile%\Desktop\sfcdetails.txt' and press the ENTER key. You will find a sfcdetails.txt file on your desktop.

  "Please note there are three spaces in the command: findstr - c/c/c, between [SR]" and%windir% between CBS.log and > ' % userprofile .

  Please download a copy of your file sfcdetails.txt on your OneDrive as a shared file and post a link here. Enter sfcdetails.txt in the search box above the Start button and press the ENTER key to locate the file created.

  Note The Sfcdetails.txt file contains details of every time that the System File Checker tool has been run on the computer. The file contains information about the files that are not repaired by the System File Checker tool. Check the date and time entries to determine the problem files that were found last time that you ran the System File Checker tool.

  Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download the file to your OneDrive, to share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode. If the report is in one language other than English, please indicate the language.

  Please download and share with everybody fresh copies of your System log and journal of the Application (two files) of your event viewer on your disc one and post a link here. You can delete any previous copies of your OneDrive records.

  To access the system, log, select Start, Control Panel, administrative tools, Event Viewer, in the list on the left of the window, expand Windows logs and select System. Place the cursor on the system, select the Action in the Menu and record all events like (the evtx default file type) and give a name to the file. Do the same for the application log. Do not offer not filtered files. Do not place the cursor in the list of reports before selecting the Action from the menu. Do not clear the logs so that you have a persistent problem.

  For assistance OneDrive see paragraph 9.3:
  http://www.gerryscomputertips.co.UK/MicrosoftCommunity1.htm

• Windows 7 troubleshooting error 0x8E5E0247 after running sfc/scannow

  I'm having this problem of solving the problems of network connection. I ran sfc/scannow, and the results are that Windows Resource Protection finds corrupted files but was unable to fix. What should I do now?

  Hello

  Don't forget to run checkdisk so

  How to run check disk in Windows 7
  http://www.SevenForums.com/tutorials/433-disk-check.html

  =====================================================

  The errors may not have something to do with the problem you are experiencing:

  Check the Option 2 here:

  How to fix the system files of Windows 7 with the System File Checker
  http://www.SevenForums.com/tutorials/1538-SFC-SCANNOW-Command-System-File-Checker.html

  Many files that SFC cannot resolve are not important.

  Start - type in the search box-> find CMD in top - click right on - RUN AS ADMIN

  put the command from below (copy and paste) in this box and her and then press ENTER.

  findstr/c: "[SR]" %windir%\logs\cbs\cbs.log > sfcdetails.txt

  who creates the sfcdetails.txt file in the folder that you are in when you run it.

  So if you're in C:\Windows\System32 > then you will need to look in that folder for the file.

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe) program
  generates in Windows Vista (and Windows 7)
  http://support.Microsoft.com/kb/928228 and http://support.microsoft.com/kb/929833

  This creates sfcdetails.txt in C:\Windows\System32 find and you can post the errors in a message
  here. NOTE: there are probably duplicates so please only post once each section error.

  You can read that the journal/txt files easier if you right click on Notepad or Wordpad and then RUN AS ADMIN-
  then you can navigate to sfcdetails.txt (in C:\Windows\System32) or cbs.log (in C:\Windows\Logs)
  According to the needs. (You may need to search sfcdetails.txt if it is not created in the default folders.)

  I hope this helps.

• sfc scannow found errors, but could not fix

  I have problems with cleaning disc. It runs, but never opens the window after execution. It gives an error at the bottom of the scan window "system error statement qued files.

  I ran sfc scannow and it finds corrupted files, but could not fix them.

  What should I do now?

  Thank you

  Jack Bowles

  Thanks for your information. I thought it was a waste of time and was upset to have to wait an hour and a half for it ends. I was under the impression that Check Disk would only verify that clusters are only valid as in they can keep information. But Check Disk resolved my sfc/scannow gap with files are corrupt.

  In addition, the utility repairman to start ran a test after a missed start and I noticed, he said there is a corrupted driver. She did not mention that now after running the disk check.

  All things look good now thanks to your information AirDump. My problem occurred after dust removal on my PC. I think that the plug for the power supply was the problem because he was a coward. Or maybe on the SSD cable was loose?

  Thank you very much for your time,

  Scott

• SFC/scannow is a strange and repetitive response.

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection found corrupt files and managed to fix
  them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For
  example C:\Windows\Logs\CBS\CBS.log

  C:\Windows\System32>sfc/scannow

  Start scanning system.  This process will take time.

  Start of the phase of verification of the scanning system.
  Full check of 100%.

  Windows resource protection found corrupt files and managed to fix
  them. Details are provided in convertible bonds. Journal windir\Logs\CBS\CBS.log. For
  example C:\Windows\Logs\CBS\CBS.log
  

  When I run SFC/scannow, I get the result that you see above. It is supposed to be repaired. When I run again, I get exactly the same answer. When I restart the computer and run it, I get the SAME ANSWER. What is going on??? He repairs it or not? If that's the case, why it keep saying that he ' finds files corrupted and managed to fix their "? If not, why it keep saying they are repaired? Am I missing something here? I looked in the CBS.log newspaper and find nothing, but I'm not familiar with what I'm looking at. I would like to add as an attachment if there was a way to do it. Anyone has an idea of what is going on here please let me know.

  Thank you.

  I was puzzled with this constant appearance of inetres.admx and inetRes.adml in SFC analysis newspapers.  So I researched and found out that the Vista system file cache is not properly updated and SFC will then copy on older versions of these files, after which another service will copy on the good of the cache files of IE9.  This of course sets up the same problem once more when you run scannow SFC.  I guess we can ignore this as the correct files back in place, but for the sake of clarity, it is probably best to delete and reinstall IE9.  The defect appears for Vista SP2 when is IE8 IE9, but is rejected when switching from IE7 for IE9.