SFE2000 restarts continuousley with broken image
I'm looking for just a clue to switch back the active image to the right, but I have not a chance cause this is an intermediate image of a software upgrade and is not possible in the CLI to cause continuous rebooting.
Thanks for help.
Andreas
Hi Andreas,
Even if I use my SGE2000 for example, I don't think it's different for the SFE2000.
I started hyperterminal to 115200 baud rate according to the installation guide.
HyperTerminal, I tried the following, restarted my SGE2000 and back when he asked me to.
I then had a possibility to download the software via Xmodem.
;
Checksum test Boot1... PASS
Boot2 checksum test... PASS
Flash Image Validation Test... PASS
Software version BOOT 2.0.0.03 built on May 18, 2009 11:44:56
Networking with CPU device based on AXXXXXEJ-S core.
AutoBoot in 2 seconds: press Esc or RETURN to stop and get into the dance.
[2J
Start menu
[1] download software
[2] erase Flash file
[3] password recovery procedure
[4] access the Diagnostic Mode
[5] the Terminal value baud rate
[6] menu of battery
[7] back
Enter your choice or press 'ESC' to exit:
Download of code using XMODEM.
Failure to fix the unit then just call the helpdesk small business through the following URL;
http://www.ciscosystems.com/en/us/support/tsd_cisco_small_business_support_center_contacts.html
Hope this helps
Best regards, Dave
Tags: Cisco Support
Similar Questions
-
Previously, I was getting "download error" while trying to install add ons, after having reinstalled the add ons page now appears in HTML with broken images but the navagation bar (Add-ons, Extensions, Plugins etc) is still usable. What should I do?
Thank you
Ray
Reload the Web page while bypassing the cache using one of the following steps:
- Hold down the SHIFT key and click the reload with a left click button.
OR
- Press Ctrl + F5 or Ctrl + SHIFT + R (Windows and Linux)
- Press command + SHIFT + R (Mac)
Let us know if this solves the problems you are having.
-
BlackBerry smartphones broken image in the media, photos, images icons
Peripheral is installed last BB Desktop Manager and Roxio BB9000 to manage image files that initially, I got 5 photos loaded into the BB9000 and could see very well in the media, photos, images, I then took 2 pictures with the camera BB9000 and saved. They came very well in all the images in media, photos, I then used Roxio, launched from the BB Desktop Manager to remove these 2 photos of the BB9000 and everything seemed to be fine as Roxio showed the 5 original images as present in the home, user, file photo when I disconnected the BB9000 and accessible Media, photos, images There are now 5 images and 2 broken icon thumbnails. Then I activated the mass of home media, Options, memory, I then connected the BB9000 via USB (to stop BB Desktop Manager at this point) and open the disk (in my case G:\) in Explorer. I clearly see 5 images in the original folder and each of them can be opened through Explorer. Then I unplugged the USB cable and this time there are 4 icons image shattered by the media, photos, images, while the 5 original images are still all there. An image has been duplicated (called trail.jpg) and if I delete one using the BB9000, probably both will disappear but for the moment, did nothing. If I select one of the broken image in media, photos, images icons and select Remove, a prompt appears "the selected file is read-only. Are you sure you want to delete? ». By selecting Yes, does nothing. The image remains a broken image icon. How does it evolve?
This seems to be that the actual image file has been removed, but the bbthumbs.dat file still has the image in his thumb nail index.
With the BlackBerry device powered time, remove battery for a few seconds and then reinsert the battery to restart.
After the reboot, give him five minutes to rescan the media card.
Now, see if the thumbnail image broken remains.
-
CF8 multi-server IIS6-Jrun broken Images
Hi all
We had a problem with the CF8 Enterprise Edition MultiServer installation. I would appreciate any idea in there.
Server details:
Web servers
IIS 6.0 on Windows 2003 Server
Use the JRun connector to communicate with the servers of CF (.cfm .cfml .cfc .cfr mapped to jrun_iis6.dll)
CF 8 Server:
CF8.0.1 Enterprise edition; on windows 2003 server; 1 cluster of 2 instances; run the default proxy service ports (51000, 51002 and so on).
We want to use the reverse proxy for each file type for specific virtual directories on the Web server. It is .jpg, .gif, .css and .js files.
Problem:
The specific file formats of coldfusion are transferred by proxy to CF servers without problem (as an IIS mapping exists for each of them). However, for static file formats it does not (images broken, missing files .css etc..)
We observed that:
(a) if there is no extension of web server mapping, IIS 6.0 sends a message to the images on the page 404
(b) if there is an extension mapping to the same jrun_iis6.dll on the web server, we get an error 503 from the server in CF (indicating no mapping on the CF server)
(c) if in addition to (b), we introduce the url scheme mapping in the web.xml file and associate it with CfmServlet, we start to get the image content in a stream of data (= 200 server response) but with the incorrect content type (it crosses in text/html). The images appear always broken, because the content-type is incorrect.
At this point, we are at a loss of what we miss them.
Someone at - it meet this problem before... pointers will be greatly appreciated!
Concerning
KeV
deepblue9999 wrote:
> We want to use the reverse proxy for each specific file type virtual
> directories on the Web server. It is .jpg, .gif, .css and .js files.
>
> Problem:
> The specific file formats of coldfusion are transferred by proxy to the CF servers without a
> problem (since IIS mapping exists for each of them). However, for the static method
> file formats it doesn't work (broken images, missing files .css etc..)(> c) if in addition to (b), we introduce a mapping of the model of url in the web.xml file, and
> Associate it with CfmServlet, we begin to get the content of the image in a
> stream (= 200 server response) but with the incorrect content type (this is
(> everywhere in text/html). Images always appear broken because the content-type
> is incorrect.Very close. You must map the extensions to the FileServlet, not the
CfmServlet. Then restart CF and you're in business. You can even remove
the mappings in IIS, the mappings in the web.xml file outrepasseront them anyway.Jochem
--
Jochem van Dieten
Adobe Community Expert for ColdFusion -
The hard drive on the Macbook pro was repartioned, all the boot camp and other drivers updated and Windows installed from the installation DVD. All the Windows updates available from 2012 (installation disc is 2012) until today have been installed and Boot camp 5.1 with all its drivers installed. Restoration was launched with an image of an external hard drive and a system repair disc system. Once Windows loads after the login screen, it crashes. A blue screen appears with the error code 0 x 00000034 and mention cache_manager... Windows restarts by itself and I can only use it in safe mode, which means that I can't download or install upgrades or programs.
Analyze the dmp file since the first crash with Windows debugging tool showed that the problem seems to lie with
AppleHFS.sys and svchost.exe with Bug Check 34 {107, ffffffffc0000420, 0, 0}.
Here is the link to the complete analysis of the dmp for details file:
https://1drv.Ms/u/s! AuzUtP_j9nLagwWWqWUTre4qNYmu
Thank you very much in advance for your help
Moschtermeedchen
AppleHFS.sys/AppleMNT.sys are used to allow access to filesystems OSX JHFS +. Restoring Windows on Mac backups can be painful. If you have already fresh install of W7 on the internal drive, try the restore without installing any driver BC. Please be aware that such a restore is not aware of the partitions on your internal drive and can erase your internal drive.
-
I can't put my wallpaper with an image of Windows Live Photo gallery.
I am currently using Windows XP sp3, and whenbever I'm trying to set my wallpaper with an image of Windows Live Photo Gallery, the image will be there for a few minutes then goes to blue screen. I can not change to any other image from those available or set it to any other image from the photo gallery. I tried to do a system restore and my old picrure Office will be there, but whenever I try to change to another is the same thing. Is there anyone that cn offers a solution to this problem?
I had the same problem and just think about it. The image must be saved in the folder "my pictures." Right-click of your screen and go down to "Properties" there, press the 'Desktop' tab and click on the 'Browse' button and select your image in the menu. After you have finished click the 'Settings' tab and click on the "Advanced" button, which will bring up a new window, under the section "compatibility, select the"restart the computer before applying the new display settings' option. " Apply then hit and your image should appear as background.
-
Xperia z3 foto widget display the broken image icons instead of thumbnail/preview image
Initially, I used my Z3 without SD card. Any word very well: album AND the foto widget that allows to navigate through the photos.
After
-installing an SD card,
-changing the location for newly taken photos on SD card
- AND by moving some pictures of other directories-
- AND the creation of a number of files .nomedia on these directories to make these photographs appear not not in the album, nor in the foto widget.
foto widget displays an icon of a broken image for all photos taken prior to this change. All new photos appear in the widget and app album.
I delete the file data and the album (in album settings - all apps) cache-.
It does nothing (so far).
How can I force the app/widget album to recreate its database and preview/thumbnails?
Thank you very much.
M ~.
Working solution for the following:
Order the soft MediaStorage
Settings > Apps > all > storage media (FROM: Medienspeicher) "App Info" > stop AppData deleted from the App MediaStorage
Settings > Apps > all > storage media (FROM: Medienspeicher) 'App Info' > clear dataRestarted the application (via MyPhoneExplorer) or by rebooting the phone.
The process appears in the form "android.process.media" in the list of processes (not sure, I guess) android
To provide a treatment could turn the endurance mode or add "MediaStorage" to the list of exceptions of runing apps background even in mode stamania.
(> a) how long it would take to recreate the database and photos? The directory of the main image (DCIM on the SD card) contains > almost 1000 photos).
A: it is __NOT__ take very long. For my 1000 + pictures and a few videos is was a matter of minutes to see the widget started foto avatars correctly and see the album recovers very quickly. If you reach a corner of the album or the photo images widget still not recovered, the image appears rather quickly.
(>) b where residing the .thumbnails directory? -After accepts the SD - be - it in/storage/sdcard1/DCIM or > in/storage/sdcard0/DCIM as it was before the installation of the SD card?
R: it seems that the .thumbnails directory still resides on the internal memory (i.e./storage/sdcard0/DCIM). This is at least the case for my phone.
It also seems that .thumbnails files are ONLY used for the foto widget for the App album someone could confirm?
(> c) how to either force the media scanner to run and update the widget photos foto and the album database / see/check that
> it runs.
Stop the MediaStorage process, clear data from this application and start it again again and keep visiting the widget from the album and or foto.
See you soon,.
Michael
-
failure to communicate with the image drum?
My m175nw is only 2 weeks... Everything worked great until I did the Firmware update. Now, I get the following error and I think I printed only one (1) page since I bought this thing
10.0004 power error
10.1004 supply memory errorThere is a failure to communicate with the imaging drum.
The update of the firmware was "2012-08-27, Version: 20120806, 10.28 M" and the error message
10.0004 power error
10.1004 supply memory erroris the display on the printer control panel. I was running Windows 7 (64 bit) at the time of installation, but I also have a system dual boot and can run MAC EVALUATE which the same message after restarting the printer. Even with the computer turned off the M175nw displays the same error message. As stated earlier, the printer is only 2 weeks, I think that I've printed 2 pages (with no problems) and the above-mentioned error did not appear after the update of the Firmware... I tried a reset to the default settings, but unfortunately that has no effect when the firmware has been updated.
-
Cisco router restarts randomly with Bus error
Cisco router restarts randomly with the following error:
System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013
I've pasted below see the chimneys and release the version.
view the stacks
Minimum factory chimneys:
Format name / free
5396/6000 inspect Init Msg
Subsystem SPAN 5368/6000
58920/60000 EEM Auto record Proc
Automatic start of 4772/6000 upgrade process
DIB 5164/6000 error message
HAND OF SASL 5396/6000
4968/6000 LICENSE DEFAULT AGENT
5368/12000 Init
4216/6000 update prst
4384/6000 VPN_HW_MIB_CREATION
5188/6000 RADIUS INITCONFIG
Update process random rom 2128/3000
8356/12000 SSH process
Stats URPF 5316/6000
Interruption of battery level:
Level named format / unused
Network interfaces 1 1484828 6284/9000
2 3264990 8548/9000 DMA/Timer Interrupt
3 1 8388/9000 PA Int management Manager
Console 4 115 8612/9000 Uart
External interrupt 5 0 9000/9000
NMI 7 223352 8564/9000 interrupt handler
Spurious interrupts: 11
System has been restarted by error of bus to PC 0x4183614C, speech 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013
Software of 2800 (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Updated Thursday 25 February 09 17:55 by prod_rel_team
Image text-base: 0 x 40011240, database: 0x42B41940
The failure of the system stack trace:
FP: 0X472252B8, RA: 0X4183614C
FP: 0 X 47225310, RA: 0X418312F8
FP: 0 X 47225348, RA: 0X41647DC0
FP: 0X472253A8, RA: 0X4164A8F4
FP: 0 X 47225428, RA: 0X4164B248
See the version
Cisco IOS software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4 (24) T, RELEASE SOFTWARE (fc1)
Technical support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Updated Thursday 25 February 09 17:55 by prod_rel_team
ROM: System Bootstrap, Version 12.4 (1r) [hqluong 1r], RELEASE SOFTWARE (fc1)
availability of Cisco is 28 minutes
System returned to ROM by bus to the 0x4183614C PC error, address 0 x 95848 at 09:30:28 UTC Tuesday, April 23, 2013
System image file is "flash: c2800nm-advsecurityk9 - mz.124 - 24.T.bin".
This product contains cryptographic features and is under the United States
States and local laws governing the import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third party approval to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. laws and local countries. By using this product you
agree to comply with the regulations and laws in force. If you are unable
to satisfy the United States and local laws, return the product.
A summary of U.S. laws governing Cisco cryptographic products to:
http://www.Cisco.com/WWL/export/crypto/tool/stqrg.html
If you need assistance please contact us by mail at
Cisco 2821 (revision 53.51) with 1036288K / 12288K bytes of memory.
Card processor ID FCZ1017732F
2 gigabit Ethernet interfaces
2 modules of virtual private network (VPN)
Configuration of DRAM is wide with parity 64-bit capable.
239K bytes of non-volatile configuration memory.
250880K bytes of ATA CompactFlash (read/write)
Configuration register is 0 x 2102
You want to use the tool interpreter of output for this work:
http://www.Cisco.com/pcgi-bin/support/OutputInterpreter/home.p
For more information about the resolution of crashes, see this article:
http://www.Cisco.com/en/us/products/HW/IAD/ps397/products_tech_note09186a00800b4447.shtml
In this case, it looks like CSCsy09250, described here:
http://www.Cisco.com/en/us/products/CSA/Cisco-SA-20100324-SCCP.html
You should contact Cisco for the software updated by following the instructions of this bulletin.
That crash possibly caused by part of sone intentionally sends out packets malformed to your device, so if you have reason to believe that someone in your community could run metasploit or similar "Penetration Testing" tools, you can look into that as well.
-
No image with customized image of Windows 10 Acer Iconia W510
I'm trying machines Acer Iconia W510 image with an image of Windows 10 we did. We have already photographed a few tens of individuals. A dozen, however, refuse to take the picture. They are currently on Windows 8. The image on an external hard drive that plug us into the USB port.
The steps I take to the imaging process are as follows: "Change PC settings"->"update and recovery"-> "recovery"->"Advanced startup" and I click on the button 'Restart now', who sends me to a screen with three options, continue to windows 8.1, troubleshooting, and turn off your PC.
I select 'Troubleshoot '->' Advanced'-> "Image system recovery"
The Acer screen appears with "Preparation of the system image recovery" at the bottom. I sign in the administrator account when prompted to choose an account.
A window appears and scans for images. I selected the "Select a system image" option and then select the correct image of Windows 10.
Then, I select the only available option for "select the date and time of the system image to restore.
After that, there is a message that says "for the restoration of this computer, needs of Windows to format the drive that the Windows recovery environment is running on." To continue with the restore, shut down this computer and it boot from a Windows installation disc or a disc repair system, then try the restore again. "At this point, I have no way to continue.
Even if I plug the USB recovery drive we used, I get the same message. I don't know what the problem is or how to get past. Any help is appreciated!
Hi Ryan,
According to the description, you can not install updates and the this issue may occur if one or more of the following conditions are met:
- The Windows Update database is damaged.
- Antivirus software is configured to scan the folder % Windir%\SoftwareDistribution.
- Service (BITS) Background Intelligent Transfer Service does not receive a content link header.
- A required system file is incorrectly registered.
Try it out below mentioned methods and see if it works for you.
Method 1
First of all, I suggest you run Windows update troubleshooting tool to get the problem automatically detected and corrected. This fixit checks the configuration of the Windows Update components and repairs, fixes incorrect Windows Update the locations of data and records of necessary services. For the race, the troubleshooter refer to sub article what can I do if I have problems to install updates.
Method 2
I suggest you to check if you are able to access Windows Update services and also make sure that the following services are started. If it is not started, follow the listed below as follows:
a. press the Windows key + R, type "services.msc" (without the quotes) in the Run dialog box to start, and press enter.
b. Locate the Windows Update service.
c. right-click on the Windows Update service and select Properties.
d. in Startup type, select enable.
e. click Start under Service status.
f. click OK.
g. Repeat steps c to f for the following services :
CSP & Background Intelligent Transfer Service.
If these steps do not help to solve the problem, you can proceed to the step below and check.
Method 3
If the problem persists I suggest to reset the Windows Update components and for this, try to run the fixit described in the following article. If you already tried the fixit even before that I ask of you rerun the fixit.
How to reset the Windows Update components?
http://support.Microsoft.com/kb/971058/en-us#LetMeFixItMyselfAlways
Keep us.
Kind regards
-
Does anyone have an email from the Adobe Connect of the trial with broken links?
I just filled out the form for the captain and when the enamel of the trial came with instructions, he had broken image links and the link to the site of the trial when a site Web missing.
A few times the trial notification emails can be sent until the account is fully implemented. The link to your account should work within 24 hours of the email sent.
-
I am reasonably familiar with DW - MX V 6.0 on Mac, but this one left me speechless. Maybe I'm not as familiar as I thought?
My wife got a new machine and did a lot of file and folder rearranging but no change of name. It broke every image in three of its sites. The code for the correct files points. I tried to remove and rebuiling site maps, but it does not help. Even remove the images of the pages and re - insert won't bring them back. This morning I went in its prefs and changed the window "icons and text" INSERT "text" and even the images of the icon are broken. It seems that no matter where I should get a picture, all I get is the broken image icon.
Any ideas on what I need to do to fix this?The path exists. Even with new images in the new pages would not work.
We trashed the entire application. He was not more effort - worth three days was enough.
-
How can I restart firefox with the same tabs and windows?
How can I restart firefox with the same tabs and windows?
It is not in the file menu or tools. I get nothing when searching for help. FF still knows how to do it, say to update extensions.
I know that I can do by saving my session, coming out, reboot and restore the session but is there a single command to do this?
Thank you. -David
I have attached a screenshot showing how to select restore automatic session just above the setting of the Home Page where it says "When Firefox starts".
With this set, you can restart Firefox manually out using the menu-
- "3-bar" menu button > button "power".
- (menu bar) File > Exit
-and then restart Firefox.
If you want a real reboot with a click of button, you can check something on the Add-ons site: https://addons.mozilla.org/firefox/
-
I opened emails with many images. New version is having a problem opening a tab with images more than maybe 6 or 7. Of older versions sometimes had the same problem, but the images unopened is appeared on the page as a small box empty you can try to reload. No more. Now you must reload the tab all. Sometimes it works sometimes it doesn't.
You seem to be using a beta version. Maybe go back to a regular version and wait for V. 30 becoming a regular version, and maybe some bug.
-
Hello
I am stuck on this program, I can't seem to understand.
can someone guide me in the right direction please.
I did this program, and it is properly take a reference image and other images rotated and attract crosshair while the images are shot.
It works.
but when I put a COLOR image instead of the image in grayscale. It does not work. It gives me the error.
can someone help me with this please
I have to build the vision of this script Wizard
It seems to work with grayscale images and not the COLOR PHOTOS.
What can I do to make this work?
I need to work with images like this and I have to call reticle around the BLACK POINT on the left corner.
I also have a sample VI created vision Assistant?
In the wizard of vision follow this
This, if your original image is a RGB one.
Maybe you are looking for
-
Satellite L755-1HW: problem of Intermittent Wireless with Sky router LAN
I recently bought a L755-1HW Satellite from a dealer is seller renovated, but a condition of work entirely, after factory reset. I have trouble picking up my sky router (home network). It will pick up my iPhone when used as mobile and is access point
-
Error recovering files and I need to install installation directory Extender player
"Question: how to fix this problem: a sign keeps coming up saying:" recovery error file and I need to then how should install Drive Extender for the installation directory", I do this?
-
Most recent game crashing almost immediately on the launch titles.
Just got a new system. The old songs that I installed (WoW and Crysis) work very well. Three new titles that I bought (Dragon Age, Just Cause 2, BF:Bad Co. 2) crash almost immediately on launch. I'm afraid to buy new software that I'm afraid that t
-
This is the message: Windows cannot find C:\system32\rundll32.exe. Make sure you typed the name correctly and then try again. I get this when I open the control panel and try to use some of the tasks. This problem started to has occurred just after a
-
I still have a problem of my printer with a new router connection. My printer is a HP Photosmart B110 series. I don't know how to get the printer connected to the system. I was able to add the printer, but then get an error message to print the test