Anthony printer

Similar Questions

• printer Envy 4504: envy - 4504 printer

  I just bought a HP Envy 4504. the first document I sent to the printer has been a problem.

  the paper continues to print without interruption. more than a 100 pages should be printed. There is a botton cancel on the printer Panel, but pressing it doesn't make any difference. no other print jobs print only the first task that has been sent to the printer.

  are there any action on the computer screen that I can go to cancel printing or to see the queue?

  Hey @paul-anthony,.

  Welcome to the Forums of HP Support!

  I would like to help you today with this copy multiple print jobs which continues to print from your HP ENVY 4504 e-all-in-one printer.  However, in order for me to provide you with a precise support today, I must say if your printer is connected via a USB Câble connection or the network connection to your computer Windows 10?

  What is important is because it will help us to identify this problem. If networked, the router can constantly send the signal 'print' your printer to print several times that the job. If USB connected, the print job may be "stuck" in the print spooler on your computer and which is the cause of print without interruption. The print spooler is the printing system integrated into Windows computers. It controls all of the printers for printing, regardless of the brand or model. The print spooler to be corrupted, impression of the problems, as you are having, can occur.

  NOTE: To cancel the print jobs to the computer, if a print job in the print queue you will see the printer icon on the task bar of your computer down at run time. Double click on this icon to view the print queue and cancel the job manually. If no icon print, open devices and printers. Right click on your HP Envy. Left click on see what's printing. The print queue is now open.

  For now, please power OFF your printer. If networked, can you please disconnect the power cable from your router. If connected via a USB cable, please unplug the cable USB from the printer and the computer.  Once disconnected please follow the steps below to ensure your computer's Print Spooler Service.

  • Step 1: Check print spooler:
  1. Click Start
  2. 'Ask Me anything' enter run.
  3. Click Run to launch the run dialogue box
  4. In the run box, type services.msc and click OK
  5. When the Services window opens scroll down until you see the print spooler
  6. Click Print Spooler once just to highlight
  7. If you Start in the upper left corner that indicates that your print spooler is actually stopped (not good). But we will leave that for now.
  8. If you stop or restart in the upper left corner, this indicates that your print spooler is actually started. Please click on stop to stop the service momentarily.
  9. Reduce this window which will allow us to come back here
  • Step 2: Check the spooler folder:
  1. Reopen your splash screen
  2. Computertype. Click on the computer (or on This PC) when it fills so
  3. In the computer window, select your Drive C
  4. Click on Windows
  5. Click on System32
  6. Click on the reel
  7. Click PRINTERS. You can get permissions to a warning, just continue beyond that.
  8. PRINTERS of the folder must be empty. If there is no file here, they are corrupt print jobs. Right click on anything in that folder and 'delete' files.
  9. Close the PRINTERS folder
  • Step 3: Start Spooler and audit dependencies: 
  1. Open the Services window we previously minimized
  2. Click print spooler to highlight
  3. Click Start in the upper left corner. If you get an error message please take note of it
  4. If the print spooler starts successfully you will see "stop and restart" as your options at the top left
  5. Close the Services box

  Once the print spooler has been started, please turn on your printer. Then, plug the router or connect the USB cable. The printer must stay in the ready state. If the printer is in ready state, please send a test print from your computer to your printer.

  Please reply to this message with the result of your troubleshooting. If the problem persists, please specify how your printer is connected to your computer. I look forward to hear from you!

• FRX Drilldown Viewer Error Message When you try to change the destination printer

  Hello, I have a bit of staff (I'm just technical support) which is affected by the following error message when they try to change the printer output

  in FRX Drilldown Viewer: "error: 0 Cccurred in: APIPrintCommonDialog().

  I hope that some useful information about the system:

  They use the application of visualization FRX exploration down in a Citrix XenDesktop environment. It runs on Windows Server 2008 R2, Enterprise Edition (SP1).

  The OS is a 64-bit version with 8 GB of RAM installed.

  Please feel free to respond with any need for additional information. I tried to search the event logs, but was unable to find anything of use... maybe

  could someone point me in the right direction, it?

  Thank you very much!
  Anthony

  Hello
   
  Thanks for posting the question.
   
  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.
   
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

   

   

  I hope this helps.

• "Windows failed to start the service on Local computer print spooler. Error 1068: the dependency service or group could start. »

  I fiddle with my startup programs and now I have this error message: "Windows could not start service on Local computer print spooler.  Error 1068: the dependency service or group could start. "There is no printer listed everywhere and nothing works.

  Hi Jkoryzna,

  Thank you for choosing the Microsoft Answers forum.

  To solve the problem, fix the dependency for the spooler service information.

  Click Start, run and type the following text:

  CMD /K SC CONFIG SPOOLER DEPEND = RPCSS

  Alternatively, to achieve this by using the Registry Editor:

  Click Start, run and type Regedit.exe

  Navigate to the following branch

  HKEY_LOCAL_MACHINE-SYSTEM-CurrentControlSet-Services-spooler

  In the right pane, double-click the DependOnService value

  Delete existing data and then type RPCSS

  Close Regedit.exe.

  
  REGISTRY WARNING

  Change the settings of the REGISTRY can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the REGISTRY settings configuration can be solved. Changes to these settings are at your own risk.

  Navigate through the steps mentioned in the article below.
  Solve printing problems by resetting the print spooler.

  http://support.Microsoft.com/kb/2000007

  Let us know if this helps

  Concerning
  Anthony.

• Photos printing off center

  All of a sudden, when printing photos, whether it is a 4 x 6 or 4 on 81/2 x 11 print about 1/4 in the left.

  Hello

  Welcome to the Microsoft Answers community.

  This happens with all the pictures?

  Through which application are you trying to burn the view and burn pictures?

  Do you use a third-party burning software to burn these photos?

  You have the same problem with other files as well?

  How long have you had this problem?

  Provide us with the above information so that we can help your best on your question.

  Concerning
  Anthony.

• Vista takes network offline printer

  Vista continues to disconnect the network printer. I have uninstall and then re-install the printer in Control Panel. Never had this problem with XP. It is not the network, because I can print from our cell phones. All the drivers are installed and up-to-date. The printer is a HP Officejet Pro 7780 All In One.  It's very frustrating.

  Is there a solution to this problem? Thank you

  Radioherb

  Hello

  (1) make sure that the file and printer sharing is enabled.

  (2) If you are using a computer connected to a "working group", click on the arrow next to password protected sharing to expand this section.  Check if password protected sharing is enabled or disabled.

  If the password sharing is enabled, only people with a user account and password for this computer will be able to access your printer. Disable this option if you want anyone on the network can access the printer you share unless you give then a user account and password.

  Install the printer driver

  Use a driver downloaded from the manufacturer's site to install the printer

  1. If you use the downloaded driver, double-click the downloaded file, then click on 'run '. The file will then be extracted and start the driver installation.

  2 follow the prompts and continue with the installation until you reach the Setup completed screen appears.

  3. on this screen, check the "Select" printer port box, and then click on the manual button 'Selection '.

  4. Select "" LPT1: port local printer ' and click on 'OK', then click 'Finish'. "

  5. in the Printers window, right-click the printer icon and select 'Properties' (access to the Printers window)

  6. click on the tab "Ports", and then click 'Add Port '.

  7. Select "Local Port" and click "new port" button.

  8. Enter the name of the port using the XP computer name and the name of the printer in the \\ComputerName\PrinterName form and then click 'OK '. Close the Port name window.

  9. click on 'Close' in the Printer Ports window.

  10. the new port poster now as being selected. Click "close".

  11. click on "Install driver" If the following window appears. You are now ready to print.

  Another thing is to make sure that if the firewall windows is that there is an exception specified for sharing files and printing.

  Make sure that all the computers are on the same workgroup. By default, XP machines are set to "MSHOME" while Vista machines are set to "WORKGROUP". They should both say WORKGROUP.

  
  Troubleshoot file and printer sharing
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-file-and-printer-sharing

  Network printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-printer-problems

  Let us know if this helps

  Concerning
  Anthony.

• HP printer/vista usb

  I need assistance with my vista. receive the software load for my hp c4580 printer it stops all of my USB and it won't work Anthony I reboot the system

  Hi tj2010,

  Did you follow the steps I have provided?

  Follow the steps mentioned in the previous post and let us know if it works.

  These measures help

  1. connect the printer to the different port to eliminate damaged the USB port.

  2. connect the printer to another computer to eliminate the bad printer problem.

  You can check with HP to known problems

  http://welcome.HP.com/country/us/en/contact_us.html

  Thank you, and in what concerns:

  Ajay K

  Microsoft Answers Support Engineer

  Visit our Microsoft answers feedback Forum and let us know what you think.

• VistaHP v Brother Printer Offline

  MFP was working perfectly before the new year - post 4th Jan, to keep partial printing and scanning, only of advising offline or unable to communicate, try to turn on!  Of course the printer and the scanner on and connected according to the brother diagnostic tool.  Manuf. reset, download new drivers for devices, Wi - Fi connection reset and restore try Windows earlier - no joy!  Suggestions welcomed.

  Hello

  Welcome to the Microsoft Answers community.

  The same thing happens with the test page?

  Here are the steps to print the test page.

  You can print a test page to check if a printer to print graphics and text correctly. A test page also displays information, such as the printer name and model driver software version, that can help you troubleshoot printer problems.

  1. open Printers by clicking the Start button, clicking Control Panel, hardware and sound and then click Printers.

  2 right-click the printer that you want to test, and then click Properties.

  3. on the general tab in the printer properties dialog box, click on print a Test Page.

  Print a test page
  http://Windows.Microsoft.com/en-us/Windows-Vista/print-a-test-page

  Also, try to run the automated tool fixit included in the link below and check if this helps solve your problem.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems

  Let us know if this helps

  Concerning
  Anthony.

• Selection of the printer when printing

  When I try to print my printer coupons goes to my photo printer not my regular printer.  How can I resolve that I'm not great to change things by myself.

  Hello

  The same thing happens with other files as well?

  Have you had this problem before?

  What changes were made before this problem?

  Since it is a problem with the coupons, you can also try to change the default printer in the coupon software. The application must have this option where you can change the default printer.

  Have you tried to change the default printer in Vista?

  1. open Printers by clicking on the button start the picture of the Start button, clicking Control Panel configuration, hardware and audio, and then click Printers.
  2 right-click the printer that you want to use and then click on set as default printer. A check mark appears on the printer icon to mark it as default printer.

  Change your default printer
  http://Windows.Microsoft.com/en-us/Windows-Vista/change-your-default-printer

  Concerning
  Anthony

• Printer will not work after uploading NT4.0 on Vista 32-bit

  I tried to fix my Media Player, it stopped working when I try to open the wmv. e-mail files and came across something for nt4.0 driver so I down loaded to vista Home premium. Now I can't use my printer, I get the error message "driver not compatible a policy enabled on your computer that blocks NT 4.0 drivers (1930).

  Hello

  This problem occurs because Windows Vista does not support the installation of kernel-mode printer drivers. Windows Vista only supports installing user mode printer drivers.

  To work around this problem, try to get and install a printer driver as a user on the Windows NT 4.0 computer. If you can not get the particular user mode printer driver, try to get a driver printer in user mode compatible with the kernel mode printer driver which is hosted on the Windows NT 4.0 computer. To get a printer driver updated for the print device, contact the manufacturer of the printer.

  For more information about your hardware manufacturer, visit the following Web site:

  http://support.Microsoft.com/GP/vendors/en-us

  Microsoft provides third-party contact information to help you find technical support. These details may change without notice. Microsoft does not guarantee the accuracy of this third-party contact information.

  For more information I suggest you access the link below.

  http://support.Microsoft.com/kb/931719/

  Concerning
  Anthony.

• Print PDF from Illustrator CC

  I often open the PDF files of the customers with the Illustrator to modify when the pagination or page position is incorrect.  I did this in Illustrator for many years without problem, but since the upgrade to CC, Illustrator invariably closed unexpectedly when I try to print.  Sometimes the impression actually goes to the printer, but I must restart Illustrator CC and reopen my case to continue each time.

  I use:

  Illustrator CC 18.0.0

  Mac OS X Mavericks (10.9.4)

  iMac 27 "3.4 GHz Intel Core i7 with 20 GB of RAM

  Xerox color 550 (with 550-560 Integrated Fiery)

  Any ideas?  Anyone else having this problem?  Any advice would be much appreciated.

  I can be emailed at [email protected] and.

  Thank you.

  Hi Anthony,.

  With the last update AI CC 2014, this problem has been resolved. Please update the AI CC 2014 application using the creative application Cloud (for update exit & restart CC app).

  Please update the thread with your conclusions.

  Kind regards

  Rambour Singh

• Brother printer wifi "the printer is unresponsive.

  Hello

  I'm new to Mac but am generally competent computer/network.

  My son is in a the student house where 2 guys have Macbooks and 2 have Windows Mobile 10. the printer is a Brother wireless printer/scanner/fax.

  Among Mac users and Windows users can send impressions and analysis perfectly, but only one of the Mac users cannot.

  I deleted the printer and downloaded the latest drivers and re-installed but still cannot print.
  I tried adding via IP address but still does not work. I also tried the Air and BrotherCUPS, but none worked.

  HELP............!!!!!

  Greetings thequizman,

  Thank you for using communities of Apple Support. It seems that you experience problems printing to a Wi - Fi printer. Looks like you already have a troubleshooting. I recommend reading this article, you have already done some steps here, but there is more information you have not mentioned by train.
  
  

  If the issue is not resolved, take these last steps to remove all the drivers printer currently installed that might be causing the problem:

  1. Choose  menu Apple > System Preferences, and then click Printers and scanners.
  2. Control-click anywhere in the list of devices, and then choose "Reset printing system" from the context menu that appears.
  3. From the Finder, choose go > go to folder. Type /Library/Printers/ , and then click surGo.
  4. The Printers folder opens. Choose Edition > select all to select all the items in the folder.
  5. Choose file > new folder with selection to all the selected items in a new folder named new folder with the elements.
     To save storage space, you can delete the folder new folder with items after you complete the remaining steps.
  6. Follow the steps described in previous section once more.

  If your printing problem is not resolved, contact the manufacturer of the printer to support.

  Troubleshoot printer on your Mac - Apple Support

  Take care.

• print labels easy without using Contacts

  Print the sheet of labels with different addresses with Word for Mac

  Is this a question?

• Printer Driver HP LaserJet 6 p file

  I'll try to find a driver file for my HP LaserJet 6 p printer, it worked great until I upgraded to MAC OS Sierra

  Thank you for your help

  Try to configure your printer according to this instruction, the problems of printer on your Mac - Apple Support

• How to solve printing problems after update OS Sierra

  After the OS Sierra update, some of my files can not print from my printer. The message showed "internal error - an untrapped exception was raised. Choose 'continue' to continue execution in an inconsistent state. Choose 'Crash' to terminate the application and fill out a bug with Crash Reporter report. Choose 'Crash' will result in the loss of unsaved data. "Despite having chosen the above options, there is still nothing happen on the computer.

  Is there a way to fix this?

  Install a printer driver updated - check the site of the manufacturer for compatible drivers Sierra thew.