Conversion of Standalone put in Cluster Mode of interconnection fabric UCS

Similar Questions

• How much time does it take for my ipod to connect the itune after putting in disc mode?

  How much time does it take for my ipod to connect the itune after putting in disc mode?

  my ipod displays 'do not disconnect' for half an hour already, but my itune cannot always detect my ipod (as itune will pop up once I have connected my ipod normally).

  What is your real question?  Why you connect the iPod to your computer to disc Mode?

  In addition, it would be useful to know if you are using a Mac or a Windows PC?  If Windows, what version?

  If iTunes does not open automatically (when you connect the iPod), what happens when you run it manually?

• Screen: For several days my laptop screen not turn off after a period of time, of no use. I have to put it in mode 'sleep' me or there is 'on '.

  For several days my laptop screen turn off after a period of time, of no use.  I have to put it in mode 'sleep' me or there is 'on '.  What happened to cause this?

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  Try to reset the default power Plan settings. information is at the link above.

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

  And how to solve problems in Standby Mode is at the link above.

  And read the information of 'Related links', too.

  See you soon.

  Mick Murphy - Microsoft partner

• Is set in cluster mode for a PV220s "sharing"?

  Hey all,.

  For some time I have approached anything with the PV220s (only because its been itself features news!) but is considering a change in the current configuration.

  Currently, table is linked to a single PERC controller and lapping joined bus mode using all the discs 14. I think to do sets up another server connected to the second EMM and share the whole.

  This will happen because I do come aboard another server on the current workload and you need to move the databases.

  I have the following questions: -.

  1. If I understand correctly, a disk will be lost. This can then be configured as a hot spare or physically disconnected?
  2. This configuration is as simple as turning off the power, press the switch cluster mode and reboot all servers?
  3. It would be preferable to use instead the split bus?
  4. Choice of the mode of bus on the fly would cause data loss?

  As I said, its been a while that I have drawn on the PV since its been working fine. Maybe I shouldn't touch something which did not gave no problem, but I could do with the help of better space between the 2 servers.

  See you soon,.

  Pop

  
  

• SFR in license cluster mode?

  If I run two ASAs in cluster mode, is there a special setting that I need to do on the modules of sfr?

  The pair of cluster ASAs forwards traffic to the two modules of sfr?

  Documentation is very vague on the subject of sourcefire, clustering, everything he says really is to "maintain a coherent policy on the modules of sfr and do not use areas during your period.

  Are there additional licenses required? IE I have control of x 2 + protect however only 1 AMP / URL license

  Does this mean that only SFR modules can process the malware and URL filtering?

  Any help would be greatly appreciated

  Thank you

  Are you running the ASAs in a pair of Active-Standby HA with module of firepower on each of them?

  If so, the licensing of the modules must match each module. Otherwise, you will not be able to appply URL filtering and policy file (AMP) on one of the modules.

  If the ASAs are truly in a cluster 2 nodes (not active-Standby) so it is even more important that licenses match because only by flow of traffic can take another Member as a transfer device.

  Ideally simply build you a set of policies in the Management Center FireSIGHT and apply them to two modules of firepower.

• IPod 160 GB Classic is stuck on the apple logo. I have reset several times and I can not put in DFU mode or resets it to take. Done all the help topics that I have seen here and nada... Please help

  help me get the apple logo take off. I reset it, tried and failed to reset. I can't put it in dfu mode. I'm stuck and need help pease. I did everything that was mentioned in other posts similar to this issue.

  That may mean the iPod has a hardware problem, such as a faulty hard drive or the logic board.

  When you do a Reset (press and hold the Menu and Center buttons), going blank at the start before the Apple logo returns the screen to the iPod?  Or do you mean that the Apple logo is 'stuck' and it doesn't go away when you try of the reset?

  Is the "DFU mode" procedure for disc Mode.  Have a look here to confirm that this is what you have tried

  How to put your iPod in disc - Apple Support mode

• Re: M Series Equium died when put in normal mode

  Hello

  Laptop was working fine last night to what I put it in normal mode. Since then (and maybe it's not related) when I press the switch on the fan starts with the initial burst, whirs the hard drive and the lights turn on but the screen remains blank and then nothing happens. It does not start even in the bios or the logo screen.

  The hard drive is fine after having tested on another machine, it just seems to be the portable real. Any ideas to save a new laptop having to buy?

  Thank you

  Hello

  > but the screen remains blank and then nothing happens. It does not start even in the bios or the logo screen.

  The possible reasons are a graphics card or display malfunction internal. Connect the external monitor to check if you can see what it means malfunction internal display. Otherwise, it's a graphics card related question.

• Cannot restart; Function F8 does not work; stuck at "restart windows." Put in standby mode.

  Put the PC into standby mode.  Stuck in the status of "Recovery of Windows".  Impossible to restart.  Power off several times.  F8 doesn't work no more.

  I don't think that XP shows a message "Windows Recovery" when it comes out of Stand By.

  It does when it's Hibernation.

  If you've been cycling power, you can have damaged your system files a bit and should probably start by running a chkdsk/r from the XP Recovery Console.

• Updated standalone Cisco Aironet lightweight mode Access Points

  I'm trying to convert a stand-alone Aironet 1200 in light Mode. I use the tool to upgrade v1.0 proposed by Cisco. But when I put the name of the recovery LWAPP Image (c1200-k9w7 - tar.123 - 7.JA2) in the tool window to update it doesn't work. It is said: c1200-k9w7 - tar.123 - 7.JA2 - LWAPP recovery Image file size is zero. But its size is 4.6 MB!

  Can someone help me?

  Convert the Aironet 1200 of autonomous light mode follow the procedure set out in document http://www.cisco.com/en/US/products/hw/wireless/ps430/prod_technical_reference09186a00804fc3dc.html#wp23144.

• VMware 5.1 with compatibility virtual RDM and Microsoft SQL Cluster mode

  Hello

  I am a bit confused by the VMWare documentation and hope someone can point me in the right direction.

  I want to know if it is possible and supported to create a cluster of SQL 2008 R2 2 nodes (Server 2008 R2 SP2 are VM) on a 2 node cluster VMWare 5.1 with the use of Virtual RDM compatibility?

  When you read the PDF on vsphere5.1 on the link below on page 9, there's a indicating note 'NOTE Clusters on multiple physical computers with no-pass-through RDM is supported only for Windows Server 2003 clusters. It is not supported for clustering with Windows Server 2008. »

  http://pubs.VMware.com/vSphere-51/topic/com.VMware.ICbase/PDF/vSphere-ESXi-vCenter-Server-51-Setup-MSCS.PDF

  So that means that I want "a 2-node cluster sql 2008 R2 server" is not supported?

  But I also found this link below and in the table of the column on the Cluster SQL line RDM is said 'yes' with a 2.

  VMware KB: Microsoft Clustering on VMware vSphere: guidelines for supported configurations

  Means 2/redirects-> for more information on shared disk configurations, refer to the Disk Configurations section in this article.

  -> Disk configurations

  • RDM: Configuration using a shared Quorum for storage or data must be on Fiber Channel (FC) based on RDM (physical cluster across boxes "CAB" mode, virtual mode for cluster in a box "IPC") in vSphere 5.1 and previous versions. RDM on storage other than CF (iSCSI and FCoE) are supported only in vSphere 5.5. However, in earlier versions, FCoE is supported in very specific configurations. For more information, see Microsoft clustering solutions table above note 4 .

  What follow-up note4->

  1. In vSphere 5.5, native FCoE is supported. In vSphere 5.1 update 1 and 5.0 Update 3, two cluster configuration of the node with Cisco NAC (VIC-1240/1280) cards and driver version 1.5.0.8 is compatible with Windows 2008 R2 SP1 64-bit guest operating system. For more information, see the VMware hardware compatibility guide:
     • Cisco UCS VIC1240
     • Cisco UCS VIC1280

  This means that it is suuported, I "m confused.

  Hi Bypy,

  Two windows 2008 R2 SQL virtual cluster nodes with RDM is supported only for the IPC or Cluster In a Box that is to say if the two virtual machines reside on the same host ESXi. The same configuration is not supported for the cabin or Cluster across boxes (virtual machines running on different hosts ESXi).

  The CAB, you go for the physical RDM mode.

  According to this link, http://kb.vmware.com/selfservice/microsites/search.do?language=en_US&cmd=displayKC&externalId=1037959

  SQL Cluster using windows 2008 R2 is supported for both physical and virtual mode RDM. Between physical and virtual mode depends on whether you want the CAB or IPC respectively.

  I hope this helps.

  See you soon,.

  Arun

• VM and cluster mode CVS do not match

  My group is in AMD Gen 3 mode but I have a handful of virtual machines to the bosom of this cluster that are somehow ADM Gen 1 mode, so that they cannot be vmotioned hot.

  Is there a way to change that many vms EVC mode machines are turned on?

  The host runs 3.5 ESXi and VCenter is 4.1

  Thanks, jb

  Try the steps if you have below

  1. turn off power the virtual machine.

  2. click on the link change the settings of the virtual machine.

  3. click on the Options tab.

  4. Select CPUID mask under Advanced.

  5. click on advanced.

  6. click Reset all to default.

  7. click on OK.

  8. click on OK again.

  9. turn power on the virtual machine and migrate.

• Yet cs5 put computer in mode 'sleep'

  Hey all

  new to the forum and need a bit of help please

  I recently updated my creative suite cs3 for the new Master cs5

  I'm not a photographer and don't do a lot of video.

  Recently, I decided to teach me wih a lot of tutorials for use first pro and more.

  I managed to do a project with first that satisfies me and I just wanted to export to dvd

  so I send to again put the project in the timeline panel, and set the end action of Chapter 1.

  then I choose generate and check the settings I want.

  now after about 3-5 minutes to still make something that's the computer simply goes to sleep and no way to wake him up.

  I have put all my power on hard drive options, screen, processor etc. never go to sleep and it still happens

  I even let him turn while doing other things on the computer and it still goes to sleep.

  my machine

  Windows 7 x 64

  Intel Core i7

  NVIDIA 9800gtx +.

  12 GB of ram

  WD raptor hard drive

  I'd like to think that my computer specs are reasonable and should not be the cause of the problem.

  I mention also that the suite CS5 has been installed on a clean install of windows.

  would apretiate really any help as this is driving me crazy. I did a search on google but have not found answers to my problem.

  Find many discussions about still not launch and crashing, but I did not have this problem... just the darn thing go to sleep

  Thanks in advance

  I read these forums since first 6 and only "close" messages that I've seen are where there is a hardware problem and stress of video encoding (power draw and heat, usually) caused this material weakness so that the computer off

  I have no idea as to why or how could still put a computer in mode 'sleep'... but the power and/or heat from the CPU could do a computer is turned off

• motor control not to no - heat - how to put in a mode to limit the dissipation of heat from the drive?

  Hello

  I use a system using a SMU with 2 Motors step by step NEMA34-6, driven by the readers of SMD-7621.

  The system needs to be powered 24/24 7/7.

  Most of the time, the engine didn't need to spend...

  It seems that the engine still somehow braking mode 'active', and the player constantly dissipate heat, even if no movement is required.

  I measured the temperature of the steady state of the reader, who is around 50 ° C, measured on the heat sink aluminum.

  It is safe to have the drive constantly at this temperature, 24/24, 7/7?

  Is it possible to move the reader into a kind of mode 'sleep', when no movement is required by the control? Would this mode, if it exists, decrease the temperature of the drive?

  I control the system using Labview on an SMU using a surfboard OR 73xx, so this mode should be controlled via the code of Labivew, in which I could detect situations when I will not have to move the engine more...

  Any help on this will be greatly appreciated.

  J.F.

  Yes, this is the setting you should change.  This player is actually a player movement applied Productss.  I do not know how critical it is to keep your position.  It is possible to lose the position a little bit if you go all the way up to 0%.  For example, if you use microstepping, and you reduce the current to 0, the engine could jump to the next full step.

• The computer automatically turn on when put in standby mode.

  June 15 after having installed the Microsoft updates my computer would turn on itself at various intervals. That's when the computer was in sleep setting. I worked with Technical Support Dell for three days with success and finally we took my computer back to factory settings. The computer is in standby for a day and a half with the come. I then installed all updates from Microsoft to update the computer. At this time the computer started again back on itself while in mode 'sleep'. He doesn't know when to stop. I have Vista Home Premium

  Hi crcn84,
  Try disconnecting all USB devices to see if that it stop.

  In addition, reinstall the drivers for your NIC manufacturer.
  Check your BIOS and see if there is a setting for the network card that says something like "Wake on LAN". Disable is turned on. You can also check the settings for USB legacy. Change the opposite of what it is now, if it exists.
  Let us know how it goes.

  BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can resolved e. Changes to settings are at your own risk...
  Matt
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to change an effective policy in host and Cluster mode?

  HI -.

  I struggle to change policy effective default on 'Custom' in vCOPS host and Cluster view.

  I notice that I can go to the view of the group, create a group and associate a strategy with the group.
  But I don't want to use groups. I like the host and Clusters main view and prefer to be able to change an effective policy on a live cluster from this point of view.

  Possible?

  Type r

  Björn.

  Hello Björn.

  Only groups can be used to associate a policy customized to objects.

  Thank you

  Alex D.