shading of a triangle (gradient of 3 vertices)

Similar Questions

• Horizontal gradient

  Is there a way to make the gradient from the bottom of my flex application that is horizontal? The application I'm developing would look better on my site with a horizontal gradient and not vertical. I guess that hacking the code framework for background drawing application would do the job, but I want to avoid this, if possible.
  
  In any case, if this is not possible, then I think it would be useful to create a style for the application (and probably other objects aswell) select the type of gradient that you want to use.

  OK, I solved this by creating a gradient swf image and set it as my FLEX application background.

• HP G62 nOTEBOOK 144DX: driver for keyboard filter HP G62 Notebook 144DX

  On the Control Panel, there is a yellow triangle with a black vertical line through it next to my HP G62 Notebook 144DX.  When I right click on it, I get the message "Keyboard Filter is not a pilot.  How can I get this driver for keyboard filter?

  Hello

  Download and install HP Quick launch on the following link buttons.

  http://ftp.HP.com/pub/SoftPaq/sp49001-49500/sp49104.exe

  Kind regards

  DP - K

• How can I start using ACR?

  I've been reading for the last hour & can't find info on how to start using ACR.

  I can't find how to open!

  Can someone tell me how to start? Please, I beg you.

  I'm not sure what you mean, but every time you open a RAW file in Photoshop or PSE ACR filter is used to open it, or indeed, you can open a JPEG, TIFF etc. of the bridge using ACR.

  If you mean ACR 8.1 final candidate, even if it will work with CS6, it is important to note that there is no support for the radial gradient tool, "automatic vertical" tilt / tilt correction, new stain, vignetting, or using Camera Raw itself as a filter unless you have a subscription to Photoshop CC

• Triangulation in the jargon

  Hi people out there. So is all hid or surprisingly obvious methods in Shockwave 3D to triangulate non convex polygon with n sides? A form of it is called of Delaunay Triangulation, but there are other methods as well. I'm about to embark on a journey to create in the jargon (i.e. potentially in a xTra), but I hope that there is already a solution out there.
  
  Thanks in advance for any help
  David Gilardi

  Hey there Hondo. OK, I was able to create an Xtra triangulation, but I can't release the Xtra to the public. What I can do is say that. I used the C code generated by ngaya and Matis based on the algorithm of Seidel. This can be found here:
  http://www.cs.unc.edu/~dm/CODE/GEM/chapter.html. A great resource for anyone who manages the 3D programming is here: http://compgeom.cs.uiuc.edu/~jeffe/compgeom/. I was able to incorporate their code into a Xtra without change in other implementation that linking them. In general, this Xtra enables a set of points counterclockwise (cancels the order if not needles) to return a set of triangles without adding any vertices. This means that for those who are struggling with Nonconvex irregular polygons created dynamically you can send the Xtra the outline of the points and get new traingles you plugin just in your faceList to the generation of mesh. It is rather easy and simple, once implemented and can triangulate a polygon even with holes as long as the input data are trained properly. Unless we create an object in an external program and Director imports I don't know anyway to make otherwise, especially when running.
  Anyway, if someone takes a hit to this public use feel free to ask me about it.

  Have fun
  Sonic2004

  BTW: I want to thank ngaya and Matis to go through the trouble to implement alogrithm of Seidel in C. From my point of view, it is not trivial.

• Vertical dotted lines and bad shading on Satellite P30-109

  Hello

  Sorry for my bad English,
  I have a problem TFT on my Satellite P30-109.
  Regular vertical dotted lines and bad shading.
  I formatted the disk with the recovery disk, but nothing has changed.

  An irregular viewing is present during windows startup.
  What can be?
  Have you any suggestions? I have to throw my PC?

  Thanks for your help.
  Stefano

  Chain is quite right. If the same thing happens on an external device there is problem with the video card and probably the whole motherboard must be exchanged.

  Sorry, but you must contact partner authorized in your country. If you need address, you can find them under http://www.csd.toshiba.com/cgi-bin/tais/su/su_gaspLocator.jsp?pf=true

  Good luck!

• Three vertical gradient color Muse

  Hi all

  I want to have a background gradient in Muse. I found there was a very simple way to do it, but I can choose only two colors.

  My client wants to have a three colored vertical gradient background, is it possible in Muse?

  The top should be black, black to turquoise in the middle and back to black again once downstairs.

  I know there is a way to add a picture to the background, but I think it will make my site very heavy and bulky to load, and it must stretch and shrink if browser varies in length and width.

  I have the HTML script for this kind of gradient, and I know that I can add an HTML element in Muse, but I don't know how it works for a background.

  I hope someone can help me!

  Thank you!

  Caroline

  Hello Sir,

  According to the guidelines of the muse works only two colors can be used to create a gradient. Although you can create Gradient in Photoshop using more than three colors and later versions, you use the image created in the Muse.

  Kind regards

  Nitin Kapila

• Vertical gradient of CSS3

  Hello

  I'm breaking my head trying to understand this one... CC how to create a vertical gradient where the color flows from top to bottom, it is heartbreaking as a repeating pattern in dreamweaver.

  Here is my css:

  {body

  background-image:-webkit-linear-gradient(270deg,rgba(0,0,0,1.00) 0%,rgba(255,0,0,1.00) 100%);

  background-image: linear-gradient (180deg, rgba (0,0,0,1.00) 0%,rgba(255,0,0,1.00) 100%);

  }

  

  You could save a lot of head bumping by visiting this site then copy and paste the code in your CSS:

  http://www.ColorZilla.com/gradient-editor/

  Different browsers require gradients to be encoded differently, but this site doesn't handle most, if not all of them.

• Help of the vertical gradient mask

  I'm doing a layer in a file appear gradually from bottom to top (like a pile of sand as you pour on the sand more increases). I mean, is that I know I could use an interpolation of transformation but which looks more and more larger rather than a building gradually from the base. Who is?

  I have tried everywhere and the UTU of for grqadient masks are terrible. Does anyone know where I can get a good tut on it?

  I want to do without! I'm afraid to give to me is like giving whisky to the er, native Americans; It is the PC that you're going to get...

  Thank you

  WLM

  I just had a look on the UTU again and I realized that I had done it correctly. The problem (if we can call it that), is that it will not show you the full effect in a scrub of the timeline. However, when I run a test swf you see smooth edge. Simply, you get a wisiwig in the timeline panel.

  Phew, that's a relief.

  Future note to self (and others): regular test run sovereign wealth funds - the things that you didn't know you did!

  Here is my file with the fade of rather soft enough edge mask: https://docs.google.com/file/d/0B-cQQhdwl3C-TWZOUWpQSzZTVGc/edit

  Kind regards

  WLM

• the gradient on pencil tip line to help fishing?

  Hello

  Did someone mind take a look at this? I want the tip to get the gradient

  more of a diagonal angle, but also keep the edge vertical shading.

  Know what I mean?

  I don't know I could do using 3D revolve, but hurts control my

  color when I use it.

  
  No work around?

  I guess I could pretend and draw a whitish feathers form is going at an angle.

  janepell,

  If I understand in the right way, wishing to create a transition between the center of the blade and the dark edges of the tip, corresponding to the gradient of the tree between dark and clear, you can:

  1. change the color of the tip to dark solid;

  2. create a narrow rectangle placed as a thin pale in the middle line;

  3 select both and oppose > blend > make, with smooth color (or a large number of steps).

• HP 6510 - areas shaded on scanned images

  When I scan an image or document using a HP 6510 scanned images are dark and shaded areas along the vertical edges of the completed scans. The cover is closed all the way and the shadows are not part of the original image/document. What could cause this problem and how to fix it?

  I have scanned hundreds of images with a C5280 printer/scanner and never had any problems with it. Since I bought the 6510, I didn't have problems with it, it's a true lemon IMO. Does anyone know if HP is planning a recall on this model?

  Resolved: The problem proved to be the scanner cover. It allows a small amount of light to enter along the edge of the hinge. After you verify that the lid has been correctly installed (tabs of hinge in place and the lid placed correctly in addition to glass) I found that putting something, like a book or my hand on top of the lid while the machine is scanning has solved the problem.
  
  I miss my old HP Photosmart C5280.

• 0 line ListBox and vertical scroll bar problem

  Hello

  I tried to do simple VI where I can check the items in the Listbox control. My problem is that when I click anywhere on the buttons with the triangles, the mouse down or the vertical scroll bar of the event triggers and check the item in the line 0.

  Is this a problem or is it just a mistake in the code?

  

  For some reason, I'm not able to fix VI, so block diagram is below.

  

  Thanks for any help.

  I use LV 2010.

  Duri

  Here's a demo VI, who manages the selection listbox like that with a single click.  Sauve saved in 2011, uses the OpenG table.

• How to get RMS to triangle wave

  I measure a signal voltage AC using a cRIO and 9206.  The signal is a triangle wave and I have to get the RMS of this triangle wave.  It seems that the average Cycle RMS VI in labview fact that sinusoidal waveforms.  There is an option between peak/histogram/auto when self gives a "reasonable response" to a triangle wave.  I need a better answer.   I can write a custom vi grabbing the vertices of the triangle wave, then dividing by sq.rt (3), but it's a lot of work.  Hoped that LabVIEW already had one scheduled.  Thanks for your help.

  -phdieum

  
  

• All icons are shaded and wavy after installation of the patch and restart (win xp sp3). How can I fix it?

  After you have installed the latest patches, all icons are shaded with vertical lines undulate on them.  Computers desktop and in Windows Explorer.  Application windows appear clear, but icnos in their midst are the same way.  What should I do to fix this anomaly?

  -J' tried the obvious desktop refresh. No change.
  -J' rebooted in safe mode, and then back to standard mode. No change.

  What else can I try?

  Hi JimGoode,

  Unfortunately, the screenshots are not available in the post.

  Given that the question does not appear in safe mode, then it is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then use SkyDrive download screenshots of icons.

  Use SkyDrive download collected files and after shot/screenshot.

  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65/

• When vertical, can not do taskbar as thin as the horizontal taskbar. Bug?

  I apologize if I'm redundant, but after asking around it seems that unanswered discussions are NOT open for review, so we are here ;)
  The original thread:

  "My task bar Vertical will not stay the right size, which is very thin."

  http://social.answers.Microsoft.com/forums/en-us/w7desktop/thread/b50f137d-F993-4c85-9708-f78d344263e4/?Prof=required

  Basically, you can make the taskbar is very short when it is at the top or bottom of the screen. But, if you decide to keep your taskbar on the left or right of your screen, it can not be reduced at least to double the minimum thickness, you can do it when it is on the top and bottom edges.

  In the thread original, a few posters that they are able to intermittently this thin, but after certain events (for example change resolution), it snaps back to the thicker size. This occurs even if the taskbar is locked.

  I used my taskbar in XP this way for years, and XP, it is possible to make the taskbar also skinny when lined up vertically. Please, oh please, this feature is possible available in Windows 7?

  Thank you!

  Paul

  It allows a smaller "hight" when horizontal is because each icon still has a large width, so it remains easily target-able with a finger.

  If it was useful, you can vote by clicking on the green triangle. If it solves the problem, click on propose as answer. Thank you!