HP 6510 - areas shaded on scanned images

Similar Questions

• I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously, I had started to put these in Lightroom but decided to change the line

  I want to use my Lightroom 5 to index my slide collection architects who are now safely scanned on my new Mac in the images folder in the Finder. Previously I had successfully started putting these in Lightroom, but decided to change the format of deposit and deleted (I think) all these previous efforts of Lightroom. On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  Robert alanb48311052 says:

  On my computer, now I would like to, but when I open Lightroom to try to import them from my computer, the Destination Lightroom Panel does not appear. What I am doing wrong?

  The Destination Panel does not appear? Try right click on one of the other names of Panel on the right side of the import dialog box and select Destination.

• HP MFP M277 dw: scanned image is not horizontal

  Hello

  I have problems with scanning.

  The scanned image is not right, not horizontal, the image / lines slightly tilting. The right of a line that is slightly below the line on the left. Looks like the book was a little twisted, but it's not. The left and right margins are straight and vertical, but the lines is tilted slightly.

  This occurs regardless whether I put the paper on the glass or using the paper feeder.

  My MFP is almost new, and this problem has happened all the time.

  / Paul

  @Paul_Sund

  Welcome to the HP Community Forum - we are a community of fans of HP !

  If you have not already done so, try setting "Calibrate" to help improve performance.

  The User Guideexplains the procedure on Page 121

  Calibrate the product in order to harmonize colors
  Calibration is a function of product that optimizes print quality.
  Follow these steps to solve the problems of quality of printing such as misaligned color, shadows, fuzzy graphics or other color print quality problems.
  1. on the product control panel, press the Setup button.

  2. open the following menus:
  ● System Configuration
  ● print quality
  Color calibration ●
  ● Calibrate now

  3. a calibration message appears on the control panel of the product. The calibration process takes a few minutes to complete. Do not turn off the product until the end of the calibration process.

  4 wait until the product is calibrated and then try to print again.

  

  If nothing helps, I suggest that you contact HP Support.

  Explain the problem and ask for options / help.

  HP Contact Information - sales, Technical Support, other Contacts - USA / Canada

  Fill out the form to receive the case number and Contact information

  Contact HP support - USA-

  Contact HP - including UK information

  HP technical support / Service delivery - some English Speaking countries

  HP global support

  Warranty check

  HP customer support - product warranty check

  Plans of optional guarantees:

  Enter your product number in the screen to view the different warranty plans available for this system:

  Care Pack Central

  Definitions (file may be slow to load in Firefox - Edge is faster...):

  Definitions of Care Pack Services

  HP Services to consumers (Service purchase information)

  1-866-724-8600

  When you see a post that helps, inspires, gives a cool idea.

  or you learn something new, click on the Thumbs Up on this Post.

  Fixed / responded? Click on the accept as Solution to help others find answers.

• Officejet8600: My scaner HP asked me to choose the area to be scanned

  My scaner want to scan to my computer, I get a message please select area to be scanned

  Hello

  Can you use Image Capture or Printers & Scanners?

  If the custom size option is enabled, you must select an area to be scanned.

  Try to uncheck this option and set the size of paper.

  For any question please specify what software you are scanning to.

  Shlomi

• Part of the image appears in the scanned image

  I have an officejet 6600 all-in-one printer.  Lately, whenever I try to scan the image is cut off.  Only a small part of the document appears in the final image.  The content is visible on the scanned image is in the lower right of the scanning space.  Please tell us what the steps should I take to solve this problem.  Thank you

  Hello Pierre,

  Welcome to the Forums of HP Support!

  I see you are trying to scan documents using your HP Officejet 6600, how ever you getting only a very small part of the analysis. What happens when you try to make a copy, the entire page produce on the copy?

  If the HP software, make sure that the scan size is set to sweep the area.

• line on scanned image

  I have an Officejet 6500 has more all-in-one. The machine works fine except for one question.

  When you are scanning from the document feeder only, all scanned images leave a thin black line running vertically down the page, exactly 1 inch from the right side. If the same page is analyzed by putting it on the flat, no line appears.

  Just to confirm, is this normal? And if not, what is the solution?

  Art

  Could not resolve the problem after the documents you pointed me to

  Called HP support

  The problem has been resolved by unplugging the printer/scanner to the surge protector power bar and plug directly into the wall outlet

  Very strange, but he has apparently solved the problem

  Art

• HP ENVY 4500: Scanned image appears in several parts of the whole.

  Hi people, for convenience, I'm going to number paragraphs describing my problem.

  1. any new product, which was to install a couple of days.

  2. the product prints and copy great and no problems. However, although yesterday I scanned a picture OK, now not so much.

  3. I hate to admit it, but I am 81 and my memory is not so great. Perhaps, I do not use the Protocol? Here are the details of the problem:

  4. when I scan using the screen of the printer the printer allows to scan that a good connection to my computer and an appropriate message is displayed on the monitor screen "Scanning". When parsing the result image is sent to the 'Documents '. So far, good.

  5. what analyzes all the I go to Documents and find the split image in ten 10 or more separate items and it would be a major task using PES or similar to the room together. In any case, would not be a solution, the photo scanning in a room, that's what I'm aiming for.

  6 but it is not the end of the problem. When I scan using the computer all scans correctly and is displayed in the preview window, which appeared on my screen. But the 'same' problem persists as above and the scanned image in appear in 10 or more parts at all.

  7. I don't think that there is nothing wrong with the product, rather I strongly suspect that I'm doing something wrong or maybe I misconfigured Setup.

  How can I fix this problem? What should I do to scan photos and documents as an image or a document and not 10?

  I'll be very grateful to help on this problem. Thank you very much. If you need more information, please just ask.

  Stehkoyeh.

  What follows is HPENVY4500 all_in_one printer, scanner, copier and fax. Professor, thank you very much for your help. However, I managed to fix my situation with the changes as follows:

  1. in the hp/scan utility on the computer. I clicked on the Scan of the computer and then the change analysis tasks...

  2. This was brought up in a popup window. I then put 'photo jpeg' highlight and click on modify.

  3. This brought another window. This is the important part. I've changed the menu presets "Photos, graphics, etc." and then that immediately under this Type 'exit' I've changed to read JPEG.

  4. everything that sounds very complex and I know I got lucky to fall on this procedure, because I'm good technically not for sure!

  However, the procedure above fixed my problem and my scans to and from the computer using Direct and wireless network were quite normal and very good. The scans are clear and bright and crisp colors. I am now very happy.

  As for the solution "self-cultivation", I'll certainly store that is far away and use it if you need. Although it was not necessary for my problem now, it's a very important protocol worth remembering.

• How to improve a scanned image of a document

  I received a scanned image (to 600ppp in TIFF format) a will written in 1782.

  Most of the ink has faded over time, where only lower 1/3 is actually readable.

  The scanned image of the will, is the best version I've seen of this will, to this day.

  However, the majority of the ink is still quite faded to not be readable/transcribed.

  Y at - it a hope of improvement in the image so that it can actually be readable, so transcription of the Act.

  Thank you for your time, consideration, and cooperation, I really appreciate.

  Hello! There are a few different methods, you can try, I would recommend save another file to modify/play with, until you reach your result desired. Play with the brightness, contrast and sharpness are some to help you improve the document.

  Below, I've posted some useful links.

  http://DCRP.CED.Berkeley.edu/resources/graphicstutorial/NewPage/Photoshop/C-2-%20Editing%2 0scanned%20images%20in%20photoshop_r1.pdf

  Please post back with questions, if any of the links above help, you can post and the image of the document so that users here can give advice.

  Janelle

• Scan images in forms app / scanner Twain

  Can you give your opinion on how to have a form * QUICKLY * scan and crop the images of a scanner passport photo size
  
  Data entry speed is essential, so I'd like to minimize the total time and keep the mouse button click on count down.
  
  I want to do as much as possible in the context of the form's window. Scanning directly in an image on the form would be nice as the current application to do this via a Twain scan
  
  The scanned image are saved in a file (either on the application server forms or in the MS-Windows client file system). The name of the file will be stored in the database and displayed in the form. I'm not sure if the image must be displayed in the form window or not.
  
  The scanned images are pictures of identity of the face size.
  
  The user must make minimum changes to the photo - cropping usually only.
  
  Is there Java beans that will help to do this? Use OLE via WEB_UTIL? Any other ideas?
  
  Thank you
  
  ~~~~~~~~~~~~~~~~~~~~~~~~
  Environment: 10g (9.0.4.0.19), database 10 g 2, client window, Linux / Unix application server, scanners are compatible Twain or can scan to file.
  ~~~~~~~~~~~~~~~~~~~~~~~~

  Find out what
  http://Groundside.com/blog/GrantRonald?title=hot_beans_to_use_in_forms&more=1&c=1&TB=1&pb=1

  There is a link to a bean to scan, even if you need to contact the developer in person to get their hands on the bean

• Why are Photos filled with images when I use it?

  I went looking for why my MacBook Pro SSD that was is so full and discovered a "photo library" which was 20 GB!  I use LR off external storage and do not use Photos, so why now has 20 GB of my iPhone in pictures?

  I do not have "iCloud library" for one of my Apple devices.  I only use 'My Photo Stream' and sometimes 'iCloud Photo Sharing' (less than 300 shared images here.)

  When you select 'My Photo Stream' in the Photos, it shows that 414 images even if my iPhone and iPad have both show the limit of 1000.  When you select all THE pictures, there are almost 8 000 images and videos here that I have never imported.

  WHY?

  How can I STOP doing this?

  Thank you

  Photo stream and iCloud photo sharing do not use your iCloud space.

  Where are told that you have used the 20 GB.

  What do you see to iCloud.com > Photos. in your browser.

• Are superposition of the images on the website. I do not get own page as I do in Explorer.

  I have a site I visit (codingcertification.org). When I go to the forum now page is all messed up. This started about 6 or 7 days ago. Now when the page loads, it is as if it were in diapers. Instead of the forum containing the side left of the page on the right are other links and images of other guests and others, the forum links are layerd on top of the material on the right so that you can hardly see what is supposed to be on the right. This mess in layers will not occur if I use Explorer. I like Firefox and that you do not want use the Explorer just to go to this site. I tried to clear my cookies, cache, preview with Javascript settings and I don't know what else. Started Firefox in safe mode and still the same issue.

  Hi - I have reset firefox and I always have this problem. I'm starting to think that it could be related to Java, because I think that the problem started after I updated to Java 7.11

• Photo, what are the criteria for images selected from the collections of photos?

  With Photo on my Mac when I'm in the view "of the years', I see all my photos. When I switch to 'Moments' I see all the photos, especially older. When I go to "collections", then I self pictures? What are the criteria for images selected in 'collections' of photos? Thank you

  You should see all the photos in the Moments, the years, Collections, unless you have the "Summarize" option enabled in Photos > Preferences > General.  Then some pictures will be omitted, but the rules are not documented.

• HP Photosmart Premium C410b: could not save the scanned images

  I use the HP Scan application and the error message: -.

  Could not save the scanned images

  appears when you try to save in a folder as a PDF or any other format.

  Ironically, if I'm going by sending to the printer and then save to PDF it works!

  I checked and I'm using 4.2.2 with El Capitan HP driver software

  Any thoughts?

  Hello

  The application from HP for your printer is not compatible with El Capitan, so the output files incorrectly recorded.

  In the Hewlett-Packard folder move HP Scan to the trash and empty it.

  Before you install and use the HP Easy Scan application below which should save the files correctly:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  Kind regards

  Shlomi

• Preview of the scanned image is good but once saved image is black with horizontal lines

  My OS is: OSX 10.9.3

  I have a HP Photosmart Premium series - C309g all-in-one machine. This machine worked well.

  Print is good.

  Copy is good.

  But now I have some analysis of the issues, probably due to an update of the OS.

  Problem: Preview of the scanned image is good, but what saving image--> the image is black with horizontal lines.

  I rumaged through the forums and you have not yet found a solution to my specific machine.

  Any help would be greatly appreciated.

  Thank you!

  Hello

  Scan using the software provided as Capture of Image or preview.

  The application of scanning HP for your printer is not available to 10.9, you use incompatible software.

  Follow these steps to get the results of the analysis required:

  http://support.HP.com/us-en/document/c04028214

  Shlomi

• Photosmart 7515 adds lines from bottom of the scanned image

  My photosmart 7515 started just add a line double about 2 inches from the left edge of all of the scanned images. NO modification of the system that I am aware. Prins computer or internet as usual. Any ideas?

  Hi Bobvan1,

  Welcome to the Forums of HP Support! I see when you scan with your HP Photosmart 7515 he started to add a double line about 2 inches from the left edge.

  I would like that you start here: vertical, lines or streaks in the Copies or Scans, please fill ALL troubleshooting steps, focusing on cleaning.

  Let me know the results, I'll watch for your reply.

  Thank you