Shadow on my monitor

Similar Questions

• Strange shadows on the Sierra of the Mac OS on an external monitor

  After upgrading to Mac OS Sierra, I noticed that there are these strange shadows. It of almost like the gradient of a shadow is not fluid and smooth:

  Screenshots:

  https://www.dropbox.com/s/dj6g3x68c9ggwez/screenshot%202016-09-24%2008.34.42.PNG? DL = 0

  https://www.dropbox.com/s/2ql2prnhn2k27rz/screenshot%202016-09-24%2008.35.43.PNG? DL = 0

  Is this normal, or is there a problem? Recommend a fix?

  I'm on Mac mini (mid-2011) and a screen LCD Dell UltraSharp U2913WM 29 inches.

  ... However, if the screenshots are picking up, it seems less like a problem of monitor and more like an incompatibility of graphics cards with MacOS Sierra?

  This seems to be quite normal. The windows are translucent, and what I see, this is the result of the image behind the window.

  It was the same thing in El Capitan (and, I suppose, Yosemite, as well).

  You can go to system preferences - > accessibility-> display and select "reduce transparency" if it bothers you.

• My monitor has shadows after every letter I type and my icons of the screen.

  My monitor has shadows after every letter I type and my icons of the screen - how can I make them disappear?

  Hello

  1. All changes made to the computer before the show?
  2. What brand / model of the computer?
  Method 1:
  This problem may occur the display drivers have not been updated. Check out the link and follow the steps to update the drivers.
  Updated a hardware driver that is not working properly
  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
  You can also visit the link and follow the steps.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
   
  Method 2:
  Check out the link and follow the steps to check if a non-Microsoft service is causing a conflict for the problem to occur.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: once the diagnosis is made, follow step 7 of section to configure the computer to start the Normal start.

• DB level monitor

  Hello.  I am an audiobook Narrator.  I had been recording in ProTools.  The recruiting company tells me that my "levels were very low" (see picture in first attachment)

  and they had "to amplify the volume 20 d" and that "BPEAK dB between - 6 dB and - 3dB" (see the second image attached).

  

  At the same time, my MBox gone bad, so I bought a rite of development interface and am moving to Logic Pro.  Is there a db in Logic Pro level indicator that would allow me to monitor db peak levels that I save?  Maybe there is a plugin or something that gives me a display like the attached screenshots.

  Please note that the company only wants "unprocessed audio only: no door compression, EQ, noise reduction, standardizing, bass-dumpster, sibilant, etc.» Audio comes with treatment limit our options in post. We strongly prefer that you do not use any treatment including compression, limiting, EQ, gate, expander, normalization, noise, whistling, of reduction - by clicking on, the shadow, denoising, bass roll-off/high-pass/shelving filters, etc.. »

  Thanks for your help.

  You can use the counters Mixers, now all faders to 0. Since the entry levels are always defined on the interface, there is no need what in logic level. I'll add a film showing later where you can find plugins for counting.

  Audio regions already appear as you want - their waveform is proportional to their level. The height of the region is 100% level (providing you do not have the waveform Zoom committed.)

  

  Film: As plugins are located in the folder logic (most of the menu drop-down shown plugin is my custom game)

  

• Satellite A100-788 - LCD turns black-shadow

  Hello to all specialists!

  I have a problem which became unbearable with the monitor of my Toshiba A100-788. When I turn on the laptop for a few seconds, works normally but would then become black and everything is in black shadow. I can see what is on the desktop if I put a strong light in front of my screen. until the monitor worked if I restarted abruptly the laptop but now no longer works. I already replaced the LCD inverter but I have the same problem (should I replace the inverter wires?). and I have already connected to an external monitor and working correctly. I'm a little desperate because I need the documents on my laptop.

  Help, please!

  Thank you!

  Hello

  It looks like a FL. inverter problem

  The FL inverter is a piece of equipment behind the frame of the LCD and this material part controls the LCD backlight.

  In my opinion it s broken and it of necessary to replace this part in order to solve this problem.

  I would recommend contacting a local Toshiba ASP. Guys should help you to replace this part.

  Good luck

• Camera gives a black shadow & drivers Win7 for Satellite A350-13 has

  Hello
  would you help me with my problems?

  1 - my camera sometimes after the launch of gives a shadow black and after a while, it works normally, but generally it works correctly.

  2 - my os is vista and I want to replace it with Windows 7. So, I have not found all the drivers updated toshiba sites. He gave me a message that they don't have what I want. Drivers that I have not found its downloads is:

  Acoustic silencer
  Assist
  Bluetooth monitor
  Bulletin Board
  Assistant bulletin board
  DVD player
  Dolby control center
  Eco utility
  Face recognition
  Firmware update
  Flash cards support utility
  Alert utility Hdd\ssd
  Hardware configuration
  Infrared driver
  Modem region Select utility
  Online product information
  PC health monitor
  PlayReady pc runtime
  Real time
  Remote Control Manager
  Utilities SD
  Service station
  Storage Manager
  Supervisor password utility
  TRS driver
  Tiles for Mobility Center
  Touchpad driver
  WPS library

  Please I want your comments quickly

  Best wishes

  You should try vista drivers as most of them are compatible with Win7. Speaking of camera, you should try to update the software for a chicony

• Satellite L350D-216: green lines, dots and shadows.

  Hi all.

  About three days ago, I bought a laptop (Toshiba L350D, published on July 09 I think) second hand on a good deal.

  I turn it on today, to discover a series of weird green lines, points and shadows, over which areas of text hard to read.

  [http://i16.photobucket.com/albums/b30/philkensebben/Capture4.png | http://i16.photobucket.com/albums/b30/philkensebben/Capture4.png]
  You can see to the right of the words and if you look close enough, also around the different letters in the Google logo.

  [http://i16.photobucket.com/albums/b30/philkensebben/Capture2.png | http://i16.photobucket.com/albums/b30/philkensebben/Capture2.png]
  Do not clear especially here (sorry), but the words greyed out in the address bar are very ghosts.

  Also, he seems to have replaced areas full of colors like grey, with a color green "dotty".
  [http://i16.photobucket.com/albums/b30/philkensebben/Capture1.png | http://i16.photobucket.com/albums/b30/philkensebben/Capture1.png]

  It seems that this issue has also spread on video, where green areas are now appearing at random points.
  [http://i16.photobucket.com/albums/b30/philkensebben/Capture5.png | http://i16.photobucket.com/albums/b30/philkensebben/Capture5.png]

  I have updated with the latest display drivers available here, who unfortunately made no difference.

  Any advice on why it suddenly decided to go and how to get rid of would be appreciated, I use the laptop for Photoshop and as you can imagine, having a surface of green and shadows is rather off-putting when I'm working.

  Toshiba L350D
  AMD Athlon X 2 Dual-Core Ql-65 2.1 GHz
  4 GB OF RAM
  HARD DRIVE 250 GB
  Windows 7 Home Premium, 32-bit edition
  ATI Radeon 3100

  Hello

  To be honest, all the screenshots displayed in your message is displayed correctly on my laptop.

  It seems that your graphics card or screen developed a problem.

  You can check if the same thing is seen on the external monitor.

  If yes then the internal display may be affected and should be replaced.

  To do this, you should get in touch with a local Toshiba technician.

  Welcome them

• If I move the monitor / cover on my DV7-3105EA will be only about 1 out of 10 times it works again

  Hello

  The monitor / cover on my DV7-3105EA plays up. If I move it or shut it down only about 1 out of 10 times it will come back alive.

  It does not show the HP or the OS from windows startup logo.

  From 1 to 10 times about half of the time I get a round red shadow logo etc.

  I guess I need to get the laptop repaired but do not know how to do in this regard.

  I live in Spain.

  Any notice received with gratitude.

  Kind regards

  jB

  Contact technical support to HP for repair, the number is

  + 34 912 754 999 elementary school
  + 34 902 012 959 high school
  + 44 (0) 203 027 7238 backup

• Shadow/progressive distortion to the right

  my screen shows a shadow/distortion right at all on my screen. I have reset the monitor and display vista setting. Still, the shadow.  I don't have a shadow when I saw my pictures. There is no shadow when I run movies or playing games. I have vista home. I have a samsung flat screen. I use an emachines T5088 model.

  onkelj,
  I suggest you start by updating your video display driver.  You should be able to get the driver of your OEM Web site.  Once you have updated this post back the results. Mike Microsoft responds to the technical support engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Shadows on the display screen

  My screen has shadows to the right of all the elements on the screen - how can I fix it?  I tried to restart and it has no effect - the shadows remain.  The show on all points of the screen - including on the desktop.

  Hello

  1. have you made changes on the computer before this problem?
  2. What is the brand and model of your computer?

  Try the following and see if it helps.

  
   
  Method 1:
  
  Troubleshoot monitor and video card: http://windows.microsoft.com/en-us/windows-vista/troubleshoot-monitor-and-video-card-problems

  Method 2:
  

  Download and install the latest driver for the display driver.
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows-vista/Update-a-driver-for-hardware-that-isn ' t-work properly

  I suggest you to meet us with the screenshot, so that it will be much easier for us to understand what is the exact as scenario and help you to fix this problem.
  Capture the screen: http://windows.microsoft.com/en-US/windows-vista/products/features/snipping-tool

  Try this link for help to use SkyDrive to upload collected files and post screen shot/image
  http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65 

• Task bar and start menu disappeared and apear as to the right of the monitor

  Start menu and taskbar appear to be on the right screen and cannot get back them.

  Hello

  · What is the shadow of brand and model of the computer?

  · Will there be any changes made on the computer before the show?

  Change the resolution of the screen on the computer and see if it helps: change the screen resolution: http://windows.microsoft.com/en-US/windows-vista/Change-screen-resolution

  For reference: get the best display on your monitor: http://windows.microsoft.com/en-US/windows-vista/Getting-the-best-display-on-your-monitor

• Troubleshooting monitor

  My monitor has shadow right at all, text, lines, etc. I have shadows not checked in the Control Panel, reduce the refresh rate of 60 Hz. It's a screen LCD of ViewSonics with a NVIDIA GeoForce 6150SE card. I tried the card void driver update.

  Hello

  1. how old is the monitor?

  Make sure that the monitor is not damaged. We recommend that you uninstall and reinstall the video card driver and check the result.
  Step 1: Uninstall the video card driver. To do this, follow these steps.
  1. click on start, type devmgmt.msc and press to enter.
  2. from the list of objects, expand display adapters.
  3. right click the sub element and click on uninstall.
  4. follow the instructions in the wizard.
  5 restart the computer for changes to take effect.

  Step 2: Install the driver.
  1. go to http://www.nvidia.com/Download/index5.aspx?lang=en-us and download the Vista compatible graphics card driver.
  2. open the download file and complete the installation.
  3. restart the computer and check the result.

  Step 3: If the problem persists, connect a different RGB cable and check the result.

  Check out these links for more information.
  1 troubleshoot monitor and video card: http://windows.microsoft.com/en-US/windows-vista/Troubleshoot-monitor-and-video-card-problems
  2 get the best display on your monitor: http://windows.microsoft.com/en-US/windows-vista/Getting-the-best-display-on-your-monitor

  For more technical support options, contact the manufacturer of the device.

  I hope this helps.

  Kind regards
  Syed
  Answers from Microsoft supports the engineer.

• Shadow text

  Text is Blur/Blur because it has a shadow behind this happens on all screens including pages web, photos, games, emails etc. Were in display and change the resolution also customization - color and appearance, but nothing does change in the display. I use Vista 32 bit Premium with a screen LCD and Athlon dual core. Had Vista installed since 2007 and this problem is only for the last 3 months. Is it a hardware problem as all efforts have failed? Do I need a technician?

  Looks like you have dealt with all the features of customization of the display under Vista, so it is probably a hardware problem (the LCD monitor or the video card), but we must first update the drivers to make sure that is not the issue.

  Go to the Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  You will need to get new drivers for the monitor and video card (you will need the exact brand and model and the number in order to get good and they must be compatible with Vista).  If you need to get pilots to leave the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. (do right now if you remember).  Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  If it does not, then it is probably a hardware problem and you need to keep a professional computer repair technician for diagnosis and repair (or replacement) - NO Geek Squad or a any these wholesale store centers but a true professional - preferably someone who you have been recommended (or you can always send it to the manufacturer for repair or replacement computer).   Remember it can be EITHER the monitor or the video card (it could be the motherboard, but I doubt that) you will need to bring or send the two elements (the monitor and the computer box).

  I hope this helps and it's just a driver problem and is not a real hardware problem (but I doubt it).

  Good luck! Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• P2715Q, displays only the shadow of what it should

  My P2715q has worked for a few days and then began to show an error and was suddenly dark.

  The monitor went dark as if the backlight (LED) was stoped working. Someone else has had this same problem?  I see just just "shadow" of what needs to be displayed.

  The light on the power button also stopped working sometime later. Reset the display settings (according to the menu) does not restore the light.

  It shows DP/n: 00GT67 REV A01.

  What is the 20-digit serial number? Do a power reset monitor. If that is not correct it, be traded.
  * Turn on the computer and monitor off
  * Disconnect all cables from the screen, including the power cable
  * Press the button of power monitor in 10 seconds
  * Reconnect all the cables from the
  * Market and re - layout test

• The speakers affect LED monitors?

  I came across this question recently and experts views on this one. Pregnant really affect LED monitors in any way?

  No they are not. CRT monitors classic shot of the beams of electrons on points of phosphorus on the back of the glass which makes them shine to produce light that you see. The intensity of the beam defined the brightness and the chemicals in the phosphorus set the color.

  However, the beam is just a fine tip and on its own would just produce a single point on the screen. The beam sweeps across of the rotation of the screen in and out as needed because of two magnetic coils on each side of the screen and the scan moves vertically because of another pair of magnetic coils up and down.

  A magnet not shielded near a CRT would add its domain to the screen scanning coils and distort the beams leading to the beam lack his target and corrupt display. If left in the position the field eventually magnetize the chassis and leave a permanent deformation. All the speakers voice coil work essentially the same way and that's why the speakers sold for the use of the computer were always described as "blind".

  LCD screens do not use any magnetic principle to create the image so don't suffer not the effect of an external field. Older LCD use the cold cathode lamps to provide the backlight and in theory a very powerful magnetic field can distort the plasma in the tube so could cause some shading while the field is present but the residual magnetism is very small in comparison, so there is no permanent effects. Backlight LED don't even have this problem. A strong field that oscillates very fast can cause a problem, but it would not apply to a magnet.

  A mistake often made is the assumption that flat screens do not suffer "burn in" often seen on CRT screens. This is not the case, if the same image is displayed for a long period he set crystals partially at all times and produce a shadow on the screen. This happens so fast on LCD screens, but it can happen. (Big flat screen TVs) plasma screens have a sensitivity to burn in somewhere between the two.